AWS Enterprise VPC Example

This infrastructure-as-code (IaC) repository is intended to help you efficiently deploy your own Enterprise VPC, as documented in Amazon Web Services VPC Guide for Illinois.

There is no one-size-fits-all blueprint for an entire VPC; while they all generally have the same building blocks, the details can vary widely depending on your individual needs. To that end, this repository provides:

1. a collection of reusable Terraform modules (under modules/) to construct the various individual components that make up an Enterprise VPC, abstracting away internal details where possible

2. a set of example IaC environments for shared networking resources (global/ and vpc/) which combine those modules and a few primitives together into a fully-functional Enterprise VPC

3. an example service environment (example-service/) which demonstrates how to look up previously-created VPC and Subnet resources by tag:Name in order to build service-oriented resources on top of them, in this case launching an EC2 instance into one of the subnets.

Note: these same building blocks can also be used to construct an Independent VPC.

If you are not familiar with Terraform, the six-part blog series A Comprehensive Guide to Terraform provides an excellent introduction, and there is also an official Introduction to Terraform which you may find helpful. That said, it should be possible to follow the Quick Start instructions below without first reading anything else.

One thing you should know: if at first you don't succeed, try 'apply' again. Terraform is usually good at handling dependencies and concurrency for you behind the scenes, but once in a while you may encounter a transient AWS API error while trying to deploy many changes at once simply because Terraform didn't wait long enough between steps.

Quick Start

---

Prerequisites

You will need:

• an AWS account which has been added to the appropriate resource shares for your desired region

  Note: as of Aug 2022 our cloud team has enabled sharing within our AWS Organization, so you no longer need to configure the Amazon Resource Names (ARNs) of these resource shares in your global/terraform.tfvars for newly added accounts

• an official name (e.g. "aws-foobar1-vpc") and IPv4 allocation (e.g. 10.x.y.0/24) for your Enterprise VPC

• a suitably configured workstation (see "Workstation Setup" further down)

• an S3 bucket with versioning enabled and a DynamoDB table with a specific schema, for remotely storing Terraform state in the S3 backend

  Caution: always obtain expert advice before rolling back or modifying a Terraform state file!

  See modules/bootstrap/README.md to create these resources (only once per AWS account).

• your own copy of the sample environment code, customized for your desired VPC and stored in your own source control repository

  Download the latest release of this public repository to use as a starting point.

  Note that you do not need your own copy of the modules/ directory; the module source paths specified in the example environments point directly to this public repository.

At minimum, you must edit the values marked with '#FIXME' comments in the following files:

• in global/backend.tf:
  • bucket
• in global/terraform.tfvars:
  • account_id
• in vpc/backend.tf:
  • bucket (2 occurrences, same value)
• in vpc/terraform.tfvars:
  • account_id
  • vpc_short_name
  • vpc_cidr_block
  • cidr_block (multiple occurrences, all different values)

You may wish to make additional changes based on your specific needs; read the comments for some hints. If you leave everything else unchanged, the result will be an Enterprise VPC in us-east-2 (Ohio) with IPv6, four subnets (one public-facing and one campus-facing in each of two Availability Zones), and no NAT Gateways, i.e. many but not all of the elements shown in the Detailed Enterprise VPC Example diagram:

Workstation Setup

You can run this code from any workstation (even a laptop); there is no need for a dedicated deployment server. Since the Terraform state is kept in S3, you can even run it from a different workstation every day, so long as you carefully follow the "golden rule of Terraform":

"The master branch of the live [source control] repository should be a 1:1 representation of what’s actually deployed in production."

If you just want to deploy your VPC as quickly as possible, you can install Terraform in AWS CloudShell like this:

mkdir -p ~/.local/bin
export VERSION=1.0.0
wget -P /tmp https://releases.hashicorp.com/terraform/${VERSION}/terraform_${VERSION}_linux_amd64.zip
unzip -d ~/.local/bin /tmp/terraform_${VERSION}_linux_amd64.zip
terraform --version

However, if you're interested in using Terraform for other infrastructure-as-code (IaC) projects beyond this one, it is worthwhile to go ahead and set up your regular workstation:

Note: these instructions were written for GNU/Linux. Some adaptation may be necessary for other operating systems.

1. Download Terraform for your system, extract the binary from the .zip archive, and put it somewhere on your PATH (e.g. /usr/local/bin/terraform or ~/.local/bin/terraform)

2. Install the AWS Command Line Interface and optionally the awscli-login plugin. One convenient way to do this is:

   pip3 install --user --upgrade awscli awscli-login
   

   Note: the --user scheme installs executables in the bin subdirectory of python3 -m site --user-base (often ~/.local/bin); make sure this directory is on your PATH.

