More sfctemp work #14
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Signed-off-by: Emil Renner Berthing <[email protected]>
Signed-off-by: Emil Renner Berthing <[email protected]>
When the RUN bit is set comments suggests conversions are done every 8192 / (2MHz) ~= 4ms. Looking at /proc/interrupts without this patch also shows a lot of interrupts from 124a0000.tmon. Let's just do the a single conversion when prompted by userspace or the thermal framework. Signed-off-by: Emil Renner Berthing <[email protected]>
|
user space output looks okay here:
|
|
@sarnold Thank you |
esmil
pushed a commit
that referenced
this pull request
May 30, 2021
When the kernel mapping was moved the last 2GB of the address space, (__va(PFN_PHYS(max_low_pfn))) is much smaller than the .data section start address, the last set_memory_nx() in protect_kernel_text_data() will fail, thus the .data section is still mapped as W+X. This results in below W+X mapping waring at boot. Fix it by passing the correct .data section page num to the set_memory_nx(). [ 0.396516] ------------[ cut here ]------------ [ 0.396889] riscv/mm: Found insecure W+X mapping at address (____ptrval____)/0xffffffff80c00000 [ 0.398347] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/ptdump.c:258 note_page+0x244/0x24a [ 0.398964] Modules linked in: [ 0.399459] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1+ #14 [ 0.400003] Hardware name: riscv-virtio,qemu (DT) [ 0.400591] epc : note_page+0x244/0x24a [ 0.401368] ra : note_page+0x244/0x24a [ 0.401772] epc : ffffffff80007c86 ra : ffffffff80007c86 sp : ffffffe000e7bc30 [ 0.402304] gp : ffffffff80caae88 tp : ffffffe000e70000 t0 : ffffffff80cb80cf [ 0.402800] t1 : ffffffff80cb80c0 t2 : 0000000000000000 s0 : ffffffe000e7bc80 [ 0.403310] s1 : ffffffe000e7bde8 a0 : 0000000000000053 a1 : ffffffff80c83ff0 [ 0.403805] a2 : 0000000000000010 a3 : 0000000000000000 a4 : 6c7e7a5137233100 [ 0.404298] a5 : 6c7e7a5137233100 a6 : 0000000000000030 a7 : ffffffffffffffff [ 0.404849] s2 : ffffffff80e00000 s3 : 0000000040000000 s4 : 0000000000000000 [ 0.405393] s5 : 0000000000000000 s6 : 0000000000000003 s7 : ffffffe000e7bd48 [ 0.405935] s8 : ffffffff81000000 s9 : ffffffffc0000000 s10: ffffffe000e7bd48 [ 0.406476] s11: 0000000000001000 t3 : 0000000000000072 t4 : ffffffffffffffff [ 0.407016] t5 : 0000000000000002 t6 : ffffffe000e7b978 [ 0.407435] status: 0000000000000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.408052] Call Trace: [ 0.408343] [<ffffffff80007c86>] note_page+0x244/0x24a [ 0.408855] [<ffffffff8010c5a6>] ptdump_hole+0x14/0x1e [ 0.409263] [<ffffffff800f65c6>] walk_pgd_range+0x2a0/0x376 [ 0.409690] [<ffffffff800f6828>] walk_page_range_novma+0x4e/0x6e [ 0.410146] [<ffffffff8010c5f8>] ptdump_walk_pgd+0x48/0x78 [ 0.410570] [<ffffffff80007d66>] ptdump_check_wx+0xb4/0xf8 [ 0.410990] [<ffffffff80006738>] mark_rodata_ro+0x26/0x2e [ 0.411407] [<ffffffff8031961e>] kernel_init+0x44/0x108 [ 0.411814] [<ffffffff80002312>] ret_from_exception+0x0/0xc [ 0.412309] ---[ end trace 7ec3459f2547ea83 ]--- [ 0.413141] Checked W+X mappings: failed, 512 W+X pages found Fixes: 2bfc6cd ("riscv: Move kernel mapping outside of linear mapping") Signed-off-by: Jisheng Zhang <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Jun 6, 2021
When the kernel mapping was moved the last 2GB of the address space, (__va(PFN_PHYS(max_low_pfn))) is much smaller than the .data section start address, the last set_memory_nx() in protect_kernel_text_data() will fail, thus the .data section is still mapped as W+X. This results in below W+X mapping waring at boot. Fix it by passing the correct .data section page num to the set_memory_nx(). [ 0.396516] ------------[ cut here ]------------ [ 0.396889] riscv/mm: Found insecure W+X mapping at address (____ptrval____)/0xffffffff80c00000 [ 0.398347] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/ptdump.c:258 note_page+0x244/0x24a [ 0.398964] Modules linked in: [ 0.399459] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1+ #14 [ 0.400003] Hardware name: riscv-virtio,qemu (DT) [ 0.400591] epc : note_page+0x244/0x24a [ 0.401368] ra : note_page+0x244/0x24a [ 0.401772] epc : ffffffff80007c86 ra : ffffffff80007c86 sp : ffffffe000e7bc30 [ 0.402304] gp : ffffffff80caae88 tp : ffffffe000e70000 t0 : ffffffff80cb80cf [ 0.402800] t1 : ffffffff80cb80c0 t2 : 0000000000000000 s0 : ffffffe000e7bc80 [ 0.403310] s1 : ffffffe000e7bde8 a0 : 0000000000000053 a1 : ffffffff80c83ff0 [ 0.403805] a2 : 0000000000000010 a3 : 0000000000000000 a4 : 6c7e7a5137233100 [ 0.404298] a5 : 6c7e7a5137233100 a6 : 0000000000000030 a7 : ffffffffffffffff [ 0.404849] s2 : ffffffff80e00000 s3 : 0000000040000000 s4 : 0000000000000000 [ 0.405393] s5 : 0000000000000000 s6 : 0000000000000003 s7 : ffffffe000e7bd48 [ 0.405935] s8 : ffffffff81000000 s9 : ffffffffc0000000 s10: ffffffe000e7bd48 [ 0.406476] s11: 0000000000001000 t3 : 0000000000000072 t4 : ffffffffffffffff [ 0.407016] t5 : 0000000000000002 t6 : ffffffe000e7b978 [ 0.407435] status: 0000000000000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.408052] Call Trace: [ 0.408343] [<ffffffff80007c86>] note_page+0x244/0x24a [ 0.408855] [<ffffffff8010c5a6>] ptdump_hole+0x14/0x1e [ 0.409263] [<ffffffff800f65c6>] walk_pgd_range+0x2a0/0x376 [ 0.409690] [<ffffffff800f6828>] walk_page_range_novma+0x4e/0x6e [ 0.410146] [<ffffffff8010c5f8>] ptdump_walk_pgd+0x48/0x78 [ 0.410570] [<ffffffff80007d66>] ptdump_check_wx+0xb4/0xf8 [ 0.410990] [<ffffffff80006738>] mark_rodata_ro+0x26/0x2e [ 0.411407] [<ffffffff8031961e>] kernel_init+0x44/0x108 [ 0.411814] [<ffffffff80002312>] ret_from_exception+0x0/0xc [ 0.412309] ---[ end trace 7ec3459f2547ea83 ]--- [ 0.413141] Checked W+X mappings: failed, 512 W+X pages found Fixes: 2bfc6cd ("riscv: Move kernel mapping outside of linear mapping") Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Jul 11, 2021
ASan reports a heap-buffer-overflow in elf_sec__is_text when using perf-top.
