Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Upstream changes:
0.9995 2016-07-27T09:23:55Z
- Taught the `add` command not to ignore the `--change` option.
- The `add` command now emits a usage statement when no change name is
passed to it.
- The `add` command now helpfully suggests using the --change option when
attempting to add a change with the same name as a target. Thanks to
Ivan Nunes for the report!
- The `tag` command now helpfully suggests using the --tag option when
attempting to add a tag with the same name as a target.
- Added `--global` as an alias for `--user` to the `config` command. This
alias benefits the muscle memory of Git users.
- Added a note for Git users to the `sqitch-revert` documentation, to
head off potential confusion with `git revert`. Thanks to Eric
Br矇chemier for the "time travel" analogy and wording.
- Fixed an "uninitialized value" error when creating a registry database
on Windows. Thanks to Steven C. Buttgereit for the report (Issue #289).
- Fixed editor selection to prioritize the `core.editor` configuration
variable over the `$EDITOR` environment variable. The `$SQITCH_EDITOR`
environment variable still trumps all. Thanks to Jim Nasby for the pull
request (#296).
- Added detection of the `$VISUAL` environment variable to Editor
selection, prioritzed after the `core.editor` configuration variable
and before the `$EDITOR` environment variable. Thanks to Jim Nasby for
the pull request (#296).
- Updated the DateTime code to set the locale via `set_locale()` instead
of `set()`, as the latter may actually change the local time
unintentionally, and has been deprecated since DateTime v1.04. Thanks
to Dave Rolsky for the pull request (#304).
0.9994 2016-01-08T19:46:43Z
- Reduced minimum required MySQL engine from 5.1.0 to 5.0.0. Thanks to
@dgc-wh for testing it (Issue #251).
- Fixed floating-point rounding issue with SQLite registry versions on
Perls with 16-byte doubles. Thanks to H. Merijn Brand for the report
and testing.
- Fixed an error when adding an engine with the `engine` command. Thanks
to Victor Mours for the report and fix!
- Updated the Oracle engine to support Oracle Wallet connection strings,
where no username or host is in the connection URI. Thanks to Timothy
Procter for the patch!
- Improved the installer's selection of the prefix in which to install
`etc` files to better match the `--installdirs` option, which defaults
to the "site" directories. Thanks to @carragom for the pull request
(#265).
- Added missing dash to `-engine` in sample calls to `sqitch init` in the
tutorials. Thanks to Andrew Dunstan for the spot (Issue #268).
- Fixed broken Vertica documentation links.
- Attempting to revert a database with no associated registry no longer
reports the registry as version 0, but correctly reports that no
registry can be found. Thanks to Arnaldo Piccinelli for the spot (Issue
#271).
- Fixed the search for change IDs in engines to match the search for
changes. Specifically, change ID seaerch now properly handles the
offset characters `~` and `^`. This bug mainly affected the `verify`
command, but it's good to address the inconsistency, done mainly by
adding the `find_change_id` and `change_id_offset_from_id` methods to
complement the `find_change` and `change_offset_from_id` methods.
Thanks to Andrew Dunstan for the spot (Issue #272).
- Fixed the `flips` table example in the MySQL tutorial. It was
inappropriately copied from the PostgreSQL tutorial at some point.
Thanks to Jeff Carpenter for the spot (Issue #254)!
0.9993 2015-08-17T17:55:26Z
[Bug Fixes]
- Eliminated test failures due to warnings from DateTime::Locale when
`LC_TIME` is set to C.UTF-8. Thanks to Shantanu Bhadoria for the report
and Dave Rolsky for the workaround.
- Fixed an error checking the registry version when the local uses a
comma for decimal values. Thanks to Steffen M羹ller for the report
(Issue #234).
- Worked around an error setting the MySQL storage engine using versions
of DBI prior to 1.631. Thanks to melon-babak for the report!
- Fixed an error from the Oracle engine when deploying more than 1000
changes. Thanks to Timothy Procter and Minh Hoang for the report and
testing the fix.