3. Configure AWS CLI to use awscli-login:

   aws configure set plugins.login awscli_login
   

   and configure a named profile which will use Shibboleth authentication to assume an appropriate Role in your AWS account:

   aws configure --profile uiuc-tech-services-sandbox
    AWS Access Key ID [None]: 
    AWS Secret Access Key [None]: 
    Default region name [None]: us-east-2
    Default output format [None]: json
   
   aws --profile uiuc-tech-services-sandbox login configure
    ECP Endpoint URL [None]: https://shibboleth.illinois.edu/idp/profile/SAML2/SOAP/ECP
    Username [None]: yournetid
    Enable Keyring [False]: 
    Duo Factor [None]: passcode
    Role ARN [None]: arn:aws:iam::378517677616:role/TechServicesStaff
   

   The profile name "uiuc-tech-services-sandbox" is arbitrary, but the Role ARN identifies a specific role to which you have been granted access.

   Duo Factor may be auto, push, passcode, sms, or phone, or you can leave it blank in the profile to be prompted each time. See also https://github.com/techservicesillinois/awscli-login

4. Test that you can successfully interact with your AWS account:

   export AWS_PROFILE=uiuc-tech-services-sandbox
   aws login
   
   aws sts get-caller-identity
   aws iam list-account-aliases --output text
   aws ec2 describe-vpcs --output text
   
   aws logout
   unset AWS_PROFILE
   

   Safety tip: when finished, aws logout from the profile and either exit your current shell or explicitly unset AWS_PROFILE to minimize the opportunity for accidents.

Deployment Steps

1. Set the AWS_PROFILE environment variable and run aws login if needed (see above).

2. Deploy the global environment first. This creates resources which apply to the entire AWS account rather than to a single VPC.

   cd global
   terraform init
   terraform apply
   cd ..
   

   • The global environment automatically creates Simple Notification Service topics which can be used later for optional CloudWatch alarm notifications.

     If you wish to receive these alarm notifications by email, use the AWS CLI to subscribe one or more email addresses to the SNS topics (indicated by the Terraform output "vpn_monitor_arn"):

     aws sns subscribe --region us-east-2 --topic-arn arn:aws:sns:us-east-2:999999999999:vpn-monitor-topic \
      --protocol email --notification-endpoint [email protected]
     

     (then check your email and follow the confirmation instructions)

3. Next, deploy the vpc environment to create your VPC:

   cd vpc
   terraform init
   terraform apply
   

   and generate the detailed output file needed for the following step:

   terraform output -json > details.json.txt
   

4. Contact Technology Services to enable Enterprise VPC networking features.

   • Attach the details.json.txt file generated in the previous step.

   (The Core Services Transit Gateways accept new attachments automatically, but will not route to them until explicitly provisioned.)

5. By default, recursive DNS queries from instances within your VPC will be handled by AmazonProvidedDNS. If you wish to use one of the other options documented in Amazon Web Services Recursive DNS Guide for Illinois,

   • Edit vpc/terraform.tfvars to set rdns_option and core_services_resolvers

   • Deploy the vpc environment again (as above).

   Note: be sure to read and understand modules/rdns-forwarder/README.md before deploying Option 3.

Example Service

If you like, you can now deploy the example-service environment to launch an EC2 instance in one of your new public-facing subnets (note that you will need to edit example-service/backend.tf and example-service/terraform.tfvars first).

cd example-service
terraform init
terraform apply

If you supplied values for ssh_ipv4_cidr_blocks and ssh_public_key, you should now be able to connect to the public IPv4 address of the instance (output by Terraform as public_ip) with e.g.

ssh -i identity_file [email protected]

When you're done testing the example service environment, clean it up with terraform destroy.

Notice that the example-service code is not tightly coupled to the vpc code (or Terraform state); it depends only upon finding an actual VPC and Subnet with the expected tag:Name values in your AWS account.

Where To Go From Here

---

After your VPC is deployed, the next logical step is to write additional infrastructure-as-code to deploy service-oriented resources into it (as illustrated by example-service/). A few helpful hints:

• In general, IaC for service-oriented resources does not need to reside in the same source control repository as the IaC for your shared networking resources; on the contrary, it is often advantageous to maintain them separately.

• Don't change the name (i.e. tag:Name) of a VPC or Subnet once you deploy it. This allows service IaC environments to reference VPC and Subnet objects by tag:Name, with the expectation that those values will remain stable even if the objects themselves must be destroyed and rebuilt (resulting in new IDs and ARNs).

• Multiple IaC environments for the same AWS account can share the same S3 bucket for Terraform state, provided that each environment's backend configuration stanza specifies a different key value.

  Of course you can name them however you like, but this example code suggests the following pattern:

  key = "Shared Networking/global/terraform.tfstate"
  key = "Shared Networking/vpc/terraform.tfstate"
  

  where 'Shared Networking' is meant to uniquely identify this IaC repository, and 'global' or 'vpc' the specific environment directory within this repository.

  Note that the key for example-service does not begin with 'Shared Networking' because it's a separate piece of IaC which would normally reside in its own repository.

