unrealircd can't launch on 14.1.x amd64 #226
Comments
|
Well, sounds like a problem with configuration. There are no mentions of "https://this.is.private.org/cgiirc.conf" in the source code or the default config files, so not really sure where that's coming from. |
|
Nevermind, I realized the vague log probably means that the SSL module failed to load because of the OpenSSL version mismatch, which is why the https resource failed to load. This is actually user inflicted. The unrealirc binary was of course built against the recent 1.0.1j OpenSSL version and that openssl package is available. All the user needs to do is to 'pkgin upgrade' their system to pick up the new OpenSSL package. |
jperkin
pushed a commit
that referenced
this issue
Jun 17, 2015
kramdown 1.7.0 released Published on Monday, 27 April 2015
This release brings among other things support for the ‘minted’ syntax
highlighter for LaTeX and a new math engine based on MathJax-Node that outputs
to MathML.
Changes
* 4 minor changes:
- The syntax highlighter ‘minted’ for the LaTeX converter is now available
(fixes issue #93, initial patch #242 by l3kn)
- A new math engine based on MathJax-Node that outputs to MathML is now
available (patch #240 by Tom Thorogood)
- Fixed #244, #246: Fenced code blocks now allow a dash in the code language
name (requested and patched by Dennis Günnewig)
- The option list in the man page as well in the output of kramdown --help
is now sorted.
* 2 bug fixes:
- Fixed #230: Warning message for method in
lib/kramdown/utils/configurable.rb will not show anymore (reported by
Robert A. Heiler)
- Fixed #239: Handling of single/double quotes in reference style links now
follows the same rules as with inline links (reported by Josh Davis)
kramdown 1.6.0 released Published on Saturday, 28 February 2015
This release contains many fixes and minor enhancements as well as one major
goodie that comes with a small caveat: block IALs can now be applied to link
and abbreviation definitions!
It may not sound like much but allowing block IALs to be applied to link
definitions alleviates the problem that additional attributes could only be
specified via span IALs. Now such attributes can be stored together with the
URL and title at the link definition, for example:
This is a ![resized image].
[resized image]: some_image.jpg "with a title"
{: height="36px" width="36px" style="border: 1px solid green"}
There is one small caveat, though. Regard the following construct:
[linkdef]: http://example.com
{:.block-ial}
block element, e.g. a paragraph
The block IAL would have been applied to the paragraph in previous versions
but now it is applied to the link definition. However, such a construct is not
very likely encountered in the real world.
Changes
* 7 minor changes:
- Block IALs can now be applied to link and abbreviation definitions
(inspired by issue #194 from cabo)
- The syntax highlighting engine for Rouge now allows custom formatter
classes to be used (issue #214, requested by BackOrder)
- The MathJax math engine now allows adding previews (issue #225, requested
by jethrogb)
- The “toc_levels” option can now also take a Range object (pull request
#210 by Jens Krämer)
- The generated table of contents of the HTML converter now contains ID
attributes on the links so that back-references can be used (issue #195,
requested by Ciro Santilli)
- A warning is now generated when duplicate HTML attributes are detected
(issue #201, requested by winniehell)
- Updated used version of prawn to 2.0.0
8 bug fixes:
- Fixed #192: Emphasis by using underscore sometimes wrongly worked within a
word (reported by Michael Franzl)
- Fixed #198: Empty alt attributes on <img> tags are now correctly handled
by the kramdown converter (reported by winniehell)
- Fixed #200: Trailing whitespace is now really removed in paragraphs
(reported by winniehell)
- Fixed #220: HTML blocks with attributes weren’t correctly detected when
directly after another block (reported by Bill Tozier)
- Fixed #199: Empty title attributes are now ignored for images when using
the kramdown converter (reported by and pull request #206 from winniehell)
- Leading and trailing white space from math statements is now stripped as
the whitespace sometimes lead to LaTeX conversion errors
- Fixed #226: Class names may now start with a dash in IALs/ALDs (reported
by Adam Hardwick)
- Multiple consecutive block IALs before an element are now correctly
processed
jperkin
pushed a commit
that referenced
this issue
Sep 6, 2015
pkgsrc changes: * Now liferea depends on www/webkit24-gtk3 (and x11/gtk3) * Update DESCR, MASTER_SITES, HOMEPAGE Changes: 2015-06-19 Lars Windolf <[email protected]> Version 1.10.16 * Fixes Github #180: Removing item from (v)folder marks all read (reported by GreenLunar) * Fixes Github #140, #158: Vertical pane placement is forgotten. (patch by foresto) * Fixes Github #182: Missing config.h include in date.c (reported by Paul Gevers) 2015-04-20 Lars Windolf <[email protected]> Version 1.10.15 * Fixes launching URLs in Firefox 36+ (reported by Geoffrey Leach) * Fixes Github #30: Segfault after updating from 1.8 to 1.10 (reported by vakuum) * Improves Github #36, #113: UI lock up during refresh (suggested by mozbugbox) * Fixes typo in Italian translation. 2015-02-26 Lars Windolf <[email protected]> Version 1.10.14 * Fixes Github #154: Crashes while starting (on corrupt icon) (reported by jcamposz) * Fixes Github #134: Broken default news feed. (reported by pvdl) * Fixes Github #122: Crashes at launch, "segmentation fault" (reported by geoffm) * Fixes some memory leaks (patch by Rich Coe) * Fixes Github #145: Wrong method triggered on 'Launch External' (patch by mozbugbox) * Fixes Github #149: Fixes a random crash on startup (patch by mozbugbox) * Fixes all issues reported by Coverity scan 2015-01-07 Lars Windolf <[email protected]> Version 1.10.13 * Fixes Github #112: Wrapping issue in folder display (reported by Jeff Fortin) * Fixes Github #114: Avoid termination on UTF-8 validation error * Fixes Github #132: Broken link in documentation (reported by kallus) 2014-10-14 Lars Windolf <[email protected]> Version 1.10.12 * Fixes Github #86: Support HTTP content negotiation (suggested by DanMan) * Fixes Github #98: Stop calling Atom person constructs w/ URI invalid (patch by Aristotle Pagaltzis) * Fixes Github #100: Problems with dark Adwaita theme in GTK 3.14 (reported by majutsushi) 2014-08-24 Lars Windolf <[email protected]> Version 1.10.11 * Fixes Github #53: Doesn't automatically update feed name and favicon for new feed (reported by asl97) * Fixes Github #67: Missing dist files for documentation (patch by Mikel Olasagasti) * Fixes Javascript links not opening in new browser tabs * Updated French translation (Guillaume Bernard) * Updated Hebrew translation (Genghis Khan) 2014-07-20 Lars Windolf <[email protected]> Version 1.10.10 * Fixes Github #26: RTL comments appear incorrectly (reported by yaronf) * Fixes Github #21: No notifications for Tiny Tiny RSS feeds (reported by simontunnat) 2014-04-21 Lars Windolf <[email protected]> Version 1.10.9 * Fixes Github #19: non void function should return value (reported by kwm81) * Fixes SF #1141: Liferea does not update feeds with TinyTinyRSS (reported by Dominik Grafenhofer, denk_mal, Fabian Henze) * Fixes