ChillOut_RGB ambient lamp project

Chillout RGB is a complete project to build a full 16.8M Color by yourserf and control it using a Serial Port with its control software or a IR remote

This is the Firmware's repositories

Complete description (it): http://blog.lampugnani.org/arduino/chillout-rgb-ambient-lamp/

RF branch

This brach will enable, with right hardware, to receive command through RF board.

Cooking List:

• Of course, an arduino or a dedicated device (like ChillOut RGB - (it) http://blog.lampugnani.org/project/chillout-rgb-new-pcb/).
• An RGB led (suitable for your driver). if you use a 20mA/channel RGB led, you only need a led and 3 limiter resistor otherwise you will need a led and suitable power controller.
• Arduino IDE.(you may need to add wirig.c in your tree folder)
• Processing IDE (optional). Using a terminal emulator (like HiperTerminal,putty (win) and minicom (linux)) you are able to send and receive command.
• Metro lib. (you may need to edit some line of code)
• VirtualWire lib.

author: Ing. M.Lampugnani