Multiple VPCs

To create a second VPC in the same AWS account, just copy the vpc/ environment directory (excluding the vpc/.terraform/ subdirectory, if any) to e.g. another-vpc/ and modify the necessary values in the new files.

IMPORTANT: don't forget to change key in the backend configuration stanza of another-vpc/backend.tf before running Terraform in the new environment!

.
├── bootstrap/ (optional)
├── global/
├── vpc/
└── another-vpc/

You may find it convenient to name the VPC environment directories after the VPCs themselves (e.g. "foobar1-vpc").

Multiple Regions

To create your new VPC in a different region, simply edit the region variable value in e.g. another-vpc/terraform.tfvars.

• Do not modify the hardcoded region names in another-vpc/backend.tf; this is the region of the S3 bucket for Terraform state, which does not depend on the region(s) of your VPCs.

• You may need to add more per-region singleton resources in global/main.tf (following the established patterns).

Multiple AWS accounts

If you wish to keep IaC for several different AWS accounts in the same repository, put the code for each AWS account in a separate top-level directory with its own set of environments, e.g.

.
├── account1/
│   ├── bootstrap/ (optional)
│   ├── global/
│   └── vpc/
└── account2/
    ├── bootstrap/ (optional)
    ├── global/
    └── vpc/

Note that each AWS account will need its own separate S3 bucket for Terraform state.

Destroying VPCs

The example vpc/main.tf uses prevent_destroy to guard against inadvertent destruction of certain resources; if you really need to destroy your entire VPC, you must first comment out each occurrence of this flag. Please note: if you destroy and subsequently recreate your VPC, you will need to contact Technology Services again to re-enable Enterprise Networking features for the new VPC.

Additionally, Terraform cannot successfully destroy a VPC until all other resources that depend on that VPC have been removed. Unfortunately, the error message returned by the AWS API method and printed by Terraform in this case does not provide any indication of which resources are the obstacle:

aws_vpc.vpc: DependencyViolation: The vpc 'vpc-abcd1234' has dependencies and cannot be deleted.
  status code: 400, request id: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx

If you find yourself in this situation, here is a set of AWS CLI commands (using bash-style variable substitution syntax) which may help you identify resources which are still associated with the VPC:

export VPC_ID=vpc-abcd1234
export VPC_REGION=us-east-2
aws ec2 describe-subnets --region $VPC_REGION --filters Name=vpc-id,Values=$VPC_ID
aws ec2 describe-security-groups --region $VPC_REGION --filters Name=vpc-id,Values=$VPC_ID --query 'SecurityGroups[?GroupName!=`default`]'
aws ec2 describe-internet-gateways --region $VPC_REGION --filters Name=attachment.vpc-id,Values=$VPC_ID
aws ec2 describe-vpn-gateways --region $VPC_REGION --filters Name=attachment.vpc-id,Values=$VPC_ID --query 'VpnGateways[?State!=`deleted`]'
aws ec2 describe-nat-gateways --region $VPC_REGION --filter Name=vpc-id,Values=$VPC_ID --query 'NatGateways[?State!=`deleted`]'
aws ec2 describe-vpc-endpoints --region $VPC_REGION --filters Name=vpc-id,Values=$VPC_ID
aws ec2 describe-vpc-peering-connections --region $VPC_REGION --filters Name=accepter-vpc-info.vpc-id,Values=$VPC_ID
aws ec2 describe-vpc-peering-connections --region $VPC_REGION --filters Name=requester-vpc-info.vpc-id,Values=$VPC_ID
aws ec2 describe-route-tables --region $VPC_REGION --filters Name=vpc-id,Values=$VPC_ID --query 'RouteTables[?Associations[?Main==`false`]]'
aws ec2 describe-network-interfaces --region $VPC_REGION --filters Name=vpc-id,Values=$VPC_ID

Versioning

---

This project adheres to Semantic Versioning. Noteworthy changes in each release are documented in CHANGELOG.md

MAJOR.MINOR.PATCH versions of this repository are immutable releases tracked with git tags, e.g. vX.Y.Z.

MAJOR.MINOR versions of this repository are tracked as git branches, e.g. vX.Y. These are mutable, but only for non-breaking changes (once vX.Y.0 has been released).

All module source paths used within the code specify a vX.Y branch.

What this means (using hypothetical version numbers) is that if you base your own live IaC on the example environment code from release v1.2.3, and later run terraform get -update (or terraform init on a different workstation),

• You will automatically receive any module changes released as v1.2.4 (which should be safe), because they appear on the v1.2 branch.
• You will not automatically receive any module changes released as v1.3.* or v2.0.* (since these changes might be incompatible with your usage and/or involve refactoring that could cause Terraform to unexpectedly destroy and recreate existing resources).

Upgrading existing deployments to a new MAJOR.MINOR version is discussed in UPGRADING.md

Known Issues

---

• none