fix(deps): update module go.opentelemetry.io/collector/pdata to v1.9.0

[renovate]

This PR contains the following updates:

Package	Change	Age	Adoption	Passing	Confidence
go.opentelemetry.io/collector/pdata	v1.0.0 -> v1.9.0

---

Release Notes

open-telemetry/opentelemetry-collector (go.opentelemetry.io/collector/pdata)

v1.9.0

🛑 Breaking changes 🛑

• envprovider: Restricts Environment Variable names. Environment variable names must now be ASCII only and start with a letter or an underscore, and can only contain underscores, letters, or numbers. (#​9531)
• confighttp: Apply MaxRequestBodySize to the result of a decompressed body (#​10289)
  When using compressed payloads, the Collector would verify only the size of the compressed payload.
  This change applies the same restriction to the decompressed content. As a security measure, a limit of 20 MiB was added, which makes this a breaking change.
  For most clients, this shouldn't be a problem, but if you often have payloads that decompress to more than 20 MiB, you might want to either configure your
  client to send smaller batches (recommended), or increase the limit using the MaxRequestBodySize option.

💡 Enhancements 💡

• mdatagen: auto-generate utilities to test component telemetry (#​19783)
• mdatagen: support setting an AttributeSet for async instruments (#​9674)
• mdatagen: support using telemetry level in telemetry builder (#​10234)
  This allows components to set the minimum level needed for them to produce telemetry. By default, this is set to configtelemetry.LevelBasic. If the telemetry level is below that minimum level, then the noop meter is used for metrics.
• mdatagen: add support for bucket boundaries for histograms (#​10218)
• releases: add documentation in how to verify the image signatures using cosign (#​9610)

🧰 Bug fixes 🧰

• batchprocessor: ensure attributes are set on cardinality metadata metric (#​9674)
• batchprocessor: Fixing processor_batch_metadata_cardinality which was broken in v0.101.0 (#​10231)
• batchprocessor: respect telemetry level for all metrics (#​10234)
• exporterhelper: Fix potential deadlocks in BatcherSender shutdown (#​10255)

v1.8.0

💡 Enhancements 💡

• mdatagen: generate documentation for internal telemetry (#​10170)

• mdatagen: add ability to use metadata.yaml to automatically generate instruments for components (#​10054)
  The telemetry section in metadata.yaml is used to generate
  instruments for components to measure telemetry about themselves.

• confmap: Allow Converters to write logs during startup (#​10135)

• otelcol: Enable logging during configuration resolution (#​10056)

🧰 Bug fixes 🧰

• mdatagen: Run package tests when goleak is skipped (#​10125)

v1.7.0

🛑 Breaking changes 🛑

• service: The validate sub-command no longer validates that each pipeline's type is the same as its component types (#​10031)

💡 Enhancements 💡

• semconv: Add support for v1.25.0 semantic convention (#​10072)
• builder: remove the need to go get a module to address ambiguous import paths (#​10015)
• pmetric: Support parsing metric.metadata from OTLP JSON. (#​10026)

🧰 Bug fixes 🧰

• exporterhelper: Fix enabled config option for batch sender (#​10076)

v1.6.0

🛑 Breaking changes 🛑

• builder: Add strict version checking when using the builder. Add the temporary flag --skip-strict-versioning for skipping this check. (#​9896)
  Strict version checking will error on major and minor version mismatches
  between the otelcol_version configured and the builder version or versions
  in the go.mod. This check can be temporarily disabled by using the --skip-strict-versioning
  flag. This flag will be removed in a future minor version.