SF #1150: subscription prop/source: not all fields and buttons visible (reported by David Smith) 2014-03-26 Lars Windolf <[email protected]> Version 1.10.8 * Fixes Github #13: Parsing errors not visible with dark themes (reported by Steve Kelly) * Fixes SF #1137, #1142: startup race with LifereaHtmlView (reported by Yanko Kaneti) 2014-03-17 Lars Windolf <[email protected]> Version 1.10.7 * Make Liferea use ETags and send If-None-Match (patch by Chris Siebenmann) 2014-02-24 Lars Windolf <[email protected]> Version 1.10.6 * Fixes SF #1135: liferea-add-feed doesn't process feed:https// (patch by Kevin Walke) * Fixes SF #1137: crash on startup in enclosure_list_view_load (reported in Redhat #1048499, Fedora #214888) 2014-01-15 Lars Windolf <[email protected]> Version 1.10.5 * Fixes #1056, #1089, #1098: Honor preferences when opening links (patch by Daniel Seither) * Fixes SF #1096: missing installation of liferea.convert file (reported by stqn) * Fixes Redhat #947358: popup notification only for new items (patch by Fabrice Bellet) 2014-01-13 Lars Windolf <[email protected]> Version 1.10.4 * Fixes SF #1123: Mistakenly claims "TinyTinyRSS source is not self-updating" (reported by Dominik Grafenhoher) * Fixes SF #1119: Crash on font resize at startup. (reported by David Smith) * Fixes #1117: Selecting last unread item in reduced feed list jumps to next feed (reported by Bruce Guenter) * Updated Arabic translation (Khaled Hosny) 2013-10-08 Lars Windolf <[email protected]> Version 1.10.3 * Asking for credentials again if TinyTinyRSS login fails * Asking for TinyTinyRSS credentials only 3 times * Checking wether TinyTinyRSS base URL is lost * Added warning on TinyTinyRSS login when source is not self-updating * "--debug-net --debug-verbose" now traces POST data * Patch #230 Add GNOME AppData XML (Mikel Olasagasti) * Updated Italian translation (Gianvito Cavasoli) * Updated Italian localized feed list (Gianvito Cavasoli) 2013-09-05 Lars Windolf <[email protected]> Version 1.10.2 * Patch SF #222: Make media player seekable (Simon Kågedal Reimer) * Fixes SF #1102: Spelling error in man page (David Smith) * Fixes SF #1104: liferea.desktop missing keywords (David Smith) * Fixes SF #1105: Start Minimized to Tray Does Not Work (reported by bitlord) * Fixes SF #1114: Crashes opening browser on item without link via popup (reported by Rich Coe, David Smith) * Improved handling of broken Atom author information. (Lars Windolf) * Removed dead Google Reader code to avoid doing requests to Google. Replaced with dummy source that even allows normal feed updates. (Lars Windolf) * Added hint to FAQ on how to workaround broken Flash support (Lars Windolf) * Dumping feedlist.opml with indentation for readability. (suggested by Christoph Temmel and Simon Kågedal Reimer) 2013-07-28 Lars Windolf <[email protected]> Version 1.10.1a * Fixes SF #1102: Liferea does not show a window (reported by genodeftest) 2013-07-28 Lars Windolf <[email protected]> Version 1.10.1 * Fixes SF #1059: Liferea crashes with system proxy enabled (reported by genodeftest) * Fixes SF #1095: Theme color detection bug / white fonts. (reported by David Smith and others) * Fixes SF #1097: Default feed refresh interval cannot be set to 0 (reported by stqn) * Fixes SF #1100: --debug-gui crashes with segmentation fault (reported by genodeftest) * Fixes SF #1101: Outdated manpage (reported by genodeftest) * Patch SF #225: Make media player work with GStreamer 1.0 (Simon Kågedal Reimer) * Patch SF #226: Add trailing semi-colon to MimeType so that the desktop file validates (Yanko Kaneti) * Patch SF #227: Remove letfover square bracket configure.ac (Yanko Kaneti) * Patch SF #228: Add net.sf.liferea.gschema.xml to AC_CONFIG_FILES (Yanko Kaneti) 2013-07-10 Lars Windolf <[email protected]> Version 1.10.0 * Added experimental sync support for TheOldReader (Lars Windolf) * Removed 'Update' link in comments display as it is pretty useless (Lars Windolf) * Removed 'No Comments' display as it is rather useless (Lars Windolf) * Prevent re-rendering item display on setting item flagged (Lars Windolf) * Changed unread number rendering to be right bound and non-ellipsized (Lars Windolf) * Fixes g_strstr_len assertions caused by search folder item matching (Rich Coe) * Updated documentation to reflect Google Reader, TheOldReader changes (Lars Windolf) * Removed welcome text, restoring last feed/item selection instead (Lars Windolf) * autogen.sh now reports errors on missing autoconf or intltool (suggested by Scott Kostyshak) * Correctly check for gobject-introspection build dependency (suggested by Scott Kostyshak) * Updated Basque translation (Mikel Olasagasti Uranga) * Updated Danish translation (Joe Hansen) * Updated Dutch translation (Erwin Poeze) * Updated Finnish translation (Jorma Karvonen) * Updated Russian translation (Leonid Selivanov) * Updated Ukrainian translation (Yuri Chornoivan) * Updated Vietnamese translation (Trần Ngọc Quân) * Updated German translation (Lars Windolf) 2013-05-22 Lars Windolf <[email protected]> Version 1.10-RC4 * Added an option to convert Google Reader subscriptions to local feeds (Lars Windolf) * Fixes SF #1080: segfault opening attachment due to incorrect g_free() (reported by Adam Nielsen) * Fixes SF #1075: GLib warnings of "string != NULL" assertion failure (reported by Simon Kågedal Reimer) * Fixes missing shading in 2-pane mode rendering (reported by Zoho Vignochi) * Fixes search folders including comment items (reported by David Willmore) 2013-05-22 Lars Windolf <[email protected]> Version 1.10-RC3 * Fixes SF #1069: broken rendering in tt-rss feeds (patch by Simon Kågedal Reimer) * Merged SF #219: View *.xml files along with *.opml files in file chooser (patch by Simon Kågedal Reimer) * Merged SF #233: Show feed name in item view when in merged views. (patch by Simon Kågedal Reimer) * Merged SF #193: Use GtkInfoBar for note in preferences window (patch by Fred Morcos) * Require intltool >= 0.40.4 (Adrian Bunk) * Updated Catalan translation (Gil Forcada) * Updated Danish translation (Joe Hansen) * Updated Polish translation (Piotr Sokół) 2013-05-12 Lars Windolf <[email protected]> Version 1.10-RC2 * Extended user agent by "AppleWebKit (KHTML, like Gecko)" to solve incorrect mobile redirect with zdf.de * Added social bookmarking support for Mister Wong * Added social bookmarking support for Google Bookmarks * Update of German FAQ * Update of English FAQ * Added MimeType to .desktop file (Craig Barnes) * Fixes SF #1063: Can't open preferences twice (Emilio Pozuelo Monfort, reported by David Smith) * Fixes SF #1040: In feed entries, spaces are replaced with "+" (reported by Emmanuel Seyman) * Fixes SF #1051: Issues in RTL GUI of Liferea (reported by phixy) * Fixes SF #1038, #1074: Updates ttrss feeds over and over (reported by many users) * Fix several memory leaks (Emilio Pozuelo Monfort) * Require glib >= 2.28 for GApplication (Adrian Bunk) * Use the GTK+ 3 version, not wrongly the GTK+ 2 version, of the libindicate GTK+ bindings (Adrian Bunk) * Updated the default feedlists (Adrian Bunk) * Removed support for libnotify < 0.7 (Adrian Bunk) * Added Vietnamese translation (Trần Ngọc Quân) * Updated Albanian translation (Besnik Bleta) * Updated Asturian translation (Iñigo Varela) * Updated Basque translation (Mikel