- Fixed a bunch of typos in error messages, comments, and documentation.
Thanks to Dmitriy for the pull request!
- Fixed test failures due to new warnings from File::Path on Perl
5.23.1.
- On Firebird, Looking up a change and tag in the database (via the
`--onto` option to `rebase` or the `--to` option to `revert`, among
others) would sometimes return the incorrect change if the change has
been reworked two or more times. Was fixed for the other engines in
v0.9991.
- Fixed the `--all` option used to apply a command to all known targets
so that it loads only targets specified by the local configuration.
Otherwise, user and system configuration can get in the way when they
specify engines and targets not used by the current project.
[Improvements]
- Added support for the `--set` option when deploying to MySQL. Thanks to
Chris Bandy for figuring out how to do it!
- Added support for a "reworked directory". By default, reworked change
scripts live in the deploy, revert, and verify directories along with
all the other change scripts. But if that starts to get too messy, or
you simply don't want to see them, add a `reworked_dir` setting to the
core, engine, or target config and reworked scripts will be stored
there, instead. Also supported are `reworked_deploy_dir`,
`reworked_revert_dir`, and `reworked_verify_dir`.
- Added the `--dir` option to the `init`, `engine`, and `target`
commands.
- Copied the core configuration options (`--engine`, `--target`,
`--plan-file`, `--registry`, etc.) to the `init`, `engine`, and
`target` commands. This means that they can be specified after the
command, which is a bit more natural. It also means that the
`--registry` and `--client` options of the `target` are no longer
deprecated.
- The `init` command on longer writes out commented values for the
`deploy_dir`, `revert_dir`, or `verify_dir` settings. I think these
settings are not commonly used, and it would start to get crowded if we
also added their "reworked" variants, which will be used still less.
- Added the `alter` action to the `engine` and `target` commands to set
engine and target properties.
- Added support for setting reworked directories to the `engine` and
`target` commands.
- Reformatted the output of the `engine` and `target` command `show`
actions to include reworked directories, and to bit a bit less flat.
- Attempting to add or alter an engine with a target URI that connects to
a different engine now triggers an error. For example, you can't set
the target for engine `pg` to `db:sqlite:`.
- The `add` and `alter` actions of the `engine` and `target` commands
now create script directories if they don't already exist.
- The `add` action of the `engine` and `target` commands now creates a
plan file if one does not exist in the specified location for the
engine or target.
- Added the `deploy_dir`, `revert_dir`, and `verify_dir` methods to
App::Sqitch::Plan::Change. Each points to the proper directory for the
target depending on whether or not the change has been reworked.
- In the MySQL engine, the following URI query params will be converted
to options passed to the command-line client, if they're present:
* mysql_compression=1 => --compress
* mysql_ssl=1 => --ssl
* mysql_connect_timeout => --connect_timeout
* mysql_init_command => --init-command
* mysql_socket => --socket
* mysql_ssl_client_key => --ssl-key
* mysql_ssl_client_cert => --ssl-cert
* mysql_ssl_ca_file => --ssl-ca
* mysql_ssl_ca_path => --ssl-capath
* mysql_ssl_cipher => --ssl-cipher
[Documentation]
- Added the "Overworked" section to sqitch-configuration guide with an
example of how to move reworked change scripts into a `reworked_dir`.
[Deprecations]
- Deprecated the `set-*` actions in the `engine` and `target` commands in
favor of the new `alter` action.
- The core `--deployed-dir`, `--revert-dir`, and `--verify-dir` options
are deprecated in favor of the `--dir` option on the `init`, `engine`,
and `target` command.
0.9992 2015-05-20T23:51:41Z
- On PostgreSQL, Sqitch now sets the `client_encoding` parameter to
`UTF8` for its own connection to the database. This ensures that data
sent to and from the databse should always be properly encoded and
decoded. Users should still set the proper encodings for change scripts
as appropriate.