The bug is caused by the fact that secstrs is built from runtime_ss, while
shdr is built from syms_ss if shdr.sh_type != SHT_NOBITS. Therefore, they
point to two different ELF files.
This patch renames secstrs to secstrs_run and adds secstrs_sym, so that
the correct secstrs is chosen depending on shdr.sh_type.
$ ASAN_OPTIONS=abort_on_error=1:disable_coredump=0:unmap_shadow_on_exit=1 ./perf top
=================================================================
==363148==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61300009add6 at pc 0x00000049875c bp 0x7f4f56446440 sp 0x7f4f56445bf0
READ of size 1 at 0x61300009add6 thread T6
#0 0x49875b in StrstrCheck(void*, char*, char const*, char const*) (/home/user/linux/tools/perf/perf+0x49875b)
#1 0x4d13a2 in strstr (/home/user/linux/tools/perf/perf+0x4d13a2)
#2 0xacae36 in elf_sec__is_text /home/user/linux/tools/perf/util/symbol-elf.c:176:9
#3 0xac3ec9 in elf_sec__filter /home/user/linux/tools/perf/util/symbol-elf.c:187:9
#4 0xac2c3d in dso__load_sym /home/user/linux/tools/perf/util/symbol-elf.c:1254:20
#5 0x883981 in dso__load /home/user/linux/tools/perf/util/symbol.c:1897:9
#6 0x8e6248 in map__load /home/user/linux/tools/perf/util/map.c:332:7
#7 0x8e66e5 in map__find_symbol /home/user/linux/tools/perf/util/map.c:366:6
#8 0x7f8278 in machine__resolve /home/user/linux/tools/perf/util/event.c:707:13
#9 0x5f3d1a in perf_event__process_sample /home/user/linux/tools/perf/builtin-top.c:773:6
#10 0x5f30e4 in deliver_event /home/user/linux/tools/perf/builtin-top.c:1197:3
#11 0x908a72 in do_flush /home/user/linux/tools/perf/util/ordered-events.c:244:9
#12 0x905fae in __ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:323:8
#13 0x9058db in ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:341:9
#14 0x5f19b1 in process_thread /home/user/linux/tools/perf/builtin-top.c:1109:7
#15 0x7f4f6a21a298 in start_thread /usr/src/debug/glibc-2.33-16.fc34.x86_64/nptl/pthread_create.c:481:8
#16 0x7f4f697d0352 in clone ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
0x61300009add6 is located 10 bytes to the right of 332-byte region [0x61300009ac80,0x61300009adcc)
allocated by thread T6 here:
#0 0x4f3f7f in malloc (/home/user/linux/tools/perf/perf+0x4f3f7f)
#1 0x7f4f6a0a88d9 (/lib64/libelf.so.1+0xa8d9)
Thread T6 created by T0 here:
#0 0x464856 in pthread_create (/home/user/linux/tools/perf/perf+0x464856)
#1 0x5f06e0 in __cmd_top /home/user/linux/tools/perf/builtin-top.c:1309:6
#2 0x5ef19f in cmd_top /home/user/linux/tools/perf/builtin-top.c:1762:11
#3 0x7b28c0 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#4 0x7b119f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#5 0x7b2423 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#6 0x7b0c19 in main /home/user/linux/tools/perf/perf.c:539:3
#7 0x7f4f696f7b74 in __libc_start_main /usr/src/debug/glibc-2.33-16.fc34.x86_64/csu/../csu/libc-start.c:332:16
SUMMARY: AddressSanitizer: heap-buffer-overflow (/home/user/linux/tools/perf/perf+0x49875b) in StrstrCheck(void*, char*, char const*, char const*)
Shadow bytes around the buggy address:
0x0c268000b560: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c268000b570: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c268000b580: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c268000b590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c268000b5a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>0x0c268000b5b0: 00 00 00 00 00 00 00 00 00 04[fa]fa fa fa fa fa
0x0c268000b5c0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
0x0c268000b5d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c268000b5e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c268000b5f0: 07 fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c268000b600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
Shadow gap: cc
==363148==ABORTING
Suggested-by: Jiri Slaby <[email protected]>
Signed-off-by: Riccardo Mancini <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Fabian Hemmer <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Remi Bernon <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Sep 20, 2021
It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <[email protected]> CC: Milian Wolff <[email protected]> Cc: Jiri Olsa <[email protected]> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/[email protected] Reported-by: Juri Lelli <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Sep 24, 2021
commit 57f0ff0 upstream. It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <[email protected]> CC: Milian Wolff <[email protected]> Cc: Jiri Olsa <[email protected]> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/[email protected] Reported-by: Juri Lelli <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Nov 14, 2021
The exit function fixes a memory leak with the src field as detected by
leak sanitizer. An example of which is:
Indirect leak of 25133184 byte(s) in 207 object(s) allocated from:
#0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803
#2 0x55defe6397e4 in symbol__hists util/annotate.c:952
#3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968
#4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119
#5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182
#6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236
#7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315
#8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473
#9 0x55defe731e38 in machines__deliver_event util/session.c:1510
#10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590
#11 0x55defe72951e in ordered_events__deliver_event util/session.c:183
#12 0x55defe740082 in do_flush util/ordered-events.c:244
#13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323
#14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341
#15 0x55defe73837f in __perf_session__process_events util/session.c:2390
#16 0x55defe7385ff in perf_session__process_events util/session.c:2420
...
