Hass.io addon for flashing the zigbee usbstick CC2531 with this firmware
It follows this good blog entry https://lemariva.com/blog/2019/07/zigbee-flashing-cc2531-using-raspberry-pi-without-cc-debugger and flashes the firmware needed for zigbee2mqtt (see https://www.zigbee2mqtt.io/getting_started/flashing_the_cc2531.html).
- Add this repository url https://github.com/imthemichi/hassio-flashcc2531 to your home assistant addon store (see home assistant doku)
- Install from this repo the flashcc2531 addon
- Connect the CC2531 (for details)
| Raspberry Pi | CC2531 |
|---|---|
| GND | GND |
| Pin 38 | DD |
| Pin 36 | DC |
| Pin 35 | RST |
- Start the addon. It will finish it self after flashing or if an error occurs.
- Disconnect from USB