• telemetry: Distributed internal metrics across different levels. (#​7890)
  The internal metrics levels are updated along with reported metrics:

  • The default level is changed from basic to normal, which can be overridden with service::telmetry::metrics::level configuration.
  • Batch processor metrics are updated to be reported starting from normal level:
    • processor_batch_batch_send_size
    • processor_batch_metadata_cardinality
    • processor_batch_timeout_trigger_send
    • processor_batch_size_trigger_send
  • GRPC/HTTP server and client metrics are updated to be reported starting from detailed level:
    • http.client.* metrics
    • http.server.* metrics
    • rpc.server.* metrics
    • rpc.client.* metrics

💡 Enhancements 💡

• confighttp: Disable concurrency in zstd compression (#​8216)

• cmd/builder: Allow configuring confmap.Providers in the builder. (#​4759)
  If no providers are specified, the defaults are used.
  The default providers are: env, file, http, https, and yaml.

  To configure providers, use the providers key in your OCB build
  manifest with a list of Go modules for your providers.
  The modules will work the same as other Collector components.

• mdatagen: enable goleak tests by default via mdatagen (#​9959)

• cmd/mdatagen: support excluding some metrics based on string and regexes in resource_attributes (#​9661)

• cmd/mdatagen: Generate config and factory tests covering their requirements. (#​9940)
  The tests are moved from cmd/builder.

• confmap: Add ProviderSettings, ConverterSettings, ProviderFactories, and ConverterFactories fields to confmap.ResolverSettings (#​9516)
  This allows configuring providers and converters, which are instantiated by NewResolver using the given factories.

🧰 Bug fixes 🧰

• exporter/otlp: Allow DNS scheme to be used in endpoint (#​4274)
• service: fix record sampler configuration (#​9968)
• service: ensure the tracer provider is configured via go.opentelemetry.io/contrib/config (#​9967)
• otlphttpexporter: Fixes a bug that was preventing the otlp http exporter from propagating status. (#​9892)
• confmap: Fix decoding negative configuration values into uints (#​9060)

v1.5.0

🛑 Breaking changes 🛑

• service: emit internal collector metrics with _ instead of / with OTLP export (#​9774)
  This is addressing an issue w/ the names of the metrics generated by the Collector for its
  internal metrics. Note that this change only impacts users that emit telemetry using OTLP, which
  is currently still in experimental support. The prometheus metrics already replaced / with _
  and they will do the same with _.

💡 Enhancements 💡

• mdatagen: Adds unsupported platforms to the README header (#​9794)
• confmap: Clarify the use of embedded structs to make unmarshaling composable (#​7101)
• nopexporter: Promote the nopexporter to beta (#​7316)
• nopreceiver: Promote the nopreceiver to beta (#​7316)
• otlpexporter: Checks for port in the config validation for the otlpexporter (#​9505)
• service: Validate pipeline type against component types (#​8007)

🧰 Bug fixes 🧰

• configtls: Fix issue where IncludeSystemCACertsPool was not consistently used between ServerConfig and ClientConfig. (#​9835)
• component: Fix issue where the components command wasn't properly printing the component type. (#​9856)
• otelcol: Fix issue where the validate command wasn't properly printing valid component type. (#​9866)
• receiver/otlp: Fix bug where the otlp receiver did not properly respond with a retryable error code when possible for http (#​9357)

v1.4.0

🛑 Breaking changes 🛑

• telemetry: Remove telemetry.useOtelForInternalMetrics stable feature gate (#​9752)

🚀 New components 🚀

• exporter/nop: Add the nopexporter to serve as a placeholder exporter in a pipeline (#​7316)
  This is primarily useful for starting the Collector with only extensions enabled
  or to test Collector pipeline throughput.

• receiver/nop: Add the nopreceiver to serve as a placeholder receiver in a pipeline (#​7316)
  This is primarily useful for starting the Collector with only extensions enabled.

💡 Enhancements 💡

• configtls: Validates TLS min_version and max_version (#​9475)
  Introduces Validate() method in TLSSetting.