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin Liška <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Dec 19, 2021
In `igbvf_probe`, if register_netdev() fails, the program will go to label err_hw_init, and then to label err_ioremap. In free_netdev() which is just below label err_ioremap, there is `list_for_each_entry_safe` and `netif_napi_del` which aims to delete all entries in `dev->napi_list`. The program has added an entry `adapter->rx_ring->napi` which is added by `netif_napi_add` in igbvf_alloc_queues(). However, adapter->rx_ring has been freed below label err_hw_init. So this a UAF. In terms of how to patch the problem, we can refer to igbvf_remove() and delete the entry before `adapter->rx_ring`. The KASAN logs are as follows: [ 35.126075] BUG: KASAN: use-after-free in free_netdev+0x1fd/0x450 [ 35.127170] Read of size 8 at addr ffff88810126d990 by task modprobe/366 [ 35.128360] [ 35.128643] CPU: 1 PID: 366 Comm: modprobe Not tainted 5.15.0-rc2+ #14 [ 35.129789] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 35.131749] Call Trace: [ 35.132199] dump_stack_lvl+0x59/0x7b [ 35.132865] print_address_description+0x7c/0x3b0 [ 35.133707] ? free_netdev+0x1fd/0x450 [ 35.134378] __kasan_report+0x160/0x1c0 [ 35.135063] ? free_netdev+0x1fd/0x450 [ 35.135738] kasan_report+0x4b/0x70 [ 35.136367] free_netdev+0x1fd/0x450 [ 35.137006] igbvf_probe+0x121d/0x1a10 [igbvf] [ 35.137808] ? igbvf_vlan_rx_add_vid+0x100/0x100 [igbvf] [ 35.138751] local_pci_probe+0x13c/0x1f0 [ 35.139461] pci_device_probe+0x37e/0x6c0 [ 35.165526] [ 35.165806] Allocated by task 366: [ 35.166414] ____kasan_kmalloc+0xc4/0xf0 [ 35.167117] foo_kmem_cache_alloc_trace+0x3c/0x50 [igbvf] [ 35.168078] igbvf_probe+0x9c5/0x1a10 [igbvf] [ 35.168866] local_pci_probe+0x13c/0x1f0 [ 35.169565] pci_device_probe+0x37e/0x6c0 [ 35.179713] [ 35.179993] Freed by task 366: [ 35.180539] kasan_set_track+0x4c/0x80 [ 35.181211] kasan_set_free_info+0x1f/0x40 [ 35.181942] ____kasan_slab_free+0x103/0x140 [ 35.182703] kfree+0xe3/0x250 [ 35.183239] igbvf_probe+0x1173/0x1a10 [igbvf] [ 35.184040] local_pci_probe+0x13c/0x1f0 Fixes: d4e0fe0 (igbvf: add new driver to support 82576 virtual functions) Reported-by: Zheyu Ma <[email protected]> Signed-off-by: Letu Ren <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Dec 26, 2021
[ Upstream commit b6d335a ] In `igbvf_probe`, if register_netdev() fails, the program will go to label err_hw_init, and then to label err_ioremap. In free_netdev() which is just below label err_ioremap, there is `list_for_each_entry_safe` and `netif_napi_del` which aims to delete all entries in `dev->napi_list`. The program has added an entry `adapter->rx_ring->napi` which is added by `netif_napi_add` in igbvf_alloc_queues(). However, adapter->rx_ring has been freed below label err_hw_init. So this a UAF. In terms of how to patch the problem, we can refer to igbvf_remove() and delete the entry before `adapter->rx_ring`. The KASAN logs are as follows: [ 35.126075] BUG: KASAN: use-after-free in free_netdev+0x1fd/0x450 [ 35.127170] Read of size 8 at addr ffff88810126d990 by task modprobe/366 [ 35.128360] [ 35.128643] CPU: 1 PID: 366 Comm: modprobe Not tainted 5.15.0-rc2+ #14 [ 35.129789] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 35.131749] Call Trace: [ 35.132199] dump_stack_lvl+0x59/0x7b [ 35.132865] print_address_description+0x7c/0x3b0 [ 35.133707] ? free_netdev+0x1fd/0x450 [ 35.134378] __kasan_report+0x160/0x1c0 [ 35.135063] ? free_netdev+0x1fd/0x450 [ 35.135738] kasan_report+0x4b/0x70 [ 35.136367] free_netdev+0x1fd/0x450 [ 35.137006] igbvf_probe+0x121d/0x1a10 [igbvf] [ 35.137808] ? igbvf_vlan_rx_add_vid+0x100/0x100 [igbvf] [ 35.138751] local_pci_probe+0x13c/0x1f0 [ 35.139461] pci_device_probe+0x37e/0x6c0 [ 35.165526] [ 35.165806] Allocated by task 366: [ 35.166414] ____kasan_kmalloc+0xc4/0xf0 [ 35.167117] foo_kmem_cache_alloc_trace+0x3c/0x50 [igbvf] [ 35.168078] igbvf_probe+0x9c5/0x1a10 [igbvf] [ 35.168866] local_pci_probe+0x13c/0x1f0 [ 35.169565] pci_device_probe+0x37e/0x6c0 [ 35.179713] [ 35.179993] Freed by task 366: [ 35.180539] kasan_set_track+0x4c/0x80 [ 35.181211] kasan_set_free_info+0x1f/0x40 [ 35.181942] ____kasan_slab_free+0x103/0x140 [ 35.182703] kfree+0xe3/0x250 [ 35.183239] igbvf_probe+0x1173/0x1a10 [igbvf] [ 35.184040] local_pci_probe+0x13c/0x1f0 Fixes: d4e0fe0 (igbvf: add new driver to support 82576 virtual functions) Reported-by: Zheyu Ma <[email protected]> Signed-off-by: Letu Ren <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Jan 27, 2022
