Update 5.10.x+fslc up to v5.10.32 #313

zandrey · 2021-04-22T08:38:39Z

Automatic merge performed, no conflicts reported.

Kernel has been built for both aarch64 (defconfig) and arm32 (imx_v6_v7_defconfig).

-- andrey

commit b166a20 upstream. If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock held and sp->do_auto_asconf is true, then an element is removed from the auto_asconf_splist without any proper locking. This can happen in the following functions: 1. In sctp_accept, if sctp_sock_migrate fails. 2. In inet_create or inet6_create, if there is a bpf program attached to BPF_CGROUP_INET_SOCK_CREATE which denies creation of the sctp socket. The bug is fixed by acquiring addr_wq_lock in sctp_destroy_sock instead of sctp_close. This addresses CVE-2021-23133. Reported-by: Or Cohen <[email protected]> Reviewed-by: Xin Long <[email protected]> Fixes: 6102365 ("bpf: Add new cgroup attach type to enable sock modifications") Signed-off-by: Or Cohen <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 2fb164f ] This fixes NAND_OP_WAITRDY_INSTR operation in the driver. Without this change the driver waits till the system is busy, but we should wait till the busy flag is cleared. The readl_poll_timeout() function gets a break condition, not a wait condition. In addition fix the timeout. The timeout_ms is given in ms, but the readl_poll_timeout() function takes the timeout in us. Multiple the given timeout by 1000 to convert it. Without this change, the driver does not work at all, it doesn't even identify the NAND chip. Fixes: 5197360 ("mtd: rawnand: mtk: Convert the driver to exec_op()") Signed-off-by: Hauke Mehrtens <[email protected]> Reviewed-by: Boris Brezillon <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 69d5ff3 ] The driver registers an interrupt handler in _probe, but didn't configure them until later when the _open function is called. In between, the keypad can fire an IRQ due to touchpad activity, which the handler ignores. This causes the kernel to disable the interrupt, blocking the keypad from working. Fix this by disabling interrupts before registering the handler. Additionally, disable them in _close, so that they're only enabled while open. Fixes: fc4f314 ("Input: add TI-Nspire keypad support") Signed-off-by: Fabian Vogt <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 23cf00d ] Do not allow exporting GPIOs which are set invalid by the driver's valid mask. Fixes: 726cb3b ("gpiolib: Support 'gpio-reserved-ranges' property") Signed-off-by: Matti Vaittinen <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit ea941ac ] Current code blindly writes over the SWERR and the OVERFLOW bits. Write back the bits actually read instead so the driver avoids clobbering the OVERFLOW bit that comes after the register is read. Fixes: bfe1d56 ("dmaengine: idxd: Init and probe for Intel data accelerators") Reported-by: Sanjay Kumar <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/161352082229.3511254.1002151220537623503.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4ac823e ] The delta_rec_size and crc_val in the completion record should be 32bits and not 16bits. Fixes: bfe1d56 ("dmaengine: idxd: Init and probe for Intel data accelerators") Reported-by: Nikhil Rao <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/161645618572.2003490.14466173451736323035.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit ea6a573 ] The operation capability register is 256bits. The current output only prints out the first 64bits. Fix to output the entire 256bits. The current code omits operation caps from IAX devices. Fixes: c52ca47 ("dmaengine: idxd: add configuration component of driver") Reported-by: Lucas Van <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/161645624963.2003736.829798666998490151.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 0fff71c ] WQ size can only be changed when the device is disabled. Current code allows change when device is enabled but wq is disabled. Change the check to detect device state. Fixes: c52ca47 ("dmaengine: idxd: add configuration component of driver") Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/161782558755.107710.18138252584838406025.