Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support
The patch adds the following interfaces according the SMARC Spec 1.1 [1] and provided schematics: - SMARC SPI0/1 Note: Since Kontron still uses silicon revisions below 1.3 they have add a spi-nor to implement Workaround Freescale#1 of erratum ERR006282. - SMARC SDIO - SMARC LCD - SMARC HDMI - SMARC Management pins Note: Kontron don't route all of these pins to the i.MX6, some are routed to the SoM CPLD. - SMARC GPIO - SMARC CSI Camera Note: As specified in [1] the data lanes are shared to cover the csi and the parallel case. The case depends on the baseboard so muxing the data lanes is not part of this patch. - SMARC I2S - SMARC Watchdog Note: The watchdog output pin is routed to the CPLD and the SMARC header. The CPLD performs a reset after a 30s timeout so we need to enable the watchdog per default. - SMARC module eeprom Due to the lack of hardware not all of these interfaces are tesetd. [1] https://sget.org/standards/smarc Signed-off-by: Michael Grzeschik <[email protected]> Signed-off-by: Marco Felsch <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
- Loading branch information