… flush [ Upstream commit ba53ee7 ] frag_timer will be created & initialized for stations when they associate and will be deleted during every key installation while flushing old fragments. For AP interface self peer will be created and Group keys will be installed for this peer, but there will be no real Station entry & hence frag_timer won't be created and initialized, deleting such uninitialized kernel timers causes below warnings and backtraces printed with CONFIG_DEBUG_OBJECTS_TIMERS enabled. [ 177.828008] ODEBUG: assert_init not available (active state 0) object type: timer_list hint: 0x0 [ 177.836833] WARNING: CPU: 3 PID: 188 at lib/debugobjects.c:508 debug_print_object+0xb0/0xf0 [ 177.845185] Modules linked in: ath11k_pci ath11k qmi_helpers qrtr_mhi qrtr ns mhi [ 177.852679] CPU: 3 PID: 188 Comm: hostapd Not tainted 5.14.0-rc3-32919-g4034139e1838-dirty #14 [ 177.865805] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) [ 177.871804] pc : debug_print_object+0xb0/0xf0 [ 177.876155] lr : debug_print_object+0xb0/0xf0 [ 177.880505] sp : ffffffc01169b5a0 [ 177.883810] x29: ffffffc01169b5a0 x28: ffffff80081c2320 x27: ffffff80081c4078 [ 177.890942] x26: ffffff8003fe8f28 x25: ffffff8003de9890 x24: ffffffc01134d738 [ 177.898075] x23: ffffffc010948f20 x22: ffffffc010b2d2e0 x21: ffffffc01169b628 [ 177.905206] x20: ffffffc01134d700 x19: ffffffc010c80d98 x18: 00000000000003f6 [ 177.912339] x17: 203a657079742074 x16: 63656a626f202930 x15: 0000000000000152 [ 177.919471] x14: 0000000000000152 x13: 00000000ffffffea x12: ffffffc010d732e0 [ 177.926603] x11: 0000000000000003 x10: ffffffc010d432a0 x9 : ffffffc010d432f8 [ 177.933735] x8 : 000000000002ffe8 x7 : c0000000ffffdfff x6 : 0000000000000001 [ 177.940866] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff [ 177.947997] x2 : ffffffc010c93240 x1 : ffffff80023624c0 x0 : 0000000000000054 [ 177.955130] Call trace: [ 177.957567] debug_print_object+0xb0/0xf0 [ 177.961570] debug_object_assert_init+0x124/0x178 [ 177.966269] try_to_del_timer_sync+0x1c/0x70 [ 177.970536] del_timer_sync+0x30/0x50 [ 177.974192] ath11k_peer_frags_flush+0x34/0x68 [ath11k] [ 177.979439] ath11k_mac_op_set_key+0x1e4/0x338 [ath11k] [ 177.984673] ieee80211_key_enable_hw_accel+0xc8/0x3d0 [ 177.989722] ieee80211_key_replace+0x360/0x740 [ 177.994160] ieee80211_key_link+0x16c/0x210 [ 177.998337] ieee80211_add_key+0x138/0x338 [ 178.002426] nl80211_new_key+0xfc/0x258 [ 178.006257] genl_family_rcv_msg_doit.isra.17+0xd8/0x120 [ 178.011565] genl_rcv_msg+0xd8/0x1c8 [ 178.015134] netlink_rcv_skb+0x38/0xf8 [ 178.018877] genl_rcv+0x34/0x48 [ 178.022012] netlink_unicast+0x174/0x230 [ 178.025928] netlink_sendmsg+0x188/0x388 [ 178.029845] ____sys_sendmsg+0x218/0x250 [ 178.033763] ___sys_sendmsg+0x68/0x90 [ 178.037418] __sys_sendmsg+0x44/0x88 [ 178.040988] __arm64_sys_sendmsg+0x20/0x28 [ 178.045077] invoke_syscall.constprop.5+0x54/0xe0 [ 178.049776] do_el0_svc+0x74/0xc0 [ 178.053084] el0_svc+0x10/0x18 [ 178.056133] el0t_64_sync_handler+0x88/0xb0 [ 178.060310] el0t_64_sync+0x148/0x14c [ 178.063966] ---[ end trace 8a5cf0bf9d34a058 ]--- Add changes to not to delete frag timer for peers during group key installation. Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01092-QCAHKSWPL_SILICONZ-1 Fixes: c3944a5 ("ath11k: Clear the fragment cache during key install") Signed-off-by: Rameshkumar Sundaram <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Mar 7, 2022
When bringing down the netdevice or system shutdown, a panic can be
triggered while accessing the sysfs path because the device is already
removed.
[ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called
[ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called
...
[ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280
crash> bt
...
PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd"
...
#9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778
[exception RIP: dma_pool_alloc+0x1ab]
RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046
RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000
RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090
RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00
R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0
R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core]
#11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core]
#12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core]
#13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core]
#14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core]
#15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core]
#16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core]
#17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46
#18 [ffff89240e1a3d48] speed_show at ffffffff8f277208
#19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3
#20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf
#21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596
#22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10
#23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5
#24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff
#25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f
#26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92
crash> net_device.state ffff89443b0c0000
state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER)
To prevent this scenario, we also make sure that the netdevice is present.
Signed-off-by: suresh kumar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Mar 16, 2022
[ Upstream commit 4224cfd ] When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Apr 19, 2022
…ATE_QUEUED [ Upstream commit fbe04b4 ] If the callback 'start_streaming' fails, then all queued buffers in the driver should be returned with state 'VB2_BUF_STATE_QUEUED'. Currently, they are returned with 'VB2_BUF_STATE_ERROR' which is wrong. Fix this. This also fixes the warning: [ 65.583633] WARNING: CPU: 5 PID: 593 at drivers/media/common/videobuf2/videobuf2-core.c:1612 vb2_start_streaming+0xd4/0x160 [videobuf2_common] [ 65.585027] Modules linked in: snd_usb_audio snd_hwdep snd_usbmidi_lib snd_rawmidi snd_soc_hdmi_codec dw_hdmi_i2s_audio saa7115 stk1160 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc crct10dif_ce panfrost snd_soc_simple_card snd_soc_audio_graph_card snd_soc_spdif_tx snd_soc_simple_card_utils gpu_sched phy_rockchip_pcie snd_soc_rockchip_i2s rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi cec drm_kms_helper drm rtc_rk808 rockchip_saradc industrialio_triggered_buffer kfifo_buf rockchip_thermal pcie_rockchip_host ip_tables x_tables ipv6 [ 65.589383] CPU: 5 PID: 593 Comm: v4l2src0:src Tainted: G W 5.16.0-rc4-62408-g32447129cb30-dirty #14 [ 65.590293] Hardware name: Radxa ROCK Pi 4B (DT) [ 65.590696] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 65.591304] pc : vb2_start_streaming+0xd4/0x160 [videobuf2_common] [ 65.591850] lr : vb2_start_streaming+0x6c/0x160 [videobuf2_common] [ 65.592395] sp : ffff800012bc3ad0 [ 65.592685] x29: ffff800012bc3ad0 x28: 0000000000000000 x27: ffff800012bc3cd8 [ 65.593312] x26: 0000000000000000 x25: ffff00000d8a7800 x24: 0000000040045612 [ 65.593938] x23: ffff800011323000 x22: ffff800012bc3cd8 x21: ffff00000908a8b0 [ 65.594562] x20: ffff00000908a8c8 x19: 00000000fffffff4 x18: ffffffffffffffff [ 65.595188] x17: 000000040044ffff x16: 00400034b5503510 x15: ffff800011323f78 [ 65.595813] x14: ffff000013163886 x13: ffff000013163885 x12: 00000000000002ce [ 65.596439] x11: 0000000000000028 x10: 0000000000000001 x9 : 0000000000000228 [ 65.597064] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff726c5e78 [ 65.597690] x5 : ffff800012bc3990 x4 : 0000000000000000 x3 : ffff000009a34880 [ 65.598315] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000007cd99f0 [ 65.598940] Call trace: [ 65.599155] vb2_start_streaming+0xd4/0x160 [videobuf2_common] [ 65.599672] vb2_core_streamon+0x17c/0x1a8 [videobuf2_common] [ 65.600179] vb2_streamon+0x54/0x88 [videobuf2_v4l2] [ 65.600619] vb2_ioctl_streamon+0x54/0x60 [videobuf2_v4l2] [ 65.601103] v4l_streamon+0x3c/0x50 [videodev] [ 65.601521] __video_do_ioctl+0x1a4/0x428 [videodev] [ 65.601977] video_usercopy+0x320/0x828 [videodev] [ 65.602419] video_ioctl2+0x3c/0x58 [videodev] [ 65.602830] v4l2_ioctl+0x60/0x90 [videodev] [ 65.603227] __arm64_sys_ioctl+0xa8/0xe0 [ 65.603576] invoke_syscall+0x54/0x118 [ 65.603911] el0_svc_common.constprop.3+0x84/0x100 [ 65.604332] do_el0_svc+0x34/0xa0 [ 65.604625] el0_svc+0x1c/0x50 [ 65.604897] el0t_64_sync_handler+0x88/0xb0 [ 65.605264] el0t_64_sync+0x16c/0x170 [ 65.605587] ---[ end trace 578e0ba07742170d ]--- Fixes: 8ac4564 ("[media] stk1160: Stop device and unqueue buffers when start_streaming() fails") Signed-off-by: Dafna Hirschfeld <[email protected]> Reviewed-by: Ezequiel Garcia <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Apr 19, 2022