Olasagasti Uranga) * Updated Danish translation (Joe Hansen) * Updated Finnish translation (Jorma Karvonen) * Updated German translation (Christian Stadelmann) * Updated Hungarian translation (Gabor Kelemen) * Updated Japanese translation (Takeshi Hamasaki) * Updated Latvian translation (Rihards Priedītis) * Updated Ukrainian translation (Yuri Chornoivan) 2013-01-30 Lars Windolf <[email protected]> Version 1.10-RC1 Please note that due to the SourceForge upgrade bug ticket numbering did change. This might be confusing... Old numbers are 7 figures, newer ones only 4! * Patch SF #3407290: Migrate to GSettings (by Mikel Olasagasti) * Patch SF #3579177: Change .desktop category to News;Feed; (by Stanislav Brabec) * Fix for Debian #668197: x-www-browser preference not working (David Smith) * Added slider and time display to media player plugin. * Added Google Plus to social bookmarking options. * Removing deprecated g_thread_init() call * Auto-enable plugins on migration * Added missing -a option to manpage * Updated manpage to reflect XDG path migration * Changing GSettings path from /apps/liferea to /org/gnome/liferea * Changes default download thread concurrency from 2 to 3 * Fixes regression about using the GNOME default font * Improves all item/link launching menus to consistently provide three options: Tab, Browser and External Browser * Fixes SF #1037: Incorrect notifications for Google Reader (patch by David Smith) * Fixes SF #1048: Removed all feedvalidator.org references from FAQ and XSLT as it was reported to host malware. (reported by bkat) * Fixes SF #1041: Some GPLv2 license headers were outdated (reported by Emmanuel Seyman) * Fixes SF #1044: tt-rss API changed (we now support only 1.6 API) (patch by Sebastian Noel) * Fixes assertion when creating new tt-rss subscriptions * Fixes XHTML errors caused by extra <body> tags returned by tt-rss * Fixes missing item list update when browsing item URLs in Liferea 2012-10-28 Lars Windolf <[email protected]> Version 1.9.7 * Added new preference for default viewing mode. * Changing toolbar button order to prevent accidental clicks on "Mark All Read" when clicking on more frequent buttons like "Next Unread". * Added Google Chrome as a browser choice to preferences. * Roughly reordered browser choices after browser market share. * Removed shading behaviour for unread items in combined view as it doesn't match GTK theming well * Removed auto-hide Javascript menu from combined view to simplify rendering in 3-pane modes. * Fixes items not removed from search folder count when feed is removed. * Fixes search folder rebuilding (do not include comment items). * Fixes SELECT offset handling when rebuilding search folders. * Now gives feedback when rebuilding search folders in feed list. * Update of German translation 2012-10-09 Lars Windolf <[email protected]> Version 1.9.6 * Removed "pass URL" check box from MIME type dialog. * Removed "Save In" entry from "Download" tab in preferences. * Removed "curl" choice in download tool preferences. * Removed "wget" choice in download tool preferences. * Added "steadyflow" choice in download tool preferences. * Patch SF #3569056: Use symbolic close buttons and spacing on tabs like gedit (Sebastian Keller) * Fixes reloading item when browsing the web inside the item view. * Fixes preferences dialog not opening up a second time. * Fixes padding/alignments in preferences dialog. * Fixes SF #1418701: Remote server pounded into dirt on auto-download (reported by anonymous) * Fixes SF #3567827: Double border around webview (reported by borschty) * Fixes SF #3572660: crash in google_source_remove_node (reported by Yanko Kaneti) * Prevents adding folders/search folders/newsbins to Google Reader * Prevents sorting subscriptions in Google Reader * Updated Polish translation (Wojciech Myrda) 2012-09-14 Lars Windolf <[email protected]> Version 1.9.5 * GIR dependencies are now mandatory * Migration to XDG directory layout in $HOME * Migrate from X session manager to GtkApplication * Raising GTK dependency to 3.4 for GtkApplication * Storing last window state in GConf now instead in the session command * Added Instapaper.com to social bookmarking sites (SF #3564393) (patch by prurigro) * Use hint label for manual browser command preference (SF #3129429) (patch by Fred Morcos) * Fixes comments_deinit() never being called * Fixes search folder counter update on feed removal * Fixes SF #3567715: Crash on network online status changes (patch by Yanko Kaneti) 2012-08-24 Lars Windolf <[email protected]> Version 1.9.4 * Changes (c) name "Lars Lindner" -> "Lars Windolf" due to marriage * Removed compilation support for GTK2 * Added GIR plugin system with libpeas * Added GnomeKeyring plugin that stores password in a keyring instead of in the exported OPML. * Added simple media player plugin to play audio and video enclosures. * Only present enclosures of audio and video MIME type * Raise libindicate minimum dependency to 0.6 * Patch SF #3515882: Also support libindicate 0.7 (Chow Loong Jin) * Dropping SIGSEGV signal handler to allow distro crash report tools to work (as found in Ubuntu) * Ensure node ids are in DB node relation on startup. * Adding AM_PROG_AR to configure.ac to work with automake 1.12 * Moved tab close button from the URL bar to the right of the tab label. * Smarter browser toolbar: appears now also in the item view when browsing external content. * Don't ask for Google Reader authentication more than three times with auto-update to avoid annoying the user. * Fixes SF Trac #10: Crash on empty search folders within folders (reported by phyxi) * Fixes SF Trac #19: Auto-load-link doesn't work with feeds with comments (reported by wonk0) * Fixes SF #2855990: Crash when dragging Google Reader feeds outside Google Reader. This is now prevented. (reported by algnod) * Fixes SF #3515880: missing include when compiling with libindicate (patch by Chow Loong Jin) * Fixes search folders being invisible in reduced mode. * Fixes ever growing temporary DB files. (patch by Sven Hartge) * Fixes visibility of enclosure list view for Ubuntu. * Fixes crashes on enclosure list context menu. * Fixes SF #3557513: Fixes crash on empty links in auto-load-link mode. (patch by msquared84) * Fixes unknown metadata types reported in trace when loading Google Reader subscriptions from DB. 2012-03-30 Lars Lindner <[email protected]> Version 1.9.3 * Added a new item history feature that allows navigating through recently viewed items. * Added new "Fullscreen" toggle menu option. * For GTK+3: request dark theme variant for better contrast between GUI and content. (Jeff Fortin) * Change schema defaults for folder display. Now unread items are loaded per-default when clicking a folder. * Patch SF #3473743: GTK2 dependency has to be 2.24 (bento) * Improve DB item counting statements. (patch by Regis Floret) * Change OpenStreetMap rendering from osmarender to mapnik. (patch by Mikel Olasagasti) * Patch SF #3127016: Automatic scrollbars on enclosure actions view (patch by Fred Morcos) * SF Trac #7: Removing icon from "Cancel All" in update dialog so that .gtkrc "gtk-button-images=0" does have correct effect. (reported by phixy) * Fixes SF #3480238: crashes when double clicking find (reported by joeserneem) * Fixes Debian #660602: Item pane may be reset during feed update (reported by Ben Hutchings) * Reimplemented search folder rule for item with enclosures. * Reimplemented search folder rule for item categories. * Reimplemented feed title matching rule for search folders. (patch by John Levon) * Updated Catalan translation (Gil Forcada) 2012-03-23 Lars Lindner <[email protected]> Version 1.9.2 * Fixes another migration issue left from 1.9.1 * Increasing sqlite3 dependency to 3.7+ for WAL journaling. * Removed sqliteasync code in favour of WAL journaling. This significantly improves performance for ext4. * Added indices for parent_item_id and parent_node_id to avoid slow item removal. (suggested by Paulo Anes) 2012-03-18 Lars Lindner <[email protected]> Version 1.9.1 * Disabled migration to ~/.liferea_1.9 * Revert ISO 8601 parsing using Glib due to Debian #653196 This fixes SF #3465106 (reported by Vincent Lefevre) * Fixes SF #3477582: welcome screen not using theme colors. (reported by stqn) * Do not update DB node and subscription info on startup for performance reasons. * Perform VACCUM only when page fragmentation ratio < 10%. (suggested by adriatic) * Removed tooltip on the "Next Unread Item" button to avoid having it flashing each time it is clicked when skimming through items. 2011-12-23 Lars Lindner <[email protected]> Version 1.9.0 * Add configure switch to compile against GTK2 or GTK3. (Emilio Pozuelo Monfort, Adrian Bunk) * Raise dependencies and updated code to compile against GTK3. (Emilio Pozuelo Monfort, Adrian Bunk) * Fixes proxy preference not affecting the HTML widget. (reported by Chris Siebenmann) * Fixes SF #3363481: Feeds fail to update properly when entries ordered "wrong" (patch by Robert Trace) * Fixes writing subscriptions into DB when importing from OPML (reported by Dennis Nezic)
jperkin
pushed a commit
that referenced
this issue
Dec 4, 2015
== v0.18.4 [2015-11-13] Michael Granger <[email protected]> Enhancements: - Fixing compilation problems with Microsoft Visual Studio 2008. GH #10 - Avoid name clash with xcode and jemalloc. PR#22, PR#23 Bugfixes: - Avoid segfault, when quote_ident or TextEncoder::Identifier is called with Array containing non-strings. #226
jperkin
pushed a commit
that referenced
this issue
Dec 14, 2015
=== Net::LDAP 0.12.1
* Whitespace formatting cleanup
{#236}[ruby-ldap/ruby-net-ldap#236]
* Set operation result if LDAP server is not accessible
{#232}[ruby-ldap/ruby-net-ldap#232]
=== Net::LDAP 0.12.0
* DRY up connection handling logic
{#224}[ruby-ldap/ruby-net-ldap#224]
* Define auth adapters
{#226}[ruby-ldap/ruby-net-ldap#226]
* add slash to attribute value filter
{#225}[ruby-ldap/ruby-net-ldap#225]
* Add the ability to provide a list of hosts for a connection
{#223}[ruby-ldap/ruby-net-ldap#223]
* Specify the port of LDAP server by giving INTEGRATION_PORT
{#221}[ruby-ldap/ruby-net-ldap#221]
* Correctly set BerIdentifiedString values to UTF-8
{#212}[ruby-ldap/ruby-net-ldap#212]
* Raise Net::LDAP::ConnectionRefusedError when new connection is
refused. {#213}[ruby-ldap/ruby-net-ldap#213]
* obscure auth password upon #inspect, added test, closes #216
{#217}[ruby-ldap/ruby-net-ldap#217]
* Fixing incorrect error class name
{#207}[ruby-ldap/ruby-net-ldap#207]
* Travis update {#205}[ruby-ldap/ruby-net-ldap#205]
* Remove obsolete rbx-19mode from Travis
{#204}[ruby-ldap/ruby-net-ldap#204]
* mv "sudo" from script/install-openldap to .travis.yml
{#199}[ruby-ldap/ruby-net-ldap#199]
* Remove meaningless shebang
{#200}[ruby-ldap/ruby-net-ldap#200]
* Fix Travis CI build
{#202}[ruby-ldap/ruby-net-ldap#202]
* README.rdoc: fix travis link
{#195}[ruby-ldap/ruby-net-ldap#195]
jperkin
pushed a commit
that referenced
this issue
Feb 15, 2016
Needed by py-google-api-python-client-1.4.2. ## v1.5.2 * Add access token refresh error class that includes HTTP status (#310) * Python3 compatibility fixes for Django (#316, #318) * Fix incremental auth in flask_util (#322) * Fall back to credential refresh on EDEADLK in multistore_file (#336) ## v1.5.1 * Fix bad indent in `tools.run_flow()` (#301, bug was introduced when switching from 2 space indents to 4) ## v1.5.0 * Fix (more like clarify) `bytes` / `str` handling in crypto methods. (#203, #250, #272) * Replacing `webapp` with `webapp2` in `oauth2client.appengine` (#217) * Added optional `state` parameter to `step1_get_authorize_url`. (#219 and #222) * Added `flask_util` module that provides a Flask extension to aid with using OAuth2 web server flow. This provides the same functionality as the `appengine.webapp2` OAuth2Decorator, but will work with any Flask application regardless of hosting environment. (#226, #273) * Track scopes used on credentials objects (#230) * Moving docs to [readthedocs.org][1] (#237, #238, #244) * Removing `old_run` module. Was deprecated July 2, 2013. (#285) * Avoid proxies when querying for GCE metadata (to check if running on GCE) (#114, #293) [1]: https://readthedocs.org/ ## v1.4.12 * Fix OS X flaky test failure (#189). * Fix broken OpenSSL import (#191). * Remove `@util.positional` from wrapped request in `Credentials.authorize()` (#196, #197). * Changing pinned dependencies to `>=` (#200, #204). * Support client authentication using `Authorization` header (#206). * Clarify environment check in case where GAE imports succeed but GAE services aren't available (#208). ## v1.4.11 * Better environment detection with Managed VMs. * Better OpenSSL detection in exotic environments. ## v1.4.10 * Update the `OpenSSL` check to be less strict about finding `crypto.py` in the `OpenSSL` directory. * `tox` updates for new environment handling in `tox`. ## v1.4.9 * Ensure that the ADC fails if we try to *write* the well-known file to a directory that doesn't exist, but not if we try to *read* from one. ## v1.4.8 * Better handling of `body` during token refresh when `body` is a stream. * Better handling of expired tokens in storage. * Cleanup around `openSSL` import. * Allow custom directory for the `well_known_file`. * Integration tests for python2 and python3. (!!!) * Stricter file permissions when saving the `well_known_file`. * Test cleanup around config file locations. ## v1.4.7 * Add support for Google Developer Shell credentials. * Better handling of filesystem errors in credential refresh. * python3 fixes * Add `NO_GCE_CHECK` for skipping GCE detection. * Better error messages on `InvalidClientSecretsError`. * Comment cleanup on `run_flow`. ## v1.4.6 * Add utility function to convert PKCS12 key to PEM. (#115) * Change GCE detection logic. (#93) * Add a tox env for doc generation. ## v1.4.5 * Set a shorter timeout for an Application Default Credentials issue on some networks. (#93, #101) * Test cleanup, switch from mox to mock. (#103) * Switch docs to sphinx from epydoc. ## v1.4.4 * Fix a bug in bytes/string encoding of headers. ## v1.4.3 * Big thanks to @dhermes for spotting and fixing a mess in our test setup. * Fix a serious issue with tests not being run. (#86, #87, #89) * Start credentials cleanup for single 2LO/3LO call. (#83, #84) * Clean up stack traces when re-raising in some places. (#79) * Clean up doc building. (#81, #82) * Fixed minimum version for `six` dependency. (#75)
jperkin
pushed a commit
that referenced
this issue
Mar 23, 2016
LIBOPENDKIM: Make strict header checking non-destructive.