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 88cd1d6 ] Some architectures do not provide devm_*() APIs. Hence make the driver dependent on HAVE_IOMEM. Fixes: dbde5c2 ("dw_dmac: use devm_* functions to simplify code") Reported-by: kernel test robot <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Acked-by: Viresh Kumar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit ea45b60 ] In the first list_for_each_entry() macro of dma_async_device_register, it gets the chan from list and calls __dma_async_device_channel_register (..,chan). We can see that chan->local is allocated by alloc_percpu() and it is freed chan->local by free_percpu(chan->local) when __dma_async_device_channel_register() failed. But after __dma_async_device_channel_register() failed, the caller will goto err_out and freed the chan->local in the second time by free_percpu(). The cause of this problem is forget to set chan->local to NULL when chan->local was freed in __dma_async_device_channel_register(). My patch sets chan->local to NULL when the callee failed to avoid double free. Fixes: d2fb0a0 ("dmaengine: break out channel registration") Signed-off-by: Lv Yunlong <[email protected]> Reviewed-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 07503e6 ] Add a missing put_device(&pdev->dev) if the call to dma_async_device_register(dma); fails. Fixes: 905ca51 ("dmaengine: plx-dma: Introduce PLX DMA engine PCI driver skeleton") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Logan Gunthorpe <[email protected]> Link: https://lore.kernel.org/r/YFnq/0IQzixtAbC1@mwanda Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit ea9aadc ] A pre-release silicon erratum workaround where wq reset does not clear WQCFG registers was leaked into upstream code. Use wq reset command instead of blasting the MMIO region. This also address an issue where we clobber registers in future devices. Fixes: da32b28 ("dmaengine: idxd: cleanup workqueue config after disabling") Reported-by: Shreenivaas Devarajan <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/161824330020.881560.16375921906426627033.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 6998a88 ] Commit 1a1c130 ("ACPI: tables: x86: Reserve memory occupied by ACPI tables") attempted to address an issue with reserving the memory occupied by ACPI tables, but it broke the initrd-based table override mechanism relied on by multiple users. To restore the initrd-based ACPI table override functionality, move the acpi_boot_table_init() invocation in setup_arch() on x86 after the acpi_table_upgrade() one. Fixes: 1a1c130 ("ACPI: tables: x86: Reserve memory occupied by ACPI tables") Reported-by: Hans de Goede <[email protected]> Tested-by: Hans de Goede <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 140a776 ] We have a duplicate legacy clock defined for sha2md5_fck that can sometimes race with clk_disable() with the dts configured clock for OMAP4_SHA2MD5_CLKCTRL when unused clocks are disabled during boot causing an "Unhandled fault: imprecise external abort". Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 77335a0 ] Fix moving mmc devices with dts aliases as discussed on the lists. Without this we now have internal eMMC mmc1 show up as mmc2 compared to the earlier order of devices. Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…gister non-static key" message [ Upstream commit 3a85969 ] Since this message is printed when dynamically allocated spinlocks (e.g. kzalloc()) are used without initialization (e.g. spin_lock_init()), suggest to developers to check whether initialization functions for objects were called, before making developers wonder what annotation is missing. [ mingo: Minor tweaks to the message. ] Signed-off-by: Tetsuo Handa <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 46e1521 ] The copy_to_user() function returns the number of bytes remaining to be copied, but we want to return -EFAULT if the copy doesn't complete. Signed-off-by: Wang Qing <[email protected]> Signed-off-by: Vineet Gupta <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 2800aad ] It's possible for iwl_pcie_enqueue_hcmd() to be called with hard IRQs disabled (e.g. from LED core). We can't enable BHs in such a situation. Turn the unconditional BH-enable/BH-disable code into hardirq-disable/conditional-enable. This fixes the warning below. WARNING: CPU: 1 PID: 1139 at kernel/softirq.c:178 __local_bh_enable_ip+0xa5/0xf0 CPU: 1 PID: 1139 Comm: NetworkManager Not tainted 5.12.0-rc1-00004-gb4ded168af79 Freescale#7 Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017 RIP: 0010:__local_bh_enable_ip+0xa5/0xf0 Code: f7 69 e8 ee 23 14 00 fb 66 0f 1f 44 00 00 65 8b 05 f0 f4 f7 69 85 c0 74 3f 48 83 c4 08 5b c3 65 8b 05 9b fe f7 69 85 c0 75 8e <0f> 0b eb 8a 48 89 3c 24 e8 4e 20 14 00 48 8b 3c 24 eb 91 e8 13 4e RSP: 0018:ffffafd580b13298 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000201 RCX: 0000000000000000 RDX: 0000000000000003 RSI: 0000000000000201 RDI: ffffffffc1272389 RBP: ffff96517ae4c018 R08: 0000000000000001 R09: 0000000000000000 R10: ffffafd580b13178 R11: 0000000000000001 R12: ffff96517b060000 R13: 0000000000000000 R14: ffffffff80000000 R15: 0000000000000001 FS: 00007fc604ebefc0(0000) GS:ffff965267480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fb3fef13b2 CR3: 0000000109112004 CR4: 00000000003706e0 Call Trace: ? _raw_spin_unlock_bh+0x1f/0x30 iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi] iwl_trans_txq_send_hcmd+0x6c/0x430 [iwlwifi] iwl_trans_send_cmd+0x88/0x170 [iwlwifi] ? lock_acquire+0x277/0x3d0 iwl_mvm_send_cmd+0x32/0x80 [iwlmvm] iwl_mvm_led_set+0xc2/0xe0 [iwlmvm] ? led_trigger_event+0x46/0x70 led_trigger_event+0x46/0x70 ieee80211_do_open+0x5c5/0xa20 [mac80211] ieee80211_open+0x67/0x90 [mac80211] __dev_open+0xd4/0x150 __dev_change_flags+0x19e/0x1f0 dev_change_flags+0x23/0x60 do_setlink+0x30d/0x1230 ? lock_is_held_type+0xb4/0x120 ? __nla_validate_parse.part.7+0x57/0xcb0 ? __lock_acquire+0x2e1/0x1a50 __rtnl_newlink+0x560/0x910 ? __lock_acquire+0x2e1/0x1a50 ? __lock_acquire+0x2e1/0x1a50 ? lock_acquire+0x277/0x3d0 ? sock_def_readable+0x5/0x290 ? lock_is_held_type+0xb4/0x120 ? find_held_lock+0x2d/0x90 ? sock_def_readable+0xb3/0x290 ? lock_release+0x166/0x2a0 ? lock_is_held_type+0x90/0x120 rtnl_newlink+0x47/0x70 rtnetlink_rcv_msg+0x25c/0x470 ? netlink_deliver_tap+0x97/0x3e0 ? validate_linkmsg+0x350/0x350 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1b2/0x280 netlink_sendmsg+0x336/0x450 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1ed/0x250 ? copy_msghdr_from_user+0x5c/0x90 ___sys_sendmsg+0x88/0xd0 ? lock_is_held_type+0xb4/0x120 ? find_held_lock+0x2d/0x90 ? lock_release+0x166/0x2a0 ? __fget_files+0xfe/0x1d0 ? __sys_sendmsg+0x5e/0xa0 __sys_sendmsg+0x5e/0xa0 ? lockdep_hardirqs_on_prepare+0xd9/0x170 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc605c9572d Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 da ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 2e ef ff ff 48 RSP: 002b:00007fffc83789f0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000055ef468570c0 RCX: 00007fc605c9572d RDX: 0000000000000000 RSI: 00007fffc8378a30 RDI: 000000000000000c RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 R13: 00007fffc8378b80 R14: 00007fffc8378b7c R15: 0000000000000000 irq event stamp: 170785 hardirqs last enabled at (170783): [<ffffffff9609a8c2>] __local_bh_enable_ip+0x82/0xf0 hardirqs last disabled at (170784): [<ffffffff96a8613d>] _raw_read_lock_irqsave+0x8d/0x90 softirqs last enabled at (170782): [<ffffffffc1272389>] iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi] softirqs last disabled at (170785): [<ffffffffc1271ec6>] iwl_pcie_enqueue_hcmd+0x116/0xa00 [iwlwifi] Signed-off-by: Jiri Kosina <[email protected]> Tested-by: Sedat Dilek <[email protected]> # LLVM/Clang v12.0.0-rc3 Acked-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 68dc022 ] BEET mode replaces the IP(6) Headers with new IP(6) Headers when sending packets. However, when it's a fragment before the replacement, currently kernel keeps the fragment flag and replace the address field then encaps it with ESP. It would cause in RX side the fragments to get reassembled before decapping with ESP, which is incorrect. In Xiumei's testing, these fragments went over an xfrm interface and got encapped with ESP in the device driver, and the traffic was broken. I don't have a good way to fix it, but only to warn this out in dmesg. Reported-by: Xiumei Mu <[email protected]> Signed-off-by: Xin Long <[email protected]> Signed-off-by: Steffen Klassert <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit a23f909 ] 0x20FF(amp global enable) register was defined as non-volatile, but it is not. Overheating, overcurrent can cause amp shutdown in hardware. 'regmap_write' compare register readback value before writing to avoid same value writing. 'regmap_read' just read cache not actual hardware value for the non-volatile register. When amp is internally shutdown by some reason, next 'AMP ON' command can be ignored because regmap think amp is already ON. Signed-off-by: Ryan Lee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 3a27875 ] Amp requires 10 ~ 30ms for the power ON and OFF. Added 30ms delay for stability. Signed-off-by: Ryan Lee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 52762ef ] In function displback_changed, has the call chain displback_connect(front_info)->xen_drm_drv_init(front_info). We can see that drm_info is assigned to front_info->drm_info and drm_info is freed in fail branch in xen_drm_drv_init(). Later displback_disconnect(front_info) is called and it calls xen_drm_drv_fini(front_info) cause a use after free by drm_info = front_info->drm_info statement. My patch has done two things. First fixes the fail label which drm_info = kzalloc() failed and still free the drm_info. Second sets front_info->drm_info to NULL to avoid uaf. Signed-off-by: Lv Yunlong <[email protected]> Reviewed-by: Oleksandr Andrushchenko <[email protected]> Signed-off-by: Oleksandr Andrushchenko <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d47ec7a ] After a short network outage, the dst_entry is timed out and put in DST_OBSOLETE_DEAD. We are in this code because arp reply comes from this neighbour after network recovers. There is a potential race condition that dst_entry is still in DST_OBSOLETE_DEAD. With that, another neighbour lookup causes more harm than good. In best case all packets in arp_queue are lost. This is counterproductive to the original goal of finding a better