[ Upstream commit fe2640b ] In remove_phb_dynamic() we use &phb->io_resource, after we've called device_unregister(&host_bridge->dev). But the unregister may have freed phb, because pcibios_free_controller_deferred() is the release function for the host_bridge. If there are no outstanding references when we call device_unregister() then phb will be freed out from under us. This has gone mainly unnoticed, but with slub_debug and page_poison enabled it can lead to a crash: PID: 7574 TASK: c0000000d492cb80 CPU: 13 COMMAND: "drmgr" #0 [c0000000e4f075a0] crash_kexec at c00000000027d7dc #1 [c0000000e4f075d0] oops_end at c000000000029608 #2 [c0000000e4f07650] __bad_page_fault at c0000000000904b4 #3 [c0000000e4f076c0] do_bad_slb_fault at c00000000009a5a8 #4 [c0000000e4f076f0] data_access_slb_common_virt at c000000000008b30 Data SLB Access [380] exception frame: R0: c000000000167250 R1: c0000000e4f07a00 R2: c000000002a46100 R3: c000000002b39ce8 R4: 00000000000000c0 R5: 00000000000000a9 R6: 3894674d000000c0 R7: 0000000000000000 R8: 00000000000000ff R9: 0000000000000100 R10: 6b6b6b6b6b6b6b6b R11: 0000000000008000 R12: c00000000023da80 R13: c0000009ffd38b00 R14: 0000000000000000 R15: 000000011c87f0f0 R16: 0000000000000006 R17: 0000000000000003 R18: 0000000000000002 R19: 0000000000000004 R20: 0000000000000005 R21: 000000011c87ede8 R22: 000000011c87c5a8 R23: 000000011c87d3a0 R24: 0000000000000000 R25: 0000000000000001 R26: c0000000e4f07cc8 R27: c00000004d1cc400 R28: c0080000031d00e8 R29: c00000004d23d800 R30: c00000004d1d2400 R31: c00000004d1d2540 NIP: c000000000167258 MSR: 8000000000009033 OR3: c000000000e9f474 CTR: 0000000000000000 LR: c000000000167250 XER: 0000000020040003 CCR: 0000000024088420 MQ: 0000000000000000 DAR: 6b6b6b6b6b6b6ba3 DSISR: c0000000e4f07920 Syscall Result: fffffffffffffff2 [NIP : release_resource+56] [LR : release_resource+48] #5 [c0000000e4f07a00] release_resource at c000000000167258 (unreliable) #6 [c0000000e4f07a30] remove_phb_dynamic at c000000000105648 #7 [c0000000e4f07ab0] dlpar_remove_slot at c0080000031a09e8 [rpadlpar_io] #8 [c0000000e4f07b50] remove_slot_store at c0080000031a0b9c [rpadlpar_io] #9 [c0000000e4f07be0] kobj_attr_store at c000000000817d8c #10 [c0000000e4f07c00] sysfs_kf_write at c00000000063e504 #11 [c0000000e4f07c20] kernfs_fop_write_iter at c00000000063d868 #12 [c0000000e4f07c70] new_sync_write at c00000000054339c #13 [c0000000e4f07d10] vfs_write at c000000000546624 #14 [c0000000e4f07d60] ksys_write at c0000000005469f4 #15 [c0000000e4f07db0] system_call_exception at c000000000030840 #16 [c0000000e4f07e10] system_call_vectored_common at c00000000000c168 To avoid it, we can take a reference to the host_bridge->dev until we're done using phb. Then when we drop the reference the phb will be freed. Fixes: 2dd9c11 ("powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)") Reported-by: David Dai <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Tested-by: Sachin Sant <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Aug 3, 2022
Change net device's MTU to smaller than IPV6_MIN_MTU or unregister device while matching route. That may trigger null-ptr-deref bug for ip6_ptr probability as following. ========================================================= BUG: KASAN: null-ptr-deref in find_match.part.0+0x70/0x134 Read of size 4 at addr 0000000000000308 by task ping6/263 CPU: 2 PID: 263 Comm: ping6 Not tainted 5.19.0-rc7+ #14 Call trace: dump_backtrace+0x1a8/0x230 show_stack+0x20/0x70 dump_stack_lvl+0x68/0x84 print_report+0xc4/0x120 kasan_report+0x84/0x120 __asan_load4+0x94/0xd0 find_match.part.0+0x70/0x134 __find_rr_leaf+0x408/0x470 fib6_table_lookup+0x264/0x540 ip6_pol_route+0xf4/0x260 ip6_pol_route_output+0x58/0x70 fib6_rule_lookup+0x1a8/0x330 ip6_route_output_flags_noref+0xd8/0x1a0 ip6_route_output_flags+0x58/0x160 ip6_dst_lookup_tail+0x5b4/0x85c ip6_dst_lookup_flow+0x98/0x120 rawv6_sendmsg+0x49c/0xc70 inet_sendmsg+0x68/0x94 Reproducer as following: Firstly, prepare conditions: $ip netns add ns1 $ip netns add ns2 $ip link add veth1 type veth peer name veth2 $ip link set veth1 netns ns1 $ip link set veth2 netns ns2 $ip netns exec ns1 ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1 $ip netns exec ns2 ip -6 addr add 2001:0db8:0:f101::2/64 dev veth2 $ip netns exec ns1 ifconfig veth1 up $ip netns exec ns2 ifconfig veth2 up $ip netns exec ns1 ip -6 route add 2000::/64 dev veth1 metric 1 $ip netns exec ns2 ip -6 route add 2001::/64 dev veth2 metric 1 Secondly, execute the following two commands in two ssh windows respectively: $ip netns exec ns1 sh $while true; do ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1; ip -6 route add 2000::/64 dev veth1 metric 1; ping6 2000::2; done $ip netns exec ns1 sh $while true; do ip link set veth1 mtu 1000; ip link set veth1 mtu 1500; sleep 5; done It is because ip6_ptr has been assigned to NULL in addrconf_ifdown() firstly, then ip6_ignore_linkdown() accesses ip6_ptr directly without NULL check. cpu0 cpu1 fib6_table_lookup __find_rr_leaf addrconf_notify [ NETDEV_CHANGEMTU ] addrconf_ifdown RCU_INIT_POINTER(dev->ip6_ptr, NULL) find_match ip6_ignore_linkdown So we can add NULL check for ip6_ptr before using in ip6_ignore_linkdown() to fix the null-ptr-deref bug. Fixes: dcd1f57 ("net/ipv6: Remove fib6_idev") Signed-off-by: Ziyang Xuan <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Jun 20, 2023
