Image Sequencer

Why

Image Sequencer is different from other image processing systems in that it's non-destructive: instead of modifying the original image, it creates a new image at each step in a sequence. This is because it:

• produces a legible trail of operations, to "show your work" for evidential, educational, or reproducibility reasons
• makes the creation of new tools or "modules" simpler -- each must accept an input image, and produce an output image
• allows many images to be run through the same sequence of steps
• works identically in the browser, on Node.js, and on the command line

It is also for prototyping some other related ideas:

• filter-like image processing -- applying a transform to an image from a given source, like a proxy. I.e. every image tile of a satellite imagery web map
• test-based image processing -- the ability to create a sequence of steps that do the same task as some other image processing tool, provable with example before/after images to compare with
• logging of each step to produce an evidentiary record of modifications to an original image
• cascading changes -- change an earlier step's settings, and see those changes affect later steps
• "small modules"-based extensibility: see Contributing

Examples

• Simple Demo

A diagram of this running 5 steps on a single sample image may help explain how it works:

Jump to:

• Installation
• Quick Usage
• CLI Usage
• Classic Usage
• Method Chaining
• Multiple Images
• Creating a User Interface
• Contributing
• Submit a Module
• Get Demo Bookmarklet

Installation

This library works in the browser, in Node, and on the command line (CLI), which we think is great.

Unix based platforms

You can set up a local environment to test the UI with sudo npm run setup followed by npm start

Windows

Our npm scripts do not support windows shells, please run the following snippet in PowerShell.

npm i ; npm i -g grunt grunt-cli ; grunt serve

In case of a port conflict please run the following

npm i -g http-server ; http-server -p 3000

Browser

Just include image-sequencer.js in the Head section of your web page. See the demo here!

Node (via NPM)

(You must have NPM for this) Add image-sequencer to your list of dependencies and run $ npm install

CLI

Globally install Image Sequencer:

$ npm install image-sequencer -g

(You should have Node.JS and NPM for this.)

To run the debug script

$ npm run debug invert

Quick Usage

Image Sequencer can be used to run modules on an HTML Image Element using the replaceImage method. The method accepts two parameters - selector and steps. selector is a CSS selector. If it matches multiple images, all images will be modified. steps may be the name of a module or array of names of modules.

Note: Browser CORS Restrictions apply. Some browsers may not allow local images from other folders, and throw a Security Error instead.

  sequencer.replaceImage(selector,steps,optional_options);

optional_options allows passing additional arguments to the module itself.

For example:

  sequencer.replaceImage('#photo','invert');
  sequencer.replaceImage('#photo',['invert','ndvi-red']);

Data URL usage

Since Image Sequencer uses data-urls, you can initiate a new sequence by providing an image in the data URL format, which will import into the demo and run:

Try this example link with a very small Data URL

To produce a data URL from an HTML image, see this nice blog post with example code.

CLI Usage

Image Sequencer also provides a CLI for applying operations to local files. The CLI takes the following arguments:

-i  | --image [PATH/URL] | Input image URL. (required)
-s  | --step [step-name] | Name of the step to be added. (required)
-b  | --basic            | Basic mode only outputs the final image
-o  | --output [PATH]    | Directory where output will be stored. (optional)
-c  | --config {object} | Options for the step. (optional)
--save-sequence [string] | Name space separated with Stringified sequence to save
--install-module [string] | Module name space seaprated npm package name

The basic format for using the CLI is as follows:

    $ ./index.js -i [PATH] -s step-name

NOTE: On Windows you'll have to use node index.js instead of ./index.js.

The CLI also can take multiple steps at once, like so:

    $ ./index.js -i [PATH] -s "step-name-1 step-name-2 ..."

But for this, double quotes must wrap the space-separated steps.

Options for the steps can be passed in one line as JSON in the details option like

$ ./index.js -i [PATH] -s "brightness" -c '{"brightness":50}'

Or the values can be given through terminal prompt like

save-sequence option can be used to save a sequence and the associated options for later usage. You should provide a string which contains a name of the sequence space separated from the sequence of steps which constitute it.

sequencer --save-sequence "invert-colormap invert(),colormap()"

install-module option can be used to install new modules from npm. You can register this module in your sequencer with a custom namespace separated with the npm package name. Below is an example of the image-sequencer-invert module.

sequencer --install-module "invert image-sequencer-invert"

The CLI is also chainable with other commands using &&

sequencer -i <Image Path> -s <steps> && mv <Output Image Path> <New path>

Classic Usage

Initializing the Sequencer

The Image Sequencer Library exports a function ImageSequencer which initializes a sequencer.

var sequencer = ImageSequencer();

Loading an Image into the Sequencer

The loadImage method is used to load an image into the sequencer. It accepts a name and an image. The method also accepts an optional callback.

sequencer.loadImage(image_src,optional_callback);

On Node.js the image_src may be a DataURI or a local path or a URL.