The last change to this code resulted in failing signatures.
2.10.2 2015/05/10
Fix bug #221: Report a DKIM result of "policy" if MinimumKeyBits
or UnprotectedKey cause the signature to result in a "pass"
override.
Fix bug #227: Revert removal of SenderHeaders configuration setting.
Document that it is now limited to signature selection.
LIBOPENDKIM: Fix bug #226: Deal with header fields that are
wrapped before there's any content.
CONTRIB: Update to contrib/systemd/opendkim.service.in
jperkin
pushed a commit
that referenced
this issue
Aug 4, 2016
Upstream changes:
0.9995 2016-07-27T09:23:55Z
- Taught the `add` command not to ignore the `--change` option.
- The `add` command now emits a usage statement when no change name is
passed to it.
- The `add` command now helpfully suggests using the --change option when
attempting to add a change with the same name as a target. Thanks to
Ivan Nunes for the report!
- The `tag` command now helpfully suggests using the --tag option when
attempting to add a tag with the same name as a target.
- Added `--global` as an alias for `--user` to the `config` command. This
alias benefits the muscle memory of Git users.
- Added a note for Git users to the `sqitch-revert` documentation, to
head off potential confusion with `git revert`. Thanks to Eric
Br矇chemier for the "time travel" analogy and wording.
- Fixed an "uninitialized value" error when creating a registry database
on Windows. Thanks to Steven C. Buttgereit for the report (Issue #289).
- Fixed editor selection to prioritize the `core.editor` configuration
variable over the `$EDITOR` environment variable. The `$SQITCH_EDITOR`
environment variable still trumps all. Thanks to Jim Nasby for the pull
request (#296).
- Added detection of the `$VISUAL` environment variable to Editor
selection, prioritzed after the `core.editor` configuration variable
and before the `$EDITOR` environment variable. Thanks to Jim Nasby for
the pull request (#296).
- Updated the DateTime code to set the locale via `set_locale()` instead
of `set()`, as the latter may actually change the local time
unintentionally, and has been deprecated since DateTime v1.04. Thanks
to Dave Rolsky for the pull request (#304).
0.9994 2016-01-08T19:46:43Z
- Reduced minimum required MySQL engine from 5.1.0 to 5.0.0. Thanks to
@dgc-wh for testing it (Issue #251).
- Fixed floating-point rounding issue with SQLite registry versions on
Perls with 16-byte doubles. Thanks to H. Merijn Brand for the report
and testing.
- Fixed an error when adding an engine with the `engine` command. Thanks
to Victor Mours for the report and fix!
- Updated the Oracle engine to support Oracle Wallet connection strings,
where no username or host is in the connection URI. Thanks to Timothy
Procter for the patch!
- Improved the installer's selection of the prefix in which to install
`etc` files to better match the `--installdirs` option, which defaults
to the "site" directories. Thanks to @carragom for the pull request
(#265).
- Added missing dash to `-engine` in sample calls to `sqitch init` in the
tutorials. Thanks to Andrew Dunstan for the spot (Issue #268).
- Fixed broken Vertica documentation links.
- Attempting to revert a database with no associated registry no longer
reports the registry as version 0, but correctly reports that no
registry can be found. Thanks to Arnaldo Piccinelli for the spot (Issue
#271).
- Fixed the search for change IDs in engines to match the search for
changes. Specifically, change ID seaerch now properly handles the
offset characters `~` and `^`. This bug mainly affected the `verify`
command, but it's good to address the inconsistency, done mainly by
adding the `find_change_id` and `change_id_offset_from_id` methods to
complement the `find_change` and `change_offset_from_id` methods.
Thanks to Andrew Dunstan for the spot (Issue #272).
- Fixed the `flips` table example in the MySQL tutorial. It was
inappropriately copied from the PostgreSQL tutorial at some point.
Thanks to Jeff Carpenter for the spot (Issue #254)!
0.9993 2015-08-17T17:55:26Z
[Bug Fixes]
- Eliminated test failures due to warnings from DateTime::Locale when
`LC_TIME` is set to C.UTF-8. Thanks to Shantanu Bhadoria for the report
and Dave Rolsky for the workaround.
- Fixed an error checking the registry version when the local uses a
comma for decimal values. Thanks to Steffen M羹ller for the report
(Issue #234).
- Worked around an error setting the MySQL storage engine using versions
of DBI prior to 1.631. Thanks to melon-babak for the report!
- Fixed an error from the Oracle engine when deploying more than 1000
changes. Thanks to Timothy Procter and Minh Hoang for the report and
testing the fix.
- Fixed a bunch of typos in error messages, comments, and documentation.
Thanks to Dmitriy for the pull request!
- Fixed test failures due to new warnings from File::Path on Perl
5.23.1.
- On Firebird, Looking up a change and tag in the database (via the
`--onto` option to `rebase` or the `--to` option to `revert`, among
others) would sometimes return the incorrect change if the change has
been reworked two or more times. Was fixed for the other engines in
v0.9991.
- Fixed the `--all` option used to apply a command to all known targets
so that it loads only targets specified by the local configuration.
Otherwise, user and system configuration can get in the way when they
specify engines and targets not used by the current project.