• configcompression: Mark module as Stable. (#​9571)

• cmd/mdatagen: Use go package name for the scope name by default and add an option to provide the scope name in metadata.yaml. (#​9693)

• cmd/mdatagen: Generate the lifecycle tests for components by default. (#​9683)
  It's encouraged to have lifecycle tests for all components enadled, but they can be disabled if needed
  in metadata.yaml with skip_lifecycle: true and skip_shutdown: true under tests section.

• cmd/mdatagen: optimize the mdatagen for the case like batchprocessor which use a common struct to implement consumer.Traces, consumer.Metrics, consumer.Logs in the meantime. (#​9688)

🧰 Bug fixes 🧰

• exporterhelper: Fix persistent queue size backup on reads. (#​9740)
• processor/batch: Prevent starting unnecessary goroutines. (#​9739)
• otlphttpexporter: prevent error on empty response body when content type is application/json (#​9666)
• confmap: confmap honors Unmarshal methods on config embedded structs. (#​6671)
• otelcol: Respect telemetry configuration when running as a Windows service (#​5300)

v1.3.0

🛑 Breaking changes 🛑

• configgrpc: Remove deprecated GRPCClientSettings, GRPCServerSettings, and ServerConfig.ToListenerContext. (#​9616)
• confighttp: Remove deprecated HTTPClientSettings, NewDefaultHTTPClientSettings, and CORSSettings. (#​9625)
• confignet: Removes deprecated NetAddr and TCPAddr (#​9614)

💡 Enhancements 💡

• configtls: Add include_system_ca_certs_pool to configtls, allowing to load system certs and additional custom certs. (#​7774)
• otelcol: Add ConfigProviderSettings to CollectorSettings (#​4759)
  This allows passing a custom list of confmap.Providers to otelcol.NewCommand.
• pdata: Update to OTLP v1.1.0 (#​9587)
  Introduces Span and SpanLink flags.
• confmap: Update mapstructure to use a maintained fork, github.com/go-viper/mapstructure/v2. (#​9634)
  https://github.com/mitchellh/mapstructure/issues/349/349 for context.

🧰 Bug fixes 🧰

• configretry: Allow max_elapsed_time to be set to 0 for indefinite retries (#​9641)
• client: Make Metadata.Get thread safe (#​9595)

v1.2.0

🛑 Breaking changes 🛑

• all: scope name for all generated Meter/Tracer funcs now includes full package name (#​9494)

💡 Enhancements 💡

• confighttp: Adds support for Snappy decompression of HTTP requests. (#​7632)
• configretry: Validate max_elapsed_time, ensure it is larger than max_interval and initial_interval respectively. (#​9489)
• configopaque: Mark module as stable (#​9167)
• otlphttpexporter: Add support for json content encoding when exporting telemetry (#​6945)
• confmap/converter/expandconverter, confmap/provider/envprovider, confmap/provider/fileprovider, confmap/provider/httprovider, confmap/provider/httpsprovider, confmap/provider/yamlprovider: Split confmap.Converter and confmap.Provider implementation packages out of confmap. (#​4759, #​9460)

v1.1.0

🛑 Breaking changes 🛑

• receiver/otlp: Update gRPC code from codes.InvalidArgument to codes.Internal when a permanent error doesn't contain a gRPC status (#​9415)

🚩 Deprecations 🚩

• configgrpc: Deprecate GRPCClientSettings, use ClientConfig instead (#​6767)

💡 Enhancements 💡

• mdatagen: Add a generated test that checks the config struct using componenttest.CheckConfigStruct (#​9438)

• component: Add component.UseLocalHostAsDefaultHost feature gate that changes default endpoints from 0.0.0.0 to localhost (#​8510)
  The only component in this repository affected by this is the OTLP receiver.