On browsers, it may be a DatURI, a local image or a URL (Unless this violates CORS Restrictions). To sum up, these are accepted:

• Images in the same domain (or directory - for a local implementation)
• CORS-Proof images in another domain.
• DataURLs

return value: none (A callback should be used to ensure the image gets loaded) The callback is called within the scope of a sequencer. For example: (addSteps is defined later)

sequencer.loadImage('SRC',function(){
  this.addSteps('module-name');
});

The this refers to all the images added in the parent loadImages function only. In this case, only 'SRC'.

Adding steps to the image

The addSteps method is used to add steps to the image. One or more steps can be added at a time. Each step is called a module.

sequencer.addSteps(modules, optional_options);

If only one module is to be added, modules is simply the name of the module. If multiple images are to be added, modules is an array of the names of modules which are to be added, in that particular order.

optional_otions is just additional parameters, in object form, which you might want to provide to the modules. It's an optional parameter.

return value: sequencer (To allow method chaining)

Running the Sequencer

Once all steps are added, This method is used to generate the output of all these modules.

sequencer.run();

Sequencer can be run with a custom config object

// The config object enables custom progress bars in a node environment and
// ability to run the sequencer from a particular index(of the steps array)

sequencer.run(config);

The config object can have the following keys

config: {
  progressObj: , //A custom object to handle progress bar
  index: //Index to run the sequencer from (defaults to 0)
}

Additionally, an optional callback function can be passed to this method.

sequencer.run(function callback(out){
  // this gets called back.
  // "out" is the DataURL of the final image.
});
sequencer.run(config,function callback(out){
  // the callback is supported by all types of invocations
});

return value: sequencer (To allow method chaining)

Removing a step from the sequencer

The removeSteps method is used to remove unwanted steps from the sequencer. It accepts the index of the step as an input or an array of the unwanted indices if there are more than one.

For example, if the modules ['ndvi-red','crop','invert'] were added in this order, and I wanted to remove 'crop' and 'invert', I can either do this:

sequencer.removeSteps(2);
sequencer.removeSteps(3);

or:

sequencer.removeSteps([2,3]);

return value: sequencer (To allow method chaining)

Inserting a step in between the sequencer

The insertSteps method can be used to insert one or more steps at a given index in the sequencer. It accepts the index where the module is to be inserted, the name of the module, and an optional options parameter. index is the index of the inserted step. Only one step can be inserted at a time. optional_options plays the same role it played in addSteps.

Indexes can be negative. Negative sign with an index means that counting will be done in reverse order. If the index is out of bounds, the counting will wrap in the original direction of counting. So, an index of -1 means that the module is inserted at the end.

sequencer.insertSteps(index,module_name,optional_options);

return value: sequencer (To allow method chaining)

Importing an independent module

The loadNewModule method can be used to import a new module inside the sequencer. Modules can be downloaded via npm, yarn or CDN and are imported with a custom name. If you wish to load a new module at runtime, it will need to avoid using require() -- unless it is compiled with a system like browserify or webpack.

const module = require('sequencer-moduleName')
sequencer.loadNewModule('moduleName',module);

Method Chaining

Methods can be chained on the Image Sequencer:

• loadImage()/loadImages() can only terminate a chain.
• run() can not be in the middle of the chain.
• If the chain starts with loadImage() or loadImages(), the following methods are applied only to the newly loaded images.
• If no name is provided to the image, a name will be generated for it. The name will be of the form "image". For Ex: "image1", "image2", "image3", etc.

Valid Chains:

sequencer.loadImage('red',function(){
  this.addSteps('invert').run(function(out){
    //do something with ouptut.
  });
})
sequencer.addSteps(['ndvi-red','invert']).run();
et cetra.

Invalid Chains:

sequencer.addSteps('invert').run().addSteps('ndvi-red');

Multiple Images

Image Sequencer is capable of handling multiple images at once.

Initializing a sequencer with multiple images.

This is just like before.

var sequencer = ImageSequencer();

Loading Multiple Images into the Sequencer

Multiple images can be loaded by the method loadImages. Everything is the same, except that now, a unique identification called image_name has to be provided with each image. This is a string literal.

• 3/2 parameters :

  sequencer.loadImages(image_name,
    image_src,optional_callback);

• 1/2 parameters (JSON) :

  sequencer.loadImages({
    images: {
      image1_name: image_src,
      image2_name: image_src,
      ...
    },
    callback: optional_callback
  });

return value: none

Adding Steps on Multiple Images

The same method addSteps is used for this. There's just a slight obvious change in the syntax that the image name has to be supplied too. image_name as well as, module_name in the following examples can be either strings or arrays of strings.

sequencer.addSteps(image_name,module_name,optional_options);

If no Image Name is specified, the module is added to all images.

sequencer.addSteps(module_name,optional_options);

All this can be passed in as JSON:

sequencer.addSteps({
  image1_name: {name: module_name, o: optional_options},
  image2_name: {name: module_name, o: optional_options},
  ...
});

return value: sequencer (To allow method chaining)

Running a Sequencer with multiple images

The same run method can be used with a slight change in syntax. The run method accepts parameters image and from. from is the index from where the function starts generating output. By default, it will run across all the steps. (from = 1) If no image is specified, the sequencer will be run over all the images. image_name may be an array of image names.