[Improvements]
- Added support for the `--set` option when deploying to MySQL. Thanks to
Chris Bandy for figuring out how to do it!
- Added support for a "reworked directory". By default, reworked change
scripts live in the deploy, revert, and verify directories along with
all the other change scripts. But if that starts to get too messy, or
you simply don't want to see them, add a `reworked_dir` setting to the
core, engine, or target config and reworked scripts will be stored
there, instead. Also supported are `reworked_deploy_dir`,
`reworked_revert_dir`, and `reworked_verify_dir`.
- Added the `--dir` option to the `init`, `engine`, and `target`
commands.
- Copied the core configuration options (`--engine`, `--target`,
`--plan-file`, `--registry`, etc.) to the `init`, `engine`, and
`target` commands. This means that they can be specified after the
command, which is a bit more natural. It also means that the
`--registry` and `--client` options of the `target` are no longer
deprecated.
- The `init` command on longer writes out commented values for the
`deploy_dir`, `revert_dir`, or `verify_dir` settings. I think these
settings are not commonly used, and it would start to get crowded if we
also added their "reworked" variants, which will be used still less.
- Added the `alter` action to the `engine` and `target` commands to set
engine and target properties.
- Added support for setting reworked directories to the `engine` and
`target` commands.
- Reformatted the output of the `engine` and `target` command `show`
actions to include reworked directories, and to bit a bit less flat.
- Attempting to add or alter an engine with a target URI that connects to
a different engine now triggers an error. For example, you can't set
the target for engine `pg` to `db:sqlite:`.
- The `add` and `alter` actions of the `engine` and `target` commands
now create script directories if they don't already exist.
- The `add` action of the `engine` and `target` commands now creates a
plan file if one does not exist in the specified location for the
engine or target.
- Added the `deploy_dir`, `revert_dir`, and `verify_dir` methods to
App::Sqitch::Plan::Change. Each points to the proper directory for the
target depending on whether or not the change has been reworked.
- In the MySQL engine, the following URI query params will be converted
to options passed to the command-line client, if they're present:
* mysql_compression=1 => --compress
* mysql_ssl=1 => --ssl
* mysql_connect_timeout => --connect_timeout
* mysql_init_command => --init-command
* mysql_socket => --socket
* mysql_ssl_client_key => --ssl-key
* mysql_ssl_client_cert => --ssl-cert
* mysql_ssl_ca_file => --ssl-ca
* mysql_ssl_ca_path => --ssl-capath
* mysql_ssl_cipher => --ssl-cipher
[Documentation]
- Added the "Overworked" section to sqitch-configuration guide with an
example of how to move reworked change scripts into a `reworked_dir`.
[Deprecations]
- Deprecated the `set-*` actions in the `engine` and `target` commands in
favor of the new `alter` action.
- The core `--deployed-dir`, `--revert-dir`, and `--verify-dir` options
are deprecated in favor of the `--dir` option on the `init`, `engine`,
and `target` command.
0.9992 2015-05-20T23:51:41Z
- On PostgreSQL, Sqitch now sets the `client_encoding` parameter to
`UTF8` for its own connection to the database. This ensures that data
sent to and from the databse should always be properly encoded and
decoded. Users should still set the proper encodings for change scripts
as appropriate.
- Fixed test failures due to path differences on Windows.
- DateTime::TimeZone is now explicitly required in an attempt to head off
"Cannot determine local time zone" errors.
- Corrected some typos and thinkos in `sqitchtutorial-oracle`, thanks to
George Hartzell.
- Improved the script to upgrade an Oracle registry to v1.0 to support
versions prior to Oracle 12, thanks to Timothy Procter.
- Added missing closing parenthesis to the "Nothing to deploy" message.
Thanks to George Hartzell for the pull request (Issue #226).
- Replaced the unique constraint on the `script_hash` column in the
`changes` registry table with a unique constraint on `project` and
`script_hash`. This is to allow a deploy script to be used in more than
one project in a single database. This change increments the registry
version to v1.1. Thanks to Timothy Procter for the report.
- Updated the registry check constraints to have consistent names on the
engines that support them. This will make it easier to modify the
constraints in the future.
- Fixed precision issues with the registry version on MySQL and Firebird.
- Added comment to sqitch-passwords guide that MySQL::Config is required
to read passwords from the MySQL configuration files. Thanks to
Sterling Hanenkamp for the patch!
0.9991 2015-04-03T23:14:39Z
[Improvements]
- Reduced minimum required MySQL engine from 5.6.4 to 5.1.0. Versions
prior to 5.6.4 lose the following features:
* Versions earlier than 5.6.4 is fractional second precision on
registry `DATETIME` columns. Since the ordering of those timestamps
is so important to the functioning of Sqitch, it will sleep in 100 ms
increments between logging changes to the registry until the time has
ticked over to the next second. Naturally, reverts and deploys will
be a little slower on versions of MySQL before 5.6.4, but accurate.
* Versions earlier than 5.5.0 lose the `checkit()` functions, which
would otherwise be used to emulate CHECK constraints in the registry,
as well as in user-created verify scripts, as recommended in the
MySQL tutorial, `sqitchtutorial-mysql`.
- Added a script to update the `DATETIME` columns in a MySQL Sqitch
registry that was upgraded to MySQL 5.6.4 or higher. It will be
installed as `tools/upgrade-registry-to-mysql-5.6.4.sql` in the
directory returned by `sqitch --etc`.
- Added a script to add the `checkit()` function and registry triggers to
emulate CHECK constraints to a MySQL Sqitch registry that was upgraded
to MySQL 5.5.0 or higher. It will be installed as
`tools/upgrade-registry-to-mysql-5.5.0.sql` in the directory returned
by `sqitch --etc`.
- The `init` command now throws an error when the plan file already
exists and is invalid or defined for a different project. Thanks to
Gabriel Potk獺ny for the suggestion (Issue #214).
- All commands that take target arguments can now specify them as engine
names or plan file paths as well as target names and URIs.
- Added the `--all` option and the `$command.all` configuration variable
to the `add`, `rework`, `tag`, and `bundle` commands. This option tells
the commands to do their thing for all plans known from the
configuration, not just the default plan.
- Pass engine, target, or plan file names to the `add`, `rework`, `tag`,
and `bundle` commands` commands to specify specify one or more targets,
engines, and plans to act on.
- Added the `--change` option to the `add`, `rework`, and `tag` commands
to distinguish the change to be added, reworked, or tagged from
plan-specifying arguments, if necessary.
- Added the `--tag` option to the `tag` command to distinguish the tag to
be added from plan-specifying arguments, if necessary.
- Changed the short variant of the `--conflicts` option to the `add` and
`rework` commands from `-c` to `-x`. The `-c` option is now used as the
short variant for `--change` (and `--conflicts` has almost certainly
never been used, anyway).
- Added the `engine` and `project` variables to the execution of script
templates by the `add` command. The default templates now use it to
make their first lines one of:
* -- Deploy [% project %]:[% change %] to [% engine]
* -- Revert [% project %]:[% change %] from [% engine]
* -- Verify [% project %]:[% change %] on [% engine]
[Bug Fixes]
- DateTime::TimeZone::Local::Win32 is now required on Windows.