path for those packets. I observed a worst case with 4.x kernel where a dst_entry in DST_OBSOLETE_DEAD state is associated with loopback net_device. It leads to an ethernet header with all zero addresses. A packet with all zero source MAC address is quite deadly with mac80211, ath9k and 802.11 block ack. It fails ieee80211_find_sta_by_ifaddr in ath9k (xmit.c). Ath9k flushes tx queue (ath_tx_complete_aggr). BAW (block ack window) is not updated. BAW logic is damaged and ath9k transmission is disabled. Signed-off-by: Tong Zhu <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 844b85d ] clang warns about an impossible condition when building with 32-bit phys_addr_t: arch/arm/mach-keystone/keystone.c:79:16: error: result of comparison of constant 51539607551 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare] mem_end > KEYSTONE_HIGH_PHYS_END) { ~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-keystone/keystone.c:78:16: error: result of comparison of constant 34359738368 with expression of type 'phys_addr_t' (aka 'unsigned int') is always true [-Werror,-Wtautological-constant-out-of-range-compare] if (mem_start < KEYSTONE_HIGH_PHYS_START || ~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~ Change the temporary variable to a fixed-size u64 to avoid the warning. Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Link: https://lore.kernel.org/r/[email protected]' Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 28399a5 ] The clang integrated assembler fails to build one file with a complex asm instruction: arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: error: invalid instruction, any one of the following would fix this: mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit ^ arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: note: instruction requires: armv6t2 mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit ^ arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: note: instruction requires: thumb2 mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit ^ The problem is that 'NR_IRQS_LEGACY' is not defined here. Apparently gas does not care because we first add and then subtract this number, leading to the immediate value to be the same regardless of the specific definition of NR_IRQS_LEGACY. Neither the way that 'gas' just silently builds this file, nor the way that clang IAS makes nonsensical suggestions for how to fix it is great. Fortunately there is an easy fix, which is to #include the header that contains the definition. Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Tony Lindgren <[email protected]> Link: https://lore.kernel.org/r/[email protected]' Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 9fbd308 ] They were reading a counter that was configured to ALWAYS_COUNT (ie. cycles that the GPU is doing something) rather than ALWAYS_ON. This isn't the thing that userspace is looking for. Signed-off-by: Rob Clark <[email protected]> Acked-by: Jordan Crouse <[email protected]> Message-Id: <[email protected]> Signed-off-by: Rob Clark <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit e7a48c7 ] When using the driver in I2S TDM mode, the fsl_esai_startup() function rewrites the number of slots previously set by the fsl_esai_set_dai_tdm_slot() function to 2. To fix this, let's use the saved slot count value or, if TDM is not used and the number of slots is not set, the driver will use the default value (2), which is set by fsl_esai_probe(). Signed-off-by: Alexander Shiyan <[email protected]> Acked-by: Nicolin Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 5cd0f6f ] rport_dev_loss_timedout() sets the rport state to SRP_PORT_LOST and the SCSI target state to SDEV_TRANSPORT_OFFLINE. If this races with srp_reconnect_work(), a warning is printed: Mar 27 18:48:07 ictm1604s01h4 kernel: dev_loss_tmo expired for SRP port-18:1 / host18. Mar 27 18:48:07 ictm1604s01h4 kernel: ------------[ cut here ]------------ Mar 27 18:48:07 ictm1604s01h4 kernel: scsi_internal_device_block(18:0:0:100) failed: ret = -22 Mar 27 18:48:07 ictm1604s01h4 kernel: Call Trace: Mar 27 18:48:07 ictm1604s01h4 kernel: ? scsi_target_unblock+0x50/0x50 [scsi_mod] Mar 27 18:48:07 ictm1604s01h4 kernel: starget_for_each_device+0x80/0xb0 [scsi_mod] Mar 27 18:48:07 ictm1604s01h4 kernel: target_block+0x24/0x30 [scsi_mod] Mar 27 18:48:07 ictm1604s01h4 kernel: device_for_each_child+0x57/0x90 Mar 27 18:48:07 ictm1604s01h4 kernel: srp_reconnect_rport+0xe4/0x230 [scsi_transport_srp] Mar 27 18:48:07 ictm1604s01h4 kernel: srp_reconnect_work+0x40/0xc0 [scsi_transport_srp] Avoid this by not trying to block targets for rports in SRP_PORT_LOST state. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Bart Van Assche <[email protected]> Signed-off-by: Martin Wilck <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 97195d3 ] Add this specific Samsung AX201 sku to driver so it can be detected and initialized successfully. Signed-off-by: Matt Chen <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210326125611.30b622037714.Id9fd709cf1c8261c097bbfd7453f6476077dcafc@changeid Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit fb3c5cd ] This patch stops dumping llsec keys for monitors which we don't support yet. Otherwise we will access llsec mib which isn't initialized for monitors. Signed-off-by: Alexander Aring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stefan Schmidt <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 1a73e42 upstream. Taking page refcount is not ideal and causes kernel panic sometimes. It's better to take tx_ctx lock for the complete skb transmit, to avoid page cleanup if ACK received in middle. Fixes: 5a4b9fe ("cxgb4/chcr: complete record tx handling") Signed-off-by: Vinay Kumar Yadav <[email protected]> Signed-off-by: Rohit Maheshwari <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit bc16efd upstream. When sge queue is full and chcr_ktls_xmit_wr_complete() returns failure, skb is not freed if it is not the last tls record in this skb, causes refcount never gets freed and tls_dev_del() never gets called on this connection. Fixes: 5a4b9fe ("cxgb4/chcr: complete record tx handling") Signed-off-by: Vinay Kumar Yadav <[email protected]> Signed-off-by: Rohit Maheshwari <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 21d8c25 upstream. HW doesn't need marking TCB closed. This TCB state change sometimes causes problem to the new connection which gets the same tid. Fixes: 34aba2c ("cxgb4/chcr : Register to tls add and del callback") Signed-off-by: Vinay Kumar Yadav <[email protected]> Signed-off-by: Rohit Maheshwari <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit e8a4155 upstream. snd_una update should not be done when the same skb is being sent out.chcr_short_record_handler() sends it again even though SND_UNA update is already sent for the skb in chcr_ktls_xmit(), which causes mismatch in un-acked TCP seq number, later causes problem in sending out complete record. Fixes: 429765a ("chcr: handle partial end part of a record") Signed-off-by: Vinay Kumar Yadav <[email protected]> Signed-off-by: Rohit Maheshwari <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 38ec494 upstream. After commit 0f6925b ("virtio_net: Do not pull payload in skb->head") Guenter Roeck reported one failure in his tests using sh architecture. After much debugging, we have been able to spot silent unaligned accesses in inet_gro_receive() The issue at hand is that upper networking stacks assume their header is word-aligned. Low level drivers are supposed to reserve NET_IP_ALIGN bytes before the Ethernet header to make that happen. This patch hardens skb_gro_reset_offset() to not allow frag0 fast-path if the fragment is not properly aligned. Some arches like x86, arm64 and powerpc do not care and define NET_IP_ALIGN as 0, this extra check will be a NOP for them. Note that if frag0 is not used, GRO will call pskb_may_pull() as many times as needed to pull network and transport headers. Fixes: 0f6925b ("virtio_net: Do not pull payload in skb->head") Fixes: 78a478d ("gro: Inline skb_gro_header and cache frag0 virtual address") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Guenter Roeck <[email protected]> Cc: Xuan Zhuo <[email protected]> Cc: "Michael S. Tsirkin" <[email protected]> Cc: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Tested-by: Guenter Roeck <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit a3efe3f ] Fix warning: no previous prototype for 'omap_init_time_of'. Fixes: e69b4e1 ("ARM: OMAP2+: Add omap_init_time_of()") Reported-by: kernel test robot <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…_range() [ Upstream commit 45c2f70 ] for_each_mem_range() uses a loop variable, yet looking into code it is not just iteration counter but more complex entity which encodes information about memblock. Thus condition i == 0 looks fragile. Indeed, it broke boot of R-class platforms since it never took i == 0 path (due to i was set to 1). Fix that with restoring original flag check. Fixes: b10d6bc ("arch, drivers: replace for_each_membock() with for_each_mem_range()") Signed-off-by: Vladimir Murzin <[email protected]> Acked-by: Mike Rapoport <[email protected]> Signed-off-by: Russell King <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 30e3b4f ] Since commit 30fdfb9 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()"), the PCI code will call the IRQ mapping function whenever a PCI driver is probed. If these are marked as __init, this causes an oops if a PCI driver is loaded or bound after the kernel has initialised. Fixes: 30fdfb9 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()") Signed-off-by: Russell King <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit fc85dc4 ] Fix uninitialized sr_inst. Fixes: fbfa463 ("ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data") Reported-by: kernel test robot <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 3dd4ce4 ] Commit 941432d ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card") enabled the card detect GPIO for the SOPine module, along the way with the Pine64-LTS, which share the same base .dtsi. However while both boards indeed have a working CD GPIO on PF6, the polarity is different: the SOPine modules uses a "push-pull" socket, which has an active-high switch, while the Pine64-LTS use the more traditional push-push socket and the common active-low switch. Fix the polarity in the sopine.dtsi, and overwrite it in the LTS board .dts, to make the SD card work again on systems using SOPine modules. Fixes: 941432d ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card") Reported-by: Ashley <[email protected]> Signed-off-by: Andre Przywara <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 7a2f6e6 ] Although every Beelink GS1 seems to have external 32768 Hz oscillator, it works only on one from four tested. There are more reports of RTC issues elsewhere, like Armbian forum. One Beelink GS1 owner read RTC osc status register on Android which shipped with the box. Reported value indicated problems with external oscillator. In order to fix RTC and related issues (HDMI-CEC and suspend/resume with Crust) on all boards, switch to internal oscillator. Fixes: 32507b8 ("arm64: dts: allwinner: h6: Move ext. oscillator to board DTs") Signed-off-by: Jernej Skrabec <[email protected]> Tested-by: Clément Péron <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 9601148 ] We forbid adding unknown scalars with mixed signed bounds due to the spectre v1 masking mitigation. Hence this also needs bypass_spec_v1 flag instead of allow_ptr_leaks. Fixes: 2c78ee8 ("bpf: Implement CAP_BPF") Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: John Fastabend <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 8e53324 ] Convert vcpu_vmx.exit_reason from a u32 to a union (of size u32). The full VM_EXIT_REASON field is comprised of a 16-bit basic exit reason in bits 15:0, and single-bit modifiers in bits 31:16. Historically, KVM has only had to worry about handling the "failed VM-Entry" modifier, which could only be set in very specific flows and required dedicated handling. I.e. manually stripping the FAILED_VMENTRY bit was a somewhat viable approach. But even with only a single bit to worry about, KVM has had several bugs related to comparing a basic exit reason against the full exit reason store in vcpu_vmx. Upcoming Intel features, e.g. SGX, will add new modifier bits that can be set on more or less any VM-Exit, as opposed to the significantly more restricted FAILED_VMENTRY, i.e. correctly handling everything in one-off flows isn't scalable. Tracking exit reason in a union forces code to explicitly choose between consuming the full exit reason and the basic exit, and is a convenient way to document and access the modifiers. No functional change intended. Cc: Xiaoyao Li <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Chenyi Qiang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 04c4f2e ] __vmx_handle_exit() uses vcpu->run->internal.ndata as an index for an array access. Since vcpu->run is (can be) mapped to a user address space with a writer permission, the 'ndata' could be updated by the user process at anytime (the user process can set it to outside the bounds of the array). So, it is not safe that __vmx_handle_exit() uses the 'ndata' that way. Fixes: 1aa561b ("kvm: x86: Add "last CPU" to some KVM_EXIT information") Signed-off-by: Reiji Watanabe <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Message-Id: <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…mode [ Upstream commit 5e00e16 ] So far we don't increase the max read request size if we switch to jumbo mode before bringing up the interface for the first time. Let's change this. Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 453a778 ] It has been reported [0] that using pause frames in jumbo mode impacts performance. There's no available chip documentation, but vendor drivers r8168 and r8125 don't advertise pause in jumbo mode. So let's do the same, according to Roman it fixes the issue. [0] https://bugzilla.kernel.org/show_bug.cgi?id=212617 Fixes: 9cf9b84 ("r8169: make use of phy_set_asym_pause") Reported-by: Roman Mamedov <[email protected]> Tested-by: Roman Mamedov <[email protected]> Signed-off-by: Heiner Kallweit <[email protected]> Cc: [email protected] Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 24c109b ] The mixed signed bounds check really belongs into retrieve_ptr_limit() instead of outside of it in adjust_ptr_min_max_vals(). The reason is that this check is not tied to PTR_TO_MAP_VALUE only, but to all pointer types that we handle in retrieve_ptr_limit() and given errors from the latter propagate back to adjust_ptr_min_max_vals() and lead to rejection of the program, it's a better place to reside to avoid anything slipping through for future types. The reason why we must reject such off_reg is that we otherwise would not be able to derive a mask, see details in 9d7ecee ("bpf: restrict unknown scalars of mixed signed bounds for unprivileged"). Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: John Fastabend <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 6f55b2f ] Small refactor to drag off_reg into sanitize_ptr_alu(), so we later on can use off_reg for generalizing some of the checks for all pointer types. Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: John Fastabend <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit d2f7eca upstream. Since uprobes is not supported for thumb, check that the thumb bit is not set when matching the uprobes instruction hooks. The Arm UDF instructions used for uprobes triggering (UPROBE_SWBP_ARM_INSN and UPROBE_SS_ARM_INSN) coincidentally share the same encoding as a pair of unallocated 32-bit thumb instructions (not UDF) when the condition code is 0b1111 (0xf). This in effect makes it possible to trigger the uprobes functionality from thumb, and at that using two unallocated instructions which are not permanently undefined. Signed-off-by: Fredrik Strupe <[email protected]> Cc: [email protected] Fixes: c7edc9e ("ARM: add uprobes support") Signed-off-by: Russell King <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 2decad9 upstream. The entry from EL0 code checks the TFSRE0_EL1 register for any asynchronous tag check faults in user space and sets the TIF_MTE_ASYNC_FAULT flag. This is not done atomically, potentially racing with another CPU calling set_tsk_thread_flag(). Replace the non-atomic ORR+STR with an STSET instruction. While STSET requires ARMv8.1 and an assembler that understands LSE atomics, the MTE feature is part of ARMv8.5 and already requires an updated assembler. Signed-off-by: Catalin Marinas <[email protected]> Fixes: 637ec83 ("arm64: mte: Handle synchronous and asynchronous tag check faults") Cc: <[email protected]> # 5.10.x Reported-by: Will Deacon <[email protected]> Cc: Will Deacon <[email protected]> Cc: Vincenzo Frascino <[email protected]> Cc: Mark Rutland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit b658bbb upstream. Small refactor with no semantic changes in order to consolidate the max ptr_limit boundary check. Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: John Fastabend <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit a6aaece upstream. Consolidate all error handling and provide more user-friendly error messages from sanitize_ptr_alu() and sanitize_val_alu(). Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: John Fastabend <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit f528819 upstream. Add a small sanitize_needed() helper function and move sanitize_val_alu() out of the main opcode switch. In upcoming work, we'll move sanitize_ptr_alu() as well out of its opcode switch so this helps to streamline both. Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: John Fastabend <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 1fe976d upstream. Since commit fee2d54 ("net: phy: marvell: mv88e6390 temperature sensor reading"), Linux reports the temperature of Topaz hwmon as constant -75°C. This is because switches from the Topaz family (88E6141 / 88E6341) have the address of the temperature sensor register different from Peridot. This address is instead compatible with 88E1510 PHYs, as was used for Topaz before the above mentioned commit. Create a new mapping table between switch family and PHY ID for families which don't have a model number. And define PHY IDs for Topaz and Peridot families. Create a new PHY ID and a new PHY driver for Topaz's internal PHY. The only difference from Peridot's PHY driver is the HWMON probing method. Prior this change Topaz's internal PHY is detected by kernel as: PHY [...] driver [Marvell 88E6390] (irq=63) And afterwards as: PHY [...] driver [Marvell 88E6341 Family] (irq=63) Signed-off-by: Pali Rohár <[email protected]> BugLink: globalscaletechnologies/linux#1 Fixes: fee2d54 ("net: phy: marvell: mv88e6390 temperature sensor reading") Reviewed-by: Marek Behún <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Tested-by: Fox Chen <[email protected]> Tested-By: Patrick McCormick <[email protected]> Tested-by: Salvatore Bonaccorso <[email protected]> Tested-by: Florian Fainelli <[email protected]> Tested-by: Pavel Machek (CIP) <[email protected]> Tested-by: Jason Self <[email protected]> Tested-by: Shuah Khan <[email protected]> Tested-by: Jon Hunter <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Tested-by: Sudip Mukherjee <[email protected]> Tested-by: Andrei Rabusov <[email protected]> Tested-by: Hulk Robot <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

This is the 5.10.32 stable release Signed-off-by: Andrey Zhizhikin <[email protected]>

…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 Freescale#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 Freescale#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 Freescale#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 Freescale#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 Freescale#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 Freescale#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 Freescale#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 Freescale#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 Freescale#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 Freescale#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 Freescale#325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit a51cd6b ] In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the generated insn reverses byte order for both high and low 32-bit words, resuling in an incorrect swap as indicated by the jit test: [ 9757.262607] test_bpf: #312 BSWAP 16: 0x0123456789abcdef -> 0xefcd jited:1 8 PASS [ 9757.264435] test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) [ 9757.266260] test_bpf: #314 BSWAP 64: 0x0123456789abcdef -> 0x67452301 jited:1 8 PASS [ 9757.268000] test_bpf: #315 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 jited:1 8 PASS [ 9757.269686] test_bpf: #316 BSWAP 16: 0xfedcba9876543210 -> 0x1032 jited:1 8 PASS [ 9757.271380] test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) [ 9757.273022] test_bpf: #318 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe jited:1 7 PASS [ 9757.274721] test_bpf: #319 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 jited:1 9 PASS Fix this by forcing 32bit variant of rev32. Fixes: 1104247 ("bpf, arm64: Support unconditional bswap") Signed-off-by: Artem Savkov <[email protected]> Tested-by: Puranjay Mohan <[email protected]> Acked-by: Puranjay Mohan <[email protected]> Acked-by: Xu Kuohai <[email protected]> Message-ID: <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Or Cohen and others added 30 commits April 21, 2021 13:00

vinaychelsio and others added 26 commits April 21, 2021 13:00

Merge tag 'v5.10.32' into 5.10.x+fslc

1ab532e

This is the 5.10.32 stable release Signed-off-by: Andrey Zhizhikin <[email protected]>

otavio merged commit 692b5e0 into Freescale:5.10.x+fslc Apr 22, 2021

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Update 5.10.x+fslc up to v5.10.32 #313

Update 5.10.x+fslc up to v5.10.32 #313

zandrey commented Apr 22, 2021

Update 5.10.x+fslc up to v5.10.32 #313

Update 5.10.x+fslc up to v5.10.32 #313

Conversation

zandrey commented Apr 22, 2021