Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Update Copyright #349

Closed
wants to merge 1 commit into from
Closed

Update Copyright #349

wants to merge 1 commit into from

Conversation

codepriya
Copy link

No description provided.

@codepriya codepriya closed this Oct 31, 2016
bgly pushed a commit to powervm/ibmvscsis that referenced this pull request Nov 2, 2016
BugLink: http://bugs.launchpad.net/bugs/1614565

Currently we take care to handle I_DIRTY_TIME in vfs_fsync() and
queue_io() so that inodes which have only dirty timestamps are properly
written on fsync(2) and sync(2). However there are other call sites -
most notably going through write_inode_now() - which expect inode to be
clean after WB_SYNC_ALL writeback. This is not currently true as we do
not clear I_DIRTY_TIME in __writeback_single_inode() even for
WB_SYNC_ALL writeback in all the cases. This then resulted in the
following oops because bdev_write_inode() did not clean the inode and
writeback code later stumbled over a dirty inode with detached wb.

  general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
  Modules linked in:
  CPU: 3 PID: 32 Comm: kworker/u10:1 Not tainted 4.6.0-rc3+ torvalds#349
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Workqueue: writeback wb_workfn (flush-11:0)
  task: ffff88006ccf1840 ti: ffff88006cda8000 task.ti: ffff88006cda8000
  RIP: 0010:[<ffffffff818884d2>]  [<ffffffff818884d2>]
  locked_inode_to_wb_and_lock_list+0xa2/0x750
  RSP: 0018:ffff88006cdaf7d0  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88006ccf2050
  RDX: 0000000000000000 RSI: 000000114c8a8484 RDI: 0000000000000286
  RBP: ffff88006cdaf820 R08: ffff88006ccf1840 R09: 0000000000000000
  R10: 000229915090805f R11: 0000000000000001 R12: ffff88006a72f5e0
  R13: dffffc0000000000 R14: ffffed000d4e5eed R15: ffffffff8830cf40
  FS:  0000000000000000(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000003301bf8 CR3: 000000006368f000 CR4: 00000000000006e0
  DR0: 0000000000001ec9 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
  Stack:
   ffff88006a72f680 ffff88006a72f768 ffff8800671230d8 03ff88006cdaf948
   ffff88006a72f668 ffff88006a72f5e0 ffff8800671230d8 ffff88006cdaf948
   ffff880065b90cc8 ffff880067123100 ffff88006cdaf970 ffffffff8188e12e
  Call Trace:
   [<     inline     >] inode_to_wb_and_lock_list fs/fs-writeback.c:309
   [<ffffffff8188e12e>] writeback_sb_inodes+0x4de/0x1250 fs/fs-writeback.c:1554
   [<ffffffff8188efa4>] __writeback_inodes_wb+0x104/0x1e0 fs/fs-writeback.c:1600
   [<ffffffff8188f9ae>] wb_writeback+0x7ce/0xc90 fs/fs-writeback.c:1709
   [<     inline     >] wb_do_writeback fs/fs-writeback.c:1844
   [<ffffffff81891079>] wb_workfn+0x2f9/0x1000 fs/fs-writeback.c:1884
   [<ffffffff813bcd1e>] process_one_work+0x78e/0x15c0 kernel/workqueue.c:2094
   [<ffffffff813bdc2b>] worker_thread+0xdb/0xfc0 kernel/workqueue.c:2228
   [<ffffffff813cdeef>] kthread+0x23f/0x2d0 drivers/block/aoe/aoecmd.c:1303
   [<ffffffff867bc5d2>] ret_from_fork+0x22/0x50 arch/x86/entry/entry_64.S:392
  Code: 05 94 4a a8 06 85 c0 0f 85 03 03 00 00 e8 07 15 d0 ff 41 80 3e
  00 0f 85 64 06 00 00 49 8b 9c 24 88 01 00 00 48 89 d8 48 c1 e8 03 <42>
  80 3c 28 00 0f 85 17 06 00 00 48 8b 03 48 83 c0 50 48 39 c3
  RIP  [<     inline     >] wb_get include/linux/backing-dev-defs.h:212
  RIP  [<ffffffff818884d2>] locked_inode_to_wb_and_lock_list+0xa2/0x750
  fs/fs-writeback.c:281
   RSP <ffff88006cdaf7d0>
  ---[ end trace 986a4d314dcb2694 ]---

Fix the problem by making sure __writeback_single_inode() writes inode
only with dirty times in WB_SYNC_ALL mode.

Reported-by: Dmitry Vyukov <[email protected]>
Tested-by: Laurent Dufour <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
(cherry picked from commit dc5ff2b)
Signed-off-by: Tim Gardner <[email protected]>
Acked-by: Christopher Arges <[email protected]>
Signed-off-by: Kamal Mostafa <[email protected]>
Mic92 pushed a commit to Mic92/linux that referenced this pull request Feb 4, 2019
Since section ro_after_init contains writable data located inside
.rodata section (which is read-only), resulting rodata section is
writable.  Since we don't have implementation of mark_rodata_ro() in our
arch, those section keep writable forever.

So this commit moves data.ro_after_init section from rodata to the
end of sections so that rodata section will be read-only.

Without this commit there is no issue, but valgrind somehow puzzled with
malformed sections when ro_after_init section used, and results
unresolved symbols after a valgrind run.

This commit fixes torvalds#349.

Fixes: d2ec3f7 ("pty: make ptmx file ops read-only after init")

The commit uses (d07a980, s390: add
proper __ro_after_init support) as a reference.

Signed-off-by: Hajime Tazaki <[email protected]>
fengguang pushed a commit to 0day-ci/linux that referenced this pull request Mar 15, 2021
This commit fixes the following checkpatch.pl errors:

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#285: FILE: ./hal/odm.c:285:
    +void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#287: FILE: ./hal/odm.c:287:
    +void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#289: FILE: ./hal/odm.c:289:
    +void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#291: FILE: ./hal/odm.c:291:
    +void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#305: FILE: ./hal/odm.c:305:
    +void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#309: FILE: ./hal/odm.c:309:
    +void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#311: FILE: ./hal/odm.c:311:
    +void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#313: FILE: ./hal/odm.c:313:
    +void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#315: FILE: ./hal/odm.c:315:
    +void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#323: FILE: ./hal/odm.c:323:
    +void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#325: FILE: ./hal/odm.c:325:
    +void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#327: FILE: ./hal/odm.c:327:
    +void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#330: FILE: ./hal/odm.c:330:
    +void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#338: FILE: ./hal/odm.c:338:
    +void odm_InitHybridAntDiv(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#341: FILE: ./hal/odm.c:341:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#349: FILE: ./hal/odm.c:349:
    +void odm_SetRxIdleAnt(struct DM_ODM_T * pDM_Odm, u8 Ant, bool bDualPath);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#353: FILE: ./hal/odm.c:353:
    +void odm_HwAntDiv(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#363: FILE: ./hal/odm.c:363:
    +void ODM_DMInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#393: FILE: ./hal/odm.c:393:
    +void ODM_DMWatchdog(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#420: FILE: ./hal/odm.c:420:
    +		struct DIG_T * pDM_DigTable = &pDM_Odm->DM_DigTable;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#448: FILE: ./hal/odm.c:448:
    +void ODM_CmnInfoInit(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, u32 Value)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#560: FILE: ./hal/odm.c:560:
    +void ODM_CmnInfoHook(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, void *pValue)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#689: FILE: ./hal/odm.c:689:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#717: FILE: ./hal/odm.c:717:
    +void ODM_CmnInfoUpdate(struct DM_ODM_T * pDM_Odm, u32 CmnInfo, u64 Value)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#831: FILE: ./hal/odm.c:831:
    +void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#841: FILE: ./hal/odm.c:841:
    +void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#867: FILE: ./hal/odm.c:867:
    +void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#888: FILE: ./hal/odm.c:888:
    +void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#935: FILE: ./hal/odm.c:935:
    +void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#937: FILE: ./hal/odm.c:937:
    +	struct ODM_RATE_ADAPTIVE * pOdmRA = &pDM_Odm->RateAdaptive;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#953: FILE: ./hal/odm.c:953:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1083: FILE: ./hal/odm.c:1083:
    +void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1094: FILE: ./hal/odm.c:1094:
    +void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1131: FILE: ./hal/odm.c:1131:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1137: FILE: ./hal/odm.c:1137:
    +	struct ODM_RATE_ADAPTIVE * pRA = &pDM_Odm->RateAdaptive;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1196: FILE: ./hal/odm.c:1196:
    +void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1198: FILE: ./hal/odm.c:1198:
    +	struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1204: FILE: ./hal/odm.c:1204:
    +void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1217: FILE: ./hal/odm.c:1217:
    +	struct DM_ODM_T * pDM_Odm = &(pHalData->odmpriv);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1234: FILE: ./hal/odm.c:1234:
    +void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1243: FILE: ./hal/odm.c:1243:
    +	struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1306: FILE: ./hal/odm.c:1306:
    +static u8 getSwingIndex(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1330: FILE: ./hal/odm.c:1330:
    +void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1374: FILE: ./hal/odm.c:1374:
    +void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1398: FILE: ./hal/odm.c:1398:
    +void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1400: FILE: ./hal/odm.c:1400:
    +	struct SWAT_T * pDM_SWAT_Table = &pDM_Odm->DM_SWAT_Table;

Signed-off-by: Marco Cesati <[email protected]>
fengguang pushed a commit to 0day-ci/linux that referenced this pull request Mar 16, 2021
This commit fixes the following checkpatch.pl errors:

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#285: FILE: ./hal/odm.c:285:
    +void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#287: FILE: ./hal/odm.c:287:
    +void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#289: FILE: ./hal/odm.c:289:
    +void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#291: FILE: ./hal/odm.c:291:
    +void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#305: FILE: ./hal/odm.c:305:
    +void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#309: FILE: ./hal/odm.c:309:
    +void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#311: FILE: ./hal/odm.c:311:
    +void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#313: FILE: ./hal/odm.c:313:
    +void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#315: FILE: ./hal/odm.c:315:
    +void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#323: FILE: ./hal/odm.c:323:
    +void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#325: FILE: ./hal/odm.c:325:
    +void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#327: FILE: ./hal/odm.c:327:
    +void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#330: FILE: ./hal/odm.c:330:
    +void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#338: FILE: ./hal/odm.c:338:
    +void odm_InitHybridAntDiv(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#341: FILE: ./hal/odm.c:341:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#349: FILE: ./hal/odm.c:349:
    +void odm_SetRxIdleAnt(struct DM_ODM_T * pDM_Odm, u8 Ant, bool bDualPath);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#353: FILE: ./hal/odm.c:353:
    +void odm_HwAntDiv(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#363: FILE: ./hal/odm.c:363:
    +void ODM_DMInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#393: FILE: ./hal/odm.c:393:
    +void ODM_DMWatchdog(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#420: FILE: ./hal/odm.c:420:
    +		struct DIG_T * pDM_DigTable = &pDM_Odm->DM_DigTable;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#448: FILE: ./hal/odm.c:448:
    +void ODM_CmnInfoInit(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, u32 Value)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#560: FILE: ./hal/odm.c:560:
    +void ODM_CmnInfoHook(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, void *pValue)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#689: FILE: ./hal/odm.c:689:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#717: FILE: ./hal/odm.c:717:
    +void ODM_CmnInfoUpdate(struct DM_ODM_T * pDM_Odm, u32 CmnInfo, u64 Value)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#831: FILE: ./hal/odm.c:831:
    +void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#841: FILE: ./hal/odm.c:841:
    +void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#867: FILE: ./hal/odm.c:867:
    +void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#888: FILE: ./hal/odm.c:888:
    +void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#935: FILE: ./hal/odm.c:935:
    +void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#937: FILE: ./hal/odm.c:937:
    +	struct ODM_RATE_ADAPTIVE * pOdmRA = &pDM_Odm->RateAdaptive;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#953: FILE: ./hal/odm.c:953:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1083: FILE: ./hal/odm.c:1083:
    +void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1094: FILE: ./hal/odm.c:1094:
    +void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1131: FILE: ./hal/odm.c:1131:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1137: FILE: ./hal/odm.c:1137:
    +	struct ODM_RATE_ADAPTIVE * pRA = &pDM_Odm->RateAdaptive;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1196: FILE: ./hal/odm.c:1196:
    +void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1198: FILE: ./hal/odm.c:1198:
    +	struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1204: FILE: ./hal/odm.c:1204:
    +void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1217: FILE: ./hal/odm.c:1217:
    +	struct DM_ODM_T * pDM_Odm = &(pHalData->odmpriv);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1234: FILE: ./hal/odm.c:1234:
    +void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1243: FILE: ./hal/odm.c:1243:
    +	struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1306: FILE: ./hal/odm.c:1306:
    +static u8 getSwingIndex(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1330: FILE: ./hal/odm.c:1330:
    +void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1374: FILE: ./hal/odm.c:1374:
    +void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1398: FILE: ./hal/odm.c:1398:
    +void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1400: FILE: ./hal/odm.c:1400:
    +	struct SWAT_T * pDM_SWAT_Table = &pDM_Odm->DM_SWAT_Table;

Reviewed-by: Dan Carpenter <[email protected]>
Signed-off-by: Marco Cesati <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
intel-lab-lkp pushed a commit to intel-lab-lkp/linux that referenced this pull request Oct 20, 2022
We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, it is marked as bad_inode
in ext4_iget because imode is abnormal. After initialization, imode is set
to S_IFREG. In this case, the ext4_ext_check_inode function is used for
check, and no issue is triggered. Therefore, we can determine whether an
inode needs to be initialized by checking whether the boot loader inode is
a bad inode instead of i_nlink.