- Fixed test failures due to path differences on Windows.
- DateTime::TimeZone is now explicitly required in an attempt to head off
"Cannot determine local time zone" errors.
- Corrected some typos and thinkos in `sqitchtutorial-oracle`, thanks to
George Hartzell.
- Improved the script to upgrade an Oracle registry to v1.0 to support
versions prior to Oracle 12, thanks to Timothy Procter.
- Added missing closing parenthesis to the "Nothing to deploy" message.
Thanks to George Hartzell for the pull request (Issue #226).
- Replaced the unique constraint on the `script_hash` column in the
`changes` registry table with a unique constraint on `project` and
`script_hash`. This is to allow a deploy script to be used in more than
one project in a single database. This change increments the registry
version to v1.1. Thanks to Timothy Procter for the report.
- Updated the registry check constraints to have consistent names on the
engines that support them. This will make it easier to modify the
constraints in the future.
- Fixed precision issues with the registry version on MySQL and Firebird.
- Added comment to sqitch-passwords guide that MySQL::Config is required
to read passwords from the MySQL configuration files. Thanks to
Sterling Hanenkamp for the patch!
0.9991 2015-04-03T23:14:39Z
[Improvements]
- Reduced minimum required MySQL engine from 5.6.4 to 5.1.0. Versions
prior to 5.6.4 lose the following features:
* Versions earlier than 5.6.4 is fractional second precision on
registry `DATETIME` columns. Since the ordering of those timestamps
is so important to the functioning of Sqitch, it will sleep in 100 ms
increments between logging changes to the registry until the time has
ticked over to the next second. Naturally, reverts and deploys will
be a little slower on versions of MySQL before 5.6.4, but accurate.
* Versions earlier than 5.5.0 lose the `checkit()` functions, which
would otherwise be used to emulate CHECK constraints in the registry,
as well as in user-created verify scripts, as recommended in the
MySQL tutorial, `sqitchtutorial-mysql`.
- Added a script to update the `DATETIME` columns in a MySQL Sqitch
registry that was upgraded to MySQL 5.6.4 or higher. It will be
installed as `tools/upgrade-registry-to-mysql-5.6.4.sql` in the
directory returned by `sqitch --etc`.
- Added a script to add the `checkit()` function and registry triggers to
emulate CHECK constraints to a MySQL Sqitch registry that was upgraded
to MySQL 5.5.0 or higher. It will be installed as
`tools/upgrade-registry-to-mysql-5.5.0.sql` in the directory returned
by `sqitch --etc`.
- The `init` command now throws an error when the plan file already
exists and is invalid or defined for a different project. Thanks to
Gabriel Potk獺ny for the suggestion (Issue #214).
- All commands that take target arguments can now specify them as engine
names or plan file paths as well as target names and URIs.
- Added the `--all` option and the `$command.all` configuration variable
to the `add`, `rework`, `tag`, and `bundle` commands. This option tells
the commands to do their thing for all plans known from the
configuration, not just the default plan.
- Pass engine, target, or plan file names to the `add`, `rework`, `tag`,
and `bundle` commands` commands to specify specify one or more targets,
engines, and plans to act on.
- Added the `--change` option to the `add`, `rework`, and `tag` commands
to distinguish the change to be added, reworked, or tagged from
plan-specifying arguments, if necessary.
- Added the `--tag` option to the `tag` command to distinguish the tag to
be added from plan-specifying arguments, if necessary.
- Changed the short variant of the `--conflicts` option to the `add` and
`rework` commands from `-c` to `-x`. The `-c` option is now used as the
short variant for `--change` (and `--conflicts` has almost certainly
never been used, anyway).
- Added the `engine` and `project` variables to the execution of script
templates by the `add` command. The default templates now use it to
make their first lines one of:
* -- Deploy [% project %]:[% change %] to [% engine]
* -- Revert [% project %]:[% change %] from [% engine]
* -- Verify [% project %]:[% change %] on [% engine]
[Bug Fixes]
- DateTime::TimeZone::Local::Win32 is now required on Windows.