The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Jun 20, 2023
Currently, the per cpu upcall counters are allocated after the vport is created and inserted into the system. This could lead to the datapath accessing the counters before they are allocated resulting in a kernel Oops. Here is an example: PID: 59693 TASK: ffff0005f4f51500 CPU: 0 COMMAND: "ovs-vswitchd" #0 [ffff80000a39b5b0] __switch_to at ffffb70f0629f2f4 #1 [ffff80000a39b5d0] __schedule at ffffb70f0629f5cc #2 [ffff80000a39b650] preempt_schedule_common at ffffb70f0629fa60 #3 [ffff80000a39b670] dynamic_might_resched at ffffb70f0629fb58 #4 [ffff80000a39b680] mutex_lock_killable at ffffb70f062a1388 #5 [ffff80000a39b6a0] pcpu_alloc at ffffb70f0594460c #6 [ffff80000a39b750] __alloc_percpu_gfp at ffffb70f05944e68 #7 [ffff80000a39b760] ovs_vport_cmd_new at ffffb70ee6961b90 [openvswitch] ... PID: 58682 TASK: ffff0005b2f0bf00 CPU: 0 COMMAND: "kworker/0:3" #0 [ffff80000a5d2f40] machine_kexec at ffffb70f056a0758 #1 [ffff80000a5d2f70] __crash_kexec at ffffb70f057e2994 #2 [ffff80000a5d3100] crash_kexec at ffffb70f057e2ad8 #3 [ffff80000a5d3120] die at ffffb70f0628234c #4 [ffff80000a5d31e0] die_kernel_fault at ffffb70f062828a8 #5 [ffff80000a5d3210] __do_kernel_fault at ffffb70f056a31f4 #6 [ffff80000a5d3240] do_bad_area at ffffb70f056a32a4 #7 [ffff80000a5d3260] do_translation_fault at ffffb70f062a9710 #8 [ffff80000a5d3270] do_mem_abort at ffffb70f056a2f74 #9 [ffff80000a5d32a0] el1_abort at ffffb70f06297dac #10 [ffff80000a5d32d0] el1h_64_sync_handler at ffffb70f06299b24 #11 [ffff80000a5d3410] el1h_64_sync at ffffb70f056812dc #12 [ffff80000a5d3430] ovs_dp_upcall at ffffb70ee6963c84 [openvswitch] #13 [ffff80000a5d3470] ovs_dp_process_packet at ffffb70ee6963fdc [openvswitch] #14 [ffff80000a5d34f0] ovs_vport_receive at ffffb70ee6972c78 [openvswitch] #15 [ffff80000a5d36f0] netdev_port_receive at ffffb70ee6973948 [openvswitch] #16 [ffff80000a5d3720] netdev_frame_hook at ffffb70ee6973a28 [openvswitch] #17 [ffff80000a5d3730] __netif_receive_skb_core.constprop.0 at ffffb70f06079f90 We moved the per cpu upcall counter allocation to the existing vport alloc and free functions to solve this. Fixes: 95637d9 ("net: openvswitch: release vport resources on failure") Fixes: 1933ea3 ("net: openvswitch: Add support to count upcall packets") Signed-off-by: Eelco Chaudron <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Aaron Conole <[email protected]> Signed-off-by: David S. Miller <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Aug 7, 2023
The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] #16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9f ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Sep 26, 2023
commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Cc: [email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Oct 13, 2023
Fix an error detected by memory sanitizer:
```
==4033==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6
#1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2
#2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9
#3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32
#4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6
#5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8
#6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8
#7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9
#8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8
#9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15
#10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9
#11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8
#12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5
#13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9
#14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11
#15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8
#16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2
#17 0x55fb0f941dab in main tools/perf/perf.c:535:3
```
Fixes: 7b723db ("perf pmu: Be lazy about loading event info files from sysfs")
Signed-off-by: Ian Rogers <[email protected]>
Cc: James Clark <[email protected]>
Cc: Kan Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Oct 13, 2023
The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Dec 11, 2023
When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/[email protected] Suggested-by: "Ismail, Mustafa" <[email protected]> Signed-off-by: Shifeng Li <[email protected]> Reviewed-by: Shiraz Saleem <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Mar 23, 2024
Make arch_kunwind_consume_entry() as __always_inline otherwise the compiler might not inline it and allow attaching probes to it. Without this, just probing arch_kunwind_consume_entry() via <tracefs>/kprobe_events will crash the kernel on arm64. The crash can be reproduced using the following compiler and kernel combination: clang version 19.0.0git (https://github.com/llvm/llvm-project.git d68d29516102252f6bf6dc23fb22cef144ca1cb3) commit 87adede ("Merge tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") [root@localhost ~]# echo 'p arch_kunwind_consume_entry' > /sys/kernel/debug/tracing/kprobe_events [root@localhost ~]# echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable Modules linked in: aes_ce_blk aes_ce_cipher ghash_ce sha2_ce virtio_net sha256_arm64 sha1_ce arm_smccc_trng