Signed-off-by: Baokun Li <[email protected]>
intel-lab-lkp pushed a commit to intel-lab-lkp/linux that referenced this pull request Oct 21, 2022
We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
intel-lab-lkp pushed a commit to intel-lab-lkp/linux that referenced this pull request Oct 26, 2022
We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
intel-lab-lkp pushed a commit to intel-lab-lkp/linux that referenced this pull request Dec 7, 2022
We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
ptr1337 pushed a commit to CachyOS/linux that referenced this pull request Dec 12, 2022
We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
torvalds pushed a commit that referenced this pull request Dec 13, 2022
We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty #349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
dakkshesh07 pushed a commit to Neutron-Projects/kernel-dejavu that referenced this pull request Dec 30, 2022
We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Dakkshesh <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 4, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 4, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 4, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 4, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 4, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 4, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 4, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 4, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 4, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 4, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 4, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 4, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 4, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 4, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 4, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 4, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 4, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 17, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 17, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 17, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 17, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 17, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 17, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 17, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 17, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 17, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 17, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 17, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
kikei pushed a commit to kikei/linux that referenced this pull request Jan 17, 2023
Currently we take care to handle I_DIRTY_TIME in vfs_fsync() and
queue_io() so that inodes which have only dirty timestamps are properly
written on fsync(2) and sync(2). However there are other call sites -
most notably going through write_inode_now() - which expect inode to be
clean after WB_SYNC_ALL writeback. This is not currently true as we do
not clear I_DIRTY_TIME in __writeback_single_inode() even for
WB_SYNC_ALL writeback in all the cases. This then resulted in the
following oops because bdev_write_inode() did not clean the inode and
writeback code later stumbled over a dirty inode with detached wb.

  general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
  Modules linked in:
  CPU: 3 PID: 32 Comm: kworker/u10:1 Not tainted 4.6.0-rc3+ torvalds#349
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Workqueue: writeback wb_workfn (flush-11:0)
  task: ffff88006ccf1840 ti: ffff88006cda8000 task.ti: ffff88006cda8000
  RIP: 0010:[<ffffffff818884d2>]  [<ffffffff818884d2>]
  locked_inode_to_wb_and_lock_list+0xa2/0x750
  RSP: 0018:ffff88006cdaf7d0  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88006ccf2050
  RDX: 0000000000000000 RSI: 000000114c8a8484 RDI: 0000000000000286
  RBP: ffff88006cdaf820 R08: ffff88006ccf1840 R09: 0000000000000000
  R10: 000229915090805f R11: 0000000000000001 R12: ffff88006a72f5e0
  R13: dffffc0000000000 R14: ffffed000d4e5eed R15: ffffffff8830cf40
  FS:  0000000000000000(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000003301bf8 CR3: 000000006368f000 CR4: 00000000000006e0
  DR0: 0000000000001ec9 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
  Stack:
   ffff88006a72f680 ffff88006a72f768 ffff8800671230d8 03ff88006cdaf948
   ffff88006a72f668 ffff88006a72f5e0 ffff8800671230d8 ffff88006cdaf948
   ffff880065b90cc8 ffff880067123100 ffff88006cdaf970 ffffffff8188e12e
  Call Trace:
   [<     inline     >] inode_to_wb_and_lock_list fs/fs-writeback.c:309
   [<ffffffff8188e12e>] writeback_sb_inodes+0x4de/0x1250 fs/fs-writeback.c:1554
   [<ffffffff8188efa4>] __writeback_inodes_wb+0x104/0x1e0 fs/fs-writeback.c:1600
   [<ffffffff8188f9ae>] wb_writeback+0x7ce/0xc90 fs/fs-writeback.c:1709
   [<     inline     >] wb_do_writeback fs/fs-writeback.c:1844
   [<ffffffff81891079>] wb_workfn+0x2f9/0x1000 fs/fs-writeback.c:1884
   [<ffffffff813bcd1e>] process_one_work+0x78e/0x15c0 kernel/workqueue.c:2094
   [<ffffffff813bdc2b>] worker_thread+0xdb/0xfc0 kernel/workqueue.c:2228
   [<ffffffff813cdeef>] kthread+0x23f/0x2d0 drivers/block/aoe/aoecmd.c:1303
   [<ffffffff867bc5d2>] ret_from_fork+0x22/0x50 arch/x86/entry/entry_64.S:392
  Code: 05 94 4a a8 06 85 c0 0f 85 03 03 00 00 e8 07 15 d0 ff 41 80 3e
  00 0f 85 64 06 00 00 49 8b 9c 24 88 01 00 00 48 89 d8 48 c1 e8 03 <42>
  80 3c 28 00 0f 85 17 06 00 00 48 8b 03 48 83 c0 50 48 39 c3
  RIP  [<     inline     >] wb_get include/linux/backing-dev-defs.h:212
  RIP  [<ffffffff818884d2>] locked_inode_to_wb_and_lock_list+0xa2/0x750
  fs/fs-writeback.c:281
   RSP <ffff88006cdaf7d0>
  ---[ end trace 986a4d314dcb2694 ]---

Fix the problem by making sure __writeback_single_inode() writes inode
only with dirty times in WB_SYNC_ALL mode.

Reported-by: Dmitry Vyukov <[email protected]>
Tested-by: Laurent Dufour <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 18, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 18, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 18, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 18, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 18, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-fork that referenced this pull request Jan 18, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
ThatsItForTheOtherOne pushed a commit to Wii-Linux/wii-linux-ngx that referenced this pull request Oct 16, 2023
commit 991ed01 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:203!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty torvalds#349
 RIP: 0010:ext4_es_end.isra.0+0x34/0x42
 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203
 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff
 RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8
 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0
 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000
 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  __es_tree_search.isra.0+0x6d/0xf5
  ext4_es_cache_extent+0xfa/0x230
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_mpage_readpages+0x48e/0xe40
  ext4_readahead+0x47/0x50
  read_pages+0x82/0x530
  page_cache_ra_unbounded+0x199/0x2a0
  do_page_cache_ra+0x47/0x70
  page_cache_ra_order+0x242/0x400
  ondemand_readahead+0x1e8/0x4b0
  page_cache_sync_ra+0xf4/0x110
  filemap_get_pages+0x131/0xb20
  filemap_read+0xda/0x4b0
  generic_file_read_iter+0x13a/0x250
  ext4_file_read_iter+0x59/0x1d0
  vfs_read+0x28f/0x460
  ksys_read+0x73/0x160
  __x64_sys_read+0x1e/0x30
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.

When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
   set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.

The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.

Signed-off-by: Baokun Li <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Ulrich Hecht <[email protected]>
intel-lab-lkp pushed a commit to intel-lab-lkp/linux that referenced this pull request Oct 27, 2023
Enable cpu v4 tests for LoongArch. Currently, we don't
have BPF trampoline in LoongArch JIT, so the fentry
test `test_ptr_struct_arg` still failed, will followup.
Test result attached below:

  # ./test_progs -t verifier_sdiv,verifier_movsx,verifier_ldsx,verifier_gotol,verifier_bswap
  torvalds#316/1   verifier_bswap/BSWAP, 16:OK
  torvalds#316/2   verifier_bswap/BSWAP, 16 @unpriv:OK
  torvalds#316/3   verifier_bswap/BSWAP, 32:OK
  torvalds#316/4   verifier_bswap/BSWAP, 32 @unpriv:OK
  torvalds#316/5   verifier_bswap/BSWAP, 64:OK
  torvalds#316/6   verifier_bswap/BSWAP, 64 @unpriv:OK
  torvalds#316     verifier_bswap:OK
  torvalds#330/1   verifier_gotol/gotol, small_imm:OK
  torvalds#330/2   verifier_gotol/gotol, small_imm @unpriv:OK
  torvalds#330     verifier_gotol:OK
  torvalds#338/1   verifier_ldsx/LDSX, S8:OK
  torvalds#338/2   verifier_ldsx/LDSX, S8 @unpriv:OK
  torvalds#338/3   verifier_ldsx/LDSX, S16:OK
  torvalds#338/4   verifier_ldsx/LDSX, S16 @unpriv:OK
  torvalds#338/5   verifier_ldsx/LDSX, S32:OK
  torvalds#338/6   verifier_ldsx/LDSX, S32 @unpriv:OK
  torvalds#338/7   verifier_ldsx/LDSX, S8 range checking, privileged:OK
  torvalds#338/8   verifier_ldsx/LDSX, S16 range checking:OK
  torvalds#338/9   verifier_ldsx/LDSX, S16 range checking @unpriv:OK
  torvalds#338/10  verifier_ldsx/LDSX, S32 range checking:OK
  torvalds#338/11  verifier_ldsx/LDSX, S32 range checking @unpriv:OK
  torvalds#338     verifier_ldsx:OK
  torvalds#349/1   verifier_movsx/MOV32SX, S8:OK
  torvalds#349/2   verifier_movsx/MOV32SX, S8 @unpriv:OK
  torvalds#349/3   verifier_movsx/MOV32SX, S16:OK
  torvalds#349/4   verifier_movsx/MOV32SX, S16 @unpriv:OK
  torvalds#349/5   verifier_movsx/MOV64SX, S8:OK
  torvalds#349/6   verifier_movsx/MOV64SX, S8 @unpriv:OK
  torvalds#349/7   verifier_movsx/MOV64SX, S16:OK
  torvalds#349/8   verifier_movsx/MOV64SX, S16 @unpriv:OK
  torvalds#349/9   verifier_movsx/MOV64SX, S32:OK
  torvalds#349/10  verifier_movsx/MOV64SX, S32 @unpriv:OK
  torvalds#349/11  verifier_movsx/MOV32SX, S8, range_check:OK
  torvalds#349/12  verifier_movsx/MOV32SX, S8, range_check @unpriv:OK
  torvalds#349/13  verifier_movsx/MOV32SX, S16, range_check:OK
  torvalds#349/14  verifier_movsx/MOV32SX, S16, range_check @unpriv:OK
  torvalds#349/15  verifier_movsx/MOV32SX, S16, range_check 2:OK
  torvalds#349/16  verifier_movsx/MOV32SX, S16, range_check 2 @unpriv:OK
  torvalds#349/17  verifier_movsx/MOV64SX, S8, range_check:OK
  torvalds#349/18  verifier_movsx/MOV64SX, S8, range_check @unpriv:OK
  torvalds#349/19  verifier_movsx/MOV64SX, S16, range_check:OK
  torvalds#349/20  verifier_movsx/MOV64SX, S16, range_check @unpriv:OK
  torvalds#349/21  verifier_movsx/MOV64SX, S32, range_check:OK
  torvalds#349/22  verifier_movsx/MOV64SX, S32, range_check @unpriv:OK
  torvalds#349/23  verifier_movsx/MOV64SX, S16, R10 Sign Extension:OK
  torvalds#349/24  verifier_movsx/MOV64SX, S16, R10 Sign Extension @unpriv:OK
  torvalds#349     verifier_movsx:OK
  torvalds#361/1   verifier_sdiv/SDIV32, non-zero imm divisor, check 1:OK
  torvalds#361/2   verifier_sdiv/SDIV32, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/3   verifier_sdiv/SDIV32, non-zero imm divisor, check 2:OK
  torvalds#361/4   verifier_sdiv/SDIV32, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/5   verifier_sdiv/SDIV32, non-zero imm divisor, check 3:OK
  torvalds#361/6   verifier_sdiv/SDIV32, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/7   verifier_sdiv/SDIV32, non-zero imm divisor, check 4:OK
  torvalds#361/8   verifier_sdiv/SDIV32, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/9   verifier_sdiv/SDIV32, non-zero imm divisor, check 5:OK
  torvalds#361/10  verifier_sdiv/SDIV32, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/11  verifier_sdiv/SDIV32, non-zero imm divisor, check 6:OK
  torvalds#361/12  verifier_sdiv/SDIV32, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/13  verifier_sdiv/SDIV32, non-zero imm divisor, check 7:OK
  torvalds#361/14  verifier_sdiv/SDIV32, non-zero imm divisor, check 7 @unpriv:OK
  torvalds#361/15  verifier_sdiv/SDIV32, non-zero imm divisor, check 8:OK
  torvalds#361/16  verifier_sdiv/SDIV32, non-zero imm divisor, check 8 @unpriv:OK
  torvalds#361/17  verifier_sdiv/SDIV32, non-zero reg divisor, check 1:OK
  torvalds#361/18  verifier_sdiv/SDIV32, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/19  verifier_sdiv/SDIV32, non-zero reg divisor, check 2:OK
  torvalds#361/20  verifier_sdiv/SDIV32, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/21  verifier_sdiv/SDIV32, non-zero reg divisor, check 3:OK
  torvalds#361/22  verifier_sdiv/SDIV32, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/23  verifier_sdiv/SDIV32, non-zero reg divisor, check 4:OK
  torvalds#361/24  verifier_sdiv/SDIV32, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/25  verifier_sdiv/SDIV32, non-zero reg divisor, check 5:OK
  torvalds#361/26  verifier_sdiv/SDIV32, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/27  verifier_sdiv/SDIV32, non-zero reg divisor, check 6:OK
  torvalds#361/28  verifier_sdiv/SDIV32, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/29  verifier_sdiv/SDIV32, non-zero reg divisor, check 7:OK
  torvalds#361/30  verifier_sdiv/SDIV32, non-zero reg divisor, check 7 @unpriv:OK
  torvalds#361/31  verifier_sdiv/SDIV32, non-zero reg divisor, check 8:OK
  torvalds#361/32  verifier_sdiv/SDIV32, non-zero reg divisor, check 8 @unpriv:OK
  torvalds#361/33  verifier_sdiv/SDIV64, non-zero imm divisor, check 1:OK
  torvalds#361/34  verifier_sdiv/SDIV64, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/35  verifier_sdiv/SDIV64, non-zero imm divisor, check 2:OK
  torvalds#361/36  verifier_sdiv/SDIV64, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/37  verifier_sdiv/SDIV64, non-zero imm divisor, check 3:OK
  torvalds#361/38  verifier_sdiv/SDIV64, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/39  verifier_sdiv/SDIV64, non-zero imm divisor, check 4:OK
  torvalds#361/40  verifier_sdiv/SDIV64, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/41  verifier_sdiv/SDIV64, non-zero imm divisor, check 5:OK
  torvalds#361/42  verifier_sdiv/SDIV64, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/43  verifier_sdiv/SDIV64, non-zero imm divisor, check 6:OK
  torvalds#361/44  verifier_sdiv/SDIV64, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/45  verifier_sdiv/SDIV64, non-zero reg divisor, check 1:OK
  torvalds#361/46  verifier_sdiv/SDIV64, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/47  verifier_sdiv/SDIV64, non-zero reg divisor, check 2:OK
  torvalds#361/48  verifier_sdiv/SDIV64, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/49  verifier_sdiv/SDIV64, non-zero reg divisor, check 3:OK
  torvalds#361/50  verifier_sdiv/SDIV64, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/51  verifier_sdiv/SDIV64, non-zero reg divisor, check 4:OK
  torvalds#361/52  verifier_sdiv/SDIV64, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/53  verifier_sdiv/SDIV64, non-zero reg divisor, check 5:OK
  torvalds#361/54  verifier_sdiv/SDIV64, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/55  verifier_sdiv/SDIV64, non-zero reg divisor, check 6:OK
  torvalds#361/56  verifier_sdiv/SDIV64, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/57  verifier_sdiv/SMOD32, non-zero imm divisor, check 1:OK
  torvalds#361/58  verifier_sdiv/SMOD32, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/59  verifier_sdiv/SMOD32, non-zero imm divisor, check 2:OK
  torvalds#361/60  verifier_sdiv/SMOD32, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/61  verifier_sdiv/SMOD32, non-zero imm divisor, check 3:OK
  torvalds#361/62  verifier_sdiv/SMOD32, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/63  verifier_sdiv/SMOD32, non-zero imm divisor, check 4:OK
  torvalds#361/64  verifier_sdiv/SMOD32, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/65  verifier_sdiv/SMOD32, non-zero imm divisor, check 5:OK
  torvalds#361/66  verifier_sdiv/SMOD32, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/67  verifier_sdiv/SMOD32, non-zero imm divisor, check 6:OK
  torvalds#361/68  verifier_sdiv/SMOD32, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/69  verifier_sdiv/SMOD32, non-zero reg divisor, check 1:OK
  torvalds#361/70  verifier_sdiv/SMOD32, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/71  verifier_sdiv/SMOD32, non-zero reg divisor, check 2:OK
  torvalds#361/72  verifier_sdiv/SMOD32, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/73  verifier_sdiv/SMOD32, non-zero reg divisor, check 3:OK
  torvalds#361/74  verifier_sdiv/SMOD32, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/75  verifier_sdiv/SMOD32, non-zero reg divisor, check 4:OK
  torvalds#361/76  verifier_sdiv/SMOD32, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/77  verifier_sdiv/SMOD32, non-zero reg divisor, check 5:OK
  torvalds#361/78  verifier_sdiv/SMOD32, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/79  verifier_sdiv/SMOD32, non-zero reg divisor, check 6:OK
  torvalds#361/80  verifier_sdiv/SMOD32, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/81  verifier_sdiv/SMOD64, non-zero imm divisor, check 1:OK
  torvalds#361/82  verifier_sdiv/SMOD64, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/83  verifier_sdiv/SMOD64, non-zero imm divisor, check 2:OK
  torvalds#361/84  verifier_sdiv/SMOD64, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/85  verifier_sdiv/SMOD64, non-zero imm divisor, check 3:OK
  torvalds#361/86  verifier_sdiv/SMOD64, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/87  verifier_sdiv/SMOD64, non-zero imm divisor, check 4:OK
  torvalds#361/88  verifier_sdiv/SMOD64, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/89  verifier_sdiv/SMOD64, non-zero imm divisor, check 5:OK
  torvalds#361/90  verifier_sdiv/SMOD64, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/91  verifier_sdiv/SMOD64, non-zero imm divisor, check 6:OK
  torvalds#361/92  verifier_sdiv/SMOD64, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/93  verifier_sdiv/SMOD64, non-zero imm divisor, check 7:OK
  torvalds#361/94  verifier_sdiv/SMOD64, non-zero imm divisor, check 7 @unpriv:OK
  torvalds#361/95  verifier_sdiv/SMOD64, non-zero imm divisor, check 8:OK
  torvalds#361/96  verifier_sdiv/SMOD64, non-zero imm divisor, check 8 @unpriv:OK
  torvalds#361/97  verifier_sdiv/SMOD64, non-zero reg divisor, check 1:OK
  torvalds#361/98  verifier_sdiv/SMOD64, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/99  verifier_sdiv/SMOD64, non-zero reg divisor, check 2:OK
  torvalds#361/100 verifier_sdiv/SMOD64, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/101 verifier_sdiv/SMOD64, non-zero reg divisor, check 3:OK
  torvalds#361/102 verifier_sdiv/SMOD64, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/103 verifier_sdiv/SMOD64, non-zero reg divisor, check 4:OK
  torvalds#361/104 verifier_sdiv/SMOD64, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/105 verifier_sdiv/SMOD64, non-zero reg divisor, check 5:OK
  torvalds#361/106 verifier_sdiv/SMOD64, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/107 verifier_sdiv/SMOD64, non-zero reg divisor, check 6:OK
  torvalds#361/108 verifier_sdiv/SMOD64, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/109 verifier_sdiv/SMOD64, non-zero reg divisor, check 7:OK
  torvalds#361/110 verifier_sdiv/SMOD64, non-zero reg divisor, check 7 @unpriv:OK
  torvalds#361/111 verifier_sdiv/SMOD64, non-zero reg divisor, check 8:OK
  torvalds#361/112 verifier_sdiv/SMOD64, non-zero reg divisor, check 8 @unpriv:OK
  torvalds#361/113 verifier_sdiv/SDIV32, zero divisor:OK
  torvalds#361/114 verifier_sdiv/SDIV32, zero divisor @unpriv:OK
  torvalds#361/115 verifier_sdiv/SDIV64, zero divisor:OK
  torvalds#361/116 verifier_sdiv/SDIV64, zero divisor @unpriv:OK
  torvalds#361/117 verifier_sdiv/SMOD32, zero divisor:OK
  torvalds#361/118 verifier_sdiv/SMOD32, zero divisor @unpriv:OK
  torvalds#361/119 verifier_sdiv/SMOD64, zero divisor:OK
  torvalds#361/120 verifier_sdiv/SMOD64, zero divisor @unpriv:OK
  torvalds#361     verifier_sdiv:OK
  Summary: 5/163 PASSED, 0 SKIPPED, 0 FAILED

  # ./test_progs -t ldsx_insn
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__open 0 nsec
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__load 0 nsec
  libbpf: prog 'test_ptr_struct_arg': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'test_ptr_struct_arg': failed to auto-attach: -524
  test_map_val_and_probed_memory:FAIL:test_ldsx_insn__attach unexpected error: -524 (errno 524)
  torvalds#116/1   ldsx_insn/map_val and probed_memory:FAIL
  torvalds#116/2   ldsx_insn/ctx_member_sign_ext:OK
  torvalds#116/3   ldsx_insn/ctx_member_narrow_sign_ext:OK
  torvalds#116     ldsx_insn:FAIL

  All error logs:
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__open 0 nsec
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__load 0 nsec
  libbpf: prog 'test_ptr_struct_arg': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'test_ptr_struct_arg': failed to auto-attach: -524
  test_map_val_and_probed_memory:FAIL:test_ldsx_insn__attach unexpected error: -524 (errno 524)
  torvalds#116/1   ldsx_insn/map_val and probed_memory:FAIL
  torvalds#116     ldsx_insn:FAIL
  Summary: 0/2 PASSED, 0 SKIPPED, 1 FAILED

Signed-off-by: Hengqi Chen <[email protected]>
mj22226 pushed a commit to mj22226/linux that referenced this pull request Nov 9, 2023
Enable the cpu v4 tests for LoongArch. Currently, we don't have BPF
trampoline in LoongArch JIT, so the fentry test `test_ptr_struct_arg`
still failed, will followup.

Test result attached below:

  # ./test_progs -t verifier_sdiv,verifier_movsx,verifier_ldsx,verifier_gotol,verifier_bswap
  torvalds#316/1   verifier_bswap/BSWAP, 16:OK
  torvalds#316/2   verifier_bswap/BSWAP, 16 @unpriv:OK
  torvalds#316/3   verifier_bswap/BSWAP, 32:OK
  torvalds#316/4   verifier_bswap/BSWAP, 32 @unpriv:OK
  torvalds#316/5   verifier_bswap/BSWAP, 64:OK
  torvalds#316/6   verifier_bswap/BSWAP, 64 @unpriv:OK
  torvalds#316     verifier_bswap:OK
  torvalds#330/1   verifier_gotol/gotol, small_imm:OK
  torvalds#330/2   verifier_gotol/gotol, small_imm @unpriv:OK
  torvalds#330     verifier_gotol:OK
  torvalds#338/1   verifier_ldsx/LDSX, S8:OK
  torvalds#338/2   verifier_ldsx/LDSX, S8 @unpriv:OK
  torvalds#338/3   verifier_ldsx/LDSX, S16:OK
  torvalds#338/4   verifier_ldsx/LDSX, S16 @unpriv:OK
  torvalds#338/5   verifier_ldsx/LDSX, S32:OK
  torvalds#338/6   verifier_ldsx/LDSX, S32 @unpriv:OK
  torvalds#338/7   verifier_ldsx/LDSX, S8 range checking, privileged:OK
  torvalds#338/8   verifier_ldsx/LDSX, S16 range checking:OK
  torvalds#338/9   verifier_ldsx/LDSX, S16 range checking @unpriv:OK
  torvalds#338/10  verifier_ldsx/LDSX, S32 range checking:OK
  torvalds#338/11  verifier_ldsx/LDSX, S32 range checking @unpriv:OK
  torvalds#338     verifier_ldsx:OK
  torvalds#349/1   verifier_movsx/MOV32SX, S8:OK
  torvalds#349/2   verifier_movsx/MOV32SX, S8 @unpriv:OK
  torvalds#349/3   verifier_movsx/MOV32SX, S16:OK
  torvalds#349/4   verifier_movsx/MOV32SX, S16 @unpriv:OK
  torvalds#349/5   verifier_movsx/MOV64SX, S8:OK
  torvalds#349/6   verifier_movsx/MOV64SX, S8 @unpriv:OK
  torvalds#349/7   verifier_movsx/MOV64SX, S16:OK
  torvalds#349/8   verifier_movsx/MOV64SX, S16 @unpriv:OK
  torvalds#349/9   verifier_movsx/MOV64SX, S32:OK
  torvalds#349/10  verifier_movsx/MOV64SX, S32 @unpriv:OK
  torvalds#349/11  verifier_movsx/MOV32SX, S8, range_check:OK
  torvalds#349/12  verifier_movsx/MOV32SX, S8, range_check @unpriv:OK
  torvalds#349/13  verifier_movsx/MOV32SX, S16, range_check:OK
  torvalds#349/14  verifier_movsx/MOV32SX, S16, range_check @unpriv:OK
  torvalds#349/15  verifier_movsx/MOV32SX, S16, range_check 2:OK
  torvalds#349/16  verifier_movsx/MOV32SX, S16, range_check 2 @unpriv:OK
  torvalds#349/17  verifier_movsx/MOV64SX, S8, range_check:OK
  torvalds#349/18  verifier_movsx/MOV64SX, S8, range_check @unpriv:OK
  torvalds#349/19  verifier_movsx/MOV64SX, S16, range_check:OK
  torvalds#349/20  verifier_movsx/MOV64SX, S16, range_check @unpriv:OK
  torvalds#349/21  verifier_movsx/MOV64SX, S32, range_check:OK
  torvalds#349/22  verifier_movsx/MOV64SX, S32, range_check @unpriv:OK
  torvalds#349/23  verifier_movsx/MOV64SX, S16, R10 Sign Extension:OK
  torvalds#349/24  verifier_movsx/MOV64SX, S16, R10 Sign Extension @unpriv:OK
  torvalds#349     verifier_movsx:OK
  torvalds#361/1   verifier_sdiv/SDIV32, non-zero imm divisor, check 1:OK
  torvalds#361/2   verifier_sdiv/SDIV32, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/3   verifier_sdiv/SDIV32, non-zero imm divisor, check 2:OK
  torvalds#361/4   verifier_sdiv/SDIV32, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/5   verifier_sdiv/SDIV32, non-zero imm divisor, check 3:OK
  torvalds#361/6   verifier_sdiv/SDIV32, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/7   verifier_sdiv/SDIV32, non-zero imm divisor, check 4:OK
  torvalds#361/8   verifier_sdiv/SDIV32, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/9   verifier_sdiv/SDIV32, non-zero imm divisor, check 5:OK
  torvalds#361/10  verifier_sdiv/SDIV32, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/11  verifier_sdiv/SDIV32, non-zero imm divisor, check 6:OK
  torvalds#361/12  verifier_sdiv/SDIV32, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/13  verifier_sdiv/SDIV32, non-zero imm divisor, check 7:OK
  torvalds#361/14  verifier_sdiv/SDIV32, non-zero imm divisor, check 7 @unpriv:OK
  torvalds#361/15  verifier_sdiv/SDIV32, non-zero imm divisor, check 8:OK
  torvalds#361/16  verifier_sdiv/SDIV32, non-zero imm divisor, check 8 @unpriv:OK
  torvalds#361/17  verifier_sdiv/SDIV32, non-zero reg divisor, check 1:OK
  torvalds#361/18  verifier_sdiv/SDIV32, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/19  verifier_sdiv/SDIV32, non-zero reg divisor, check 2:OK
  torvalds#361/20  verifier_sdiv/SDIV32, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/21  verifier_sdiv/SDIV32, non-zero reg divisor, check 3:OK
  torvalds#361/22  verifier_sdiv/SDIV32, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/23  verifier_sdiv/SDIV32, non-zero reg divisor, check 4:OK
  torvalds#361/24  verifier_sdiv/SDIV32, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/25  verifier_sdiv/SDIV32, non-zero reg divisor, check 5:OK
  torvalds#361/26  verifier_sdiv/SDIV32, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/27  verifier_sdiv/SDIV32, non-zero reg divisor, check 6:OK
  torvalds#361/28  verifier_sdiv/SDIV32, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/29  verifier_sdiv/SDIV32, non-zero reg divisor, check 7:OK
  torvalds#361/30  verifier_sdiv/SDIV32, non-zero reg divisor, check 7 @unpriv:OK
  torvalds#361/31  verifier_sdiv/SDIV32, non-zero reg divisor, check 8:OK
  torvalds#361/32  verifier_sdiv/SDIV32, non-zero reg divisor, check 8 @unpriv:OK
  torvalds#361/33  verifier_sdiv/SDIV64, non-zero imm divisor, check 1:OK
  torvalds#361/34  verifier_sdiv/SDIV64, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/35  verifier_sdiv/SDIV64, non-zero imm divisor, check 2:OK
  torvalds#361/36  verifier_sdiv/SDIV64, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/37  verifier_sdiv/SDIV64, non-zero imm divisor, check 3:OK
  torvalds#361/38  verifier_sdiv/SDIV64, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/39  verifier_sdiv/SDIV64, non-zero imm divisor, check 4:OK
  torvalds#361/40  verifier_sdiv/SDIV64, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/41  verifier_sdiv/SDIV64, non-zero imm divisor, check 5:OK
  torvalds#361/42  verifier_sdiv/SDIV64, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/43  verifier_sdiv/SDIV64, non-zero imm divisor, check 6:OK
  torvalds#361/44  verifier_sdiv/SDIV64, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/45  verifier_sdiv/SDIV64, non-zero reg divisor, check 1:OK
  torvalds#361/46  verifier_sdiv/SDIV64, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/47  verifier_sdiv/SDIV64, non-zero reg divisor, check 2:OK
  torvalds#361/48  verifier_sdiv/SDIV64, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/49  verifier_sdiv/SDIV64, non-zero reg divisor, check 3:OK
  torvalds#361/50  verifier_sdiv/SDIV64, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/51  verifier_sdiv/SDIV64, non-zero reg divisor, check 4:OK
  torvalds#361/52  verifier_sdiv/SDIV64, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/53  verifier_sdiv/SDIV64, non-zero reg divisor, check 5:OK
  torvalds#361/54  verifier_sdiv/SDIV64, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/55  verifier_sdiv/SDIV64, non-zero reg divisor, check 6:OK
  torvalds#361/56  verifier_sdiv/SDIV64, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/57  verifier_sdiv/SMOD32, non-zero imm divisor, check 1:OK
  torvalds#361/58  verifier_sdiv/SMOD32, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/59  verifier_sdiv/SMOD32, non-zero imm divisor, check 2:OK
  torvalds#361/60  verifier_sdiv/SMOD32, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/61  verifier_sdiv/SMOD32, non-zero imm divisor, check 3:OK
  torvalds#361/62  verifier_sdiv/SMOD32, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/63  verifier_sdiv/SMOD32, non-zero imm divisor, check 4:OK
  torvalds#361/64  verifier_sdiv/SMOD32, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/65  verifier_sdiv/SMOD32, non-zero imm divisor, check 5:OK
  torvalds#361/66  verifier_sdiv/SMOD32, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/67  verifier_sdiv/SMOD32, non-zero imm divisor, check 6:OK
  torvalds#361/68  verifier_sdiv/SMOD32, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/69  verifier_sdiv/SMOD32, non-zero reg divisor, check 1:OK
  torvalds#361/70  verifier_sdiv/SMOD32, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/71  verifier_sdiv/SMOD32, non-zero reg divisor, check 2:OK
  torvalds#361/72  verifier_sdiv/SMOD32, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/73  verifier_sdiv/SMOD32, non-zero reg divisor, check 3:OK
  torvalds#361/74  verifier_sdiv/SMOD32, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/75  verifier_sdiv/SMOD32, non-zero reg divisor, check 4:OK
  torvalds#361/76  verifier_sdiv/SMOD32, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/77  verifier_sdiv/SMOD32, non-zero reg divisor, check 5:OK
  torvalds#361/78  verifier_sdiv/SMOD32, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/79  verifier_sdiv/SMOD32, non-zero reg divisor, check 6:OK
  torvalds#361/80  verifier_sdiv/SMOD32, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/81  verifier_sdiv/SMOD64, non-zero imm divisor, check 1:OK
  torvalds#361/82  verifier_sdiv/SMOD64, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/83  verifier_sdiv/SMOD64, non-zero imm divisor, check 2:OK
  torvalds#361/84  verifier_sdiv/SMOD64, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/85  verifier_sdiv/SMOD64, non-zero imm divisor, check 3:OK
  torvalds#361/86  verifier_sdiv/SMOD64, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/87  verifier_sdiv/SMOD64, non-zero imm divisor, check 4:OK
  torvalds#361/88  verifier_sdiv/SMOD64, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/89  verifier_sdiv/SMOD64, non-zero imm divisor, check 5:OK
  torvalds#361/90  verifier_sdiv/SMOD64, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/91  verifier_sdiv/SMOD64, non-zero imm divisor, check 6:OK
  torvalds#361/92  verifier_sdiv/SMOD64, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/93  verifier_sdiv/SMOD64, non-zero imm divisor, check 7:OK
  torvalds#361/94  verifier_sdiv/SMOD64, non-zero imm divisor, check 7 @unpriv:OK
  torvalds#361/95  verifier_sdiv/SMOD64, non-zero imm divisor, check 8:OK
  torvalds#361/96  verifier_sdiv/SMOD64, non-zero imm divisor, check 8 @unpriv:OK
  torvalds#361/97  verifier_sdiv/SMOD64, non-zero reg divisor, check 1:OK
  torvalds#361/98  verifier_sdiv/SMOD64, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/99  verifier_sdiv/SMOD64, non-zero reg divisor, check 2:OK
  torvalds#361/100 verifier_sdiv/SMOD64, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/101 verifier_sdiv/SMOD64, non-zero reg divisor, check 3:OK
  torvalds#361/102 verifier_sdiv/SMOD64, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/103 verifier_sdiv/SMOD64, non-zero reg divisor, check 4:OK
  torvalds#361/104 verifier_sdiv/SMOD64, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/105 verifier_sdiv/SMOD64, non-zero reg divisor, check 5:OK
  torvalds#361/106 verifier_sdiv/SMOD64, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/107 verifier_sdiv/SMOD64, non-zero reg divisor, check 6:OK
  torvalds#361/108 verifier_sdiv/SMOD64, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/109 verifier_sdiv/SMOD64, non-zero reg divisor, check 7:OK
  torvalds#361/110 verifier_sdiv/SMOD64, non-zero reg divisor, check 7 @unpriv:OK
  torvalds#361/111 verifier_sdiv/SMOD64, non-zero reg divisor, check 8:OK
  torvalds#361/112 verifier_sdiv/SMOD64, non-zero reg divisor, check 8 @unpriv:OK
  torvalds#361/113 verifier_sdiv/SDIV32, zero divisor:OK
  torvalds#361/114 verifier_sdiv/SDIV32, zero divisor @unpriv:OK
  torvalds#361/115 verifier_sdiv/SDIV64, zero divisor:OK
  torvalds#361/116 verifier_sdiv/SDIV64, zero divisor @unpriv:OK
  torvalds#361/117 verifier_sdiv/SMOD32, zero divisor:OK
  torvalds#361/118 verifier_sdiv/SMOD32, zero divisor @unpriv:OK
  torvalds#361/119 verifier_sdiv/SMOD64, zero divisor:OK
  torvalds#361/120 verifier_sdiv/SMOD64, zero divisor @unpriv:OK
  torvalds#361     verifier_sdiv:OK
  Summary: 5/163 PASSED, 0 SKIPPED, 0 FAILED

  # ./test_progs -t ldsx_insn
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__open 0 nsec
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__load 0 nsec
  libbpf: prog 'test_ptr_struct_arg': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'test_ptr_struct_arg': failed to auto-attach: -524
  test_map_val_and_probed_memory:FAIL:test_ldsx_insn__attach unexpected error: -524 (errno 524)
  torvalds#116/1   ldsx_insn/map_val and probed_memory:FAIL
  torvalds#116/2   ldsx_insn/ctx_member_sign_ext:OK
  torvalds#116/3   ldsx_insn/ctx_member_narrow_sign_ext:OK
  torvalds#116     ldsx_insn:FAIL

  All error logs:
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__open 0 nsec
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__load 0 nsec
  libbpf: prog 'test_ptr_struct_arg': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'test_ptr_struct_arg': failed to auto-attach: -524
  test_map_val_and_probed_memory:FAIL:test_ldsx_insn__attach unexpected error: -524 (errno 524)
  torvalds#116/1   ldsx_insn/map_val and probed_memory:FAIL
  torvalds#116     ldsx_insn:FAIL
  Summary: 0/2 PASSED, 0 SKIPPED, 1 FAILED

Signed-off-by: Hengqi Chen <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
yetist pushed a commit to loongarchlinux/linux that referenced this pull request Nov 13, 2023
Enable the cpu v4 tests for LoongArch. Currently, we don't have BPF
trampoline in LoongArch JIT, so the fentry test `test_ptr_struct_arg`
still failed, will followup.