• confighttp: Add support of Host header (#​9395)

• mdatagen: Remove use of ReportFatalError in generated tests (#​9439)

🧰 Bug fixes 🧰

• service: fix opencensus bridge configuration in periodic readers (#​9361)
• otlpreceiver: Fix goroutine leak when GRPC server is started but HTTP server is unsuccessful (#​9165)
• otlpexporter: PartialSuccess is treated as success, logged as warning. (#​9243)

v1.0.1

🛑 Breaking changes 🛑

• exporters/sending_queue: Do not re-enqueue failed batches, rely on the retry_on_failure strategy instead. (#​8382)
  The current re-enqueuing behavior is not obvious and cannot be configured. It takes place only for persistent queue
  and only if retry_on_failure::enabled=true even if retry_on_failure is a setting for a different backoff retry
  strategy. This change removes the re-enqueuing behavior. Consider increasing retry_on_failure::max_elapsed_time
  to reduce chances of data loss or set it to 0 to keep retrying until requests succeed.

• confmap: Make the option WithErrorUnused enabled by default when unmarshaling configuration (#​7102)
  The option WithErrorUnused is now enabled by default, and a new option WithIgnoreUnused is introduced to ignore
  errors about unused fields.

• status: Deprecate ReportComponentStatus in favor of ReportStatus. This new function does not return an error. (#​9148)

🚩 Deprecations 🚩

• connectortest: Deprecate connectortest.New[Metrics|Logs|Traces]Router in favour of connector.New[Metrics|Logs|Traces]Router (#​9095)

• exporterhelper: Deprecate exporterhelper.RetrySettings in favor of configretry.BackOffConfig (#​9091)

• extension/ballast: Deprecate memory_ballast extension. (#​8343)
  Use GOMEMLIMIT environment variable instead.

• connector: Deprecate [Metrics|Logs|Traces]Router in favour of [Metrics|Logs|Traces]RouterAndConsumer (#​9095)

💡 Enhancements 💡

• exporterhelper: Add RetrySettings validation function (#​9089)
  Validate that time.Duration, multiplier values in configretry are non-negative, and randomization_factor is between 0 and 1

• service: Enable telemetry.useOtelForInternalMetrics by updating the flag to beta (#​7454)
  The metrics generated should be consistent with the metrics generated
  previously with OpenCensus. Users can disable the behaviour
  by setting --feature-gates -telemetry.useOtelForInternalMetrics at
  collector start.

• mdatagen: move component from contrib to core (#​9172)

• semconv: Generated Semantic conventions 1.22.0. (#​8686)

• confignet: Add dialer_timeout config option. (#​9066)

• processor/memory_limiter: Update config validation errors (#​9059)

  • Fix names of the config fields that are validated in the error messages
  • Move the validation from start to the initialization phrase

• exporterhelper: Add config Validate for TimeoutSettings (#​9104)

🧰 Bug fixes 🧰

• memorylimiterprocessor: Fixed leaking goroutines from memorylimiterprocessor (#​9099)
• cmd/otelcorecol: Fix the code detecting if the collector is running as a service on Windows. (#​7350)
  Removed the NO_WINDOWS_SERVICE environment variable given it is not needed anymore.
• otlpexporter: remove dependency of otlphttpreceiver on otlpexporter (#​6454)

---

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

---

• If you want to rebase/retry this PR, check this box

---

This PR has been generated by Mend Renovate. View repository job log here.

[renovate]

ℹ Artifact update notice

File name: exporter/discordexporter/go.mod

In order to perform the update(s) described in the table above, Renovate ran the go get command, which resulted in the following additional change(s):

• 7 additional dependencies were updated

Details:

Package	Change
github.com/golang/protobuf	v1.5.3 -> v1.5.4
golang.org/x/crypto	v0.15.0 -> v0.21.0
golang.org/x/net	v0.18.0 -> v0.23.0
golang.org/x/sys	v0.15.0 -> v0.18.0
google.golang.org/genproto/googleapis/rpc	v0.0.0-20230822172742-b8732ec3820d -> v0.0.0-20240318140521-94a12d6c2237
google.golang.org/grpc	v1.59.0 -> v1.64.0
google.golang.org/protobuf	v1.31.0 -> v1.34.1