Skip to content

timmathews/argo

Repository files navigation

Argo

Argo is a Signal K compliant server written in Go. The goal of Argo is to consume as many different sources of data as possible and convert them to Signal K on as many different transports as possible.

It currently supports WebSockets, ZeroMQ and MQTT transports and ingestion of NMEA 2000 data using an Actisense NGT-1 NMEA 2000 to USB converter or a Lawicel CAN-USB adapter. It can also read CANboat JSON from a file.

Installation

If you don't have go, you'll need to install it first. See the golang Getting Started guide for information. On Debian/Ubuntu systems apt-get install golang may be sufficient.

After that, you can install argo. Go has some opinions on how you should manage your source code workspaces, so use the commands below to get the paths right.

$ cd $GOPATH/src
$ git clone [email protected]:timmathews/argo github.com/timmathews/argo
$ cd github.com/timmathews/argo
$ ./build.sh
$ sudo ./build.sh --install

If you're not interested in hacking on Argo, then just run go get github.com/timmathews/argo. Argo will be installed in $GOPATH/bin.

By default, argo will try to use /dev/ttyUSB0 for the Actisense NGT-1, but you can change this by calling argo with a specific device like argo /dev/ttyUSB3.

There are utility scripts in the canusb and actisense folders which will install udev rules for those devices. You probably won't need these, but if for some reason your distro doesn't recognize the vendor IDs for those devices, these scripts can help.

Other Platforms

You can cross compile for other platforms by setting the GOARCH environment variable.

MIPS (OpenWRT and lots of routers):

$ export GOARCH=mips GOARCH=softfloat

ARM (Raspberry Pi and clones):

$ export GOARCH=arm GOARM=7

If your target OS is not the same as your host OS (e.g. you're compiling on Mac and targeting a Raspberry Pi), be sure to also set GOOS.

$ export GOOS=linux

Notes

You shouldn't need to install the libzmq-dev package any longer, but if your build fails, then sudo apt install libzmq-dev may help.

TODO

  • Daemonize argo and write an upstart script for it
  • Better Signal K support
  • Simplify commandline arguments and move more settings into the config file
  • Set the default path for the config file to /etc
  • Add support for reading raw CAN packet captures in Actisense and CANUSB formats (maybe others)
  • Add SocketCAN support
  • Web GUI for configuration
  • CLI for configuration

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published