Aosp optee 4.9 #538

jsaxer · 2018-03-28T01:40:36Z

No description provided.

[ Upstream commit 03e4def ] Just like commit 4acd494 ("ipv6: addrconf: Avoid calling netdevice notifiers with RCU read-side lock"), it is unnecessary to make addrconf_disable_change() use RCU iteration over the netdev list, since it already holds the RTNL lock, or we may meet Illegal context switch in RCU read-side critical section. Signed-off-by: Kefeng Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 0dbd7ff ] Found that if we run LTP netstress test with large MSS (65K), the first attempt from server to send data comparable to this MSS on fastopen connection will be delayed by the probe timer. Here is an example: < S seq 0:0 win 43690 options [mss 65495 wscale 7 tfo cookie] length 32 > S. seq 0:0 ack 1 win 43690 options [mss 65495 wscale 7] length 0 < . ack 1 win 342 length 0 Inside tcp_sendmsg(), tcp_send_mss() returns max MSS in 'mss_now', as well as in 'size_goal'. This results the segment not queued for transmition until all the data copied from user buffer. Then, inside __tcp_push_pending_frames(), it breaks on send window test and continues with the check probe timer. Fragmentation occurs in tcp_write_wakeup()... +0.2 > P. seq 1:43777 ack 1 win 342 length 43776 < . ack 43777, win 1365 length 0 > P. seq 43777:65001 ack 1 win 342 options [...] length 21224 ... This also contradicts with the fact that we should bound to the half of the window if it is large. Fix this flaw by correctly initializing max_window. Before that, it could have large values that affect further calculations of 'size_goal'. Fixes: 168a8f5 ("tcp: TCP Fast Open Server - main code path") Signed-off-by: Alexey Kodanev <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit e048fc5 ] A driver using dev_alloc_page() must not reuse a page allocated from emergency memory reserve. Otherwise all packets using this page will be immediately dropped, unless for very specific sockets having SOCK_MEMALLOC bit set. This issue might be hard to debug, because only a fraction of received packets would be dropped. Fixes: 4415a03 ("net/mlx5e: Implement RX mapped page cache for page recycle") Signed-off-by: Eric Dumazet <[email protected]> Cc: Tariq Toukan <[email protected]> Cc: Saeed Mahameed <[email protected]> Acked-by: Saeed Mahameed <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit b667744 ] Any bridge options specified during link creation (e.g. ip link add) are ignored as br_dev_newlink() does not process them. Use br_changelink() to do it. Fixes: 1332351 ("bridge: implement rtnl_link_ops->changelink") Signed-off-by: Ivan Vecera <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 9f427a0 ] MPLS multipath for LSR is broken -- always selecting the first nexthop in the one label case. For example: $ ip -f mpls ro ls 100 nexthop as to 200 via inet 172.16.2.2 dev virt12 nexthop as to 300 via inet 172.16.3.2 dev virt13 101 nexthop as to 201 via inet6 2000:2::2 dev virt12 nexthop as to 301 via inet6 2000:3::2 dev virt13 In this example incoming packets have a single MPLS labels which means BOS bit is set. The BOS bit is passed from mpls_forward down to mpls_multipath_hash which never processes the hash loop because BOS is 1. Update mpls_multipath_hash to process the entire label stack. mpls_hdr_len tracks the total mpls header length on each pass (on pass N mpls_hdr_len is N * sizeof(mpls_shim_hdr)). When the label is found with the BOS set it verifies the skb has sufficient header for ipv4 or ipv6, and find the IPv4 and IPv6 header by using the last mpls_hdr pointer and adding 1 to advance past it. With these changes I have verified the code correctly sees the label, BOS, IPv4 and IPv6 addresses in the network header and icmp/tcp/udp traffic for ipv4 and ipv6 are distributed across the nexthops. Fixes: 1c78efa ("mpls: flow-based multipath selection") Acked-by: Robert Shearman <[email protected]> Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 6a0b76c ] Runtime suspend shouldn't be executed if the tx queue is not empty, because the device is not idle. Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 0fb4455 ] Dmitry reported a deadlock scenario: unix_bind() path: u->bindlock ==> sb_writer do_splice() path: sb_writer ==> pipe->mutex ==> u->bindlock In the unix_bind() code path, unix_mknod() does not have to be done with u->bindlock held, since it is a pure fs operation, so we can just move unix_mknod() out. Reported-by: Dmitry Vyukov <[email protected]> Tested-by: Dmitry Vyukov <[email protected]> Cc: Rainer Weikusat <[email protected]> Cc: Al Viro <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 5b9f575 ] Another rebranded Novatel E371. qmi_wwan should drive this device, while cdc_ether should ignore it. Even though the USB descriptors are plain CDC-ETHER that USB interface is a QMI interface. Ref commit 7fdb784 ("qmi_wwan/cdc_ether: add device IDs for Dell 5804 (Novatel E371) WWAN card") Cc: Dan Williams <[email protected]> Signed-off-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 88ff733 ] Modules implementing lwtunnel ops should not be allowed to unload while there is state alive using those ops, so specify the owning module for all lwtunnel ops. Signed-off-by: Robert Shearman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 85c8140 ] When attempting to free lwtunnel state after the module for the encap has been unloaded an oops occurs: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: lwtstate_free+0x18/0x40 [..] task: ffff88003e372380 task.stack: ffffc900001fc000 RIP: 0010:lwtstate_free+0x18/0x40 RSP: 0018:ffff88003fd83e88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88002bbb3380 RCX: ffff88000c91a300 [..] Call Trace: <IRQ> free_fib_info_rcu+0x195/0x1a0 ? rt_fibinfo_free+0x50/0x50 rcu_process_callbacks+0x2d3/0x850 ? rcu_process_callbacks+0x296/0x850 __do_softirq+0xe4/0x4cb irq_exit+0xb0/0xc0 smp_apic_timer_interrupt+0x3d/0x50 apic_timer_interrupt+0x93/0xa0 [..] Code: e8 6e c6 fc ff 89 d8 5b 5d c3 bb de ff ff ff eb f4 66 90 66 66 66 66 90 55 48 89 e5 53 0f b7 07 48 89 fb 48 8b 04 c5 00 81 d5 81 <48> 8b 40 08 48 85 c0 74 13 ff d0 48 8d 7b 20 be 20 00 00 00 e8 The problem is after the module for the encap can be unloaded the corresponding ops is removed and is thus NULL here. Modules implementing lwtunnel ops should not be allowed to unload while there is state alive using those ops, so grab the module reference for the ops on creating lwtunnel state and of course release the reference when freeing the state. Fixes: 1104d9b ("lwtunnel: Add destroy state operation") Signed-off-by: Robert Shearman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit f154be2 ] Commit 448b448 ("net: dsa: Add lockdep class to tx queues to avoid lockdep splat") removed the netif_device_detach() call done in dsa_slave_suspend() which is necessary, and paired with a corresponding netif_device_attach(), bring it back. Fixes: 448b448 ("net: dsa: Add lockdep class to tx queues to avoid lockdep splat") Signed-off-by: Florian Fainelli <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 5149fd3 upstream. Setting aside 4 blocks globally for bmbt splits isn't all that useful, as different threads can allocate space in parallel. Bump it to 4 blocks per AG to allow each thread that is currently doing an allocation to dip into it separately. Without that we may no have enough reserved blocks if there are enough parallel transactions in an almost out space file system that all run into bmap btree splits. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Brian Foster <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 255c516 upstream. We can't just set minleft to 0 when we're low on space - that's exactly what we need minleft for: to protect space in the AG for btree block allocations when we are low on free space. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Brian Foster <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 54fee13 upstream. We must decide in xfs_alloc_fix_freelist if we can perform an allocation from a given AG is possible or not based on the available space, and should not fail the allocation past that point on a healthy file system. But currently we have two additional places that second-guess xfs_alloc_fix_freelist: xfs_alloc_ag_vextent tries to adjust the maxlen parameter to remove the reservation before doing the allocation (but ignores the various minium freespace requirements), and xfs_alloc_fix_minleft tries to fix up the allocated length after we've found an extent, but ignores the reservations and also doesn't take the AGFL into account (and thus fails allocations for not matching minlen in some cases). Remove all these later fixups and just correct the maxlen argument inside xfs_alloc_fix_freelist once we have the AGF buffer locked. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Brian Foster <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 12ef830 upstream. ->total is a bit of an odd parameter passed down to the low-level allocator all the way from the high-level callers. It's supposed to contain the maximum number of blocks to be allocated for the whole transaction [1]. But in xfs_iomap_write_allocate we only convert existing delayed allocations and thus only have a minimal block reservation for the current transaction, so xfs_alloc_space_available can't use it for the allocation decisions. Use the maximum of args->total and the calculated block requirement to make a decision. We probably should get rid of args->total eventually and instead apply ->minleft more broadly, but that will require some extensive changes all over. [1] which creates lots of confusion as most callers don't decrement it once doing a first allocation. But that's for a separate series. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Brian Foster <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 84a4620 upstream. There are only two reasons for xfs_log_force / xfs_log_force_lsn to fail: one is an I/O error, for which xlog_bdstrat already logs a warning, and the second is an already shutdown log due to a previous I/O errors. In the latter case we'll already have a previous indication for the actual error, but the large stream of misleading warnings from xfs_log_force will probably scroll it out of the message buffer. Simply removing the warnings thus makes the XFS log reporting significantly better. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Carlos Maiolino <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit bf46ecc upstream. The ASSERT() condition is the normal case, not the exception, so testing the condition should be likely(), not unlikely(). Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Amir Goldstein <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 3c6f46e upstream. This changes fixes an assertion hit when fuzzing on-disk i_mode values. The easy case to fix is when changing an empty file i_mode to S_IFDIR. In this case, xfs_dinode_verify() detects an illegal zero size for directory and fails to load the inode structure from disk. For the case of non empty file whose i_mode is changed to S_IFDIR, the ASSERT() statement in xfs_dir2_isblock() is replaced with return -EFSCORRUPTED, to avoid interacting with corrupted jusk also when XFS_DEBUG is disabled. Suggested-by: Darrick J. Wong <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Amir Goldstein <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit b597dd5 upstream. xfs_dir2.h dereferences some data types in inline functions and fails to include those type definitions, e.g.: xfs_dir2_data_aoff_t, struct xfs_da_geometry. Signed-off-by: Amir Goldstein <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 1fc4d33. The size of the xfs_mode_to_ftype[] conversion table was too small to handle an invalid value of mode=S_IFMT. Instead of fixing the table size, replace the conversion table with a conversion helper that uses a switch statement. Suggested-by: Christoph Hellwig <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Amir Goldstein <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit fab8eef upstream. The helper xfs_dentry_to_name() is used by 2 different classes of callers: Callers that pass zero mode and don't care about the returned name.type field and Callers that pass non zero mode and do care about the name.type field. Change xfs_dentry_to_name() to not take the mode argument and change the call sites of the first class to not pass the mode argument. Create a new helper xfs_dentry_mode_to_name() which does pass the mode argument and returns -EFSCORRUPTED if mode is invalid. Callers that translate non zero mode to on-disk file type now check the return value and will export the error to user instead of staging an invalid file type to be written to directory entry. Signed-off-by: Amir Goldstein <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit a324cbf upstream. Check for invalid file type in xfs_dinode_verify() and fail to load the inode structure from disk. Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Amir Goldstein <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 657bdfb upstream. The GETNEXTQOTA ioctl takes whatever ID is sent in, and looks for the next active quota for an user equal or higher to that ID. But if we are at the maximum ID and then ask for the "next" one, we may wrap back to zero. In this case, userspace may loop forever, because it will start querying again at zero. We'll fix this in userspace as well, but for the kernel, return -ENOENT if we ask for the next quota ID past UINT_MAX so the caller knows to stop. Signed-off-by: Eric Sandeen <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit fd29f7a upstream. A harmless warning just got introduced: fs/xfs/libxfs/xfs_dir2.h:40:8: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers] Removing the 'const' modifier avoids the warning and has no other effect. Fixes: 1fc4d33 ("xfs: replace xfs_mode_to_ftype table with switch statement") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit d2b3964 upstream. Due to the way how xfs_iomap_write_allocate tries to convert the whole found extents from delalloc to real space we can run into a race condition with multiple threads doing writes to this same extent. For the non-COW case that is harmless as the only thing that can happen is that we call xfs_bmapi_write on an extent that has already been converted to a real allocation. For COW writes where we move the extent from the COW to the data fork after I/O completion the race is, however, not quite as harmless. In the worst case we are now calling xfs_bmapi_write on a region that contains hole in the COW work, which will trip up an assert in debug builds or lead to file system corruption in non-debug builds. This seems to be reproducible with workloads of small O_DSYNC write, although so far I've not managed to come up with a with an isolated reproducer. The fix for the issue is relatively simple: tell xfs_bmapi_write that we are only asked to convert delayed allocations and skip holes in that case. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Brian Foster <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 83d230e upstream. sb_dirblklog is added to sb_blocklog to compute the directory block size in bytes. Therefore, we must compare the sum of both those values against XFS_MAX_BLOCKSIZE_LOG, not just dirblklog. Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Eric Sandeen <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 5a93790 upstream. xfs_attr_[get|remove]() have unlocked attribute fork checks to optimize away a lock cycle in cases where the fork does not exist or is otherwise empty. This check is not safe, however, because an attribute fork short form to extent format conversion includes a transient state that causes the xfs_inode_hasattr() check to fail. Specifically, xfs_attr_shortform_to_leaf() creates an empty extent format attribute fork and then adds the existing shortform attributes to it. This means that lookup of an existing xattr can spuriously return -ENOATTR when racing against a setxattr that causes the associated format conversion. This was originally reproduced by an untar on a particularly configured glusterfs volume, but can also be reproduced on demand with properly crafted xattr requests. The format conversion occurs under the exclusive ilock. xfs_attr_get() and xfs_attr_remove() already have the proper locking and checks further down in the functions to handle this situation correctly. Drop the unlocked checks to avoid the spurious failure and rely on the existing logic. Signed-off-by: Brian Foster <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 493611e upstream. With COW files they are the hotpath, just like for files with the extent size hint attribute. We really shouldn't micro-manage anything but failure cases with unlikely. Additionally Arnd Bergmann recently reported that one of these two unlikely annotations causes link failures together with an upcoming kernel instrumentation patch, so let's get rid of it ASAP. Signed-off-by: Christoph Hellwig <[email protected]> Reported-by: Arnd Bergmann <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 2aa6ba7 upstream. If we try to allocate memory pages to back an xfs_buf that we're trying to read, it's possible that we'll be so short on memory that the page allocation fails. For a blocking read we'll just wait, but for readahead we simply dump all the pages we've collected so far. Unfortunately, after dumping the pages we neglect to clear the _XBF_PAGES state, which means that the subsequent call to xfs_buf_free thinks that b_pages still points to pages we own. It then double-frees the b_pages pages. This results in screaming about negative page refcounts from the memory manager, which xfs oughtn't be triggering. To reproduce this case, mount a filesystem where the size of the inodes far outweighs the availalble memory (a ~500M inode filesystem on a VM with 300MB memory did the trick here) and run bulkstat in parallel with other memory eating processes to put a huge load on the system. The "check summary" phase of xfs_scrub also works for this purpose. Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Eric Sandeen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit c364b6d upstream. In a bmapx call, bmv_count is the total size of the array, including the zeroth element that userspace uses to supply the search key. The output array starts at offset 1 so that we can set up the user for the next invocation. Since we now can split an extent into multiple bmap records due to shared/unshared status, we have to be careful that we don't overflow the output array. In the original patch f86f403 ("xfs: teach get_bmapx about shared extents and the CoW fork") I used cur_ext (the output index) to check for overflows, albeit with an off-by-one error. Since nexleft no longer describes the number of unfilled slots in the output, we can rip all that out and use cur_ext for the overflow check directly. Failure to do this causes heap corruption in bmapx callers such as xfs_io and xfs_scrub. xfs/328 can reproduce this problem. Reviewed-by: Eric Sandeen <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

I was doing some experiments with I2C and noticed that Tegra APB DMA driver crashes sometime after I2C DMA transfer termination. The crash happens because tegra_dma_terminate_all() bails out immediately if pending list is empty, thus it doesn't stop hardware and doesn't release the half-completed descriptors which are getting re-used before ISR tasklet kicks-in. tegra-i2c 7000c400.i2c: DMA transfer timeout elants_i2c 0-0010: elants_i2c_irq: failed to read data: -110 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 142 at lib/list_debug.c:45 __list_del_entry_valid+0x45/0xac list_del corruption, ddbaac44->next is LIST_POISON1 (00000100) Modules linked in: CPU: 0 PID: 142 Comm: kworker/0:2 Not tainted 5.5.0-rc2-next-20191220-00175-gc3605715758d-dirty torvalds#538 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events_freezable_power_ thermal_zone_device_check [<c010e5c5>] (unwind_backtrace) from [<c010a1c5>] (show_stack+0x11/0x14) [<c010a1c5>] (show_stack) from [<c0973925>] (dump_stack+0x85/0x94) [<c0973925>] (dump_stack) from [<c011f529>] (__warn+0xc1/0xc4) [<c011f529>] (__warn) from [<c011f7e9>] (warn_slowpath_fmt+0x61/0x78) [<c011f7e9>] (warn_slowpath_fmt) from [<c042497d>] (__list_del_entry_valid+0x45/0xac) [<c042497d>] (__list_del_entry_valid) from [<c047a87f>] (tegra_dma_tasklet+0x5b/0x154) [<c047a87f>] (tegra_dma_tasklet) from [<c0124799>] (tasklet_action_common.constprop.0+0x41/0x7c) [<c0124799>] (tasklet_action_common.constprop.0) from [<c01022ab>] (__do_softirq+0xd3/0x2a8) [<c01022ab>] (__do_softirq) from [<c0124683>] (irq_exit+0x7b/0x98) [<c0124683>] (irq_exit) from [<c0168c19>] (__handle_domain_irq+0x45/0x80) [<c0168c19>] (__handle_domain_irq) from [<c043e429>] (gic_handle_irq+0x45/0x7c) [<c043e429>] (gic_handle_irq) from [<c0101aa5>] (__irq_svc+0x65/0x94) Exception stack(0xde2ebb90 to 0xde2ebbd8) Cc: <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]>

I was doing some experiments with I2C and noticed that Tegra APB DMA driver crashes sometime after I2C DMA transfer termination. The crash happens because tegra_dma_terminate_all() bails out immediately if pending list is empty, thus it doesn't release the half-completed descriptors which are getting re-used before ISR tasklet kicks-in. tegra-i2c 7000c400.i2c: DMA transfer timeout elants_i2c 0-0010: elants_i2c_irq: failed to read data: -110 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 142 at lib/list_debug.c:45 __list_del_entry_valid+0x45/0xac list_del corruption, ddbaac44->next is LIST_POISON1 (00000100) Modules linked in: CPU: 0 PID: 142 Comm: kworker/0:2 Not tainted 5.5.0-rc2-next-20191220-00175-gc3605715758d-dirty torvalds#538 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events_freezable_power_ thermal_zone_device_check [<c010e5c5>] (unwind_backtrace) from [<c010a1c5>] (show_stack+0x11/0x14) [<c010a1c5>] (show_stack) from [<c0973925>] (dump_stack+0x85/0x94) [<c0973925>] (dump_stack) from [<c011f529>] (__warn+0xc1/0xc4) [<c011f529>] (__warn) from [<c011f7e9>] (warn_slowpath_fmt+0x61/0x78) [<c011f7e9>] (warn_slowpath_fmt) from [<c042497d>] (__list_del_entry_valid+0x45/0xac) [<c042497d>] (__list_del_entry_valid) from [<c047a87f>] (tegra_dma_tasklet+0x5b/0x154) [<c047a87f>] (tegra_dma_tasklet) from [<c0124799>] (tasklet_action_common.constprop.0+0x41/0x7c) [<c0124799>] (tasklet_action_common.constprop.0) from [<c01022ab>] (__do_softirq+0xd3/0x2a8) [<c01022ab>] (__do_softirq) from [<c0124683>] (irq_exit+0x7b/0x98) [<c0124683>] (irq_exit) from [<c0168c19>] (__handle_domain_irq+0x45/0x80) [<c0168c19>] (__handle_domain_irq) from [<c043e429>] (gic_handle_irq+0x45/0x7c) [<c043e429>] (gic_handle_irq) from [<c0101aa5>] (__irq_svc+0x65/0x94) Exception stack(0xde2ebb90 to 0xde2ebbd8) Cc: <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]>

