Merge pull request #3975 from lucasec/t6183

T6183: interfaces openvpn: suppport specifying IP protocol version

data/templates/openvpn/server.conf.j2

@@ -11,11 +11,11 @@ dev-type {{ device_type }}
 dev {{ ifname }}
 persist-key
 {% if protocol is vyos_defined('tcp-active') %}
-proto tcp-client
+proto tcp{{ protocol_modifier }}-client
 {% elif protocol is vyos_defined('tcp-passive') %}
-proto tcp-server
+proto tcp{{ protocol_modifier }}-server
 {% else %}
-proto udp
+proto udp{{ protocol_modifier }}
 {% endif %}
 {% if local_host is vyos_defined %}
 local {{ local_host }}
@@ -63,6 +63,9 @@ nobind
 #
 # OpenVPN Server mode
 #
+{%     if ip_version is vyos_defined('ipv6') %}
+bind ipv6only
+{%     endif %}
 mode server
 tls-server
 {%     if server is vyos_defined %}
@@ -131,6 +134,9 @@ plugin "{{ plugin_dir }}/openvpn-otp.so" "otp_secrets=/config/auth/openvpn/{{ if
 #
 # OpenVPN site-2-site mode
 #
+{%     if ip_version is vyos_defined('ipv6') %}
+bind ipv6only
+{%     endif %}
 ping {{ keep_alive.interval }}
 ping-restart {{ keep_alive.failure_count }}
 

interface-definitions/interfaces_openvpn.xml.in

@@ -318,6 +318,34 @@
             </properties>
             <defaultValue>udp</defaultValue>
           </leafNode>
+          <leafNode name="ip-version">
+            <properties>
+              <help>Force OpenVPN to use a specific IP protocol version</help>
+              <completionHelp>
+                <list>auto ipv4 ipv6 dual-stack</list>
+              </completionHelp>
+              <valueHelp>
+                <format>auto</format>
+                <description>Select one IP protocol to use based on local or remote host</description>
+              </valueHelp>
+              <valueHelp>
+                <format>_ipv4</format>
+                <description>Accept connections on or initate connections to IPv4 addresses only</description>
+              </valueHelp>
+              <valueHelp>
+                <format>_ipv6</format>
+                <description>Accept connections on or initate connections to IPv6 addresses only</description>
+              </valueHelp>
+              <valueHelp>
+                <format>dual-stack</format>
+                <description>Accept connections on both protocols simultaneously (only supported in server mode)</description>
+              </valueHelp>
+              <constraint>
+                <regex>(auto|ipv4|ipv6|dual-stack)</regex>
+              </constraint>
+            </properties>
+            <defaultValue>auto</defaultValue>
+          </leafNode>
           <leafNode name="remote-address">
             <properties>
               <help>IP address of remote end of tunnel</help>

smoketest/scripts/cli/test_interfaces_openvpn.py

@@ -250,6 +250,67 @@ def test_openvpn_client_interfaces(self):
             interface = f'vtun{ii}'
             self.assertNotIn(interface, interfaces())
 
+    def test_openvpn_client_ip_version(self):
+        # Test the client mode behavior combined with different IP protocol versions
+
+        interface = 'vtun10'
+        remote_host = '192.0.2.10'
+        remote_host_v6 = 'fd00::2:10'
+        path = base_path + [interface]
+        auth_hash = 'sha1'
+
+        # Default behavior: client uses uspecified protocol version (udp)
+        self.cli_set(path + ['device-type', 'tun'])
+        self.cli_set(path + ['encryption', 'data-ciphers', 'aes256'])
+        self.cli_set(path + ['hash', auth_hash])
+        self.cli_set(path + ['mode', 'client'])
+        self.cli_set(path + ['persistent-tunnel'])
+        self.cli_set(path + ['protocol', 'udp'])
+        self.cli_set(path + ['remote-host', remote_host])
+        self.cli_set(path + ['remote-port', remote_port])
+        self.cli_set(path + ['tls', 'ca-certificate', 'ovpn_test'])
+        self.cli_set(path + ['tls', 'certificate', 'ovpn_test'])
+        self.cli_set(path + ['vrf', vrf_name])
+        self.cli_set(path + ['authentication', 'username', interface+'user'])
+        self.cli_set(path + ['authentication', 'password', interface+'secretpw'])
+
+        self.cli_commit()
+
+        config_file = f'/run/openvpn/{interface}.conf'
+        config = read_file(config_file)
+
+        self.assertIn(f'dev vtun10', config)
+        self.assertIn(f'dev-type tun', config)
+        self.assertIn(f'persist-key', config)
+        self.assertIn(f'proto udp', config)
+        self.assertIn(f'rport {remote_port}', config)
+        self.assertIn(f'remote {remote_host}', config)
+        self.assertIn(f'persist-tun', config)
+
+        # IPv4 only: client usees udp4 protocol
+        self.cli_set(path + ['ip-version', 'ipv4'])
+        self.cli_commit()
+
+        config = read_file(config_file)
+        self.assertIn(f'proto udp4', config)
+
+        # IPv6 only: client uses udp6 protocol
+        self.cli_set(path + ['ip-version', 'ipv6'])
+        self.cli_delete(path + ['remote-host', remote_host])
+        self.cli_set(path + ['remote-host', remote_host_v6])
+        self.cli_commit()
+
+        config = read_file(config_file)
+        self.assertIn(f'proto udp6', config)
+
+        # IPv6 dual-stack: not allowed in client mode
+        self.cli_set(path + ['ip-version', 'dual-stack'])
+        with self.assertRaises(ConfigSessionError):
+            self.cli_commit()
+
+        self.cli_delete(base_path)
+        self.cli_commit()
+
     def test_openvpn_server_verify(self):
         # Create one OpenVPN server interface and check required verify() stages
         interface = 'vtun5000'
@@ -453,6 +514,74 @@ def test_openvpn_server_subnet_topology(self):
             interface = f'vtun{ii}'
             self.assertNotIn(interface, interfaces())
 