- The MySQL engine no longer passes `--skip-pager` on Windows, since
it is not supported there. Thanks to Gabriel Potk獺ny for the report
(Issue #213).
- Fixed "no such table: changes" error when upgrading the SQLite
registry.
- Fixed upgrade failure on PostgreSQL 8.4. Thanks to Phillip Smith for
the report!
- Fixed an error when the `status` command `show_changes` and `show_tags`
configuration variables were set. Thanks to Adrian Klaver for the
report (Issue #219).
- Fixed `log` and `plan` usage statements to properly spell `--abbrev`.
Thanks to Adrian Klaver for the report (Issue #220).
- Fixed the formatting of change notes so that a space precedes the `#`
character whether the note was added by the `--note` option or via an
editor.
- Fixed a bug when parsing plan files with DOS/Windows line endings.
Thanks to Timothy Procter for the report (Issue #212).
- Looking up a change and tag in the database (via the `--onto` option to
`rebase` or the `--to` option to `revert`, among others) would
sometimes return the incorrect change if the change has been reworked
two or more times. Thanks to BryLo for the report!
[Documentation]
- Updated docs to be consistent in referring to the location of the system
configuration and template location as `$(prefix)/etc/sqitch`. Also
added notes pointing to the `--etc-dir` to find out exactly what that
resolves to. Suggested by Joseph Anthony Pasquale Holsten (Issue #167).
[Deprecations]
- Reverted deprecation of the database connection options. Target URIs
are still generally preferred, but sometimes you want to use a target
but just change the user name or database name. Retaining the options
is the easiest way to do this. Plus, a fair number of people have
scripts that use these options, and it seems petty to break them. Sorry
for the double-take here! The list of un-deprecated options is:
* `--db-client`
* `--db-host`
* `--db-port`
* `--db-username`
* `--db-password`
* `--db-name`
0.999 2015-02-12T19:43:45Z
- Improved MySQL missing table error detection by relying on error codes
instead of matching a (possibly localized) error string.
- Made the registry upgrade more transparent when deploying. Sqitch is
now is a little more vigilent in checking for things being out-of-date
and updating them.
- Fixed an issue where the `status` command would return an error when
run against a an older version of the registry.
- Fixed a Postgres test failure when DBD::Pg is installed but psql is not
in the path.
- Now require Config::GitLike 1.15 to build on Windows in order to avoid
test failures when Cwd::abs_path dies on non-existant paths.
- Clarified the behavior of each `deploy` reversion mode with regard to
deploy script vs. verify script failures, and with the expectation that
deploy scripts are atomic.
- Target passwords can now be set via a single environment variable,
`$SQITCH_PASSWORD`. Its value will override URI-specified password.
- Added the sqitch-passwords and sqitch-environment guides.
0.998 2015-01-15T22:17:44Z
- Fixed a bug in `sqitch engine update-config` where it would add data to
config files that did not previously have them, or report that data was
present in nonexistent config files.
- Added the `releases` table to the databases. This table will keep track
of releases of the Sqitch registry schema.
- The Oracle `registry` variable is now always `DEFINE`d when Oracle
scripts run.
- Added the `upgrade` command, which upgrades the schema for the Sqitch
registry for a target database.
- Added the `script_hash` column to the `changes` registry table. This
column contains a SHA-1 hash of the deploy script for the change at the
time it was deployed. For existing registries, the upgrade script sets
its value to be the same as the change ID. This value is update the
next time a project is deployed to the database.
- The error message when `deploy` cannot find the currently-deployed
change ID in the plan now includes more contextual information,
including the change name, associated tags, and the plan file name.
Suggested by Curtis Poe (Issue #205).
- Comments on Firebird registry objects are now created with the
`COMMENT` command, rather than INSERTs into catalog tables.
- Added support for "merge" events, though none are logged, yet.
jperkin
pushed a commit
that referenced
this issue
Jan 23, 2017
This upgrade fixes compatibility with new lxml.
Upstream changelog
==================
2.3.1
_This is a micro release and I have very little time on my hands right now sorry_
Fix crash with no values when the print_values_position param is set (thanks @cristen)
2.3.0
New call API: chart = Line(fill=True); chart.add('title', [1, 3, 12]); chart.render() can now be replaced with Line(fill=True)(1, 3, 12, title='title').render()
Drop python 2.6 support
2.2.3
Fix bar static value positioning (#315)
Add stroke_opacity style (#321)
Remove useless js in sparklines. (#312)
2.2.2
Add classes option.
Handle ellipsis in list type configs to auto-extend parent. (Viva python3)
2.2.0
Support interruptions in line charts (thanks @piotrmaslanka #300)
Fix confidence interval reactiveness (thanks @chartique #296)
Add horizontal line charts (thanks @chartique #301)
There is now a formatter config option to format values as specified. The formatter callable may or may not take chart, serie and index as argument. The default value formatting is now chart dependent and is value_formatter for most graph but could be a combination of value_formatter and x_value_formatter for dual charts.
The human_readable option has been removed. Now you have to use the pygal.formatters.human_readable formatter (value_formatter=human_readable instead of human_readable=True)
New chart type: SolidGauge (thanks @chartique #295)
Fix range option for some Charts (#297 #298)
Fix timezones for DateTimeLine for python 2 (#306, #302)
Set default uri protocol to https (should fix a lot of "no tooltips" bugs).
2.1.1
Import scipy as a last resort in stats.py (should workaround bugs like #294 if scipy is installed but not used)
2.1.0
Bar print value positioning with print_values_position. Can be top, center or bottom (thanks @chartique #291) ci doc
Confidence intervals (thanks @chartique #292) data doc
2.0.12
Use custom xml_declaration avoiding conflict with processing instructions
2.0.11
lxml 3.5 compatibility (#282)
2.0.10
Fix transposable_node in case all attributes are not there. (thanks @yobuntu).
2.0.9
Add dynamic_print_values to show print_values on legend hover. (#279)
Fix unparse_color for python 3.5+ compatibility (thanks @felixonmars, @sjourdois)
Process major labels as labels. (#263)
Fix labels rotation > 180 (#257)
Fix secondary axis
Don't forget secondary series in table rendering (#260)
Add defs config option to allow adding gradients and patterns.
2.0.8
Fix value overwrite in map. (#275)
2.0.7
Fixing to checks breaking rendering of DateTimeLine and TimeDeltaLine (#264) (thanks @mmrose)
Fix render_in_browser. (#266) (#268) (thanks @waixwong)
2.0.6
Avoid x label formatting when label is a string
2.0.5
Fix x label formatting
2.0.4
Fix map coloration
2.0.3
Fix label adaptation. (#256)
Fix wrong radar truncation. (#255)
2.0.2
Fix view box differently to avoid getting a null height on huge numbers. (#254)
Fix broken font_family default
Fix non namespaced svg (without embed) javascript by adding uuid in config object. (config is in window.pygal now).