- The MySQL engine no longer passes `--skip-pager` on Windows, since
it is not supported there. Thanks to Gabriel Potk獺ny for the report
(Issue #213).
- Fixed "no such table: changes" error when upgrading the SQLite
registry.
- Fixed upgrade failure on PostgreSQL 8.4. Thanks to Phillip Smith for
the report!
- Fixed an error when the `status` command `show_changes` and `show_tags`
configuration variables were set. Thanks to Adrian Klaver for the
report (Issue #219).
- Fixed `log` and `plan` usage statements to properly spell `--abbrev`.
Thanks to Adrian Klaver for the report (Issue #220).
- Fixed the formatting of change notes so that a space precedes the `#`
character whether the note was added by the `--note` option or via an
editor.
- Fixed a bug when parsing plan files with DOS/Windows line endings.
Thanks to Timothy Procter for the report (Issue #212).
- Looking up a change and tag in the database (via the `--onto` option to
`rebase` or the `--to` option to `revert`, among others) would
sometimes return the incorrect change if the change has been reworked
two or more times. Thanks to BryLo for the report!
[Documentation]
- Updated docs to be consistent in referring to the location of the system
configuration and template location as `$(prefix)/etc/sqitch`. Also
added notes pointing to the `--etc-dir` to find out exactly what that
resolves to. Suggested by Joseph Anthony Pasquale Holsten (Issue #167).
[Deprecations]
- Reverted deprecation of the database connection options. Target URIs
are still generally preferred, but sometimes you want to use a target
but just change the user name or database name. Retaining the options
is the easiest way to do this. Plus, a fair number of people have
scripts that use these options, and it seems petty to break them. Sorry
for the double-take here! The list of un-deprecated options is:
* `--db-client`
* `--db-host`
* `--db-port`
* `--db-username`
* `--db-password`
* `--db-name`
0.999 2015-02-12T19:43:45Z
- Improved MySQL missing table error detection by relying on error codes
instead of matching a (possibly localized) error string.
- Made the registry upgrade more transparent when deploying. Sqitch is
now is a little more vigilent in checking for things being out-of-date
and updating them.
- Fixed an issue where the `status` command would return an error when
run against a an older version of the registry.
- Fixed a Postgres test failure when DBD::Pg is installed but psql is not
in the path.
- Now require Config::GitLike 1.15 to build on Windows in order to avoid
test failures when Cwd::abs_path dies on non-existant paths.
- Clarified the behavior of each `deploy` reversion mode with regard to
deploy script vs. verify script failures, and with the expectation that
deploy scripts are atomic.
- Target passwords can now be set via a single environment variable,
`$SQITCH_PASSWORD`. Its value will override URI-specified password.
- Added the sqitch-passwords and sqitch-environment guides.
0.998 2015-01-15T22:17:44Z
- Fixed a bug in `sqitch engine update-config` where it would add data to
config files that did not previously have them, or report that data was
present in nonexistent config files.
- Added the `releases` table to the databases. This table will keep track
of releases of the Sqitch registry schema.
- The Oracle `registry` variable is now always `DEFINE`d when Oracle
scripts run.
- Added the `upgrade` command, which upgrades the schema for the Sqitch
registry for a target database.
- Added the `script_hash` column to the `changes` registry table. This
column contains a SHA-1 hash of the deploy script for the change at the
time it was deployed. For existing registries, the upgrade script sets
its value to be the same as the change ID. This value is update the
next time a project is deployed to the database.
- The error message when `deploy` cannot find the currently-deployed
change ID in the plan now includes more contextual information,
including the change name, associated tags, and the plan file name.
Suggested by Curtis Poe (Issue #205).
- Comments on Firebird registry objects are now created with the
`COMMENT` command, rather than INSERTs into catalog tables.
- Added support for "merge" events, though none are logged, yet.- Loading branch information