Test result attached below:

  # ./test_progs -t verifier_sdiv,verifier_movsx,verifier_ldsx,verifier_gotol,verifier_bswap
  torvalds#316/1   verifier_bswap/BSWAP, 16:OK
  torvalds#316/2   verifier_bswap/BSWAP, 16 @unpriv:OK
  torvalds#316/3   verifier_bswap/BSWAP, 32:OK
  torvalds#316/4   verifier_bswap/BSWAP, 32 @unpriv:OK
  torvalds#316/5   verifier_bswap/BSWAP, 64:OK
  torvalds#316/6   verifier_bswap/BSWAP, 64 @unpriv:OK
  torvalds#316     verifier_bswap:OK
  torvalds#330/1   verifier_gotol/gotol, small_imm:OK
  torvalds#330/2   verifier_gotol/gotol, small_imm @unpriv:OK
  torvalds#330     verifier_gotol:OK
  torvalds#338/1   verifier_ldsx/LDSX, S8:OK
  torvalds#338/2   verifier_ldsx/LDSX, S8 @unpriv:OK
  torvalds#338/3   verifier_ldsx/LDSX, S16:OK
  torvalds#338/4   verifier_ldsx/LDSX, S16 @unpriv:OK
  torvalds#338/5   verifier_ldsx/LDSX, S32:OK
  torvalds#338/6   verifier_ldsx/LDSX, S32 @unpriv:OK
  torvalds#338/7   verifier_ldsx/LDSX, S8 range checking, privileged:OK
  torvalds#338/8   verifier_ldsx/LDSX, S16 range checking:OK
  torvalds#338/9   verifier_ldsx/LDSX, S16 range checking @unpriv:OK
  torvalds#338/10  verifier_ldsx/LDSX, S32 range checking:OK
  torvalds#338/11  verifier_ldsx/LDSX, S32 range checking @unpriv:OK
  torvalds#338     verifier_ldsx:OK
  torvalds#349/1   verifier_movsx/MOV32SX, S8:OK
  torvalds#349/2   verifier_movsx/MOV32SX, S8 @unpriv:OK
  torvalds#349/3   verifier_movsx/MOV32SX, S16:OK
  torvalds#349/4   verifier_movsx/MOV32SX, S16 @unpriv:OK
  torvalds#349/5   verifier_movsx/MOV64SX, S8:OK
  torvalds#349/6   verifier_movsx/MOV64SX, S8 @unpriv:OK
  torvalds#349/7   verifier_movsx/MOV64SX, S16:OK
  torvalds#349/8   verifier_movsx/MOV64SX, S16 @unpriv:OK
  torvalds#349/9   verifier_movsx/MOV64SX, S32:OK
  torvalds#349/10  verifier_movsx/MOV64SX, S32 @unpriv:OK
  torvalds#349/11  verifier_movsx/MOV32SX, S8, range_check:OK
  torvalds#349/12  verifier_movsx/MOV32SX, S8, range_check @unpriv:OK
  torvalds#349/13  verifier_movsx/MOV32SX, S16, range_check:OK
  torvalds#349/14  verifier_movsx/MOV32SX, S16, range_check @unpriv:OK
  torvalds#349/15  verifier_movsx/MOV32SX, S16, range_check 2:OK
  torvalds#349/16  verifier_movsx/MOV32SX, S16, range_check 2 @unpriv:OK
  torvalds#349/17  verifier_movsx/MOV64SX, S8, range_check:OK
  torvalds#349/18  verifier_movsx/MOV64SX, S8, range_check @unpriv:OK
  torvalds#349/19  verifier_movsx/MOV64SX, S16, range_check:OK
  torvalds#349/20  verifier_movsx/MOV64SX, S16, range_check @unpriv:OK
  torvalds#349/21  verifier_movsx/MOV64SX, S32, range_check:OK
  torvalds#349/22  verifier_movsx/MOV64SX, S32, range_check @unpriv:OK
  torvalds#349/23  verifier_movsx/MOV64SX, S16, R10 Sign Extension:OK
  torvalds#349/24  verifier_movsx/MOV64SX, S16, R10 Sign Extension @unpriv:OK
  torvalds#349     verifier_movsx:OK
  torvalds#361/1   verifier_sdiv/SDIV32, non-zero imm divisor, check 1:OK
  torvalds#361/2   verifier_sdiv/SDIV32, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/3   verifier_sdiv/SDIV32, non-zero imm divisor, check 2:OK
  torvalds#361/4   verifier_sdiv/SDIV32, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/5   verifier_sdiv/SDIV32, non-zero imm divisor, check 3:OK
  torvalds#361/6   verifier_sdiv/SDIV32, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/7   verifier_sdiv/SDIV32, non-zero imm divisor, check 4:OK
  torvalds#361/8   verifier_sdiv/SDIV32, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/9   verifier_sdiv/SDIV32, non-zero imm divisor, check 5:OK
  torvalds#361/10  verifier_sdiv/SDIV32, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/11  verifier_sdiv/SDIV32, non-zero imm divisor, check 6:OK
  torvalds#361/12  verifier_sdiv/SDIV32, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/13  verifier_sdiv/SDIV32, non-zero imm divisor, check 7:OK
  torvalds#361/14  verifier_sdiv/SDIV32, non-zero imm divisor, check 7 @unpriv:OK
  torvalds#361/15  verifier_sdiv/SDIV32, non-zero imm divisor, check 8:OK
  torvalds#361/16  verifier_sdiv/SDIV32, non-zero imm divisor, check 8 @unpriv:OK
  torvalds#361/17  verifier_sdiv/SDIV32, non-zero reg divisor, check 1:OK
  torvalds#361/18  verifier_sdiv/SDIV32, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/19  verifier_sdiv/SDIV32, non-zero reg divisor, check 2:OK
  torvalds#361/20  verifier_sdiv/SDIV32, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/21  verifier_sdiv/SDIV32, non-zero reg divisor, check 3:OK
  torvalds#361/22  verifier_sdiv/SDIV32, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/23  verifier_sdiv/SDIV32, non-zero reg divisor, check 4:OK
  torvalds#361/24  verifier_sdiv/SDIV32, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/25  verifier_sdiv/SDIV32, non-zero reg divisor, check 5:OK
  torvalds#361/26  verifier_sdiv/SDIV32, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/27  verifier_sdiv/SDIV32, non-zero reg divisor, check 6:OK
  torvalds#361/28  verifier_sdiv/SDIV32, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/29  verifier_sdiv/SDIV32, non-zero reg divisor, check 7:OK
  torvalds#361/30  verifier_sdiv/SDIV32, non-zero reg divisor, check 7 @unpriv:OK
  torvalds#361/31  verifier_sdiv/SDIV32, non-zero reg divisor, check 8:OK
  torvalds#361/32  verifier_sdiv/SDIV32, non-zero reg divisor, check 8 @unpriv:OK
  torvalds#361/33  verifier_sdiv/SDIV64, non-zero imm divisor, check 1:OK
  torvalds#361/34  verifier_sdiv/SDIV64, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/35  verifier_sdiv/SDIV64, non-zero imm divisor, check 2:OK
  torvalds#361/36  verifier_sdiv/SDIV64, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/37  verifier_sdiv/SDIV64, non-zero imm divisor, check 3:OK
  torvalds#361/38  verifier_sdiv/SDIV64, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/39  verifier_sdiv/SDIV64, non-zero imm divisor, check 4:OK
  torvalds#361/40  verifier_sdiv/SDIV64, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/41  verifier_sdiv/SDIV64, non-zero imm divisor, check 5:OK
  torvalds#361/42  verifier_sdiv/SDIV64, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/43  verifier_sdiv/SDIV64, non-zero imm divisor, check 6:OK
  torvalds#361/44  verifier_sdiv/SDIV64, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/45  verifier_sdiv/SDIV64, non-zero reg divisor, check 1:OK
  torvalds#361/46  verifier_sdiv/SDIV64, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/47  verifier_sdiv/SDIV64, non-zero reg divisor, check 2:OK
  torvalds#361/48  verifier_sdiv/SDIV64, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/49  verifier_sdiv/SDIV64, non-zero reg divisor, check 3:OK
  torvalds#361/50  verifier_sdiv/SDIV64, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/51  verifier_sdiv/SDIV64, non-zero reg divisor, check 4:OK
  torvalds#361/52  verifier_sdiv/SDIV64, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/53  verifier_sdiv/SDIV64, non-zero reg divisor, check 5:OK
  torvalds#361/54  verifier_sdiv/SDIV64, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/55  verifier_sdiv/SDIV64, non-zero reg divisor, check 6:OK
  torvalds#361/56  verifier_sdiv/SDIV64, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/57  verifier_sdiv/SMOD32, non-zero imm divisor, check 1:OK
  torvalds#361/58  verifier_sdiv/SMOD32, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/59  verifier_sdiv/SMOD32, non-zero imm divisor, check 2:OK
  torvalds#361/60  verifier_sdiv/SMOD32, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/61  verifier_sdiv/SMOD32, non-zero imm divisor, check 3:OK
  torvalds#361/62  verifier_sdiv/SMOD32, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/63  verifier_sdiv/SMOD32, non-zero imm divisor, check 4:OK
  torvalds#361/64  verifier_sdiv/SMOD32, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/65  verifier_sdiv/SMOD32, non-zero imm divisor, check 5:OK
  torvalds#361/66  verifier_sdiv/SMOD32, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/67  verifier_sdiv/SMOD32, non-zero imm divisor, check 6:OK
  torvalds#361/68  verifier_sdiv/SMOD32, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/69  verifier_sdiv/SMOD32, non-zero reg divisor, check 1:OK
  torvalds#361/70  verifier_sdiv/SMOD32, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/71  verifier_sdiv/SMOD32, non-zero reg divisor, check 2:OK
  torvalds#361/72  verifier_sdiv/SMOD32, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/73  verifier_sdiv/SMOD32, non-zero reg divisor, check 3:OK
  torvalds#361/74  verifier_sdiv/SMOD32, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/75  verifier_sdiv/SMOD32, non-zero reg divisor, check 4:OK
  torvalds#361/76  verifier_sdiv/SMOD32, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/77  verifier_sdiv/SMOD32, non-zero reg divisor, check 5:OK
  torvalds#361/78  verifier_sdiv/SMOD32, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/79  verifier_sdiv/SMOD32, non-zero reg divisor, check 6:OK
  torvalds#361/80  verifier_sdiv/SMOD32, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/81  verifier_sdiv/SMOD64, non-zero imm divisor, check 1:OK
  torvalds#361/82  verifier_sdiv/SMOD64, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/83  verifier_sdiv/SMOD64, non-zero imm divisor, check 2:OK
  torvalds#361/84  verifier_sdiv/SMOD64, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/85  verifier_sdiv/SMOD64, non-zero imm divisor, check 3:OK
  torvalds#361/86  verifier_sdiv/SMOD64, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/87  verifier_sdiv/SMOD64, non-zero imm divisor, check 4:OK
  torvalds#361/88  verifier_sdiv/SMOD64, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/89  verifier_sdiv/SMOD64, non-zero imm divisor, check 5:OK
  torvalds#361/90  verifier_sdiv/SMOD64, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/91  verifier_sdiv/SMOD64, non-zero imm divisor, check 6:OK
  torvalds#361/92  verifier_sdiv/SMOD64, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/93  verifier_sdiv/SMOD64, non-zero imm divisor, check 7:OK
  torvalds#361/94  verifier_sdiv/SMOD64, non-zero imm divisor, check 7 @unpriv:OK
  torvalds#361/95  verifier_sdiv/SMOD64, non-zero imm divisor, check 8:OK
  torvalds#361/96  verifier_sdiv/SMOD64, non-zero imm divisor, check 8 @unpriv:OK
  torvalds#361/97  verifier_sdiv/SMOD64, non-zero reg divisor, check 1:OK
  torvalds#361/98  verifier_sdiv/SMOD64, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/99  verifier_sdiv/SMOD64, non-zero reg divisor, check 2:OK
  torvalds#361/100 verifier_sdiv/SMOD64, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/101 verifier_sdiv/SMOD64, non-zero reg divisor, check 3:OK
  torvalds#361/102 verifier_sdiv/SMOD64, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/103 verifier_sdiv/SMOD64, non-zero reg divisor, check 4:OK
  torvalds#361/104 verifier_sdiv/SMOD64, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/105 verifier_sdiv/SMOD64, non-zero reg divisor, check 5:OK
  torvalds#361/106 verifier_sdiv/SMOD64, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/107 verifier_sdiv/SMOD64, non-zero reg divisor, check 6:OK
  torvalds#361/108 verifier_sdiv/SMOD64, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/109 verifier_sdiv/SMOD64, non-zero reg divisor, check 7:OK
  torvalds#361/110 verifier_sdiv/SMOD64, non-zero reg divisor, check 7 @unpriv:OK
  torvalds#361/111 verifier_sdiv/SMOD64, non-zero reg divisor, check 8:OK
  torvalds#361/112 verifier_sdiv/SMOD64, non-zero reg divisor, check 8 @unpriv:OK
  torvalds#361/113 verifier_sdiv/SDIV32, zero divisor:OK
  torvalds#361/114 verifier_sdiv/SDIV32, zero divisor @unpriv:OK
  torvalds#361/115 verifier_sdiv/SDIV64, zero divisor:OK
  torvalds#361/116 verifier_sdiv/SDIV64, zero divisor @unpriv:OK
  torvalds#361/117 verifier_sdiv/SMOD32, zero divisor:OK
  torvalds#361/118 verifier_sdiv/SMOD32, zero divisor @unpriv:OK
  torvalds#361/119 verifier_sdiv/SMOD64, zero divisor:OK
  torvalds#361/120 verifier_sdiv/SMOD64, zero divisor @unpriv:OK
  torvalds#361     verifier_sdiv:OK
  Summary: 5/163 PASSED, 0 SKIPPED, 0 FAILED

  # ./test_progs -t ldsx_insn
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__open 0 nsec
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__load 0 nsec
  libbpf: prog 'test_ptr_struct_arg': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'test_ptr_struct_arg': failed to auto-attach: -524
  test_map_val_and_probed_memory:FAIL:test_ldsx_insn__attach unexpected error: -524 (errno 524)
  torvalds#116/1   ldsx_insn/map_val and probed_memory:FAIL
  torvalds#116/2   ldsx_insn/ctx_member_sign_ext:OK
  torvalds#116/3   ldsx_insn/ctx_member_narrow_sign_ext:OK
  torvalds#116     ldsx_insn:FAIL

  All error logs:
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__open 0 nsec
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__load 0 nsec
  libbpf: prog 'test_ptr_struct_arg': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'test_ptr_struct_arg': failed to auto-attach: -524
  test_map_val_and_probed_memory:FAIL:test_ldsx_insn__attach unexpected error: -524 (errno 524)
  torvalds#116/1   ldsx_insn/map_val and probed_memory:FAIL
  torvalds#116     ldsx_insn:FAIL
  Summary: 0/2 PASSED, 0 SKIPPED, 1 FAILED

Signed-off-by: Hengqi Chen <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
RevySR pushed a commit to RevySR/linux that referenced this pull request Nov 23, 2023
Enable the cpu v4 tests for LoongArch. Currently, we don't have BPF
trampoline in LoongArch JIT, so the fentry test `test_ptr_struct_arg`
still failed, will followup.