+    def test_openvpn_server_ip_version(self):
+        # Test the server mode behavior combined with each IP protocol version
+
+        auth_hash = 'sha256'
+        port = '2000'
+
+        interface = 'vtun20'
+        subnet = '192.0.20.0/24'
+        path = base_path + [interface]
+
+        # Default behavior: client uses uspecified protocol version (udp)
+        self.cli_set(path + ['device-type', 'tun'])
+        self.cli_set(path + ['encryption', 'data-ciphers', 'aes192'])
+        self.cli_set(path + ['hash', auth_hash])
+        self.cli_set(path + ['mode', 'server'])
+        self.cli_set(path + ['local-port', port])
+        self.cli_set(path + ['server', 'subnet', subnet])
+        self.cli_set(path + ['server', 'topology', 'subnet'])
+
+        self.cli_set(path + ['replace-default-route'])
+        self.cli_set(path + ['tls', 'ca-certificate', 'ovpn_test'])
+        self.cli_set(path + ['tls', 'certificate', 'ovpn_test'])
+        self.cli_set(path + ['tls', 'dh-params', 'ovpn_test'])
+
+        self.cli_commit()
+
+        start_addr = inc_ip(subnet, '2')
+        stop_addr = last_host_address(subnet)
+
+        config_file = f'/run/openvpn/{interface}.conf'
+        config = read_file(config_file)
+
+        self.assertIn(f'dev {interface}', config)
+        self.assertIn(f'dev-type tun', config)
+        self.assertIn(f'persist-key', config)
+        self.assertIn(f'proto udp', config) # default protocol
+        self.assertIn(f'auth {auth_hash}', config)
+        self.assertIn(f'data-ciphers AES-192-CBC', config)
+        self.assertIn(f'topology subnet', config)
+        self.assertIn(f'lport {port}', config)
+        self.assertIn(f'push "redirect-gateway def1"', config)
+
+        # IPv4 only: server usees udp4 protocol
+        self.cli_set(path + ['ip-version', 'ipv4'])
+        self.cli_commit()
+
+        config = read_file(config_file)
+        self.assertIn(f'proto udp4', config)
+
+        # IPv6 only: server uses udp6 protocol + bind ipv6only
+        self.cli_set(path + ['ip-version', 'ipv6'])
+        self.cli_commit()
+
+        config = read_file(config_file)
+        self.assertIn(f'proto udp6', config)
+        self.assertIn(f'bind ipv6only', config)
+
+        # IPv6 dual-stack: server uses udp6 protocol without bind ipv6only
+        self.cli_set(path + ['ip-version', 'dual-stack'])
+        self.cli_commit()
+
+        config = read_file(config_file)
+        self.assertIn(f'proto udp6', config)
+        self.assertNotIn(f'bind ipv6only', config)
+
+        self.cli_delete(base_path)
+        self.cli_commit()
+
     def test_openvpn_site2site_verify(self):
         # Create one OpenVPN site2site interface and check required
         # verify() stages
@@ -627,6 +756,63 @@ def test_openvpn_site2site_interfaces_tun(self):
             self.assertNotIn(interface, interfaces())
 
 
+    def test_openvpn_site2site_ip_version(self):
+        # Test the site-to-site mode behavior combined with each IP protocol version
+
+        encryption_cipher = 'aes256'
+
+        interface = 'vtun30'
+        local_address = '192.0.30.1'
+        local_address_subnet = '255.255.255.252'
+        remote_address = '172.16.30.1'
+        path = base_path + [interface]
+        port = '3030'
+
+        self.cli_set(path + ['local-address', local_address])
+        self.cli_set(path + ['device-type', 'tun'])
+        self.cli_set(path + ['mode', 'site-to-site'])
+        self.cli_set(path + ['local-port', port])
+        self.cli_set(path + ['remote-port', port])
+        self.cli_set(path + ['shared-secret-key', 'ovpn_test'])
+        self.cli_set(path + ['remote-address', remote_address])
+        self.cli_set(path + ['encryption', 'cipher', encryption_cipher])
+
+        self.cli_commit()
+
+        config_file = f'/run/openvpn/{interface}.conf'
+        config = read_file(config_file)
+
+        self.assertIn(f'dev-type tun', config)
+        self.assertIn(f'ifconfig {local_address} {remote_address}', config)
+        self.assertIn(f'proto udp', config)
+        self.assertIn(f'dev {interface}', config)
+        self.assertIn(f'secret /run/openvpn/{interface}_shared.key', config)
+        self.assertIn(f'lport {port}', config)
+        self.assertIn(f'rport {port}', config)
+
+        # IPv4 only: server usees udp4 protocol
+        self.cli_set(path + ['ip-version', 'ipv4'])
+        self.cli_commit()
+
+        config = read_file(config_file)
+        self.assertIn(f'proto udp4', config)
+
+        # IPv6 only: server uses udp6 protocol + bind ipv6only
+        self.cli_set(path + ['ip-version', 'ipv6'])
+        self.cli_commit()
+
+        config = read_file(config_file)
+        self.assertIn(f'proto udp6', config)
+        self.assertIn(f'bind ipv6only', config)
+
+        # IPv6 dual-stack: not allowed in site-to-site mode
+        self.cli_set(path + ['ip-version', 'dual-stack'])
+        with self.assertRaises(ConfigSessionError):
+            self.cli_commit()
+
+        self.cli_delete(base_path)
+        self.cli_commit()
+
     def test_openvpn_server_server_bridge(self):
         # Create OpenVPN server interface using bridge.
         # Validate configuration afterwards.

src/conf_mode/interfaces_openvpn.py

@@ -123,6 +123,18 @@ def get_config(config=None):
             openvpn['module_load_dco'] = {}
             break
 
+    # Calculate the protocol modifier. This is concatenated to the protocol string to direct
+    # OpenVPN to use a specific IP protocol version. If unspecified, the kernel decides which
+    # type of socket to open. In server mode, an additional "ipv6-dual-stack" option forces
+    # binding the socket in IPv6 mode, which can also receive IPv4 traffic (when using the
+    # default "ipv6" mode, we specify "bind ipv6only" to disable kernel dual-stack behaviors).
+    if openvpn['ip_version'] == 'ipv4':
+        openvpn['protocol_modifier'] = '4'
+    elif openvpn['ip_version'] in ['ipv6', 'dual-stack']:
+        openvpn['protocol_modifier']  = '6'
+    else:
+        openvpn['protocol_modifier'] = ''
+
     return openvpn
 
 def is_ec_private_key(pki, cert_name):
@@ -257,13 +269,19 @@ def verify(openvpn):
         if openvpn['protocol'] == 'tcp-passive':
             raise ConfigError('Protocol "tcp-passive" is not valid in client mode')
 
+        if 'ip_version' in openvpn and openvpn['ip_version'] == 'dual-stack':
+            raise ConfigError('"ip-version dual-stack" is not supported in client mode')
+
         if dict_search('tls.dh_params', openvpn):
             raise ConfigError('Cannot specify "tls dh-params" in client mode')
 
     #
     # OpenVPN site-to-site - VERIFY
     #
     elif openvpn['mode'] == 'site-to-site':
+        if 'ip_version' in openvpn and openvpn['ip_version'] == 'dual-stack':
+            raise ConfigError('"ip-version dual-stack" is not supported in site-to-site mode')
+
         if 'local_address' not in openvpn and 'is_bridge_member' not in openvpn:
             raise ConfigError('Must specify "local-address" or add interface to bridge')
 
@@ -487,6 +505,25 @@ def verify(openvpn):
     # not depending on any operation mode
     #
 
+    # verify that local_host/remote_host match with any ip_version override
+    # specified (if a dns name is specified for remote_host, no attempt is made
+    # to verify that record resolves to an address of the configured family)
+    if 'local_host' in openvpn:
+        if openvpn['ip_version'] == 'ipv4' and is_ipv6(openvpn['local_host']):
+            raise ConfigError('Cannot use an IPv6 "local-host" with "ip-version ipv4"')
+        elif openvpn['ip_version'] == 'ipv6' and is_ipv4(openvpn['local_host']):
+            raise ConfigError('Cannot use an IPv4 "local-host" with "ip-version ipv6"')
+        elif openvpn['ip_version'] == 'dual-stack':
+            raise ConfigError('Cannot use "local-host" with "ip-version dual-stack". "dual-stack" is only supported when OpenVPN binds to all available interfaces.')
+
+    if 'remote_host' in openvpn:
+        remote_hosts = dict_search('remote_host', openvpn)
+        for remote_host in remote_hosts:
+            if openvpn['ip_version'] == 'ipv4' and is_ipv6(remote_host):
+                raise ConfigError('Cannot use an IPv6 "remote-host" with "ip-version ipv4"')
+            elif openvpn['ip_version'] == 'ipv6' and is_ipv4(remote_host):
+                raise ConfigError('Cannot use an IPv4 "remote-host" with "ip-version ipv6"')
+
     # verify specified IP address is present on any interface on this system
     if 'local_host' in openvpn:
         if not is_addr_assigned(openvpn['local_host']):