sequencer.run(); //All images from first step

sequencer.run(image_name,from); //Image 'image' from 'from'

The run method also accepts an optional callback just like before:

  sequencer.run(image_name,from,function(out){
    // This gets called back.
    // "out" is the DataURL of final image.
  });

JSON input is also acceptable.

sequencer.run({
  image1_name: from,
  image2_name: from,
  ...
});

return value: sequencer (To allow method chaining)

Removing Steps from an Image

Similarly, removeSteps can also accept an image_name parameter. Either, both, or none of image_name and steps them may be an array. JSON input is also acceptable.

sequencer.removeSteps("image_name",[steps]);

sequencer.removeSteps("image_name",step);

sequencer.removeSteps({
  image1_name: [steps],
  image2_name: [steps],
  ...
});

return value: sequencer (To allow method chaining)

Inserting steps on an image

The insertSteps method can also accept an image_name parameter. image_name may be an array. Everything else remains the same. JSON Input is acceptable too.

sequencer.insertSteps("image",index,"module_name",o);

sequencer.insertSteps([image],index,"module_name",o);

sequencer.insertSteps({
  image1: [
    {index:index1, name: module_name1, o:optional_options1},
    {index:index2, name: module_name2, o:optional_options2},
    ...
  ]
});

return value: sequencer (To allow method chaining)

Saving Sequences

IMAGE SEQUENCER supports saving a sequence of modules and their associated settings in a simple string syntax. These sequences can be saved in the local storage inside the browser and inside a JSON file in node.js. sequences can be saved in node context using the CLI option

--save-sequence "name stringified-sequence"

In Node and the browser the following function can be used

sequencer.saveSequence(name,sequenceString)

The function sequencer.loadModules() reloads the modules and the saved sequences into sequencer.modules and sequencer.sequences

String syntax

Image sequencer supports stringifying a sequence which is appended to the url and hence can then be shared. An example below shows the string syntax for channel and invert module

channel{channel:green},invert{}

Sequencer also supports the use of () in place of {} for backward compatibility with older links. (This syntax is deprecated and should be avoided as far as possible)

channel(channel:green),invert()

Following are the core API functions that can be used to stringify and jsonify steps.

sequencer.toString() //returns the stringified sequence of current steps
sequencer.toJSON(str) // returns the JSON for the current sequence
sequencer.stringToJSON(str) // returns the JSON for given stringified sequence
sequencer.importString(str) //Imports the sequence of steps into sequencer
sequencer.importJSON(obj) //Imports the given sequence of JSON steps into sequencer

Image Sequencer can also generate a string for usage in the CLI for the current sequence of steps:

sequencer.toCliString()

Creating a User Interface

Image Sequencer provides the following events which can be used to generate a UI:

• onSetup : this event is triggered when a new module is set up. This can be used, for instance, to generate a DIV element to store the generated image for that step.
• onDraw : This event is triggered when Image Sequencer starts drawing the output for a module. This can be used, for instance, to overlay a loading GIF over the DIV generated above.
• onComplete : This event is triggered when Image Sequencer has drawn the output for a module. This can be used, for instance, to update the DIV with the new image and remove the loading GIF generated above.
• onRemove : This event is triggered when a module is removed. This can be used, for instance, to remove the DIV generated above.

How to define these functions:

sequencer.setUI({
  onSetup: function(step) {},
  onDraw: function(step) {},
  onComplete: function(step) {},
  onRemove: function(step) {}
});

These methods can be defined and re-defined at any time, but it is advisable to set them before any module is added and not change it thereafter. This is because the setUI method will only affect the modules added after setUI is called.

The onComplete event is passed on the output of the module.

Image Sequencer provides a namespace step for the purpose of UI Creation in the scope of these definable function. This namespace has the following predefined properties:

• step.name : (String) Name of the step
• step.ID : (Number) An ID given to every step of the sequencer, unique throughout.
• step.imageName : (String) Name of the image the step is applied to.
• step.output : (DataURL String) Output of the step.
• step.inBrowser : (Boolean) Whether the client is a browser or not

In addition to these, one might define their own properties, which shall be accessible across all the event scopes of that step.

For example :

sequencer.setUI({
  onSetup: function(step){
    // Create new property "step.image"
    step.image = document.createElement('img');
    document.body.append(step.image);
  },
  onComplete: function(step){
    // Access predefined "step.output" and user-defined "step.image"
    step.image.src = step.output;
  },
  onRemove: function(step){
    // Access user-defined "step.image"
    step.image.remove();
  }
});

Note: identity.imageName is the "name" of that particular image. This name can be specified while loading the image via sequencer.loadImage("name","SRC"). If not specified, the name of a loaded image defaults to a name like "image1", "image2", et cetra.

Details of all modules can be sought using sequencer.modulesInfo(). This method returns an object which defines the name and inputs of the modules. If a module name (hyphenated) is passed in the method, then only the details of that module are returned.