Add u-blox Sara-N target.

TESTS/mbedmicro-rtos-mbed/threads/main.cpp

@@ -25,6 +25,8 @@
     #define STACK_SIZE 512
 #elif defined(TARGET_XDOT_L151CC)
     #define STACK_SIZE 1024
+#elif defined(TARGET_HI2110)
+    #define STACK_SIZE 512
 #else
     #define STACK_SIZE DEFAULT_STACK_SIZE
 #endif

targets/TARGET_ublox/TARGET_HI2110/PeripheralNames.h

@@ -0,0 +1,87 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2016 u-blox
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define STDIO_UART_TX     UART0_TX
+#define STDIO_UART_RX     UART0_RX
+
+typedef enum {
+    SERIAL_CONFIG_UARTLP_RX_UART0_TX,
+    SERIAL_CONFIG_UART0_RX_UART0_TX,
+    SERIAL_CONFIG_UART1_RX_UART1_TX,
+    MAX_NUM_SERIAL_CONFIGS
+} SerialConfig;
+
+typedef enum {
+    PIN_FUNCTION_UNCLAIMED = 0,
+    PIN_FUNCTION_GPIO = 1,
+    PIN_FUNCTION_PWM0 = 2,
+    PIN_FUNCTION_PWM0B = 3,
+    PIN_FUNCTION_PWM1 = 4,
+    PIN_FUNCTION_PWM1B = 5,
+    PIN_FUNCTION_SSP0TXD = 6,
+    PIN_FUNCTION_SSP0RXD = 7,
+    PIN_FUNCTION_SSP0TRX = 8,
+    PIN_FUNCTION_SSP0CLK = 9,
+    PIN_FUNCTION_SSP0FSS = 10,
+    PIN_FUNCTION_SSP1CLK = 11,
+    PIN_FUNCTION_SSP1FSS = 12,
+    PIN_FUNCTION_SSP1TXD = 13,
+    PIN_FUNCTION_SSP1RXD = 14,
+    PIN_FUNCTION_SSP1TRX = 15,
+    PIN_FUNCTION_I2C0 = 16,
+    PIN_FUNCTION_I2C1 = 17,
+    PIN_FUNCTION_UART0_TXD = 18,
+    PIN_FUNCTION_UART0_TXIR = 19,
+    PIN_FUNCTION_UART0_O2 = 20,
+    PIN_FUNCTION_UART0_O1 = 21,
+    PIN_FUNCTION_UART0_RTS = 22,
+    PIN_FUNCTION_UART0_DTR = 23,
+    PIN_FUNCTION_UART0_RXD = 24,
+    PIN_FUNCTION_UART0_RXIR = 25,
+    PIN_FUNCTION_UART0_CTS = 26,
+    PIN_FUNCTION_UART0_DCD = 27,
+    PIN_FUNCTION_UART0_DSR = 28,
+    PIN_FUNCTION_UART0_RI = 29,
+    PIN_FUNCTION_UART1_TXD = 30,
+    PIN_FUNCTION_UART1_TXIR = 31,
+    PIN_FUNCTION_UART1_O2 = 32,
+    PIN_FUNCTION_UART1_O1 = 33,
+    PIN_FUNCTION_UART1_RTS = 34,
+    PIN_FUNCTION_UART1_DTR = 35,
+    PIN_FUNCTION_UART1_RXD = 36,
+    PIN_FUNCTION_UART1_RXIR = 37,
+    PIN_FUNCTION_UART1_CTS = 38,
+    PIN_FUNCTION_UART1_DCD = 39,
+    PIN_FUNCTION_UART1_DSR = 40,
+    PIN_FUNCTION_UART1_RI = 41,
+    PIN_FUNCTION_LP_UART = 42,
+    PIN_FUNCTION_MAX_NUMBER
+} PinFunction;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

targets/TARGET_ublox/TARGET_HI2110/PortNames.h

@@ -0,0 +1,31 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2016 u-blox
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    Port0 = 0, //GPIO pins 0-19
+    PortMaxNumber
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif

targets/TARGET_ublox/TARGET_HI2110/TARGET_SARA_NBIOT/PinNames.h

@@ -0,0 +1,111 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+    p0  = 0,
+    p1  = 1,
+    p2  = 2,
+    p3  = 3,
+    p4  = 4,
+    p5  = 5,
+    p6  = 6,
+    p7  = 7,
+    p8  = 8,
+    p9  = 9,
+    p10 = 10,
+    p11 = 11,
+    p12 = 12,
+    p13 = 13,
+    p14 = 14,
+    p15 = 15,
+    p16 = 16,
+    p17 = 17,
+    p18 = 18,
+    p19 = 19,
+
+    UART0_RX = p13,
+    UART0_TX = p18,
+    UART0_CTS = p12,
+    UART0_RTS = p11,
+    I2C_SCL = p0,
+    I2C_SDA = p1,
+    SPI_CS = p2,
+    SPI_CLK = p3,
+    SPI_MOSI = p4,
+    SPI_MISO = p5,
+    UART1_RX = p7,
+    UART1_TX = p6,
+    LED1 = p2,
+    LED2 = p3,
+    LED3 = p4,
+    LED4 = p5,
+
+    // mBed interface Pins
+    USBTX = UART0_TX,
+    USBRX = UART0_RX,
+
+    P0_0 = p0,
+    P0_1 = p1,
+    P0_2 = p2,
+    P0_3 = p3,
+    P0_4 = p4,
+    P0_5 = p5,
+    P0_6 = p6,
+    P0_7 = p7,
+    P0_8 = p8,
+    P0_9 = p9,
+    P0_10 = p10,
+    P0_11 = p11,
+    P0_12 = p12,
+    P0_13 = p13,
+    P0_14 = p14,
+    P0_15 = p15,
+    P0_16 = p16,
+    P0_17 = p17,
+    P0_18 = p18,
+    P0_19 = p19,
+    NUM_PINS,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+    PullNone = 0,
+    PullDown = 1,
+    PullUp = 0xff,  /* TODO: current HI2110 chip does not have pull-up */
+    PullDefault = PullDown /* TODO: mbed requires PullUp as default but HI2110 doesn't have it */
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // MBED_PINNAMES_H

targets/TARGET_ublox/TARGET_HI2110/TARGET_SARA_NBIOT/device.h

@@ -0,0 +1,23 @@
+// The 'features' section in 'target.json' is now used to create the device's hardware preprocessor switches.
+// Check the 'features' section of the target description in 'targets.json' for more details.
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DEVICE_H
+#define MBED_DEVICE_H
+
+#include "objects.h"
+
+#endif

targets/TARGET_ublox/TARGET_HI2110/device/TOOLCHAIN_ARM_STD/hi2110.sct

@@ -0,0 +1,15 @@
+LR_IROM1 0x00000000 0x20000 {
+  ER_IROM1 0x00000000 0x20000  {
+   *.o (RESET, +First)
+   *(InRoot$$Sections)
+   .ANY (+RO)
+  }
+  RW_IRAM_VTABLE 0x01000000 EMPTY 128  {
+  }
+  RW_IRAM1 +0 (0x5000 - 256)  {
+   .ANY (+RW +ZI)
+  }
+  RW_IPCRAM +0 256 {
+   ipc.o (+RW)
+  }
+}