Lerdge S,X,K Board Support #18302

xC0000005 · 2020-06-14T22:18:10Z

Requirements

Filling out this template is required. Pull Requests without a clear description may be closed at the maintainers' discretion.

Description

This provides the ability to build and run Marlin 2.0 on Lerdge X board. The firmware is automatically encrypted to support SD based update. LCD Support does not work yet (I do not know why - I've tried with @jmz52's PR and it doesn't initialize yet (probably something I configured wrong).

Benefits

If you were not me, running Marlin on Lerdge wasn't easy. Now anyone can do it.
Lerdge K and K-2 support will require a different variant but use the same encryption scripts.

Related Issues

#12624

Fix compilation errors for STM32F103 with HAL STM32

Add support for 320x240 TFT with touch screen TFT screen can be connected to 16-bit FSMC or dedicated SPI interface Low-level IO implemented for HAL STM32 only

…ch_screen

…into tft_and_touch_screen

…ch_screen

…into tft_and_touch_screen

Marlin/src/pins/stm32f4/pins_LERDGE_X.h

Evg33 · 2020-07-06T22:22:21Z

J.C. Nelson: Congrats ! :)

ellensp

This commit undid https://github.com/MarlinFirmware/Marlin/pull/18327/files This breaks USB_FLASH_DRIVE_SUPPORT on lpc1768/9
Need to rename USB_DEVICE_DESCRIPTOR back to USB_FD_DEVICE_DESCRIPTOR and USB_ENDPOINT_DESCRIPTOR to USB_FD_ENDPOINT_DESCRIPTOR and USB_CONFIGURATION_DESCRIPTOR to USB_FD_CONFIGURATION_DESCRIPTOR and USB_INTERFACE_DESCRIPTOR to USB_FD_INTERFACE_DESCRIPTOR

* TMCStepper 0.7.0 followup (MarlinFirmware#18388) * Improve U8G+SPI delay override (MarlinFirmware#18386) Co-authored-by: Scott Lahteine <[email protected]> * Better STM32 Tone timer int priority (MarlinFirmware#18385) * Fix 3-point middle point (MarlinFirmware#18383) * Fix LPC176x RGB NEOPIXEL startup (MarlinFirmware#18380) * Fix ExtUI automatic font scaling (MarlinFirmware#18377) * [cron] Bump distribution date (2020-06-23) * No 'probing failed' with retry (MarlinFirmware#18379) * Add SERIAL_FLOAT_PRECISION option (MarlinFirmware#18367) * Move tests up one level * Use libraries from the registry * Graphical LCD note * Update LPC176x platform version (MarlinFirmware#18392) * Add maintenance actions * [cron] Bump distribution date (2020-06-24) * General cleanup * Run close-stale once per day * Board-based ST7920 delays * TFT_LITTLE_VGL_UI followup (MarlinFirmware#18410) * Display PID Autotune status (MarlinFirmware#18408) * [cron] Bump distribution date (2020-06-25) * Use Preheat 1 as M303 default (MarlinFirmware#18407) * Fix issues with no hotend / bed / fan (MarlinFirmware#18395) * Fix material preset type * NO_LCD_REINIT for FSMC (or, no SD_DETECT_PIN) * Fix material preset editing * Clean up preheat edit items * [cron] Bump distribution date (2020-06-26) * Minor LCD cleanup, improvement * Fix typo in DWIN, preheat array * Update Italian language (MarlinFirmware#18414) * [samd51] Manifest assigned timers priority (MarlinFirmware#18402) * Update MKS Robin Nano auto-build env (MarlinFirmware#18417) * SAMD51 cleanup (MarlinFirmware#18419) * BTT SKR Pro runout pins (MarlinFirmware#18416) * Update Brazilian Portuguese language (MarlinFirmware#18411) * Fix Fan Speed menu items (MarlinFirmware#18400) * Patch some DGUS warnings * Allow larger ADC debounce Reference MarlinFirmware#17205 * [cron] Bump distribution date (2020-06-27) * [cron] Bump distribution date (2020-06-28) * Update language fonts * Tool Change Migration fixes and debugging (MarlinFirmware#18448) * ExtUI additions (MarlinFirmware#18447) Co-authored-by: Scott Lahteine <[email protected]> * Add Romanian language (MarlinFirmware#18455) Co-authored-by: cristyanul <[email protected]> * Fix "probing failed" false positives (MarlinFirmware#18435) * Adjustable delta_diagonal_rod_trim (MarlinFirmware#18423) * Russian, Ukranian for wide LCD (MarlinFirmware#18433) * Tweak pins formatting * Suppress unused var warning * ClosedLoop as singleton * [cron] Bump distribution date (2020-06-29) * MKS Robin Nano flash-based EEPROM (MarlinFirmware#18466) * Use "reset reason" defines (MarlinFirmware#18462) * [cron] Bump distribution date (2020-06-30) * [cron] Bump distribution date (2020-07-01) * Fix missing parenthesis (MarlinFirmware#18473) * Fix FYSETC CHEETAH V1.2 SD re-insert (MarlinFirmware#18474) Include this board with other Cheetah stepper reset. * Hide menu item with no fan (MarlinFirmware#18470) * Permit independent X2,Y2,Z2,Z3,Z4 endstop inverting (MarlinFirmware#18481) * Add TFT_LVGL_UI support (MarlinFirmware#18438) * Per-Hotend Default PIDs (MarlinFirmware#18483) * Enforce sensor range for temperature target (MarlinFirmware#18465) * Mitigate stepper timeout * Add CHAMBER PWM code * Structured thermistor tables * Fix reversed sensor ranges * Prevent temps outside sensor range * [cron] Bump distribution date (2020-07-02) * Tweak stepper shutdown test * Extend thermistor 1047 to 500°C * [cron] Bump distribution date (2020-07-03) * Keep filament runout pin for Creality Melzi (MarlinFirmware#18504) * Add FYSETC 2.42 inch OLED support (MarlinFirmware#18485) * Option to set manual Babystepping distance in mm (MarlinFirmware#18503) Co-authored-by: Scott Lahteine <[email protected]> * Clean up LCD Manual Move / UBL Mesh Edit (MarlinFirmware#18373) * FYSETC OLED followup (MarlinFirmware#18519) * Ensure Git applies Unix line-endings in tests (MarlinFirmware#18495) * Fix axis name in serial output (MarlinFirmware#18522) * Fix env:mks_robin_nano35 (MarlinFirmware#18516) * FIx Sanguino/1284p board_upload.maximum_size (MarlinFirmware#18502) * M150 I to set Neopixel by index (MarlinFirmware#18490) * [cron] Bump distribution date (2020-07-04) * PID Accelerated Edit (MarlinFirmware#18532) * [cron] Bump distribution date (2020-07-05) * Fix "'ubl' not declared" error (MarlinFirmware#18541) * Fix thermistors exist-for-reading tests (MarlinFirmware#18533) Co-authored-by: Scott Lahteine <[email protected]> * Fix "Probing mesh point" message Closes MarlinFirmware#17770 Co-Authored-By: Jan-Gerard van der Toorn <[email protected]> * Probing points followup (MarlinFirmware#18552) * Update actions on bugfix branch * Add CI for pushed commits (MarlinFirmware#18549) * Fix Neopixel set_color (MarlinFirmware#18544) * Fix stall sensitivity adjustment for FTDI screens (MarlinFirmware#18554) * Minor pins cleanup * Add comment to M412 * Reduce string duplication * STM32: No compile-time check for PWM_PIN (MarlinFirmware#18539) Co-authored-by: Scott Lahteine <[email protected]> * Filament Runout Inverting => State (MarlinFirmware#18537) Co-authored-by: Scott Lahteine <[email protected]> * Simplify home_z_safely, respect HOME_AFTER_DEACTIVATE * [cron] Bump distribution date (2020-07-06) * Filament state followup * Get SAMD51 CXX flags from script * Use Material Preset 1 for PID autotune (MarlinFirmware#18446) Co-authored-by: Scott Lahteine <[email protected]> * Fix broken POWER_LOSS_RECOVERY prompt (MarlinFirmware#18557) Co-authored-by: Scott Lahteine <[email protected]> * Add Lerdge S,X,K (MarlinFirmware#18302) * Fix TMC homing phase coils alignment (MarlinFirmware#18528) Co-authored-by: Fabio Santos <[email protected]> * Scale runout distance setting for editable range (MarlinFirmware#18567) * 0.7.1 <= TMCStepper <= 0.7.9 (MarlinFirmware#18564) * Reduce 'first loop' temperature residency time (MarlinFirmware#18421) Co-authored-by: Scott Lahteine <[email protected]> * Update and fix POWER_MONITOR (MarlinFirmware#18561) * [cron] Bump distribution date (2020-07-07) * Temp Residency followup * Combine command macros * Whitespace cleanup * Fix typo in Configuration_adv.h (MarlinFirmware#18570) * [cron] Bump distribution date (2020-07-08) * SKR 1.4 alert for unsupported LCD * Tweak PLR debug * Fix warning with PIO * Update Chinese (zh_CN) language (MarlinFirmware#18580) * Show fixed V in Power Display with no V sensor (MarlinFirmware#18579) * Fix User Temp Sensor (1000), reversed Pt100 / Pt1000 (MarlinFirmware#18590) * Add `Cap:RUNOUT` Co-Authored-By: Julius ter Pelkwijk <[email protected]> * Fix some comments * [cron] Bump distribution date (2020-07-09) * Fix missing controller fan include * Consolidate probe clearance, add section debug (MarlinFirmware#18576) * Better section / function log * Add do_z_clearance motion function * Remove outdated comment (MarlinFirmware#18597) * Clean up some MMU comments * MarlinUI support for up to 5 Material Presets (MarlinFirmware#18488) - Add `I` preset parameter to `G26`, `M106`, `M140`, and `M190`. - Extend menu items to permit a string interpolation. - Keep material names in a list and interpolate in menu items. - Extend material presets to support up to 5 predefined materials. Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Jason Smith <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: MoellerDi <[email protected]> Co-authored-by: ellensp <[email protected]> Co-authored-by: RudolphRiedel <[email protected]> Co-authored-by: thinkyhead <[email protected]> Co-authored-by: Kirill Vergun <[email protected]> Co-authored-by: Fabio Santos <[email protected]> Co-authored-by: Chris Pepper <[email protected]> Co-authored-by: Victor <[email protected]> Co-authored-by: Pascal de Bruijn <[email protected]> Co-authored-by: Giuliano Zaro <[email protected]> Co-authored-by: Keith Bennett <[email protected]> Co-authored-by: Johnny Eshak <[email protected]> Co-authored-by: Lucas Seiki Oshiro <[email protected]> Co-authored-by: InsanityAutomation <[email protected]> Co-authored-by: cristyanul <[email protected]> Co-authored-by: JP Flouret <[email protected]> Co-authored-by: Serhiy-K <[email protected]> Co-authored-by: George Fu <[email protected]> Co-authored-by: Robby Candra <[email protected]> Co-authored-by: cbteeple <[email protected]> Co-authored-by: notabucketofspam <[email protected]> Co-authored-by: Jan-Gerard van der Toorn <[email protected]> Co-authored-by: Oliver Jean Eifler <[email protected]> Co-authored-by: ManuelMcLure <[email protected]> Co-authored-by: GhostlyCrowd <[email protected]> Co-authored-by: Luc Hoang Long <[email protected]> Co-authored-by: J.C. Nelson <[email protected]> Co-authored-by: shuttercat <[email protected]> Co-authored-by: espr14 <[email protected]> Co-authored-by: cccc <[email protected]> Co-authored-by: Julius ter Pelkwijk <[email protected]>

cjsoong · 2020-07-19T10:53:17Z

@xC0000005
PS_ON_PIN of LERDGE-X is not defined, so AUTO POWER OFF cannot be used. Will it be added later?

xC0000005 · 2020-07-19T20:12:08Z

For LerdgeX, I believe this is PC15. My Lerdge power module is somewhere between Taiwan and the US and has been for weeks, so I can’t actually test. It looks like the same pin is both power sense and auto-off (I’m not sure how this works) but you can try defining the pin to PC15 and see if it works. Once I have a module and can test I’ll sort it out.

…

On Jul 19, 2020, at 3:53 AM, cjsoong ***@***.***> wrote: @xC0000005 <https://github.com/xC0000005> PS_ON_PIN of LERDGE-X is not defined, so AUTO POWER OFF cannot be used. Will it be added later? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#18302 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AHVGS4I5H4ZVSOEOCY2OK5DR4LGCVANCNFSM4N5USQAA>.

* TMCStepper 0.7.0 followup (MarlinFirmware#18388) * Improve U8G+SPI delay override (MarlinFirmware#18386) Co-authored-by: Scott Lahteine <[email protected]> * Better STM32 Tone timer int priority (MarlinFirmware#18385) * Fix 3-point middle point (MarlinFirmware#18383) * Fix LPC176x RGB NEOPIXEL startup (MarlinFirmware#18380) * Fix ExtUI automatic font scaling (MarlinFirmware#18377) * [cron] Bump distribution date (2020-06-23) * No 'probing failed' with retry (MarlinFirmware#18379) * Add SERIAL_FLOAT_PRECISION option (MarlinFirmware#18367) * Move tests up one level * Use libraries from the registry * Graphical LCD note * Update LPC176x platform version (MarlinFirmware#18392) * Add maintenance actions * [cron] Bump distribution date (2020-06-24) * General cleanup * Run close-stale once per day * Board-based ST7920 delays * TFT_LITTLE_VGL_UI followup (MarlinFirmware#18410) * Display PID Autotune status (MarlinFirmware#18408) * [cron] Bump distribution date (2020-06-25) * Use Preheat 1 as M303 default (MarlinFirmware#18407) * Fix issues with no hotend / bed / fan (MarlinFirmware#18395) * Fix material preset type * NO_LCD_REINIT for FSMC (or, no SD_DETECT_PIN) * Fix material preset editing * Clean up preheat edit items * [cron] Bump distribution date (2020-06-26) * Minor LCD cleanup, improvement * Fix typo in DWIN, preheat array * Update Italian language (MarlinFirmware#18414) * [samd51] Manifest assigned timers priority (MarlinFirmware#18402) * Update MKS Robin Nano auto-build env (MarlinFirmware#18417) * SAMD51 cleanup (MarlinFirmware#18419) * BTT SKR Pro runout pins (MarlinFirmware#18416) * Update Brazilian Portuguese language (MarlinFirmware#18411) * Fix Fan Speed menu items (MarlinFirmware#18400) * Patch some DGUS warnings * Allow larger ADC debounce Reference MarlinFirmware#17205 * [cron] Bump distribution date (2020-06-27) * [cron] Bump distribution date (2020-06-28) * Update language fonts * Tool Change Migration fixes and debugging (MarlinFirmware#18448) * ExtUI additions (MarlinFirmware#18447) Co-authored-by: Scott Lahteine <[email protected]> * Add Romanian language (MarlinFirmware#18455) Co-authored-by: cristyanul <[email protected]> * Fix "probing failed" false positives (MarlinFirmware#18435) * Adjustable delta_diagonal_rod_trim (MarlinFirmware#18423) * Russian, Ukranian for wide LCD (MarlinFirmware#18433) * Tweak pins formatting * Suppress unused var warning * ClosedLoop as singleton * [cron] Bump distribution date (2020-06-29) * MKS Robin Nano flash-based EEPROM (MarlinFirmware#18466) * Use "reset reason" defines (MarlinFirmware#18462) * [cron] Bump distribution date (2020-06-30) * [cron] Bump distribution date (2020-07-01) * Fix missing parenthesis (MarlinFirmware#18473) * Fix FYSETC CHEETAH V1.2 SD re-insert (MarlinFirmware#18474) Include this board with other Cheetah stepper reset. * Hide menu item with no fan (MarlinFirmware#18470) * Permit independent X2,Y2,Z2,Z3,Z4 endstop inverting (MarlinFirmware#18481) * Add TFT_LVGL_UI support (MarlinFirmware#18438) * Per-Hotend Default PIDs (MarlinFirmware#18483) * Enforce sensor range for temperature target (MarlinFirmware#18465) * Mitigate stepper timeout * Add CHAMBER PWM code * Structured thermistor tables * Fix reversed sensor ranges * Prevent temps outside sensor range * [cron] Bump distribution date (2020-07-02) * Tweak stepper shutdown test * Extend thermistor 1047 to 500°C * [cron] Bump distribution date (2020-07-03) * Keep filament runout pin for Creality Melzi (MarlinFirmware#18504) * Add FYSETC 2.42 inch OLED support (MarlinFirmware#18485) * Option to set manual Babystepping distance in mm (MarlinFirmware#18503) Co-authored-by: Scott Lahteine <[email protected]> * Clean up LCD Manual Move / UBL Mesh Edit (MarlinFirmware#18373) * FYSETC OLED followup (MarlinFirmware#18519) * Ensure Git applies Unix line-endings in tests (MarlinFirmware#18495) * Fix axis name in serial output (MarlinFirmware#18522) * Fix env:mks_robin_nano35 (MarlinFirmware#18516) * FIx Sanguino/1284p board_upload.maximum_size (MarlinFirmware#18502) * M150 I to set Neopixel by index (MarlinFirmware#18490) * [cron] Bump distribution date (2020-07-04) * PID Accelerated Edit (MarlinFirmware#18532) * [cron] Bump distribution date (2020-07-05) * Fix "'ubl' not declared" error (MarlinFirmware#18541) * Fix thermistors exist-for-reading tests (MarlinFirmware#18533) Co-authored-by: Scott Lahteine <[email protected]> * Fix "Probing mesh point" message Closes MarlinFirmware#17770 Co-Authored-By: Jan-Gerard van der Toorn <[email protected]> * Probing points followup (MarlinFirmware#18552) * Update actions on bugfix branch * Add CI for pushed commits (MarlinFirmware#18549) * Fix Neopixel set_color (MarlinFirmware#18544) * Fix stall sensitivity adjustment for FTDI screens (MarlinFirmware#18554) * Minor pins cleanup * Add comment to M412 * Reduce string duplication * STM32: No compile-time check for PWM_PIN (MarlinFirmware#18539) Co-authored-by: Scott Lahteine <[email protected]> * Filament Runout Inverting => State (MarlinFirmware#18537) Co-authored-by: Scott Lahteine <[email protected]> * Simplify home_z_safely, respect HOME_AFTER_DEACTIVATE * [cron] Bump distribution date (2020-07-06) * Filament state followup * Get SAMD51 CXX flags from script * Use Material Preset 1 for PID autotune (MarlinFirmware#18446) Co-authored-by: Scott Lahteine <[email protected]> * Fix broken POWER_LOSS_RECOVERY prompt (MarlinFirmware#18557) Co-authored-by: Scott Lahteine <[email protected]> * Add Lerdge S,X,K (MarlinFirmware#18302) * Fix TMC homing phase coils alignment (MarlinFirmware#18528) Co-authored-by: Fabio Santos <[email protected]> * Scale runout distance setting for editable range (MarlinFirmware#18567) * 0.7.1 <= TMCStepper <= 0.7.9 (MarlinFirmware#18564) * Reduce 'first loop' temperature residency time (MarlinFirmware#18421) Co-authored-by: Scott Lahteine <[email protected]> * Update and fix POWER_MONITOR (MarlinFirmware#18561) * [cron] Bump distribution date (2020-07-07) * Temp Residency followup * Combine command macros * Whitespace cleanup * Fix typo in Configuration_adv.h (MarlinFirmware#18570) * [cron] Bump distribution date (2020-07-08) * SKR 1.4 alert for unsupported LCD * Tweak PLR debug * Fix warning with PIO * Update Chinese (zh_CN) language (MarlinFirmware#18580) * Show fixed V in Power Display with no V sensor (MarlinFirmware#18579) * Fix User Temp Sensor (1000), reversed Pt100 / Pt1000 (MarlinFirmware#18590) * Add `Cap:RUNOUT` Co-Authored-By: Julius ter Pelkwijk <[email protected]> * Fix some comments * [cron] Bump distribution date (2020-07-09) * Fix missing controller fan include * Consolidate probe clearance, add section debug (MarlinFirmware#18576) * Better section / function log * Add do_z_clearance motion function * Remove outdated comment (MarlinFirmware#18597) * Clean up some MMU comments * MarlinUI support for up to 5 Material Presets (MarlinFirmware#18488) - Add `I` preset parameter to `G26`, `M106`, `M140`, and `M190`. - Extend menu items to permit a string interpolation. - Keep material names in a list and interpolate in menu items. - Extend material presets to support up to 5 predefined materials. Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Jason Smith <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: MoellerDi <[email protected]> Co-authored-by: ellensp <[email protected]> Co-authored-by: RudolphRiedel <[email protected]> Co-authored-by: thinkyhead <[email protected]> Co-authored-by: Kirill Vergun <[email protected]> Co-authored-by: Fabio Santos <[email protected]> Co-authored-by: Chris Pepper <[email protected]> Co-authored-by: Victor <[email protected]> Co-authored-by: Pascal de Bruijn <[email protected]> Co-authored-by: Giuliano Zaro <[email protected]> Co-authored-by: Keith Bennett <[email protected]> Co-authored-by: Johnny Eshak <[email protected]> Co-authored-by: Lucas Seiki Oshiro <[email protected]> Co-authored-by: InsanityAutomation <[email protected]> Co-authored-by: cristyanul <[email protected]> Co-authored-by: JP Flouret <[email protected]> Co-authored-by: Serhiy-K <[email protected]> Co-authored-by: George Fu <[email protected]> Co-authored-by: Robby Candra <[email protected]> Co-authored-by: cbteeple <[email protected]> Co-authored-by: notabucketofspam <[email protected]> Co-authored-by: Jan-Gerard van der Toorn <[email protected]> Co-authored-by: Oliver Jean Eifler <[email protected]> Co-authored-by: ManuelMcLure <[email protected]> Co-authored-by: GhostlyCrowd <[email protected]> Co-authored-by: Luc Hoang Long <[email protected]> Co-authored-by: J.C. Nelson <[email protected]> Co-authored-by: shuttercat <[email protected]> Co-authored-by: espr14 <[email protected]> Co-authored-by: cccc <[email protected]> Co-authored-by: Julius ter Pelkwijk <[email protected]>

cjsoong · 2020-07-21T00:16:24Z

Pin_PC15 is used in E0_FAN on my machine, so PS_on_pin should have another pin define.

對於LerdgeX，我相信這是PC15。我的Lerdge電源模塊在台灣和美國之間，已經使用了數週，所以我無法進行實際測試。看起來同一引腳同時具有電源檢測和自動關閉功能（我不確定這是如何工作的），但是您可以嘗試將引腳定義為PC15並查看其是否有效。一旦有了模塊並可以測試，我將對其進行整理。
…
2020年7月19日凌晨3:53，cjsoong @.***>寫道： @ xC0000005 < https://github.com/xC0000005 > LERDGE-X的PS_ON_PIN未定義，因此無法使用自動關機。以後會添加嗎？—您收到此郵件是因為被提及。直接回复此電子郵件，在GitHub < ＃18302（評論） >上查看，或退訂< https://github.com/notifications/unsubscribe-auth/AHVGS4I5H4ZVSOEOCY2OK5DR4LGCVANCNFSM4N5USQAA >。

cjsoong · 2020-07-21T04:26:11Z

@xC0000005
The result of my test is that the ps_on_pin of Lerdge-x should be PC14.

xC0000005 · 2020-07-21T04:37:41Z

I will update this. Lerdge claims this works for both power off and power loss sense. Have you tested power loss sense?

…

On Jul 20, 2020, at 9:26 PM, cjsoong ***@***.***> wrote: @xC0000005 <https://github.com/xC0000005> The result of my test is that the ps_on_pin of Lerdge-x should be PC14. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#18302 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AHVGS4LGT7LWY6HKT23O73DR4UKHDANCNFSM4N5USQAA>.

* TMCStepper 0.7.0 followup (MarlinFirmware#18388) * Improve U8G+SPI delay override (MarlinFirmware#18386) Co-authored-by: Scott Lahteine <[email protected]> * Better STM32 Tone timer int priority (MarlinFirmware#18385) * Fix 3-point middle point (MarlinFirmware#18383) * Fix LPC176x RGB NEOPIXEL startup (MarlinFirmware#18380) * Fix ExtUI automatic font scaling (MarlinFirmware#18377) * [cron] Bump distribution date (2020-06-23) * No 'probing failed' with retry (MarlinFirmware#18379) * Add SERIAL_FLOAT_PRECISION option (MarlinFirmware#18367) * Move tests up one level * Use libraries from the registry * Graphical LCD note * Update LPC176x platform version (MarlinFirmware#18392) * Add maintenance actions * [cron] Bump distribution date (2020-06-24) * General cleanup * Run close-stale once per day * Board-based ST7920 delays * TFT_LITTLE_VGL_UI followup (MarlinFirmware#18410) * Display PID Autotune status (MarlinFirmware#18408) * [cron] Bump distribution date (2020-06-25) * Use Preheat 1 as M303 default (MarlinFirmware#18407) * Fix issues with no hotend / bed / fan (MarlinFirmware#18395) * Fix material preset type * NO_LCD_REINIT for FSMC (or, no SD_DETECT_PIN) * Fix material preset editing * Clean up preheat edit items * [cron] Bump distribution date (2020-06-26) * Minor LCD cleanup, improvement * Fix typo in DWIN, preheat array * Update Italian language (MarlinFirmware#18414) * [samd51] Manifest assigned timers priority (MarlinFirmware#18402) * Update MKS Robin Nano auto-build env (MarlinFirmware#18417) * SAMD51 cleanup (MarlinFirmware#18419) * BTT SKR Pro runout pins (MarlinFirmware#18416) * Update Brazilian Portuguese language (MarlinFirmware#18411) * Fix Fan Speed menu items (MarlinFirmware#18400) * Patch some DGUS warnings * Allow larger ADC debounce Reference MarlinFirmware#17205 * [cron] Bump distribution date (2020-06-27) * [cron] Bump distribution date (2020-06-28) * Update language fonts * Tool Change Migration fixes and debugging (MarlinFirmware#18448) * ExtUI additions (MarlinFirmware#18447) Co-authored-by: Scott Lahteine <[email protected]> * Add Romanian language (MarlinFirmware#18455) Co-authored-by: cristyanul <[email protected]> * Fix "probing failed" false positives (MarlinFirmware#18435) * Adjustable delta_diagonal_rod_trim (MarlinFirmware#18423) * Russian, Ukranian for wide LCD (MarlinFirmware#18433) * Tweak pins formatting * Suppress unused var warning * ClosedLoop as singleton * [cron] Bump distribution date (2020-06-29) * MKS Robin Nano flash-based EEPROM (MarlinFirmware#18466) * Use "reset reason" defines (MarlinFirmware#18462) * [cron] Bump distribution date (2020-06-30) * [cron] Bump distribution date (2020-07-01) * Fix missing parenthesis (MarlinFirmware#18473) * Fix FYSETC CHEETAH V1.2 SD re-insert (MarlinFirmware#18474) Include this board with other Cheetah stepper reset. * Hide menu item with no fan (MarlinFirmware#18470) * Permit independent X2,Y2,Z2,Z3,Z4 endstop inverting (MarlinFirmware#18481) * Add TFT_LVGL_UI support (MarlinFirmware#18438) * Per-Hotend Default PIDs (MarlinFirmware#18483) * Enforce sensor range for temperature target (MarlinFirmware#18465) * Mitigate stepper timeout * Add CHAMBER PWM code * Structured thermistor tables * Fix reversed sensor ranges * Prevent temps outside sensor range * [cron] Bump distribution date (2020-07-02) * Tweak stepper shutdown test * Extend thermistor 1047 to 500°C * [cron] Bump distribution date (2020-07-03) * Keep filament runout pin for Creality Melzi (MarlinFirmware#18504) * Add FYSETC 2.42 inch OLED support (MarlinFirmware#18485) * Option to set manual Babystepping distance in mm (MarlinFirmware#18503) Co-authored-by: Scott Lahteine <[email protected]> * Clean up LCD Manual Move / UBL Mesh Edit (MarlinFirmware#18373) * FYSETC OLED followup (MarlinFirmware#18519) * Ensure Git applies Unix line-endings in tests (MarlinFirmware#18495) * Fix axis name in serial output (MarlinFirmware#18522) * Fix env:mks_robin_nano35 (MarlinFirmware#18516) * FIx Sanguino/1284p board_upload.maximum_size (MarlinFirmware#18502) * M150 I to set Neopixel by index (MarlinFirmware#18490) * [cron] Bump distribution date (2020-07-04) * PID Accelerated Edit (MarlinFirmware#18532) * [cron] Bump distribution date (2020-07-05) * Fix "'ubl' not declared" error (MarlinFirmware#18541) * Fix thermistors exist-for-reading tests (MarlinFirmware#18533) Co-authored-by: Scott Lahteine <[email protected]> * Fix "Probing mesh point" message Closes MarlinFirmware#17770 Co-Authored-By: Jan-Gerard van der Toorn <[email protected]> * Probing points followup (MarlinFirmware#18552) * Update actions on bugfix branch * Add CI for pushed commits (MarlinFirmware#18549) * Fix Neopixel set_color (MarlinFirmware#18544) * Fix stall sensitivity adjustment for FTDI screens (MarlinFirmware#18554) * Minor pins cleanup * Add comment to M412 * Reduce string duplication * STM32: No compile-time check for PWM_PIN (MarlinFirmware#18539) Co-authored-by: Scott Lahteine <[email protected]> * Filament Runout Inverting => State (MarlinFirmware#18537) Co-authored-by: Scott Lahteine <[email protected]> * Simplify home_z_safely, respect HOME_AFTER_DEACTIVATE * [cron] Bump distribution date (2020-07-06) * Filament state followup * Get SAMD51 CXX flags from script * Use Material Preset 1 for PID autotune (MarlinFirmware#18446) Co-authored-by: Scott Lahteine <[email protected]> * Fix broken POWER_LOSS_RECOVERY prompt (MarlinFirmware#18557) Co-authored-by: Scott Lahteine <[email protected]> * Add Lerdge S,X,K (MarlinFirmware#18302) * Fix TMC homing phase coils alignment (MarlinFirmware#18528) Co-authored-by: Fabio Santos <[email protected]> * Scale runout distance setting for editable range (MarlinFirmware#18567) * 0.7.1 <= TMCStepper <= 0.7.9 (MarlinFirmware#18564) * Reduce 'first loop' temperature residency time (MarlinFirmware#18421) Co-authored-by: Scott Lahteine <[email protected]> * Update and fix POWER_MONITOR (MarlinFirmware#18561) * [cron] Bump distribution date (2020-07-07) * Temp Residency followup * Combine command macros * Whitespace cleanup * Fix typo in Configuration_adv.h (MarlinFirmware#18570) * [cron] Bump distribution date (2020-07-08) * SKR 1.4 alert for unsupported LCD * Tweak PLR debug * Fix warning with PIO * Update Chinese (zh_CN) language (MarlinFirmware#18580) * Show fixed V in Power Display with no V sensor (MarlinFirmware#18579) * Fix User Temp Sensor (1000), reversed Pt100 / Pt1000 (MarlinFirmware#18590) * Add `Cap:RUNOUT` Co-Authored-By: Julius ter Pelkwijk <[email protected]> * Fix some comments * [cron] Bump distribution date (2020-07-09) * Fix missing controller fan include * Consolidate probe clearance, add section debug (MarlinFirmware#18576) * Better section / function log * Add do_z_clearance motion function * Remove outdated comment (MarlinFirmware#18597) * Clean up some MMU comments * MarlinUI support for up to 5 Material Presets (MarlinFirmware#18488) - Add `I` preset parameter to `G26`, `M106`, `M140`, and `M190`. - Extend menu items to permit a string interpolation. - Keep material names in a list and interpolate in menu items. - Extend material presets to support up to 5 predefined materials. Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Jason Smith <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: MoellerDi <[email protected]> Co-authored-by: ellensp <[email protected]> Co-authored-by: RudolphRiedel <[email protected]> Co-authored-by: thinkyhead <[email protected]> Co-authored-by: Kirill Vergun <[email protected]> Co-authored-by: Fabio Santos <[email protected]> Co-authored-by: Chris Pepper <[email protected]> Co-authored-by: Victor <[email protected]> Co-authored-by: Pascal de Bruijn <[email protected]> Co-authored-by: Giuliano Zaro <[email protected]> Co-authored-by: Keith Bennett <[email protected]> Co-authored-by: Johnny Eshak <[email protected]> Co-authored-by: Lucas Seiki Oshiro <[email protected]> Co-authored-by: InsanityAutomation <[email protected]> Co-authored-by: cristyanul <[email protected]> Co-authored-by: JP Flouret <[email protected]> Co-authored-by: Serhiy-K <[email protected]> Co-authored-by: George Fu <[email protected]> Co-authored-by: Robby Candra <[email protected]> Co-authored-by: cbteeple <[email protected]> Co-authored-by: notabucketofspam <[email protected]> Co-authored-by: Jan-Gerard van der Toorn <[email protected]> Co-authored-by: Oliver Jean Eifler <[email protected]> Co-authored-by: ManuelMcLure <[email protected]> Co-authored-by: GhostlyCrowd <[email protected]> Co-authored-by: Luc Hoang Long <[email protected]> Co-authored-by: J.C. Nelson <[email protected]> Co-authored-by: shuttercat <[email protected]> Co-authored-by: espr14 <[email protected]> Co-authored-by: cccc <[email protected]> Co-authored-by: Julius ter Pelkwijk <[email protected]>

cjsoong · 2020-07-28T17:44:18Z

@xC0000005
The test has these problems:

Select the option that was not confirmed when printing the file.
LED PIN PC7 has no effect.
POWER LOSS PIN PC14 is unstable. Sometimes an outage message will appear when Power is off, but there is no printer recovery on power on.
The screen for enabling touch function will jump randomly.

jmz52 · 2020-07-28T18:32:15Z

@cjsoong
Please provide details for

Select the option that was not confirmed when printing the file.
The screen for enabling touch function will jump randomly.

cjsoong · 2020-07-29T02:10:29Z

@jmz52
There should be a confirmation option in some operations, but it does not appear, refer to the picture.
After enabling touch, the LCD menu is very unstable and will automatically jump to other options, and the number will automatically increase or decrease.

@cjsoong
Please provide details for

Select the option that was not confirmed when printing the file.

The screen for enabling touch function will jump randomly.

jmz52 · 2020-07-29T07:38:11Z

@cjsoong
Please provide link to where you downloaded code from.
Do you have rotary (optional) encoder? If you do, please check if menu operates correctly when using encoder with TOUCH_SCREEN option disabled.
Is Marlin responding to COM port when you have EEPROM init screen with no buttons?

* TMCStepper 0.7.0 followup (MarlinFirmware#18388) * Improve U8G+SPI delay override (MarlinFirmware#18386) Co-authored-by: Scott Lahteine <[email protected]> * Better STM32 Tone timer int priority (MarlinFirmware#18385) * Fix 3-point middle point (MarlinFirmware#18383) * Fix LPC176x RGB NEOPIXEL startup (MarlinFirmware#18380) * Fix ExtUI automatic font scaling (MarlinFirmware#18377) * [cron] Bump distribution date (2020-06-23) * No 'probing failed' with retry (MarlinFirmware#18379) * Add SERIAL_FLOAT_PRECISION option (MarlinFirmware#18367) * Move tests up one level * Use libraries from the registry * Graphical LCD note * Update LPC176x platform version (MarlinFirmware#18392) * Add maintenance actions * [cron] Bump distribution date (2020-06-24) * General cleanup * Run close-stale once per day * Board-based ST7920 delays * TFT_LITTLE_VGL_UI followup (MarlinFirmware#18410) * Display PID Autotune status (MarlinFirmware#18408) * [cron] Bump distribution date (2020-06-25) * Use Preheat 1 as M303 default (MarlinFirmware#18407) * Fix issues with no hotend / bed / fan (MarlinFirmware#18395) * Fix material preset type * NO_LCD_REINIT for FSMC (or, no SD_DETECT_PIN) * Fix material preset editing * Clean up preheat edit items * [cron] Bump distribution date (2020-06-26) * Minor LCD cleanup, improvement * Fix typo in DWIN, preheat array * Update Italian language (MarlinFirmware#18414) * [samd51] Manifest assigned timers priority (MarlinFirmware#18402) * Update MKS Robin Nano auto-build env (MarlinFirmware#18417) * SAMD51 cleanup (MarlinFirmware#18419) * BTT SKR Pro runout pins (MarlinFirmware#18416) * Update Brazilian Portuguese language (MarlinFirmware#18411) * Fix Fan Speed menu items (MarlinFirmware#18400) * Patch some DGUS warnings * Allow larger ADC debounce Reference MarlinFirmware#17205 * [cron] Bump distribution date (2020-06-27) * [cron] Bump distribution date (2020-06-28) * Update language fonts * Tool Change Migration fixes and debugging (MarlinFirmware#18448) * ExtUI additions (MarlinFirmware#18447) Co-authored-by: Scott Lahteine <[email protected]> * Add Romanian language (MarlinFirmware#18455) Co-authored-by: cristyanul <[email protected]> * Fix "probing failed" false positives (MarlinFirmware#18435) * Adjustable delta_diagonal_rod_trim (MarlinFirmware#18423) * Russian, Ukranian for wide LCD (MarlinFirmware#18433) * Tweak pins formatting * Suppress unused var warning * ClosedLoop as singleton * [cron] Bump distribution date (2020-06-29) * MKS Robin Nano flash-based EEPROM (MarlinFirmware#18466) * Use "reset reason" defines (MarlinFirmware#18462) * [cron] Bump distribution date (2020-06-30) * [cron] Bump distribution date (2020-07-01) * Fix missing parenthesis (MarlinFirmware#18473) * Fix FYSETC CHEETAH V1.2 SD re-insert (MarlinFirmware#18474) Include this board with other Cheetah stepper reset. * Hide menu item with no fan (MarlinFirmware#18470) * Permit independent X2,Y2,Z2,Z3,Z4 endstop inverting (MarlinFirmware#18481) * Add TFT_LVGL_UI support (MarlinFirmware#18438) * Per-Hotend Default PIDs (MarlinFirmware#18483) * Enforce sensor range for temperature target (MarlinFirmware#18465) * Mitigate stepper timeout * Add CHAMBER PWM code * Structured thermistor tables * Fix reversed sensor ranges * Prevent temps outside sensor range * [cron] Bump distribution date (2020-07-02) * Tweak stepper shutdown test * Extend thermistor 1047 to 500°C * [cron] Bump distribution date (2020-07-03) * Keep filament runout pin for Creality Melzi (MarlinFirmware#18504) * Add FYSETC 2.42 inch OLED support (MarlinFirmware#18485) * Option to set manual Babystepping distance in mm (MarlinFirmware#18503) Co-authored-by: Scott Lahteine <[email protected]> * Clean up LCD Manual Move / UBL Mesh Edit (MarlinFirmware#18373) * FYSETC OLED followup (MarlinFirmware#18519) * Ensure Git applies Unix line-endings in tests (MarlinFirmware#18495) * Fix axis name in serial output (MarlinFirmware#18522) * Fix env:mks_robin_nano35 (MarlinFirmware#18516) * FIx Sanguino/1284p board_upload.maximum_size (MarlinFirmware#18502) * M150 I to set Neopixel by index (MarlinFirmware#18490) * [cron] Bump distribution date (2020-07-04) * PID Accelerated Edit (MarlinFirmware#18532) * [cron] Bump distribution date (2020-07-05) * Fix "'ubl' not declared" error (MarlinFirmware#18541) * Fix thermistors exist-for-reading tests (MarlinFirmware#18533) Co-authored-by: Scott Lahteine <[email protected]> * Fix "Probing mesh point" message Closes MarlinFirmware#17770 Co-Authored-By: Jan-Gerard van der Toorn <[email protected]> * Probing points followup (MarlinFirmware#18552) * Update actions on bugfix branch * Add CI for pushed commits (MarlinFirmware#18549) * Fix Neopixel set_color (MarlinFirmware#18544) * Fix stall sensitivity adjustment for FTDI screens (MarlinFirmware#18554) * Minor pins cleanup * Add comment to M412 * Reduce string duplication * STM32: No compile-time check for PWM_PIN (MarlinFirmware#18539) Co-authored-by: Scott Lahteine <[email protected]> * Filament Runout Inverting => State (MarlinFirmware#18537) Co-authored-by: Scott Lahteine <[email protected]> * Simplify home_z_safely, respect HOME_AFTER_DEACTIVATE * [cron] Bump distribution date (2020-07-06) * Filament state followup * Get SAMD51 CXX flags from script * Use Material Preset 1 for PID autotune (MarlinFirmware#18446) Co-authored-by: Scott Lahteine <[email protected]> * Fix broken POWER_LOSS_RECOVERY prompt (MarlinFirmware#18557) Co-authored-by: Scott Lahteine <[email protected]> * Add Lerdge S,X,K (MarlinFirmware#18302) * Fix TMC homing phase coils alignment (MarlinFirmware#18528) Co-authored-by: Fabio Santos <[email protected]> * Scale runout distance setting for editable range (MarlinFirmware#18567) * 0.7.1 <= TMCStepper <= 0.7.9 (MarlinFirmware#18564) * Reduce 'first loop' temperature residency time (MarlinFirmware#18421) Co-authored-by: Scott Lahteine <[email protected]> * Update and fix POWER_MONITOR (MarlinFirmware#18561) * [cron] Bump distribution date (2020-07-07) * Temp Residency followup * Combine command macros * Whitespace cleanup * Fix typo in Configuration_adv.h (MarlinFirmware#18570) * [cron] Bump distribution date (2020-07-08) * SKR 1.4 alert for unsupported LCD * Tweak PLR debug * Fix warning with PIO * Update Chinese (zh_CN) language (MarlinFirmware#18580) * Show fixed V in Power Display with no V sensor (MarlinFirmware#18579) * Fix User Temp Sensor (1000), reversed Pt100 / Pt1000 (MarlinFirmware#18590) * Add `Cap:RUNOUT` Co-Authored-By: Julius ter Pelkwijk <[email protected]> * Fix some comments * [cron] Bump distribution date (2020-07-09) * Fix missing controller fan include * Consolidate probe clearance, add section debug (MarlinFirmware#18576) * Better section / function log * Add do_z_clearance motion function * Remove outdated comment (MarlinFirmware#18597) * Clean up some MMU comments * MarlinUI support for up to 5 Material Presets (MarlinFirmware#18488) - Add `I` preset parameter to `G26`, `M106`, `M140`, and `M190`. - Extend menu items to permit a string interpolation. - Keep material names in a list and interpolate in menu items. - Extend material presets to support up to 5 predefined materials. Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: Jason Smith <[email protected]> Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: MoellerDi <[email protected]> Co-authored-by: ellensp <[email protected]> Co-authored-by: RudolphRiedel <[email protected]> Co-authored-by: thinkyhead <[email protected]> Co-authored-by: Kirill Vergun <[email protected]> Co-authored-by: Fabio Santos <[email protected]> Co-authored-by: Chris Pepper <[email protected]> Co-authored-by: Victor <[email protected]> Co-authored-by: Pascal de Bruijn <[email protected]> Co-authored-by: Giuliano Zaro <[email protected]> Co-authored-by: Keith Bennett <[email protected]> Co-authored-by: Johnny Eshak <[email protected]> Co-authored-by: Lucas Seiki Oshiro <[email protected]> Co-authored-by: InsanityAutomation <[email protected]> Co-authored-by: cristyanul <[email protected]> Co-authored-by: JP Flouret <[email protected]> Co-authored-by: Serhiy-K <[email protected]> Co-authored-by: George Fu <[email protected]> Co-authored-by: Robby Candra <[email protected]> Co-authored-by: cbteeple <[email protected]> Co-authored-by: notabucketofspam <[email protected]> Co-authored-by: Jan-Gerard van der Toorn <[email protected]> Co-authored-by: Oliver Jean Eifler <[email protected]> Co-authored-by: ManuelMcLure <[email protected]> Co-authored-by: GhostlyCrowd <[email protected]> Co-authored-by: Luc Hoang Long <[email protected]> Co-authored-by: J.C. Nelson <[email protected]> Co-authored-by: shuttercat <[email protected]> Co-authored-by: espr14 <[email protected]> Co-authored-by: cccc <[email protected]> Co-authored-by: Julius ter Pelkwijk <[email protected]>

* Fix material preset type * Fix material preset editing * NO_LCD_REINIT for FSMC (or, no SD_DETECT_PIN) * Clean up preheat edit items * [cron] Bump distribution date (2020-06-26) * Minor LCD cleanup, improvement * Fix typo in DWIN, preheat array * Update Italian language (MarlinFirmware#18414) * [samd51] Manifest assigned timers priority (MarlinFirmware#18402) * Update MKS Robin Nano auto-build env (MarlinFirmware#18417) * SAMD51 cleanup (MarlinFirmware#18419) * BTT SKR Pro runout pins (MarlinFirmware#18416) * Update Brazilian Portuguese language (MarlinFirmware#18411) * Fix Fan Speed menu items (MarlinFirmware#18400) * Patch some DGUS warnings * Allow larger ADC debounce Reference MarlinFirmware#17205 * [cron] Bump distribution date (2020-06-27) * [cron] Bump distribution date (2020-06-28) * Update language fonts * Tool Change Migration fixes and debugging (MarlinFirmware#18448) * ExtUI additions (MarlinFirmware#18447) Co-authored-by: Scott Lahteine <[email protected]> * Add Romanian language (MarlinFirmware#18455) Co-authored-by: cristyanul <[email protected]> * Fix "probing failed" false positives (MarlinFirmware#18435) * Adjustable delta_diagonal_rod_trim (MarlinFirmware#18423) * Russian, Ukranian for wide LCD (MarlinFirmware#18433) * Tweak pins formatting * Suppress unused var warning * ClosedLoop as singleton * [cron] Bump distribution date (2020-06-29) * MKS Robin Nano flash-based EEPROM (MarlinFirmware#18466) * Use "reset reason" defines (MarlinFirmware#18462) * [cron] Bump distribution date (2020-06-30) * [cron] Bump distribution date (2020-07-01) * Fix missing parenthesis (MarlinFirmware#18473) * Fix FYSETC CHEETAH V1.2 SD re-insert (MarlinFirmware#18474) Include this board with other Cheetah stepper reset. * Hide menu item with no fan (MarlinFirmware#18470) * Permit independent X2,Y2,Z2,Z3,Z4 endstop inverting (MarlinFirmware#18481) * Add TFT_LVGL_UI support (MarlinFirmware#18438) * Per-Hotend Default PIDs (MarlinFirmware#18483) * Enforce sensor range for temperature target (MarlinFirmware#18465) * Mitigate stepper timeout * Add CHAMBER PWM code * Structured thermistor tables * Fix reversed sensor ranges * Prevent temps outside sensor range * [cron] Bump distribution date (2020-07-02) * Tweak stepper shutdown test * Extend thermistor 1047 to 500°C * Updated lock / unlock actions * [cron] Bump distribution date (2020-07-03) * Keep filament runout pin for Creality Melzi (MarlinFirmware#18504) * Add FYSETC 2.42 inch OLED support (MarlinFirmware#18485) * Option to set manual Babystepping distance in mm (MarlinFirmware#18503) Co-authored-by: Scott Lahteine <[email protected]> * Clean up LCD Manual Move / UBL Mesh Edit (MarlinFirmware#18373) * FYSETC OLED followup (MarlinFirmware#18519) * Ensure Git applies Unix line-endings in tests (MarlinFirmware#18495) * Fix axis name in serial output (MarlinFirmware#18522) * Fix env:mks_robin_nano35 (MarlinFirmware#18516) * FIx Sanguino/1284p board_upload.maximum_size (MarlinFirmware#18502) * M150 I to set Neopixel by index (MarlinFirmware#18490) * [cron] Bump distribution date (2020-07-04) * PID Accelerated Edit (MarlinFirmware#18532) * Patch Bad PR action * Two lock-closed per day * [cron] Bump distribution date (2020-07-05) * Fix "'ubl' not declared" error (MarlinFirmware#18541) * Fix thermistors exist-for-reading tests (MarlinFirmware#18533) Co-authored-by: Scott Lahteine <[email protected]> * Fix "Probing mesh point" message Closes MarlinFirmware#17770 Co-Authored-By: Jan-Gerard van der Toorn <[email protected]> * Limit actions to main * Probing points followup (MarlinFirmware#18552) * Update actions on bugfix branch * Add CI for pushed commits Co-Authored-By: thisiskeithb <[email protected]> * Add CI for pushed commits (MarlinFirmware#18549) * Fix Neopixel set_color (MarlinFirmware#18544) * Fix stall sensitivity adjustment for FTDI screens (MarlinFirmware#18554) * Minor pins cleanup * Add comment to M412 * Reduce string duplication * STM32: No compile-time check for PWM_PIN (MarlinFirmware#18539) Co-authored-by: Scott Lahteine <[email protected]> * Filament Runout Inverting => State (MarlinFirmware#18537) Co-authored-by: Scott Lahteine <[email protected]> * Simplify home_z_safely, respect HOME_AFTER_DEACTIVATE * [cron] Bump distribution date (2020-07-06) * Temporarily use patched lock-threads * Filament state followup * Get SAMD51 CXX flags from script * Use Material Preset 1 for PID autotune (MarlinFirmware#18446) Co-authored-by: Scott Lahteine <[email protected]> * Fix broken POWER_LOSS_RECOVERY prompt (MarlinFirmware#18557) Co-authored-by: Scott Lahteine <[email protected]> * Add Lerdge S,X,K (MarlinFirmware#18302) * Fix TMC homing phase coils alignment (MarlinFirmware#18528) Co-authored-by: Fabio Santos <[email protected]> * Scale runout distance setting for editable range (MarlinFirmware#18567) * 0.7.1 <= TMCStepper <= 0.7.9 (MarlinFirmware#18564) * Reduce 'first loop' temperature residency time (MarlinFirmware#18421) Co-authored-by: Scott Lahteine <[email protected]> * Update and fix POWER_MONITOR (MarlinFirmware#18561) * [cron] Bump distribution date (2020-07-07) * Temp Residency followup * Whitespace cleanup * Combine command macros * Fix typo in Configuration_adv.h (MarlinFirmware#18570) * [cron] Bump distribution date (2020-07-08) * Tweak PLR debug * Fix warning with PIO * SKR 1.4 alert for unsupported LCD * Update Chinese (zh_CN) language (MarlinFirmware#18580) * Lock threads updated * Show fixed V in Power Display with no V sensor (MarlinFirmware#18579) * Fix User Temp Sensor (1000), reversed Pt100 / Pt1000 (MarlinFirmware#18590) * Fix some comments * Add `Cap:RUNOUT` Co-Authored-By: Julius ter Pelkwijk <[email protected]> * [cron] Bump distribution date (2020-07-09) * Fix missing controller fan include * 2.0.5.4 : Use ststm32 < 6.2 * Consolidate probe clearance, add section debug (MarlinFirmware#18576) * Better section / function log * Add do_z_clearance motion function * Remove outdated comment (MarlinFirmware#18597) * Clean up some MMU comments * MarlinUI support for up to 5 Material Presets (MarlinFirmware#18488) - Add `I` preset parameter to `G26`, `M106`, `M140`, and `M190`. - Extend menu items to permit a string interpolation. - Keep material names in a list and interpolate in menu items. - Extend material presets to support up to 5 predefined materials. Co-authored-by: Scott Lahteine <[email protected]> * "M122 I" to reinitialize TMC (MarlinFirmware#18571) * [cron] Bump distribution date (2020-07-10) * Add current offset for POWER_MONITOR sensor (MarlinFirmware#18600) * Fix CMSIS / USB-FD regression (MarlinFirmware#18602) * Fix Chitu V6 with LVGL UI (MarlinFirmware#18608) * Fix CHITU_F103 pio.board name (MarlinFirmware#18486) * Capitalize "G-code" * [cron] Bump distribution date (2020-07-11) * Option to assist thermocouple debug (MarlinFirmware#18621) * Fix pid_debug_flag * Specify supported library versions * [cron] Bump distribution date (2020-07-12) * Clarify MICROSTEP_MODES * Option for extra endstop check (MarlinFirmware#18424) * Fix G35 output formatting (MarlinFirmware#18631) * [cron] Bump distribution date (2020-07-13) * [email protected] for LPC * Creality V4 cleanup * [cron] Bump distribution date (2020-07-14) * Fix / improve menu items (MarlinFirmware#18644) * LPC fix NeoPixel fork * Fix leveling "Point n of 3" message (MarlinFirmware#18639) * Increase STM32F1 Servo Timer Interrupt Priority (MarlinFirmware#18637) * [cron] Bump distribution date (2020-07-15) * Specify ststm32 @ 6.1.x * Tool-change debug option * Add REPORT_FAN_CHANGE as an option * Clean up DWIN code * General cleanup * Fix some Power Loss Recovery behaviors (MarlinFirmware#18558) * PLR followup * Fix Hotend Idle Timeout trigger (MarlinFirmware#18657) * [cron] Bump distribution date (2020-07-16) * Fix SKR 1.4 LCD / ADC Keypad sanity-check (MarlinFirmware#18670) * Broadcast host actions Fixes MarlinFirmware#18565 * Sanity-check BABYSTEP_MULTIPLICATOR_* * [cron] Bump distribution date (2020-07-17) * Fix material_preset reference issue * Chopper Timing Preset for 24V 0.9° (MarlinFirmware#18662) * Fix passive Chamber Temp reading (MarlinFirmware#18674) * Fix check_hotends with > 1 hotend * Tweak and use SD_ORDER * ExtUI for Anycubic I3 Mega (MarlinFirmware#18655) * Support FT81050 with FYSETC F6 (MarlinFirmware#18678) Co-authored-by: Scott Lahteine <[email protected]> * Smaller SD EEPROM file on Ender 3 V2 * Use safe_delay for PSU_POWERUP_DELAY (MarlinFirmware#18680) Co-authored-by: Scott Lahteine <[email protected]> * Fix E3V2 M0/M1 and wait_for_user * [cron] Bump distribution date (2020-07-18) * Chitu V6 - Stepper Z2 pins (MarlinFirmware#18683) * Fix DGUS write variable endianness (MarlinFirmware#18689) * Trigorilla Pro board (MarlinFirmware#18692) * Prettier BLTouch menu items (MarlinFirmware#18682) * Return to Status on PID Autotune (MarlinFirmware#18695) * Misc formatting, cleanup * [cron] Bump distribution date (2020-07-19) * More customizable DGUSDisplay (MarlinFirmware#18700) * Fix encoder reverse, partial steps handling (MarlinFirmware#18694) * Update Chinese (cn) language (MarlinFirmware#18705) * Fix endian DGUS WriteVariable (MarlinFirmware#18703) * Fix BLTouch PWM reliability in HAL/STM32 (MarlinFirmware#18702) * [cron] Bump distribution date (2020-07-20) * SAMD51: More reliable Servo/BLTouch PWM (MarlinFirmware#18710) * Only download & compile required libraries (MarlinFirmware#18699) * Reduce Step Smoothing ceiling to 50% CPU usage (MarlinFirmware#18719) * Fix some LVGL warnings * Patch auto-deps for Windows CXX (MarlinFirmware#18721) * [cron] Bump distribution date (2020-07-21) * Matching mat.bed_temp condition * Ignore unused (but downloaded) libraries (MarlinFirmware#18728) * Use development version of PlatformIO (MarlinFirmware#18724) * Fix build for Windows path edge case * Filter some unused Marlin/src subfolders (MarlinFirmware#18729) * New DGUS UI var / definition syntax (MarlinFirmware#18718) * Optimize LCD, Wifi, etc. libraries (MarlinFirmware#18730) * Fix inline AnycubicSerial method * Anycubic followup * [cron] Bump distribution date (2020-07-22) * Fix Spanish preheat strings (MarlinFirmware#18743) * Explicit SdFat * Custom Nozzle Wipe (MarlinFirmware#18736) * [cron] Bump distribution date (2020-07-23) * Linear Advance: Only change E DIR when needed (MarlinFirmware#18744) * Fix links to secure sites (MarlinFirmware#18745) * Fast Filament Change temperature check (MarlinFirmware#18738) * General cleanup * [cron] Bump distribution date (2020-07-24) * Update FYSETC AIO II TMC UART pins (MarlinFirmware#18749) * Update links, README, contributing, etc. * Update links, README, contributing, etc. * ibid. * Add CONTROLLER_FAN_IGNORE_Z (MarlinFirmware#18735) * Simplify encoder handling (MarlinFirmware#18754) * Fix ESP3D_WIFISUPPORT ini typo * Apply lib_ignore from [features] (MarlinFirmware#18762) * Ender 3 V2 BL24C16 EEPROM support (MarlinFirmware#18758) * Filament Runout pin for Creality v4.2.2 board (MarlinFirmware#18763) * [cron] Bump distribution date (2020-07-25) * Ender 3 V2: Inject 'G28 O' before G29 (MarlinFirmware#18767) * Fix Lerdge variant script (MarlinFirmware#18771) * G425/G35 menu items; G425 pre- and post- scripts (MarlinFirmware#18737) * Robin nano V2, TFT LVGL UI parameters, and more (MarlinFirmware#18500) * Clean up after changes * Update (c) * Fix ui.external_control compile error (MarlinFirmware#18778) * [cron] Bump distribution date (2020-07-26) * Fix search for best compiler (MarlinFirmware#18779) * Close host's Filament Change dialog (MarlinFirmware#18785) * More folders only compiled when their feature is Enabled (MarlinFirmware#18780) Co-authored-by: Scott Lahteine <[email protected]> * Randomize firmware.bin, fix unflag * Fix MKS Robin Nano V2 build / upload (MarlinFirmware#18784) * Fix compile-time PWM_PIN (MarlinFirmware#18793) Co-authored-by: Scott Lahteine <[email protected]> * Prevent ESP3D_WIFISUPPORT with non-ESP32 board (MarlinFirmware#18792) * Add 0 to EXTRUDERS :[json] (MarlinFirmware#18786) * [cron] Bump distribution date (2020-07-27) * Config for Anycubic Mega TFT * Marlin Release 2.0.6 * [cron] Bump distribution date (2020-07-28) * Fix WiFi / ESP32 sanity check (MarlinFirmware#18808) * Fix garbled print_xyz output (MarlinFirmware#18810) * Fix DELTA + TMC sensorless homing + SPI endstops (MarlinFirmware#18811) * DISABLE_DEBUG required to free Robin nano Z_DIR_PIN (MarlinFirmware#18832) * Fix NEOPIXEL_LED compile w/out PRINTER_EVENT_LEDS (MarlinFirmware#18824) * Add TEMP_PROBE_PIN for Einsy Rambo (MarlinFirmware#18823) * Fix Cancel Objects index display (zero-based) (MarlinFirmware#18841) * Fix UNKNOWN_Z_NO_RAISE in G28 Bug introduced in 73fc077 * In G28 Z is sort-of known * Update include_tree * Add monitor_flags * Fix Duplicator i3 Plus pin diagram (MarlinFirmware#18862) * Fix FLYF407ZG pins (MarlinFirmware#18865) * Fix Spindle/Laser PWM DC (MarlinFirmware#18871) * No mks_robin extra_scripts in Trigorilla build (MarlinFirmware#18872) * Fix Z height after tool change (MarlinFirmware#18951) * Move Cancel Object menu, fix canceled item index (MarlinFirmware#18930) * Update Italian language (MarlinFirmware#18886) * Update Slovak language (MarlinFirmware#18884) * HW PWM sanity checks for SPINDLE_LASER_FREQUENCY (MarlinFirmware#18947) * Fix IS_PROBE_PIN macro (MarlinFirmware#19024) Co-authored-by: Scott Lahteine <[email protected]> Co-authored-by: thinkyhead <[email protected]> Co-authored-by: Giuliano Zaro <[email protected]> Co-authored-by: Keith Bennett <[email protected]> Co-authored-by: Johnny Eshak <[email protected]> Co-authored-by: Lucas Seiki Oshiro <[email protected]> Co-authored-by: Jason Smith <[email protected]> Co-authored-by: InsanityAutomation <[email protected]> Co-authored-by: cristyanul <[email protected]> Co-authored-by: JP Flouret <[email protected]> Co-authored-by: Fabio Santos <[email protected]> Co-authored-by: Serhiy-K <[email protected]> Co-authored-by: ellensp <[email protected]> Co-authored-by: George Fu <[email protected]> Co-authored-by: Robby Candra <[email protected]> Co-authored-by: Victor Oliveira <[email protected]> Co-authored-by: cbteeple <[email protected]> Co-authored-by: notabucketofspam <[email protected]> Co-authored-by: Jan-Gerard van der Toorn <[email protected]> Co-authored-by: Oliver Jean Eifler <[email protected]> Co-authored-by: ManuelMcLure <[email protected]> Co-authored-by: GhostlyCrowd <[email protected]> Co-authored-by: Luc Hoang Long <[email protected]> Co-authored-by: J.C. Nelson <[email protected]> Co-authored-by: shuttercat <[email protected]> Co-authored-by: espr14 <[email protected]> Co-authored-by: cccc <[email protected]> Co-authored-by: Julius ter Pelkwijk <[email protected]> Co-authored-by: Axel <[email protected]> Co-authored-by: Speaka <[email protected]> Co-authored-by: Chris Pepper <[email protected]> Co-authored-by: Leo <[email protected]> Co-authored-by: Evgeny Z <[email protected]> Co-authored-by: Sergey1560 <[email protected]> Co-authored-by: JBA <[email protected]> Co-authored-by: Markus Towara <[email protected]> Co-authored-by: yufanyufan <[email protected]> Co-authored-by: Claus Näveke <[email protected]> Co-authored-by: cr20-123 <[email protected]> Co-authored-by: Pascal de Bruijn <[email protected]> Co-authored-by: Mark Langezaal <[email protected]> Co-authored-by: Ivan Kravets <[email protected]> Co-authored-by: Diego von Deschwanden <[email protected]> Co-authored-by: fleek <[email protected]> Co-authored-by: MKS-Sean <[email protected]> Co-authored-by: giryan <[email protected]> Co-authored-by: Victor Tseng <[email protected]> Co-authored-by: MoellerDi <[email protected]> Co-authored-by: natemason <[email protected]> Co-authored-by: swissnorp <[email protected]> Co-authored-by: Sebastien Andrivet <[email protected]> Co-authored-by: FLYmaker <[email protected]> Co-authored-by: Claus Näveke <[email protected]> Co-authored-by: cbaugher <[email protected]> Co-authored-by: Roman Moravčík <[email protected]> Co-authored-by: Julius Mumme <[email protected]>

jmz52 and others added 27 commits May 27, 2020 11:10

Pre-requisites for TFT and touch screen support

e3e6482

Fix compilation errors for STM32F103 with HAL STM32

Add support for TFT and touch screen

639b488

Add support for 320x240 TFT with touch screen TFT screen can be connected to 16-bit FSMC or dedicated SPI interface Low-level IO implemented for HAL STM32 only

Merge remote-tracking branch 'upstream/bugfix-2.0.x' into tft_and_tou…

dd5f13c

…ch_screen

Update Sd2Card_sdio_stm32duino.cpp

ab4ed92

Update tft_spi.cpp

3eada56

No wrapper on headers

afe667d

Update xpt2046.cpp

87c957f

No wrappers on headers

a604a04

Update (c), indentation

1badfff

Merge branch 'tft_and_touch_screen' of https://github.com/jmz52/Marlin …

3e25d86

…into tft_and_touch_screen

Fix FSMC initialization for STM32F103Vx MCUs

dd1aa9a

Add FSMC support for STM32F4xxVx and STM32F4xxZx MCUs

2d868a8

Improve TFT initialization

7180660

Update Conditionals_LCD.h

f0b03ac

Merge remote-tracking branch 'upstream/bugfix-2.0.x' into tft_and_tou…

a77b2dc

…ch_screen

Implement TFT UI for ADVANCED_PAUSE_FEATURE

17f4a31

Various style adjustments

e7f1b50

…etc…

fa47c57

Update tft_fsmc.cpp

fe80e23

Implement TFT UI for AUTO_BED_LEVELING_UBL

ca1b9a9

Merge branch 'tft_and_touch_screen' of https://github.com/jmz52/Marlin …

a7ce846

…into tft_and_touch_screen

STM32 bootloader and MKS encryption scripts

2a9fe2e

Fix compilation errors

df569e8

Basic Lerdge X Support.

b3ff8ef

apply formatting

d325d2b

env:LERDGEX inherits from common_stm32

2a832dd

Add CI test

8cfffa4

thinkyhead reviewed Jun 16, 2020

View reviewed changes

Marlin/src/pins/stm32f4/pins_LERDGE_X.h Show resolved Hide resolved

Fix pin names

daaf0c1

thinkyhead added the C: Boards/Pins label Jun 16, 2020

thinkyhead added 2 commits July 6, 2020 16:54

Update pins_LERDGE_X.h

8931769

Simpler print

3709bc2

thinkyhead merged commit 6f14d2d into MarlinFirmware:bugfix-2.0.x Jul 6, 2020

Evg33 mentioned this pull request Jul 9, 2020

[BUG] (bugfix 2.0.x LPC1769 USB_FLASH_DRIVE_SUPPORT compilation error) #18313

Closed

ellensp reviewed Jul 9, 2020

View reviewed changes

ellensp mentioned this pull request Jul 9, 2020

Solves: #18313 again! Fix CMSIS / USB-FD name conflicts #18602

Merged

jmp0x0000 pushed a commit to jmp0x0000/Marlin that referenced this pull request Aug 7, 2020

Add Lerdge S,X,K (MarlinFirmware#18302)

ff44767

nikdfzz approved these changes May 5, 2021

View reviewed changes

Sineos mentioned this pull request Jan 13, 2022

Klipper support Lerdge K Board Support ? Klipper3d/klipper#5147

Closed

xC0000005 deleted the LerdgeXBasicSupport branch October 4, 2022 16:46

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Lerdge S,X,K Board Support #18302

Lerdge S,X,K Board Support #18302

xC0000005 commented Jun 14, 2020

Evg33 commented Jul 6, 2020

ellensp left a comment •

edited

Loading

cjsoong commented Jul 19, 2020

xC0000005 commented Jul 19, 2020 via email

cjsoong commented Jul 21, 2020

cjsoong commented Jul 21, 2020

xC0000005 commented Jul 21, 2020 via email

cjsoong commented Jul 28, 2020

jmz52 commented Jul 28, 2020

cjsoong commented Jul 29, 2020

jmz52 commented Jul 29, 2020

Lerdge S,X,K Board Support #18302

Lerdge S,X,K Board Support #18302

Conversation

xC0000005 commented Jun 14, 2020

Requirements

Description

Benefits

Related Issues

Evg33 commented Jul 6, 2020

ellensp left a comment • edited Loading

Choose a reason for hiding this comment

cjsoong commented Jul 19, 2020

xC0000005 commented Jul 19, 2020 via email

cjsoong commented Jul 21, 2020

cjsoong commented Jul 21, 2020

xC0000005 commented Jul 21, 2020 via email

cjsoong commented Jul 28, 2020

jmz52 commented Jul 28, 2020

cjsoong commented Jul 29, 2020

jmz52 commented Jul 29, 2020

ellensp left a comment •

edited

Loading