bite and segment #774
yaxuAnnotations
8 errors and 59 warnings
|
stack resolver
Process completed with exit code 1.
|
|
cabal 3.8.1.0 - ghc 9.4.1
Process completed with exit code 1.
|
|
cabal 3.4.0.0 - ghc 8.4.4
The operation was canceled.
|
|
cabal 3.4.0.0 - ghc 8.10.1
The operation was canceled.
|
|
cabal latest - ghc latest
The operation was canceled.
|
|
cabal 3.4.0.0 - ghc 9.0.1
The operation was canceled.
|
|
cabal 3.4.0.0 - ghc 8.6.5
The operation was canceled.
|
|
cabal 3.4.0.0 - ghc 8.8.3
The operation was canceled.
|
|
stack resolver
The following actions uses node12 which is deprecated and will be forced to run on node16: haskell/actions/setup@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
stack resolver
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
stack resolver
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
stack resolver
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
stack resolver
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
stack resolver
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
stack resolver
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
stack resolver
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
stack resolver
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.8.1.0 - ghc 9.4.1
The following actions uses node12 which is deprecated and will be forced to run on node16: haskell/actions/setup@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
cabal 3.8.1.0 - ghc 9.4.1
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.8.1.0 - ghc 9.4.1
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.8.1.0 - ghc 9.4.1
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.8.1.0 - ghc 9.4.1
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.8.1.0 - ghc 9.4.1
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.8.1.0 - ghc 9.4.1:
src/Sound/Tidal/Stream.hs#L370
Pattern match(es) are non-exhaustive
|
|
cabal 3.8.1.0 - ghc 9.4.1:
src/Sound/Tidal/Stream.hs#L391
Pattern match(es) are non-exhaustive
|
|
cabal 3.8.1.0 - ghc 9.4.1:
src/Sound/Tidal/Signal/Control.hs#L32
The import of ‘Data.Ratio’ is redundant
|
|
cabal 3.8.1.0 - ghc 9.4.1:
src/Sound/Tidal/Listener.hs#L41
Pattern match(es) are non-exhaustive
|
|
cabal 3.4.0.0 - ghc 8.4.4
The following actions uses node12 which is deprecated and will be forced to run on node16: haskell/actions/setup@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
cabal 3.4.0.0 - ghc 8.4.4:
src/Sound/Tidal/Signal/Control.hs#L32
The import of ‘Data.Ratio’ is redundant
|
|
cabal 3.4.0.0 - ghc 8.4.4
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 8.4.4
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 8.4.4
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 8.4.4
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 8.4.4
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 8.10.1
The following actions uses node12 which is deprecated and will be forced to run on node16: haskell/actions/setup@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
cabal 3.4.0.0 - ghc 8.10.1
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 8.10.1
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 8.10.1
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 8.10.1
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 8.10.1
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 8.10.1:
src/Sound/Tidal/Signal/Control.hs#L32
The import of ‘Data.Ratio’ is redundant
|
|
cabal latest - ghc latest
The following actions uses node12 which is deprecated and will be forced to run on node16: haskell/actions/setup@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
cabal latest - ghc latest
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal latest - ghc latest
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal latest - ghc latest
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal latest - ghc latest
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal latest - ghc latest
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 9.0.1
The following actions uses node12 which is deprecated and will be forced to run on node16: haskell/actions/setup@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
cabal 3.4.0.0 - ghc 9.0.1
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 9.0.1
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 9.0.1
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 9.0.1
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 9.0.1
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 9.0.1:
src/Sound/Tidal/Signal/Control.hs#L32
The import of ‘Data.Ratio’ is redundant
|
|
cabal 3.4.0.0 - ghc 8.6.5
The following actions uses node12 which is deprecated and will be forced to run on node16: haskell/actions/setup@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
cabal 3.4.0.0 - ghc 8.6.5
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 8.6.5
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 8.6.5
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 8.6.5
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 8.6.5
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 8.8.3
The following actions uses node12 which is deprecated and will be forced to run on node16: haskell/actions/setup@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
cabal 3.4.0.0 - ghc 8.8.3:
src/Sound/Tidal/Signal/Control.hs#L32
The import of ‘Data.Ratio’ is redundant
|
|
cabal 3.4.0.0 - ghc 8.8.3
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 8.8.3
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 8.8.3
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 8.8.3
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
cabal 3.4.0.0 - ghc 8.8.3
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|