Test result attached below:

  # ./test_progs -t verifier_sdiv,verifier_movsx,verifier_ldsx,verifier_gotol,verifier_bswap
  torvalds#316/1   verifier_bswap/BSWAP, 16:OK
  torvalds#316/2   verifier_bswap/BSWAP, 16 @unpriv:OK
  torvalds#316/3   verifier_bswap/BSWAP, 32:OK
  torvalds#316/4   verifier_bswap/BSWAP, 32 @unpriv:OK
  torvalds#316/5   verifier_bswap/BSWAP, 64:OK
  torvalds#316/6   verifier_bswap/BSWAP, 64 @unpriv:OK
  torvalds#316     verifier_bswap:OK
  torvalds#330/1   verifier_gotol/gotol, small_imm:OK
  torvalds#330/2   verifier_gotol/gotol, small_imm @unpriv:OK
  torvalds#330     verifier_gotol:OK
  torvalds#338/1   verifier_ldsx/LDSX, S8:OK
  torvalds#338/2   verifier_ldsx/LDSX, S8 @unpriv:OK
  torvalds#338/3   verifier_ldsx/LDSX, S16:OK
  torvalds#338/4   verifier_ldsx/LDSX, S16 @unpriv:OK
  torvalds#338/5   verifier_ldsx/LDSX, S32:OK
  torvalds#338/6   verifier_ldsx/LDSX, S32 @unpriv:OK
  torvalds#338/7   verifier_ldsx/LDSX, S8 range checking, privileged:OK
  torvalds#338/8   verifier_ldsx/LDSX, S16 range checking:OK
  torvalds#338/9   verifier_ldsx/LDSX, S16 range checking @unpriv:OK
  torvalds#338/10  verifier_ldsx/LDSX, S32 range checking:OK
  torvalds#338/11  verifier_ldsx/LDSX, S32 range checking @unpriv:OK
  torvalds#338     verifier_ldsx:OK
  torvalds#349/1   verifier_movsx/MOV32SX, S8:OK
  torvalds#349/2   verifier_movsx/MOV32SX, S8 @unpriv:OK
  torvalds#349/3   verifier_movsx/MOV32SX, S16:OK
  torvalds#349/4   verifier_movsx/MOV32SX, S16 @unpriv:OK
  torvalds#349/5   verifier_movsx/MOV64SX, S8:OK
  torvalds#349/6   verifier_movsx/MOV64SX, S8 @unpriv:OK
  torvalds#349/7   verifier_movsx/MOV64SX, S16:OK
  torvalds#349/8   verifier_movsx/MOV64SX, S16 @unpriv:OK
  torvalds#349/9   verifier_movsx/MOV64SX, S32:OK
  torvalds#349/10  verifier_movsx/MOV64SX, S32 @unpriv:OK
  torvalds#349/11  verifier_movsx/MOV32SX, S8, range_check:OK
  torvalds#349/12  verifier_movsx/MOV32SX, S8, range_check @unpriv:OK
  torvalds#349/13  verifier_movsx/MOV32SX, S16, range_check:OK
  torvalds#349/14  verifier_movsx/MOV32SX, S16, range_check @unpriv:OK
  torvalds#349/15  verifier_movsx/MOV32SX, S16, range_check 2:OK
  torvalds#349/16  verifier_movsx/MOV32SX, S16, range_check 2 @unpriv:OK
  torvalds#349/17  verifier_movsx/MOV64SX, S8, range_check:OK
  torvalds#349/18  verifier_movsx/MOV64SX, S8, range_check @unpriv:OK
  torvalds#349/19  verifier_movsx/MOV64SX, S16, range_check:OK
  torvalds#349/20  verifier_movsx/MOV64SX, S16, range_check @unpriv:OK
  torvalds#349/21  verifier_movsx/MOV64SX, S32, range_check:OK
  torvalds#349/22  verifier_movsx/MOV64SX, S32, range_check @unpriv:OK
  torvalds#349/23  verifier_movsx/MOV64SX, S16, R10 Sign Extension:OK
  torvalds#349/24  verifier_movsx/MOV64SX, S16, R10 Sign Extension @unpriv:OK
  torvalds#349     verifier_movsx:OK
  torvalds#361/1   verifier_sdiv/SDIV32, non-zero imm divisor, check 1:OK
  torvalds#361/2   verifier_sdiv/SDIV32, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/3   verifier_sdiv/SDIV32, non-zero imm divisor, check 2:OK
  torvalds#361/4   verifier_sdiv/SDIV32, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/5   verifier_sdiv/SDIV32, non-zero imm divisor, check 3:OK
  torvalds#361/6   verifier_sdiv/SDIV32, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/7   verifier_sdiv/SDIV32, non-zero imm divisor, check 4:OK
  torvalds#361/8   verifier_sdiv/SDIV32, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/9   verifier_sdiv/SDIV32, non-zero imm divisor, check 5:OK
  torvalds#361/10  verifier_sdiv/SDIV32, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/11  verifier_sdiv/SDIV32, non-zero imm divisor, check 6:OK
  torvalds#361/12  verifier_sdiv/SDIV32, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/13  verifier_sdiv/SDIV32, non-zero imm divisor, check 7:OK
  torvalds#361/14  verifier_sdiv/SDIV32, non-zero imm divisor, check 7 @unpriv:OK
  torvalds#361/15  verifier_sdiv/SDIV32, non-zero imm divisor, check 8:OK
  torvalds#361/16  verifier_sdiv/SDIV32, non-zero imm divisor, check 8 @unpriv:OK
  torvalds#361/17  verifier_sdiv/SDIV32, non-zero reg divisor, check 1:OK
  torvalds#361/18  verifier_sdiv/SDIV32, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/19  verifier_sdiv/SDIV32, non-zero reg divisor, check 2:OK
  torvalds#361/20  verifier_sdiv/SDIV32, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/21  verifier_sdiv/SDIV32, non-zero reg divisor, check 3:OK
  torvalds#361/22  verifier_sdiv/SDIV32, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/23  verifier_sdiv/SDIV32, non-zero reg divisor, check 4:OK
  torvalds#361/24  verifier_sdiv/SDIV32, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/25  verifier_sdiv/SDIV32, non-zero reg divisor, check 5:OK
  torvalds#361/26  verifier_sdiv/SDIV32, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/27  verifier_sdiv/SDIV32, non-zero reg divisor, check 6:OK
  torvalds#361/28  verifier_sdiv/SDIV32, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/29  verifier_sdiv/SDIV32, non-zero reg divisor, check 7:OK
  torvalds#361/30  verifier_sdiv/SDIV32, non-zero reg divisor, check 7 @unpriv:OK
  torvalds#361/31  verifier_sdiv/SDIV32, non-zero reg divisor, check 8:OK
  torvalds#361/32  verifier_sdiv/SDIV32, non-zero reg divisor, check 8 @unpriv:OK
  torvalds#361/33  verifier_sdiv/SDIV64, non-zero imm divisor, check 1:OK
  torvalds#361/34  verifier_sdiv/SDIV64, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/35  verifier_sdiv/SDIV64, non-zero imm divisor, check 2:OK
  torvalds#361/36  verifier_sdiv/SDIV64, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/37  verifier_sdiv/SDIV64, non-zero imm divisor, check 3:OK
  torvalds#361/38  verifier_sdiv/SDIV64, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/39  verifier_sdiv/SDIV64, non-zero imm divisor, check 4:OK
  torvalds#361/40  verifier_sdiv/SDIV64, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/41  verifier_sdiv/SDIV64, non-zero imm divisor, check 5:OK
  torvalds#361/42  verifier_sdiv/SDIV64, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/43  verifier_sdiv/SDIV64, non-zero imm divisor, check 6:OK
  torvalds#361/44  verifier_sdiv/SDIV64, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/45  verifier_sdiv/SDIV64, non-zero reg divisor, check 1:OK
  torvalds#361/46  verifier_sdiv/SDIV64, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/47  verifier_sdiv/SDIV64, non-zero reg divisor, check 2:OK
  torvalds#361/48  verifier_sdiv/SDIV64, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/49  verifier_sdiv/SDIV64, non-zero reg divisor, check 3:OK
  torvalds#361/50  verifier_sdiv/SDIV64, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/51  verifier_sdiv/SDIV64, non-zero reg divisor, check 4:OK
  torvalds#361/52  verifier_sdiv/SDIV64, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/53  verifier_sdiv/SDIV64, non-zero reg divisor, check 5:OK
  torvalds#361/54  verifier_sdiv/SDIV64, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/55  verifier_sdiv/SDIV64, non-zero reg divisor, check 6:OK
  torvalds#361/56  verifier_sdiv/SDIV64, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/57  verifier_sdiv/SMOD32, non-zero imm divisor, check 1:OK
  torvalds#361/58  verifier_sdiv/SMOD32, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/59  verifier_sdiv/SMOD32, non-zero imm divisor, check 2:OK
  torvalds#361/60  verifier_sdiv/SMOD32, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/61  verifier_sdiv/SMOD32, non-zero imm divisor, check 3:OK
  torvalds#361/62  verifier_sdiv/SMOD32, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/63  verifier_sdiv/SMOD32, non-zero imm divisor, check 4:OK
  torvalds#361/64  verifier_sdiv/SMOD32, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/65  verifier_sdiv/SMOD32, non-zero imm divisor, check 5:OK
  torvalds#361/66  verifier_sdiv/SMOD32, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/67  verifier_sdiv/SMOD32, non-zero imm divisor, check 6:OK
  torvalds#361/68  verifier_sdiv/SMOD32, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/69  verifier_sdiv/SMOD32, non-zero reg divisor, check 1:OK
  torvalds#361/70  verifier_sdiv/SMOD32, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/71  verifier_sdiv/SMOD32, non-zero reg divisor, check 2:OK
  torvalds#361/72  verifier_sdiv/SMOD32, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/73  verifier_sdiv/SMOD32, non-zero reg divisor, check 3:OK
  torvalds#361/74  verifier_sdiv/SMOD32, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/75  verifier_sdiv/SMOD32, non-zero reg divisor, check 4:OK
  torvalds#361/76  verifier_sdiv/SMOD32, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/77  verifier_sdiv/SMOD32, non-zero reg divisor, check 5:OK
  torvalds#361/78  verifier_sdiv/SMOD32, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/79  verifier_sdiv/SMOD32, non-zero reg divisor, check 6:OK
  torvalds#361/80  verifier_sdiv/SMOD32, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/81  verifier_sdiv/SMOD64, non-zero imm divisor, check 1:OK
  torvalds#361/82  verifier_sdiv/SMOD64, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/83  verifier_sdiv/SMOD64, non-zero imm divisor, check 2:OK
  torvalds#361/84  verifier_sdiv/SMOD64, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/85  verifier_sdiv/SMOD64, non-zero imm divisor, check 3:OK
  torvalds#361/86  verifier_sdiv/SMOD64, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/87  verifier_sdiv/SMOD64, non-zero imm divisor, check 4:OK
  torvalds#361/88  verifier_sdiv/SMOD64, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/89  verifier_sdiv/SMOD64, non-zero imm divisor, check 5:OK
  torvalds#361/90  verifier_sdiv/SMOD64, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/91  verifier_sdiv/SMOD64, non-zero imm divisor, check 6:OK
  torvalds#361/92  verifier_sdiv/SMOD64, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/93  verifier_sdiv/SMOD64, non-zero imm divisor, check 7:OK
  torvalds#361/94  verifier_sdiv/SMOD64, non-zero imm divisor, check 7 @unpriv:OK
  torvalds#361/95  verifier_sdiv/SMOD64, non-zero imm divisor, check 8:OK
  torvalds#361/96  verifier_sdiv/SMOD64, non-zero imm divisor, check 8 @unpriv:OK
  torvalds#361/97  verifier_sdiv/SMOD64, non-zero reg divisor, check 1:OK
  torvalds#361/98  verifier_sdiv/SMOD64, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/99  verifier_sdiv/SMOD64, non-zero reg divisor, check 2:OK
  torvalds#361/100 verifier_sdiv/SMOD64, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/101 verifier_sdiv/SMOD64, non-zero reg divisor, check 3:OK
  torvalds#361/102 verifier_sdiv/SMOD64, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/103 verifier_sdiv/SMOD64, non-zero reg divisor, check 4:OK
  torvalds#361/104 verifier_sdiv/SMOD64, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/105 verifier_sdiv/SMOD64, non-zero reg divisor, check 5:OK
  torvalds#361/106 verifier_sdiv/SMOD64, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/107 verifier_sdiv/SMOD64, non-zero reg divisor, check 6:OK
  torvalds#361/108 verifier_sdiv/SMOD64, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/109 verifier_sdiv/SMOD64, non-zero reg divisor, check 7:OK
  torvalds#361/110 verifier_sdiv/SMOD64, non-zero reg divisor, check 7 @unpriv:OK
  torvalds#361/111 verifier_sdiv/SMOD64, non-zero reg divisor, check 8:OK
  torvalds#361/112 verifier_sdiv/SMOD64, non-zero reg divisor, check 8 @unpriv:OK
  torvalds#361/113 verifier_sdiv/SDIV32, zero divisor:OK
  torvalds#361/114 verifier_sdiv/SDIV32, zero divisor @unpriv:OK
  torvalds#361/115 verifier_sdiv/SDIV64, zero divisor:OK
  torvalds#361/116 verifier_sdiv/SDIV64, zero divisor @unpriv:OK
  torvalds#361/117 verifier_sdiv/SMOD32, zero divisor:OK
  torvalds#361/118 verifier_sdiv/SMOD32, zero divisor @unpriv:OK
  torvalds#361/119 verifier_sdiv/SMOD64, zero divisor:OK
  torvalds#361/120 verifier_sdiv/SMOD64, zero divisor @unpriv:OK
  torvalds#361     verifier_sdiv:OK
  Summary: 5/163 PASSED, 0 SKIPPED, 0 FAILED

  # ./test_progs -t ldsx_insn
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__open 0 nsec
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__load 0 nsec
  libbpf: prog 'test_ptr_struct_arg': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'test_ptr_struct_arg': failed to auto-attach: -524
  test_map_val_and_probed_memory:FAIL:test_ldsx_insn__attach unexpected error: -524 (errno 524)
  torvalds#116/1   ldsx_insn/map_val and probed_memory:FAIL
  torvalds#116/2   ldsx_insn/ctx_member_sign_ext:OK
  torvalds#116/3   ldsx_insn/ctx_member_narrow_sign_ext:OK
  torvalds#116     ldsx_insn:FAIL

  All error logs:
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__open 0 nsec
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__load 0 nsec
  libbpf: prog 'test_ptr_struct_arg': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'test_ptr_struct_arg': failed to auto-attach: -524
  test_map_val_and_probed_memory:FAIL:test_ldsx_insn__attach unexpected error: -524 (errno 524)
  torvalds#116/1   ldsx_insn/map_val and probed_memory:FAIL
  torvalds#116     ldsx_insn:FAIL
  Summary: 0/2 PASSED, 0 SKIPPED, 1 FAILED

Signed-off-by: Hengqi Chen <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
borkmann added a commit to cilium/linux that referenced this pull request May 23, 2024
  # ./vmtest.sh -- ./test_progs -t netkit
  [...]
  ./test_progs -t netkit
  [    1.140780] bpf_testmod: loading out-of-tree module taints kernel.
  [    1.141127] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
  [    1.284601] tsc: Refined TSC clocksource calibration: 3408.006 MHz
  [    1.286672] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd9b189d, max_idle_ns: 440795225691 ns
  [    1.290384] clocksource: Switched to clocksource tsc
  torvalds#345     tc_netkit_basic:OK
  torvalds#346     tc_netkit_device:OK
  torvalds#347     tc_netkit_multi_links:OK
  torvalds#348     tc_netkit_multi_opts:OK
  torvalds#349     tc_netkit_neigh_links:OK
  torvalds#350     tc_netkit_pkt_type:OK
  Summary: 6/0 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Daniel Borkmann <[email protected]>
borkmann added a commit to cilium/linux that referenced this pull request May 24, 2024
Add a test case to assert that the skb->pkt_type which was set from the BPF
program is retained from the netkit xmit side to the peer's device at tcx
ingress location.

  # ./vmtest.sh -- ./test_progs -t netkit
  [...]
  ./test_progs -t netkit
  [    1.140780] bpf_testmod: loading out-of-tree module taints kernel.
  [    1.141127] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
  [    1.284601] tsc: Refined TSC clocksource calibration: 3408.006 MHz
  [    1.286672] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd9b189d, max_idle_ns: 440795225691 ns
  [    1.290384] clocksource: Switched to clocksource tsc
  torvalds#345     tc_netkit_basic:OK
  torvalds#346     tc_netkit_device:OK
  torvalds#347     tc_netkit_multi_links:OK
  torvalds#348     tc_netkit_multi_opts:OK
  torvalds#349     tc_netkit_neigh_links:OK
  torvalds#350     tc_netkit_pkt_type:OK
  Summary: 6/0 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Daniel Borkmann <[email protected]>
borkmann added a commit to cilium/linux that referenced this pull request May 24, 2024
Add a test case to assert that the skb->pkt_type which was set from the BPF
program is retained from the netkit xmit side to the peer's device at tcx
ingress location.

  # ./vmtest.sh -- ./test_progs -t netkit
  [...]
  ./test_progs -t netkit
  [    1.140780] bpf_testmod: loading out-of-tree module taints kernel.
  [    1.141127] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
  [    1.284601] tsc: Refined TSC clocksource calibration: 3408.006 MHz
  [    1.286672] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd9b189d, max_idle_ns: 440795225691 ns
  [    1.290384] clocksource: Switched to clocksource tsc
  torvalds#345     tc_netkit_basic:OK
  torvalds#346     tc_netkit_device:OK
  torvalds#347     tc_netkit_multi_links:OK
  torvalds#348     tc_netkit_multi_opts:OK
  torvalds#349     tc_netkit_neigh_links:OK
  torvalds#350     tc_netkit_pkt_type:OK
  Summary: 6/0 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Daniel Borkmann <[email protected]>
intel-lab-lkp pushed a commit to intel-lab-lkp/linux that referenced this pull request May 24, 2024
Add a test case to assert that the skb->pkt_type which was set from the BPF
program is retained from the netkit xmit side to the peer's device at tcx
ingress location.

  # ./vmtest.sh -- ./test_progs -t netkit
  [...]
  ./test_progs -t netkit
  [    1.140780] bpf_testmod: loading out-of-tree module taints kernel.
  [    1.141127] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
  [    1.284601] tsc: Refined TSC clocksource calibration: 3408.006 MHz
  [    1.286672] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd9b189d, max_idle_ns: 440795225691 ns
  [    1.290384] clocksource: Switched to clocksource tsc
  torvalds#345     tc_netkit_basic:OK
  torvalds#346     tc_netkit_device:OK
  torvalds#347     tc_netkit_multi_links:OK
  torvalds#348     tc_netkit_multi_opts:OK
  torvalds#349     tc_netkit_neigh_links:OK
  torvalds#350     tc_netkit_pkt_type:OK
  Summary: 6/0 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Daniel Borkmann <[email protected]>
intel-lab-lkp pushed a commit to intel-lab-lkp/linux that referenced this pull request May 26, 2024
Add a test case to assert that the skb->pkt_type which was set from the BPF
program is retained from the netkit xmit side to the peer's device at tcx
ingress location.

  # ./vmtest.sh -- ./test_progs -t netkit
  [...]
  ./test_progs -t netkit
  [    1.140780] bpf_testmod: loading out-of-tree module taints kernel.
  [    1.141127] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
  [    1.284601] tsc: Refined TSC clocksource calibration: 3408.006 MHz
  [    1.286672] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd9b189d, max_idle_ns: 440795225691 ns
  [    1.290384] clocksource: Switched to clocksource tsc
  torvalds#345     tc_netkit_basic:OK
  torvalds#346     tc_netkit_device:OK
  torvalds#347     tc_netkit_multi_links:OK
  torvalds#348     tc_netkit_multi_opts:OK
  torvalds#349     tc_netkit_neigh_links:OK
  torvalds#350     tc_netkit_pkt_type:OK
  Summary: 6/0 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
adeepn pushed a commit to jethome-iot/linux-kernel that referenced this pull request Jun 10, 2024
Add a test case to assert that the skb->pkt_type which was set from the BPF
program is retained from the netkit xmit side to the peer's device at tcx
ingress location.

  # ./vmtest.sh -- ./test_progs -t netkit
  [...]
  ./test_progs -t netkit
  [    1.140780] bpf_testmod: loading out-of-tree module taints kernel.
  [    1.141127] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
  [    1.284601] tsc: Refined TSC clocksource calibration: 3408.006 MHz
  [    1.286672] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd9b189d, max_idle_ns: 440795225691 ns
  [    1.290384] clocksource: Switched to clocksource tsc
  torvalds#345     tc_netkit_basic:OK
  torvalds#346     tc_netkit_device:OK
  torvalds#347     tc_netkit_multi_links:OK
  torvalds#348     tc_netkit_multi_opts:OK
  torvalds#349     tc_netkit_neigh_links:OK
  torvalds#350     tc_netkit_pkt_type:OK
  Summary: 6/0 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
shipujin pushed a commit to shipujin/linux that referenced this pull request Jul 24, 2024
Enable the cpu v4 tests for LoongArch. Currently, we don't have BPF
trampoline in LoongArch JIT, so the fentry test `test_ptr_struct_arg`
still failed, will followup.

Test result attached below:

  # ./test_progs -t verifier_sdiv,verifier_movsx,verifier_ldsx,verifier_gotol,verifier_bswap
  torvalds#316/1   verifier_bswap/BSWAP, 16:OK
  torvalds#316/2   verifier_bswap/BSWAP, 16 @unpriv:OK
  torvalds#316/3   verifier_bswap/BSWAP, 32:OK
  torvalds#316/4   verifier_bswap/BSWAP, 32 @unpriv:OK
  torvalds#316/5   verifier_bswap/BSWAP, 64:OK
  torvalds#316/6   verifier_bswap/BSWAP, 64 @unpriv:OK
  torvalds#316     verifier_bswap:OK
  torvalds#330/1   verifier_gotol/gotol, small_imm:OK
  torvalds#330/2   verifier_gotol/gotol, small_imm @unpriv:OK
  torvalds#330     verifier_gotol:OK
  torvalds#338/1   verifier_ldsx/LDSX, S8:OK
  torvalds#338/2   verifier_ldsx/LDSX, S8 @unpriv:OK
  torvalds#338/3   verifier_ldsx/LDSX, S16:OK
  torvalds#338/4   verifier_ldsx/LDSX, S16 @unpriv:OK
  torvalds#338/5   verifier_ldsx/LDSX, S32:OK
  torvalds#338/6   verifier_ldsx/LDSX, S32 @unpriv:OK
  torvalds#338/7   verifier_ldsx/LDSX, S8 range checking, privileged:OK
  torvalds#338/8   verifier_ldsx/LDSX, S16 range checking:OK
  torvalds#338/9   verifier_ldsx/LDSX, S16 range checking @unpriv:OK
  torvalds#338/10  verifier_ldsx/LDSX, S32 range checking:OK
  torvalds#338/11  verifier_ldsx/LDSX, S32 range checking @unpriv:OK
  torvalds#338     verifier_ldsx:OK
  torvalds#349/1   verifier_movsx/MOV32SX, S8:OK
  torvalds#349/2   verifier_movsx/MOV32SX, S8 @unpriv:OK
  torvalds#349/3   verifier_movsx/MOV32SX, S16:OK
  torvalds#349/4   verifier_movsx/MOV32SX, S16 @unpriv:OK
  torvalds#349/5   verifier_movsx/MOV64SX, S8:OK
  torvalds#349/6   verifier_movsx/MOV64SX, S8 @unpriv:OK
  torvalds#349/7   verifier_movsx/MOV64SX, S16:OK
  torvalds#349/8   verifier_movsx/MOV64SX, S16 @unpriv:OK
  torvalds#349/9   verifier_movsx/MOV64SX, S32:OK
  torvalds#349/10  verifier_movsx/MOV64SX, S32 @unpriv:OK
  torvalds#349/11  verifier_movsx/MOV32SX, S8, range_check:OK
  torvalds#349/12  verifier_movsx/MOV32SX, S8, range_check @unpriv:OK
  torvalds#349/13  verifier_movsx/MOV32SX, S16, range_check:OK
  torvalds#349/14  verifier_movsx/MOV32SX, S16, range_check @unpriv:OK
  torvalds#349/15  verifier_movsx/MOV32SX, S16, range_check 2:OK
  torvalds#349/16  verifier_movsx/MOV32SX, S16, range_check 2 @unpriv:OK
  torvalds#349/17  verifier_movsx/MOV64SX, S8, range_check:OK
  torvalds#349/18  verifier_movsx/MOV64SX, S8, range_check @unpriv:OK
  torvalds#349/19  verifier_movsx/MOV64SX, S16, range_check:OK
  torvalds#349/20  verifier_movsx/MOV64SX, S16, range_check @unpriv:OK
  torvalds#349/21  verifier_movsx/MOV64SX, S32, range_check:OK
  torvalds#349/22  verifier_movsx/MOV64SX, S32, range_check @unpriv:OK
  torvalds#349/23  verifier_movsx/MOV64SX, S16, R10 Sign Extension:OK
  torvalds#349/24  verifier_movsx/MOV64SX, S16, R10 Sign Extension @unpriv:OK
  torvalds#349     verifier_movsx:OK
  torvalds#361/1   verifier_sdiv/SDIV32, non-zero imm divisor, check 1:OK
  torvalds#361/2   verifier_sdiv/SDIV32, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/3   verifier_sdiv/SDIV32, non-zero imm divisor, check 2:OK
  torvalds#361/4   verifier_sdiv/SDIV32, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/5   verifier_sdiv/SDIV32, non-zero imm divisor, check 3:OK
  torvalds#361/6   verifier_sdiv/SDIV32, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/7   verifier_sdiv/SDIV32, non-zero imm divisor, check 4:OK
  torvalds#361/8   verifier_sdiv/SDIV32, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/9   verifier_sdiv/SDIV32, non-zero imm divisor, check 5:OK
  torvalds#361/10  verifier_sdiv/SDIV32, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/11  verifier_sdiv/SDIV32, non-zero imm divisor, check 6:OK
  torvalds#361/12  verifier_sdiv/SDIV32, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/13  verifier_sdiv/SDIV32, non-zero imm divisor, check 7:OK
  torvalds#361/14  verifier_sdiv/SDIV32, non-zero imm divisor, check 7 @unpriv:OK
  torvalds#361/15  verifier_sdiv/SDIV32, non-zero imm divisor, check 8:OK
  torvalds#361/16  verifier_sdiv/SDIV32, non-zero imm divisor, check 8 @unpriv:OK
  torvalds#361/17  verifier_sdiv/SDIV32, non-zero reg divisor, check 1:OK
  torvalds#361/18  verifier_sdiv/SDIV32, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/19  verifier_sdiv/SDIV32, non-zero reg divisor, check 2:OK
  torvalds#361/20  verifier_sdiv/SDIV32, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/21  verifier_sdiv/SDIV32, non-zero reg divisor, check 3:OK
  torvalds#361/22  verifier_sdiv/SDIV32, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/23  verifier_sdiv/SDIV32, non-zero reg divisor, check 4:OK
  torvalds#361/24  verifier_sdiv/SDIV32, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/25  verifier_sdiv/SDIV32, non-zero reg divisor, check 5:OK
  torvalds#361/26  verifier_sdiv/SDIV32, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/27  verifier_sdiv/SDIV32, non-zero reg divisor, check 6:OK
  torvalds#361/28  verifier_sdiv/SDIV32, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/29  verifier_sdiv/SDIV32, non-zero reg divisor, check 7:OK
  torvalds#361/30  verifier_sdiv/SDIV32, non-zero reg divisor, check 7 @unpriv:OK
  torvalds#361/31  verifier_sdiv/SDIV32, non-zero reg divisor, check 8:OK
  torvalds#361/32  verifier_sdiv/SDIV32, non-zero reg divisor, check 8 @unpriv:OK
  torvalds#361/33  verifier_sdiv/SDIV64, non-zero imm divisor, check 1:OK
  torvalds#361/34  verifier_sdiv/SDIV64, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/35  verifier_sdiv/SDIV64, non-zero imm divisor, check 2:OK
  torvalds#361/36  verifier_sdiv/SDIV64, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/37  verifier_sdiv/SDIV64, non-zero imm divisor, check 3:OK
  torvalds#361/38  verifier_sdiv/SDIV64, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/39  verifier_sdiv/SDIV64, non-zero imm divisor, check 4:OK
  torvalds#361/40  verifier_sdiv/SDIV64, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/41  verifier_sdiv/SDIV64, non-zero imm divisor, check 5:OK
  torvalds#361/42  verifier_sdiv/SDIV64, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/43  verifier_sdiv/SDIV64, non-zero imm divisor, check 6:OK
  torvalds#361/44  verifier_sdiv/SDIV64, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/45  verifier_sdiv/SDIV64, non-zero reg divisor, check 1:OK
  torvalds#361/46  verifier_sdiv/SDIV64, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/47  verifier_sdiv/SDIV64, non-zero reg divisor, check 2:OK
  torvalds#361/48  verifier_sdiv/SDIV64, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/49  verifier_sdiv/SDIV64, non-zero reg divisor, check 3:OK
  torvalds#361/50  verifier_sdiv/SDIV64, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/51  verifier_sdiv/SDIV64, non-zero reg divisor, check 4:OK
  torvalds#361/52  verifier_sdiv/SDIV64, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/53  verifier_sdiv/SDIV64, non-zero reg divisor, check 5:OK
  torvalds#361/54  verifier_sdiv/SDIV64, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/55  verifier_sdiv/SDIV64, non-zero reg divisor, check 6:OK
  torvalds#361/56  verifier_sdiv/SDIV64, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/57  verifier_sdiv/SMOD32, non-zero imm divisor, check 1:OK
  torvalds#361/58  verifier_sdiv/SMOD32, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/59  verifier_sdiv/SMOD32, non-zero imm divisor, check 2:OK
  torvalds#361/60  verifier_sdiv/SMOD32, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/61  verifier_sdiv/SMOD32, non-zero imm divisor, check 3:OK
  torvalds#361/62  verifier_sdiv/SMOD32, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/63  verifier_sdiv/SMOD32, non-zero imm divisor, check 4:OK
  torvalds#361/64  verifier_sdiv/SMOD32, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/65  verifier_sdiv/SMOD32, non-zero imm divisor, check 5:OK
  torvalds#361/66  verifier_sdiv/SMOD32, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/67  verifier_sdiv/SMOD32, non-zero imm divisor, check 6:OK
  torvalds#361/68  verifier_sdiv/SMOD32, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/69  verifier_sdiv/SMOD32, non-zero reg divisor, check 1:OK
  torvalds#361/70  verifier_sdiv/SMOD32, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/71  verifier_sdiv/SMOD32, non-zero reg divisor, check 2:OK
  torvalds#361/72  verifier_sdiv/SMOD32, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/73  verifier_sdiv/SMOD32, non-zero reg divisor, check 3:OK
  torvalds#361/74  verifier_sdiv/SMOD32, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/75  verifier_sdiv/SMOD32, non-zero reg divisor, check 4:OK
  torvalds#361/76  verifier_sdiv/SMOD32, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/77  verifier_sdiv/SMOD32, non-zero reg divisor, check 5:OK
  torvalds#361/78  verifier_sdiv/SMOD32, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/79  verifier_sdiv/SMOD32, non-zero reg divisor, check 6:OK
  torvalds#361/80  verifier_sdiv/SMOD32, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/81  verifier_sdiv/SMOD64, non-zero imm divisor, check 1:OK
  torvalds#361/82  verifier_sdiv/SMOD64, non-zero imm divisor, check 1 @unpriv:OK
  torvalds#361/83  verifier_sdiv/SMOD64, non-zero imm divisor, check 2:OK
  torvalds#361/84  verifier_sdiv/SMOD64, non-zero imm divisor, check 2 @unpriv:OK
  torvalds#361/85  verifier_sdiv/SMOD64, non-zero imm divisor, check 3:OK
  torvalds#361/86  verifier_sdiv/SMOD64, non-zero imm divisor, check 3 @unpriv:OK
  torvalds#361/87  verifier_sdiv/SMOD64, non-zero imm divisor, check 4:OK
  torvalds#361/88  verifier_sdiv/SMOD64, non-zero imm divisor, check 4 @unpriv:OK
  torvalds#361/89  verifier_sdiv/SMOD64, non-zero imm divisor, check 5:OK
  torvalds#361/90  verifier_sdiv/SMOD64, non-zero imm divisor, check 5 @unpriv:OK
  torvalds#361/91  verifier_sdiv/SMOD64, non-zero imm divisor, check 6:OK
  torvalds#361/92  verifier_sdiv/SMOD64, non-zero imm divisor, check 6 @unpriv:OK
  torvalds#361/93  verifier_sdiv/SMOD64, non-zero imm divisor, check 7:OK
  torvalds#361/94  verifier_sdiv/SMOD64, non-zero imm divisor, check 7 @unpriv:OK
  torvalds#361/95  verifier_sdiv/SMOD64, non-zero imm divisor, check 8:OK
  torvalds#361/96  verifier_sdiv/SMOD64, non-zero imm divisor, check 8 @unpriv:OK
  torvalds#361/97  verifier_sdiv/SMOD64, non-zero reg divisor, check 1:OK
  torvalds#361/98  verifier_sdiv/SMOD64, non-zero reg divisor, check 1 @unpriv:OK
  torvalds#361/99  verifier_sdiv/SMOD64, non-zero reg divisor, check 2:OK
  torvalds#361/100 verifier_sdiv/SMOD64, non-zero reg divisor, check 2 @unpriv:OK
  torvalds#361/101 verifier_sdiv/SMOD64, non-zero reg divisor, check 3:OK
  torvalds#361/102 verifier_sdiv/SMOD64, non-zero reg divisor, check 3 @unpriv:OK
  torvalds#361/103 verifier_sdiv/SMOD64, non-zero reg divisor, check 4:OK
  torvalds#361/104 verifier_sdiv/SMOD64, non-zero reg divisor, check 4 @unpriv:OK
  torvalds#361/105 verifier_sdiv/SMOD64, non-zero reg divisor, check 5:OK
  torvalds#361/106 verifier_sdiv/SMOD64, non-zero reg divisor, check 5 @unpriv:OK
  torvalds#361/107 verifier_sdiv/SMOD64, non-zero reg divisor, check 6:OK
  torvalds#361/108 verifier_sdiv/SMOD64, non-zero reg divisor, check 6 @unpriv:OK
  torvalds#361/109 verifier_sdiv/SMOD64, non-zero reg divisor, check 7:OK
  torvalds#361/110 verifier_sdiv/SMOD64, non-zero reg divisor, check 7 @unpriv:OK
  torvalds#361/111 verifier_sdiv/SMOD64, non-zero reg divisor, check 8:OK
  torvalds#361/112 verifier_sdiv/SMOD64, non-zero reg divisor, check 8 @unpriv:OK
  torvalds#361/113 verifier_sdiv/SDIV32, zero divisor:OK
  torvalds#361/114 verifier_sdiv/SDIV32, zero divisor @unpriv:OK
  torvalds#361/115 verifier_sdiv/SDIV64, zero divisor:OK
  torvalds#361/116 verifier_sdiv/SDIV64, zero divisor @unpriv:OK
  torvalds#361/117 verifier_sdiv/SMOD32, zero divisor:OK
  torvalds#361/118 verifier_sdiv/SMOD32, zero divisor @unpriv:OK
  torvalds#361/119 verifier_sdiv/SMOD64, zero divisor:OK
  torvalds#361/120 verifier_sdiv/SMOD64, zero divisor @unpriv:OK
  torvalds#361     verifier_sdiv:OK
  Summary: 5/163 PASSED, 0 SKIPPED, 0 FAILED

  # ./test_progs -t ldsx_insn
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__open 0 nsec
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__load 0 nsec
  libbpf: prog 'test_ptr_struct_arg': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'test_ptr_struct_arg': failed to auto-attach: -524
  test_map_val_and_probed_memory:FAIL:test_ldsx_insn__attach unexpected error: -524 (errno 524)
  torvalds#116/1   ldsx_insn/map_val and probed_memory:FAIL
  torvalds#116/2   ldsx_insn/ctx_member_sign_ext:OK
  torvalds#116/3   ldsx_insn/ctx_member_narrow_sign_ext:OK
  torvalds#116     ldsx_insn:FAIL

  All error logs:
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__open 0 nsec
  test_map_val_and_probed_memory:PASS:test_ldsx_insn__load 0 nsec
  libbpf: prog 'test_ptr_struct_arg': failed to attach: ERROR: strerror_r(-524)=22
  libbpf: prog 'test_ptr_struct_arg': failed to auto-attach: -524
  test_map_val_and_probed_memory:FAIL:test_ldsx_insn__attach unexpected error: -524 (errno 524)
  torvalds#116/1   ldsx_insn/map_val and probed_memory:FAIL
  torvalds#116     ldsx_insn:FAIL
  Summary: 0/2 PASSED, 0 SKIPPED, 1 FAILED

Signed-off-by: Hengqi Chen <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

Successfully merging this pull request may close these issues.

1 participant