I was doing some experiments with I2C and noticed that Tegra APB DMA driver crashes sometime after I2C DMA transfer termination. The crash happens because tegra_dma_terminate_all() bails out immediately if pending list is empty, and thus, it doesn't release the half-completed descriptors which are getting re-used before ISR tasklet kicks-in. tegra-i2c 7000c400.i2c: DMA transfer timeout elants_i2c 0-0010: elants_i2c_irq: failed to read data: -110 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 142 at lib/list_debug.c:45 __list_del_entry_valid+0x45/0xac list_del corruption, ddbaac44->next is LIST_POISON1 (00000100) Modules linked in: CPU: 0 PID: 142 Comm: kworker/0:2 Not tainted 5.5.0-rc2-next-20191220-00175-gc3605715758d-dirty torvalds#538 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events_freezable_power_ thermal_zone_device_check [<c010e5c5>] (unwind_backtrace) from [<c010a1c5>] (show_stack+0x11/0x14) [<c010a1c5>] (show_stack) from [<c0973925>] (dump_stack+0x85/0x94) [<c0973925>] (dump_stack) from [<c011f529>] (__warn+0xc1/0xc4) [<c011f529>] (__warn) from [<c011f7e9>] (warn_slowpath_fmt+0x61/0x78) [<c011f7e9>] (warn_slowpath_fmt) from [<c042497d>] (__list_del_entry_valid+0x45/0xac) [<c042497d>] (__list_del_entry_valid) from [<c047a87f>] (tegra_dma_tasklet+0x5b/0x154) [<c047a87f>] (tegra_dma_tasklet) from [<c0124799>] (tasklet_action_common.constprop.0+0x41/0x7c) [<c0124799>] (tasklet_action_common.constprop.0) from [<c01022ab>] (__do_softirq+0xd3/0x2a8) [<c01022ab>] (__do_softirq) from [<c0124683>] (irq_exit+0x7b/0x98) [<c0124683>] (irq_exit) from [<c0168c19>] (__handle_domain_irq+0x45/0x80) [<c0168c19>] (__handle_domain_irq) from [<c043e429>] (gic_handle_irq+0x45/0x7c) [<c043e429>] (gic_handle_irq) from [<c0101aa5>] (__irq_svc+0x65/0x94) Exception stack(0xde2ebb90 to 0xde2ebbd8) Cc: <[email protected]> Acked-by: Jon Hunter <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]>

I was doing some experiments with I2C and noticed that Tegra APB DMA driver crashes sometime after I2C DMA transfer termination. The crash happens because tegra_dma_terminate_all() bails out immediately if pending list is empty, and thus, it doesn't release the half-completed descriptors which are getting re-used before ISR tasklet kicks-in. tegra-i2c 7000c400.i2c: DMA transfer timeout elants_i2c 0-0010: elants_i2c_irq: failed to read data: -110 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 142 at lib/list_debug.c:45 __list_del_entry_valid+0x45/0xac list_del corruption, ddbaac44->next is LIST_POISON1 (00000100) Modules linked in: CPU: 0 PID: 142 Comm: kworker/0:2 Not tainted 5.5.0-rc2-next-20191220-00175-gc3605715758d-dirty torvalds#538 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events_freezable_power_ thermal_zone_device_check [<c010e5c5>] (unwind_backtrace) from [<c010a1c5>] (show_stack+0x11/0x14) [<c010a1c5>] (show_stack) from [<c0973925>] (dump_stack+0x85/0x94) [<c0973925>] (dump_stack) from [<c011f529>] (__warn+0xc1/0xc4) [<c011f529>] (__warn) from [<c011f7e9>] (warn_slowpath_fmt+0x61/0x78) [<c011f7e9>] (warn_slowpath_fmt) from [<c042497d>] (__list_del_entry_valid+0x45/0xac) [<c042497d>] (__list_del_entry_valid) from [<c047a87f>] (tegra_dma_tasklet+0x5b/0x154) [<c047a87f>] (tegra_dma_tasklet) from [<c0124799>] (tasklet_action_common.constprop.0+0x41/0x7c) [<c0124799>] (tasklet_action_common.constprop.0) from [<c01022ab>] (__do_softirq+0xd3/0x2a8) [<c01022ab>] (__do_softirq) from [<c0124683>] (irq_exit+0x7b/0x98) [<c0124683>] (irq_exit) from [<c0168c19>] (__handle_domain_irq+0x45/0x80) [<c0168c19>] (__handle_domain_irq) from [<c043e429>] (gic_handle_irq+0x45/0x7c) [<c043e429>] (gic_handle_irq) from [<c0101aa5>] (__irq_svc+0x65/0x94) Exception stack(0xde2ebb90 to 0xde2ebbd8) Signed-off-by: Dmitry Osipenko <[email protected]> Acked-by: Jon Hunter <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>

commit 94788af upstream. I was doing some experiments with I2C and noticed that Tegra APB DMA driver crashes sometime after I2C DMA transfer termination. The crash happens because tegra_dma_terminate_all() bails out immediately if pending list is empty, and thus, it doesn't release the half-completed descriptors which are getting re-used before ISR tasklet kicks-in. tegra-i2c 7000c400.i2c: DMA transfer timeout elants_i2c 0-0010: elants_i2c_irq: failed to read data: -110 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 142 at lib/list_debug.c:45 __list_del_entry_valid+0x45/0xac list_del corruption, ddbaac44->next is LIST_POISON1 (00000100) Modules linked in: CPU: 0 PID: 142 Comm: kworker/0:2 Not tainted 5.5.0-rc2-next-20191220-00175-gc3605715758d-dirty torvalds#538 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events_freezable_power_ thermal_zone_device_check [<c010e5c5>] (unwind_backtrace) from [<c010a1c5>] (show_stack+0x11/0x14) [<c010a1c5>] (show_stack) from [<c0973925>] (dump_stack+0x85/0x94) [<c0973925>] (dump_stack) from [<c011f529>] (__warn+0xc1/0xc4) [<c011f529>] (__warn) from [<c011f7e9>] (warn_slowpath_fmt+0x61/0x78) [<c011f7e9>] (warn_slowpath_fmt) from [<c042497d>] (__list_del_entry_valid+0x45/0xac) [<c042497d>] (__list_del_entry_valid) from [<c047a87f>] (tegra_dma_tasklet+0x5b/0x154) [<c047a87f>] (tegra_dma_tasklet) from [<c0124799>] (tasklet_action_common.constprop.0+0x41/0x7c) [<c0124799>] (tasklet_action_common.constprop.0) from [<c01022ab>] (__do_softirq+0xd3/0x2a8) [<c01022ab>] (__do_softirq) from [<c0124683>] (irq_exit+0x7b/0x98) [<c0124683>] (irq_exit) from [<c0168c19>] (__handle_domain_irq+0x45/0x80) [<c0168c19>] (__handle_domain_irq) from [<c043e429>] (gic_handle_irq+0x45/0x7c) [<c043e429>] (gic_handle_irq) from [<c0101aa5>] (__irq_svc+0x65/0x94) Exception stack(0xde2ebb90 to 0xde2ebbd8) Signed-off-by: Dmitry Osipenko <[email protected]> Acked-by: Jon Hunter <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 94788af upstream. I was doing some experiments with I2C and noticed that Tegra APB DMA driver crashes sometime after I2C DMA transfer termination. The crash happens because tegra_dma_terminate_all() bails out immediately if pending list is empty, and thus, it doesn't release the half-completed descriptors which are getting re-used before ISR tasklet kicks-in. tegra-i2c 7000c400.i2c: DMA transfer timeout elants_i2c 0-0010: elants_i2c_irq: failed to read data: -110 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 142 at lib/list_debug.c:45 __list_del_entry_valid+0x45/0xac list_del corruption, ddbaac44->next is LIST_POISON1 (00000100) Modules linked in: CPU: 0 PID: 142 Comm: kworker/0:2 Not tainted 5.5.0-rc2-next-20191220-00175-gc3605715758d-dirty torvalds#538 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events_freezable_power_ thermal_zone_device_check [<c010e5c5>] (unwind_backtrace) from [<c010a1c5>] (show_stack+0x11/0x14) [<c010a1c5>] (show_stack) from [<c0973925>] (dump_stack+0x85/0x94) [<c0973925>] (dump_stack) from [<c011f529>] (__warn+0xc1/0xc4) [<c011f529>] (__warn) from [<c011f7e9>] (warn_slowpath_fmt+0x61/0x78) [<c011f7e9>] (warn_slowpath_fmt) from [<c042497d>] (__list_del_entry_valid+0x45/0xac) [<c042497d>] (__list_del_entry_valid) from [<c047a87f>] (tegra_dma_tasklet+0x5b/0x154) [<c047a87f>] (tegra_dma_tasklet) from [<c0124799>] (tasklet_action_common.constprop.0+0x41/0x7c) [<c0124799>] (tasklet_action_common.constprop.0) from [<c01022ab>] (__do_softirq+0xd3/0x2a8) [<c01022ab>] (__do_softirq) from [<c0124683>] (irq_exit+0x7b/0x98) [<c0124683>] (irq_exit) from [<c0168c19>] (__handle_domain_irq+0x45/0x80) [<c0168c19>] (__handle_domain_irq) from [<c043e429>] (gic_handle_irq+0x45/0x7c) [<c043e429>] (gic_handle_irq) from [<c0101aa5>] (__irq_svc+0x65/0x94) Exception stack(0xde2ebb90 to 0xde2ebbd8) Signed-off-by: Dmitry Osipenko <[email protected]> Acked-by: Jon Hunter <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Lee Jones <[email protected]> Change-Id: Icb0247aef613787d9be31887e7b6030943092c70

BugLink: https://bugs.launchpad.net/bugs/1869433 commit 94788af upstream. I was doing some experiments with I2C and noticed that Tegra APB DMA driver crashes sometime after I2C DMA transfer termination. The crash happens because tegra_dma_terminate_all() bails out immediately if pending list is empty, and thus, it doesn't release the half-completed descriptors which are getting re-used before ISR tasklet kicks-in. tegra-i2c 7000c400.i2c: DMA transfer timeout elants_i2c 0-0010: elants_i2c_irq: failed to read data: -110 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 142 at lib/list_debug.c:45 __list_del_entry_valid+0x45/0xac list_del corruption, ddbaac44->next is LIST_POISON1 (00000100) Modules linked in: CPU: 0 PID: 142 Comm: kworker/0:2 Not tainted 5.5.0-rc2-next-20191220-00175-gc3605715758d-dirty torvalds#538 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events_freezable_power_ thermal_zone_device_check [<c010e5c5>] (unwind_backtrace) from [<c010a1c5>] (show_stack+0x11/0x14) [<c010a1c5>] (show_stack) from [<c0973925>] (dump_stack+0x85/0x94) [<c0973925>] (dump_stack) from [<c011f529>] (__warn+0xc1/0xc4) [<c011f529>] (__warn) from [<c011f7e9>] (warn_slowpath_fmt+0x61/0x78) [<c011f7e9>] (warn_slowpath_fmt) from [<c042497d>] (__list_del_entry_valid+0x45/0xac) [<c042497d>] (__list_del_entry_valid) from [<c047a87f>] (tegra_dma_tasklet+0x5b/0x154) [<c047a87f>] (tegra_dma_tasklet) from [<c0124799>] (tasklet_action_common.constprop.0+0x41/0x7c) [<c0124799>] (tasklet_action_common.constprop.0) from [<c01022ab>] (__do_softirq+0xd3/0x2a8) [<c01022ab>] (__do_softirq) from [<c0124683>] (irq_exit+0x7b/0x98) [<c0124683>] (irq_exit) from [<c0168c19>] (__handle_domain_irq+0x45/0x80) [<c0168c19>] (__handle_domain_irq) from [<c043e429>] (gic_handle_irq+0x45/0x7c) [<c043e429>] (gic_handle_irq) from [<c0101aa5>] (__irq_svc+0x65/0x94) Exception stack(0xde2ebb90 to 0xde2ebbd8) Signed-off-by: Dmitry Osipenko <[email protected]> Acked-by: Jon Hunter <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Khalid Elmously <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1867178 commit 94788af upstream. I was doing some experiments with I2C and noticed that Tegra APB DMA driver crashes sometime after I2C DMA transfer termination. The crash happens because tegra_dma_terminate_all() bails out immediately if pending list is empty, and thus, it doesn't release the half-completed descriptors which are getting re-used before ISR tasklet kicks-in. tegra-i2c 7000c400.i2c: DMA transfer timeout elants_i2c 0-0010: elants_i2c_irq: failed to read data: -110 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 142 at lib/list_debug.c:45 __list_del_entry_valid+0x45/0xac list_del corruption, ddbaac44->next is LIST_POISON1 (00000100) Modules linked in: CPU: 0 PID: 142 Comm: kworker/0:2 Not tainted 5.5.0-rc2-next-20191220-00175-gc3605715758d-dirty torvalds#538 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events_freezable_power_ thermal_zone_device_check [<c010e5c5>] (unwind_backtrace) from [<c010a1c5>] (show_stack+0x11/0x14) [<c010a1c5>] (show_stack) from [<c0973925>] (dump_stack+0x85/0x94) [<c0973925>] (dump_stack) from [<c011f529>] (__warn+0xc1/0xc4) [<c011f529>] (__warn) from [<c011f7e9>] (warn_slowpath_fmt+0x61/0x78) [<c011f7e9>] (warn_slowpath_fmt) from [<c042497d>] (__list_del_entry_valid+0x45/0xac) [<c042497d>] (__list_del_entry_valid) from [<c047a87f>] (tegra_dma_tasklet+0x5b/0x154) [<c047a87f>] (tegra_dma_tasklet) from [<c0124799>] (tasklet_action_common.constprop.0+0x41/0x7c) [<c0124799>] (tasklet_action_common.constprop.0) from [<c01022ab>] (__do_softirq+0xd3/0x2a8) [<c01022ab>] (__do_softirq) from [<c0124683>] (irq_exit+0x7b/0x98) [<c0124683>] (irq_exit) from [<c0168c19>] (__handle_domain_irq+0x45/0x80) [<c0168c19>] (__handle_domain_irq) from [<c043e429>] (gic_handle_irq+0x45/0x7c) [<c043e429>] (gic_handle_irq) from [<c0101aa5>] (__irq_svc+0x65/0x94) Exception stack(0xde2ebb90 to 0xde2ebbd8) Signed-off-by: Dmitry Osipenko <[email protected]> Acked-by: Jon Hunter <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Paolo Pisati <[email protected]>

This commit fixes the following checkpatch.pl errors: ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#535: FILE: ./hal/HalBtcOutSrc.h:535: +void EXhalbtcoutsrc_PowerOnSetting(struct BTC_COEXIST * pBtCoexist); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#536: FILE: ./hal/HalBtcOutSrc.h:536: +void EXhalbtcoutsrc_InitHwConfig(struct BTC_COEXIST * pBtCoexist, u8 bWifiOnly); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#537: FILE: ./hal/HalBtcOutSrc.h:537: +void EXhalbtcoutsrc_InitCoexDm(struct BTC_COEXIST * pBtCoexist); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#538: FILE: ./hal/HalBtcOutSrc.h:538: +void EXhalbtcoutsrc_IpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#539: FILE: ./hal/HalBtcOutSrc.h:539: +void EXhalbtcoutsrc_LpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#540: FILE: ./hal/HalBtcOutSrc.h:540: +void EXhalbtcoutsrc_ScanNotify(struct BTC_COEXIST * pBtCoexist, u8 type); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#541: FILE: ./hal/HalBtcOutSrc.h:541: +void EXhalbtcoutsrc_ConnectNotify(struct BTC_COEXIST * pBtCoexist, u8 action); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#543: FILE: ./hal/HalBtcOutSrc.h:543: + struct BTC_COEXIST * pBtCoexist, enum RT_MEDIA_STATUS mediaStatus ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#545: FILE: ./hal/HalBtcOutSrc.h:545: +void EXhalbtcoutsrc_SpecialPacketNotify(struct BTC_COEXIST * pBtCoexist, u8 pktType); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#547: FILE: ./hal/HalBtcOutSrc.h:547: + struct BTC_COEXIST * pBtCoexist, u8 *tmpBuf, u8 length ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#549: FILE: ./hal/HalBtcOutSrc.h:549: +void EXhalbtcoutsrc_HaltNotify(struct BTC_COEXIST * pBtCoexist); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#550: FILE: ./hal/HalBtcOutSrc.h:550: +void EXhalbtcoutsrc_PnpNotify(struct BTC_COEXIST * pBtCoexist, u8 pnpState); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#551: FILE: ./hal/HalBtcOutSrc.h:551: +void EXhalbtcoutsrc_Periodical(struct BTC_COEXIST * pBtCoexist); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#555: FILE: ./hal/HalBtcOutSrc.h:555: +void EXhalbtcoutsrc_DisplayBtCoexInfo(struct BTC_COEXIST * pBtCoexist); Signed-off-by: Marco Cesati <[email protected]>

This commit fixes the following checkpatch.pl errors: ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#535: FILE: ./hal/HalBtcOutSrc.h:535: +void EXhalbtcoutsrc_PowerOnSetting(struct BTC_COEXIST * pBtCoexist); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#536: FILE: ./hal/HalBtcOutSrc.h:536: +void EXhalbtcoutsrc_InitHwConfig(struct BTC_COEXIST * pBtCoexist, u8 bWifiOnly); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#537: FILE: ./hal/HalBtcOutSrc.h:537: +void EXhalbtcoutsrc_InitCoexDm(struct BTC_COEXIST * pBtCoexist); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#538: FILE: ./hal/HalBtcOutSrc.h:538: +void EXhalbtcoutsrc_IpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#539: FILE: ./hal/HalBtcOutSrc.h:539: +void EXhalbtcoutsrc_LpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#540: FILE: ./hal/HalBtcOutSrc.h:540: +void EXhalbtcoutsrc_ScanNotify(struct BTC_COEXIST * pBtCoexist, u8 type); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#541: FILE: ./hal/HalBtcOutSrc.h:541: +void EXhalbtcoutsrc_ConnectNotify(struct BTC_COEXIST * pBtCoexist, u8 action); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#543: FILE: ./hal/HalBtcOutSrc.h:543: + struct BTC_COEXIST * pBtCoexist, enum RT_MEDIA_STATUS mediaStatus ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#545: FILE: ./hal/HalBtcOutSrc.h:545: +void EXhalbtcoutsrc_SpecialPacketNotify(struct BTC_COEXIST * pBtCoexist, u8 pktType); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#547: FILE: ./hal/HalBtcOutSrc.h:547: + struct BTC_COEXIST * pBtCoexist, u8 *tmpBuf, u8 length ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#549: FILE: ./hal/HalBtcOutSrc.h:549: +void EXhalbtcoutsrc_HaltNotify(struct BTC_COEXIST * pBtCoexist); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#550: FILE: ./hal/HalBtcOutSrc.h:550: +void EXhalbtcoutsrc_PnpNotify(struct BTC_COEXIST * pBtCoexist, u8 pnpState); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#551: FILE: ./hal/HalBtcOutSrc.h:551: +void EXhalbtcoutsrc_Periodical(struct BTC_COEXIST * pBtCoexist); ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#555: FILE: ./hal/HalBtcOutSrc.h:555: +void EXhalbtcoutsrc_DisplayBtCoexInfo(struct BTC_COEXIST * pBtCoexist); Reviewed-by: Dan Carpenter <[email protected]> Signed-off-by: Marco Cesati <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

Introduce `Opaque` type and use it in `sync` module.

Kefeng Wang and others added 30 commits February 4, 2017 09:47

jsaxer closed this Mar 28, 2018

ojeda added a commit to ojeda/linux that referenced this pull request Nov 11, 2021

Merge pull request torvalds#538 from wedsonaf/opaque

7d1f09f

Introduce `Opaque` type and use it in `sync` module.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Aosp optee 4.9 #538

Aosp optee 4.9 #538

jsaxer commented Mar 28, 2018

Aosp optee 4.9 #538

Aosp optee 4.9 #538

Conversation

jsaxer commented Mar 28, 2018