net_failover failover virtio_mmio uio_pdrv_genirq uio sch_fq_codel dm_mod dax configfs CPU: 3 PID: 1405 Comm: bash Not tainted 6.8.0-rc6+ #14 Hardware name: linux,dummy-virt (DT) pstate: 604003c5 (nZCv DAIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kprobe_breakpoint_handler+0x17c/0x258 lr : kprobe_breakpoint_handler+0x17c/0x258 sp : ffff800085d6ab60 x29: ffff800085d6ab60 x28: ffff0000066f0040 x27: ffff0000066f0b20 x26: ffff800081fa7b0c x25: 0000000000000002 x24: ffff00000b29bd18 x23: ffff00007904c590 x22: ffff800081fa6590 x21: ffff800081fa6588 x20: ffff00000b29bd18 x19: ffff800085d6ac40 x18: 0000000000000079 x17: 0000000000000001 x16: ffffffffffffffff x15: 0000000000000004 x14: ffff80008277a940 x13: 0000000000000003 x12: 0000000000000003 x11: 00000000fffeffff x10: c0000000fffeffff x9 : aa95616fdf80cc00 x8 : aa95616fdf80cc00 x7 : 205d343137373231 x6 : ffff800080fb48ec x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff800085d6a910 x0 : 0000000000000079 Call trace: kprobes: Failed to recover from reentered kprobes. kprobes: Dump kprobe: .symbol_name = arch_kunwind_consume_entry, .offset = 0, .addr = arch_kunwind_consume_entry+0x0/0x40 ------------[ cut here ]------------ kernel BUG at arch/arm64/kernel/probes/kprobes.c:241! kprobes: Failed to recover from reentered kprobes. kprobes: Dump kprobe: .symbol_name = arch_kunwind_consume_entry, .offset = 0, .addr = arch_kunwind_consume_entry+0x0/0x40 Fixes: 1aba06e ("arm64: stacktrace: factor out kunwind_stack_walk()") Signed-off-by: Puranjay Mohan <[email protected]> Reviewed-by: Mark Rutland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Apr 29, 2024
The rehash delayed work migrates filters from one region to another.
This is done by iterating over all chunks (all the filters with the same
priority) in the region and in each chunk iterating over all the
filters.
If the migration fails, the code tries to migrate the filters back to
the old region. However, the rollback itself can also fail in which case
another migration will be erroneously performed. Besides the fact that
this ping pong is not a very good idea, it also creates a problem.
Each virtual chunk references two chunks: The currently used one
('vchunk->chunk') and a backup ('vchunk->chunk2'). During migration the
first holds the chunk we want to migrate filters to and the second holds
the chunk we are migrating filters from.
The code currently assumes - but does not verify - that the backup chunk
does not exist (NULL) if the currently used chunk does not reference the
target region. This assumption breaks when we are trying to rollback a
rollback, resulting in the backup chunk being overwritten and leaked
[1].
Fix by not rolling back a failed rollback and add a warning to avoid
future cases.
[1]
WARNING: CPU: 5 PID: 1063 at lib/parman.c:291 parman_destroy+0x17/0x20
Modules linked in:
CPU: 5 PID: 1063 Comm: kworker/5:11 Tainted: G W 6.9.0-rc2-custom-00784-gc6a05c468a0b #14
Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019
Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work
RIP: 0010:parman_destroy+0x17/0x20
[...]
Call Trace:
<TASK>
mlxsw_sp_acl_atcam_region_fini+0x19/0x60
mlxsw_sp_acl_tcam_region_destroy+0x49/0xf0
mlxsw_sp_acl_tcam_vregion_rehash_work+0x1f1/0x470
process_one_work+0x151/0x370
worker_thread+0x2cb/0x3e0
kthread+0xd0/0x100
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
Fixes: 8435005 ("mlxsw: spectrum_acl: Do rollback as another call to mlxsw_sp_acl_tcam_vchunk_migrate_all()")
Signed-off-by: Ido Schimmel <[email protected]>
Tested-by: Alexander Zubkov <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/d5edd4f4503934186ae5cfe268503b16345b4e0f.1713797103.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Sep 25, 2024
A sysfs reader can race with a device reset or removal, attempting to
read device state when the device is not actually present. eg:
[exception RIP: qed_get_current_link+17]
#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede]
#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3
#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4
#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300
#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c
#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b
#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3
#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1
#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f
#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb
crash> struct net_device.state ffff9a9d21336000
state = 5,
state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100).
The device is not present, note lack of __LINK_STATE_PRESENT (0b10).
This is the same sort of panic as observed in commit 4224cfd
("net-sysfs: add check for netdevice being present to speed_show").
There are many other callers of __ethtool_get_link_ksettings() which
don't have a device presence check.
Move this check into ethtool to protect all callers.
Fixes: d519e17 ("net: export device speed and duplex via sysfs")
Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show")
Signed-off-by: Jamie Bainbridge <[email protected]>
Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
I had a second look at the sfctemp driver and to me it seems a little excessive to do temperature conversions every 4ms.