2.0.1
Fix the missing title on x_labels with labels.
Auto cast to str x labels in non dual charts (#178)
Add print_labels option to print label too. (#197)
Add value_label_font_family and value_label_font_size style options for print_labels.
Default print_zeroes to True
(Re)Add xlink in desc to show on tooltip
Activate element on tooltip hovering. (#106)
Fix radar axis behaviour (#247)
Add tooltip support in metadata to add a title (#249).
Take config class options in account too.
2.0.0
Rework the ghost mechanism to come back to a more object oriented behavior, storing all state in a state object which is created on every render. (#161)
Refactor maps
Add world continents
Add swiss cantons map (thanks @sergedroz)
Add inverse_y_axis options to reverse graph (#24)
Fix DateTimeLine time data loss (#193)
Fix no data for graphs with only zeroes (#148)
Support value formatter for pie graphs (#218) (thanks @never-eat-yellow-snow)
Add new Box plot modes and outliers and set extremes as default (#226 #121 #149) (thanks @djezar)
Add secondary_range option to set range for secondary values. (#203)
Maps are now plugins, they are removed from pygal core and moved to packages (pygal_maps_world, pygal_maps_fr, pygal_maps_ch, ...) (#225)
Dot now supports negative values
Fix dot with log scale (#201)
Fix y_labels behaviour for lines
Fix x_labels and y_labels behaviour for xy like
Improve gauge a bit
Finally allow call chains on add
Transform min_scale and max_scale as options
mode option has been renamed to a less generic name: box_mode
fix stack_from_top for stacked lines
Add flake8 test to py.test in tox
Remove stroke style in style and set it as a global / serie configuration.
Fix None values in tables
Fix timezones in DateTimeLine
Rename in Style foreground_light as foreground_strong
Rename in Style foreground_dark as foreground_subtle
Add a render_data_uri method (#237)
Move font_size config to style
Add font_family for various elements in style
Add googlefont:font support for style fonts
Add tooltip_fancy_mode to revert to old tooltips
Add auto print_value color + a configurable value_colors list in style
Add guide_stroke_dasharray and guide_stroke_dasharray in style to customize guides (#242) (thanks @cbergmiller)
Refactor label processing in a _compute_x_labels and _compute_y_labels method. Handle both string and numbers for all charts. Create a Dual base chart for dual axis charts. (#236)
Better js integration in maps. Use the normal tooltip.
jperkin
pushed a commit
that referenced
this issue
Apr 28, 2017
Changes between 1.5.2 and 1.4.1:
lapp: print left in code
issue #228: bug in file matching for dir.getfiles
issue #243 broken lapp default: little fix to c222e422274c
testclone example assumed global lfs
update changes and version number
issue #226: can use either = or : to separate flag/value
issue #241: little hack to handle no-trailing-comment case
Merge pull request #193 from jvprat/class_tostring
Setup __tostring on class creation instead of per instance.
Merge pull request #240 from urzds/fix/lapp-convert-defaults
lapp: Convert default values using the associated converter function
Merge pull request #242 from tjachmann/workaround-for-pretty.load-error
Workaround for error in pretty.load with a C hook
pretty.load errors out, if a C hook function is installed (Lua 5.1). Reason: debug.gethook() returns a string as first return value in this case. Then debug.sethook complains about the first argument being a string not a function.
lapp: Convert default values using the associated converter function
Also uses quite some hack to catch errors during conversion of default values.
This prevents the application from quitting, if the value provided as default
would be invalid in the current context, while the value provided on the
command line is valid.
Also handles -h and --help early, before parsing command line arguments
Otherwise it would be impossible to show the help, if conversion of the
default value of some argument fails.
Merge pull request #239 from kulla/rename-arg-pattern
dir.lua: Rename arg "pattern" to "shell_pattern"
Fix a test to pass under LuaJIT with Lua 5.2 compat
Merge pull request #237 from Tieske/fix/execute
fix os.execute
Merge branch 'master' of https://github.com/stevedonovan/Penlight into fix/execute
fix os.execute to return proper results when LuaJIT is being used with 52 compatibility enabled
Tweak local declaration in pl.compat
Avoid duplicated variable.
Fix a typo in pl.seq docs [ci skip]
Merge pull request #233 from greatwolf/seq_coverage
Added more test coverage for pl.seq
Added test for seq.printall.
Minor refactor of existing test.
Added missing test case for equal_to and random.
Added tests for seq.random, minmax, enum and copy_tuples.
seq coverage
Merge pull request #231 from greatwolf/bugfix_refactor
Redid PR #230 as a separate branch.
Added more tests for seq.reduce.
Fixed seq.reduce to handle empty case.
Allow passing initial value when calling reduce through seq object.
naming consistency.
redundant checks.
Update version number in docs
Fix typos in pl.lapp docs
Added tests for seq.take.
Just use n as counter.
Added tests for seq.skip.
Fixed bug when skipping past list.
More concise code.
Initial value argument for `tablex.reduce` is going to be added in 1.5.0, not 1.3.2
Merge pull request #213 from gpleiss/reduce-memo
tablex.reduce can take an optional initial memo
tablex.reduce can take an optional initial memo
Add "in progress" changes [ci skip]
Merge pull request #221 from mpeterv/fix-stringx-splitlines
Fix stringx.splitlines
Fix coverage reporting on travis
Tests are now run from project root.
pl.seq() constructor can take an iterator which returns a function _and_ an object
issue #226 lapp respects ':' as well as '='
Merge pull request #225 from kulla/dir-some-fixes
Little fixes in dir.lua
dir.lua: Replace tab with whitespace in docstring.
The tab characters create a strange format in documentatio (cf.
https://stevedonovan.github.io/Penlight/api/libraries/pl.dir.html#getallfiles
)
dir.lua: Remove file execution permission.
Merge pull request #224 from kulla/utils-doctring-fix
Fix usage example of string_lambda().
utils.lua: Fix usage example of string_lambda().
Update docs for template.substitute
Merge pull request #222 from urzds/feature/template-customisable-filename
pl.template: Support customising the chunk "filename" (default: TMP)
pl.template: Support customising the chunk name (default: "TMP")
This can be used to aid debugging, e.g. when the template resides in an actual
file.
Fix handling of __index returning false in pl.strict
Ref #223.
Add a test for tablex.count_map
Merge pull request #214 from urzds/feat/customisable-inline-escape
pl.template: Support customising the inline escape character (default…
pl.data: faster delimiter guessing
Don't count occurrences of potential delims, just use string.find.
Fix error in tablex.count_map
Regression introduced in @6123f9e.
Remove unused localizations, update dependency lists
Don't use globals in 'pl.data' tests
Fix stringx.splitlines
Make stringx.splitlines more compliant with its Python
analogue:
* Recognize "\r\n" as a single line end.
* Return an empty list for an empty string.
* Implement `keep_ends` argument.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
It was reported in #smartos that unrealircd refused to launch after an openssl related update. Specifically it had the following message: http://pastebin.com/e9wnhtim.
The text was updated successfully, but these errors were encountered: