config: first attempt to enable jh7100 #2
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
|
@esmil booting successfully after replacing the kernel in fedora rootfs and the eth0 is working fine without link down. |
Closed
esmil
force-pushed
the
starlight
branch
2 times, most recently
from
060f811
to
5ef2cd6
Compare
[ Upstream commit ee6ddf5 ] Running an rcuscale stress-suite can lead to "Out of memory" of a system. This can happen under high memory pressure with a small amount of physical memory. For example, a KVM test configuration with 64 CPUs and 512 megabytes can result in OOM when running rcuscale with below parameters: ../kvm.sh --torture rcuscale --allcpus --duration 10 --kconfig CONFIG_NR_CPUS=64 \ --bootargs "rcuscale.kfree_rcu_test=1 rcuscale.kfree_nthreads=16 rcuscale.holdoff=20 \ rcuscale.kfree_loops=10000 torture.disable_onoff_at_boot" --trust-make <snip> [ 12.054448] kworker/1:1H invoked oom-killer: gfp_mask=0x2cc0(GFP_KERNEL|__GFP_NOWARN), order=0, oom_score_adj=0 [ 12.055303] CPU: 1 PID: 377 Comm: kworker/1:1H Not tainted 5.11.0-rc3+ torvalds#510 [ 12.055416] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-1 04/01/2014 [ 12.056485] Workqueue: events_highpri fill_page_cache_func [ 12.056485] Call Trace: [ 12.056485] dump_stack+0x57/0x6a [ 12.056485] dump_header+0x4c/0x30a [ 12.056485] ? del_timer_sync+0x20/0x30 [ 12.056485] out_of_memory.cold.47+0xa/0x7e [ 12.056485] __alloc_pages_slowpath.constprop.123+0x82f/0xc00 [ 12.056485] __alloc_pages_nodemask+0x289/0x2c0 [ 12.056485] __get_free_pages+0x8/0x30 [ 12.056485] fill_page_cache_func+0x39/0xb0 [ 12.056485] process_one_work+0x1ed/0x3b0 [ 12.056485] ? process_one_work+0x3b0/0x3b0 [ 12.060485] worker_thread+0x28/0x3c0 [ 12.060485] ? process_one_work+0x3b0/0x3b0 [ 12.060485] kthread+0x138/0x160 [ 12.060485] ? kthread_park+0x80/0x80 [ 12.060485] ret_from_fork+0x22/0x30 [ 12.062156] Mem-Info: [ 12.062350] active_anon:0 inactive_anon:0 isolated_anon:0 [ 12.062350] active_file:0 inactive_file:0 isolated_file:0 [ 12.062350] unevictable:0 dirty:0 writeback:0 [ 12.062350] slab_reclaimable:2797 slab_unreclaimable:80920 [ 12.062350] mapped:1 shmem:2 pagetables:8 bounce:0 [ 12.062350] free:10488 free_pcp:1227 free_cma:0 ... [ 12.101610] Out of memory and no killable processes... [ 12.102042] Kernel panic - not syncing: System is deadlocked on memory [ 12.102583] CPU: 1 PID: 377 Comm: kworker/1:1H Not tainted 5.11.0-rc3+ torvalds#510 [ 12.102600] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-1 04/01/2014 <snip> Because kvfree_rcu() has a fallback path, memory allocation failure is not the end of the world. Furthermore, the added overhead of aggressive GFP settings must be balanced against the overhead of the fallback path, which is a cache miss for double-argument kvfree_rcu() and a call to synchronize_rcu() for single-argument kvfree_rcu(). The current choice of GFP_KERNEL|__GFP_NOWARN can result in longer latencies than a call to synchronize_rcu(), so less-tenacious GFP flags would be helpful. Here is the tradeoff that must be balanced: a) Minimize use of the fallback path, b) Avoid pushing the system into OOM, c) Bound allocation latency to that of synchronize_rcu(), and d) Leave the emergency reserves to use cases lacking fallbacks. This commit therefore changes GFP flags from GFP_KERNEL|__GFP_NOWARN to GFP_KERNEL|__GFP_NORETRY|__GFP_NOMEMALLOC|__GFP_NOWARN. This combination leaves the emergency reserves alone and can initiate reclaim, but will not invoke the OOM killer. Signed-off-by: Uladzislau Rezki (Sony) <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 377f833 ] virtio_gpu_object array is not freed or unlocked in some failed cases. Signed-off-by: xndcn <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Gerd Hoffmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit fd48c05 ] This fixes a compilation warning in pscsi_complete_cmd(): drivers/target/target_core_pscsi.c: In function ‘pscsi_complete_cmd’: drivers/target/target_core_pscsi.c:624:5: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ; /* XXX: TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE */ Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 28c7afb ] It's best if this condition is reported. Signed-off-by: Sean Young <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 24df8b7 ] When STA2X11_VIP is enabled, and GPIOLIB is disabled, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for VIDEO_ADV7180 Depends on [n]: MEDIA_SUPPORT [=y] && GPIOLIB [=n] && VIDEO_V4L2 [=y] && I2C [=y] Selected by [y]: - STA2X11_VIP [=y] && MEDIA_SUPPORT [=y] && MEDIA_PCI_SUPPORT [=y] && MEDIA_CAMERA_SUPPORT [=y] && PCI [=y] && VIDEO_V4L2 [=y] && VIRT_TO_BUS [=y] && I2C [=y] && (STA2X11 [=n] || COMPILE_TEST [=y]) && MEDIA_SUBDRV_AUTOSELECT [=y] This is because STA2X11_VIP selects VIDEO_ADV7180 without selecting or depending on GPIOLIB, despite VIDEO_ADV7180 depending on GPIOLIB. Signed-off-by: Julian Braha <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 9c39be4 ] syzbot reported memory leak in zr364xx_probe()[1]. The problem was in invalid error handling order. All error conditions rigth after v4l2_ctrl_handler_init() must call v4l2_ctrl_handler_free(). Reported-by: [email protected] Signed-off-by: Pavel Skripkin <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 5f864cf ] The folowing AMD IOMMU are affected by the RiSC engine stall, requiring a reset to maintain continual operation. After being added to the broken_dev_id list the systems are functional long term. 0x1481 is the PCI ID for the IOMMU found on Starship/Matisse 0x1419 is the PCI ID for the IOMMU found on 15h (Models 10h-1fh) family 0x5a23 is the PCI ID for the IOMMU found on RD890S/RD990 Signed-off-by: Brad Love <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit cc271b6 ] The correct return code to report an invalid pipeline configuration is -EPIPE. Return it instead of -EINVAL from __capture_legacy_try_fmt() when the capture format doesn't match the media bus format of the connected subdev. Signed-off-by: Laurent Pinchart <[email protected]> Reviewed-by: Rui Miguel Silva <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 1f6c45a ] In practice, IA_CSS_PIPE_ID_NUM should never be used when calling atomisp_q_video_buffers_to_css(), as the driver should discover the right pipe before calling it. Yet, if some pipe parsing issue happens, it could end using it. So, add a WARN_ON() to prevent such case. Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit c4d57c2 ] On all newer bq27xxx ICs, the AveragePower register contains a signed value; in addition to handling the raw value as unsigned, the driver code also didn't convert it to µW as expected. At least for the BQ28Z610, the reference manual incorrectly states that the value is in units of 1mW and not 10mW. I have no way of knowing whether the manuals of other supported ICs contain the same error, or if there are models that actually use 1mW. At least, the new code shouldn't be *less* correct than the old version for any device. power_avg is removed from the cache structure, se we don't have to extend it to store both a signed value and an error code. Always getting an up-to-date value may be desirable anyways, as it avoids inconsistent current and power readings when switching between charging and discharging. Signed-off-by: Matthias Schiffer <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
…has been unplugged [ Upstream commit c309a3e ] When the jack is partially inserted and then removed again it may be removed while the hpdet code is running. In this case the following may happen: 1. The "JACKDET rise" or ""JACKDET fall" IRQ triggers 2. arizona_jackdet runs and takes info->lock 3. The "HPDET" IRQ triggers 4. arizona_hpdet_irq runs, blocks on info->lock 5. arizona_jackdet calls arizona_stop_mic() and clears info->hpdet_done 6. arizona_jackdet releases info->lock 7. arizona_hpdet_irq now can continue running and: 7.1 Calls arizona_start_mic() (if a mic was detected) 7.2 sets info->hpdet_done Step 7 is undesirable / a bug: 7.1 causes the device to stay in a high power-state (with MICVDD enabled) 7.2 causes hpdet to not run on the next jack insertion, which in turn causes the EXTCON_JACK_HEADPHONE state to never get set This fixes both issues by skipping these 2 steps when arizona_hpdet_irq runs after the jack has been unplugged. Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Acked-by: Charles Keepax <[email protected]> Tested-by: Charles Keepax <[email protected]> Acked-by: Chanwoo Choi <[email protected]> Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit e5b499f ] We must free/disable all interrupts and cancel all pending works before doing further cleanup. Before this commit arizona_extcon_remove() was doing several register writes to shut things down before disabling the IRQs and it was cancelling only 1 of the 3 different works used. Move all the register-writes shutting things down to after the disabling of the IRQs and add the 2 missing cancel_delayed_work_sync() calls. This fixes various possible races on driver unbind. One of which would always trigger on devices using the mic-clamp feature for jack detection. The ARIZONA_MICD_CLAMP_MODE_MASK update was done before disabling the IRQs, causing: 1. arizona_jackdet() to run 2. detect a jack being inserted (clamp disabled means jack inserted) 3. call arizona_start_mic() which: 3.1 Enables the MICVDD regulator 3.2 takes a pm_runtime_reference And this was all happening after the ARIZONA_MICD_ENA bit clearing, which would undo 3.1 and 3.2 because the ARIZONA_MICD_CLAMP_MODE_MASK update was being done after the ARIZONA_MICD_ENA bit clearing. So this means that arizona_extcon_remove() would exit with 1. MICVDD enabled and 2. The pm_runtime_reference being unbalanced. MICVDD still being enabled caused the following oops when the regulator is released by the devm framework: [ 2850.745757] ------------[ cut here ]------------ [ 2850.745827] WARNING: CPU: 2 PID: 2098 at drivers/regulator/core.c:2123 _regulator_put.part.0+0x19f/0x1b0 [ 2850.745835] Modules linked in: extcon_arizona ... ... [ 2850.746909] Call Trace: [ 2850.746932] regulator_put+0x2d/0x40 [ 2850.746946] release_nodes+0x22a/0x260 [ 2850.746984] __device_release_driver+0x190/0x240 [ 2850.747002] driver_detach+0xd4/0x120 ... [ 2850.747337] ---[ end trace f455dfd7abd9781f ]--- Note this oops is just one of various theoretically possible races caused by the wrong ordering inside arizona_extcon_remove(), this fixes the ordering fixing all possible races, including the reported oops. Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Acked-by: Charles Keepax <[email protected]> Tested-by: Charles Keepax <[email protected]> Acked-by: Chanwoo Choi <[email protected]> Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 08b1cf4 ] Commit aaaa93e ("media] media: venus: venc: add video encoder files") is the last in a series of three commits to add core.c vdec.c and venc.c adding core, encoder and decoder. The encoder and decoder check for core drvdata as set and return -EPROBE_DEFER if it has not been set, however both the encoder and decoder rely on core.v4l2_dev as valid. core.v4l2_dev will not be valid until v4l2_device_register() has completed in core.c's probe(). Normally this is never seen however, Dmitry reported the following backtrace when compiling drivers and firmware directly into a kernel image. [ 5.259968] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) [ 5.269850] sd 0:0:0:3: [sdd] Optimal transfer size 524288 bytes [ 5.275505] Workqueue: events deferred_probe_work_func [ 5.275513] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 5.441211] usb 2-1: new SuperSpeedPlus Gen 2 USB device number 2 using xhci-hcd [ 5.442486] pc : refcount_warn_saturate+0x140/0x148 [ 5.493756] hub 2-1:1.0: USB hub found [ 5.496266] lr : refcount_warn_saturate+0x140/0x148 [ 5.500982] hub 2-1:1.0: 4 ports detected [ 5.503440] sp : ffff80001067b730 [ 5.503442] x29: ffff80001067b730 [ 5.592660] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 5.598478] x28: ffff6c6bc1c379b8 [ 5.598480] x27: ffffa5c673852960 x26: ffffa5c673852000 [ 5.598484] x25: ffff6c6bc1c37800 x24: 0000000000000001 [ 5.810652] x23: 0000000000000000 x22: ffffa5c673bc7118 [ 5.813777] hub 1-1:1.0: USB hub found [ 5.816108] x21: ffffa5c674440000 x20: 0000000000000001 [ 5.820846] hub 1-1:1.0: 4 ports detected [ 5.825415] x19: ffffa5c6744f4000 x18: ffffffffffffffff [ 5.825418] x17: 0000000000000000 x16: 0000000000000000 [ 5.825421] x15: 00000a4810c193ba x14: 0000000000000000 [ 5.825424] x13: 00000000000002b8 x12: 000000000000f20a [ 5.825427] x11: 000000000000f20a x10: 0000000000000038 [ 5.845447] usb 2-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd [ 5.845904] [ 5.845905] x9 : 0000000000000000 x8 : ffff6c6d36fae780 [ 5.871208] x7 : ffff6c6d36faf240 x6 : 0000000000000000 [ 5.876664] x5 : 0000000000000004 x4 : 0000000000000085 [ 5.882121] x3 : 0000000000000119 x2 : ffffa5c6741ef478 [ 5.887578] x1 : 3acbb3926faf5f00 x0 : 0000000000000000 [ 5.893036] Call trace: [ 5.895551] refcount_warn_saturate+0x140/0x148 [ 5.900202] __video_register_device+0x64c/0xd10 [ 5.904944] venc_probe+0xc4/0x148 [ 5.908444] platform_probe+0x68/0xe0 [ 5.912210] really_probe+0x118/0x3e0 [ 5.915977] driver_probe_device+0x5c/0xc0 [ 5.920187] __device_attach_driver+0x98/0xb8 [ 5.924661] bus_for_each_drv+0x68/0xd0 [ 5.928604] __device_attach+0xec/0x148 [ 5.932547] device_initial_probe+0x14/0x20 [ 5.936845] bus_probe_device+0x9c/0xa8 [ 5.940788] device_add+0x3e8/0x7c8 [ 5.944376] of_device_add+0x4c/0x60 [ 5.948056] of_platform_device_create_pdata+0xbc/0x140 [ 5.953425] of_platform_bus_create+0x17c/0x3c0 [ 5.958078] of_platform_populate+0x80/0x110 [ 5.962463] venus_probe+0x2ec/0x4d8 [ 5.966143] platform_probe+0x68/0xe0 [ 5.969907] really_probe+0x118/0x3e0 [ 5.973674] driver_probe_device+0x5c/0xc0 [ 5.977882] __device_attach_driver+0x98/0xb8 [ 5.982356] bus_for_each_drv+0x68/0xd0 [ 5.986298] __device_attach+0xec/0x148 [ 5.990242] device_initial_probe+0x14/0x20 [ 5.994539] bus_probe_device+0x9c/0xa8 [ 5.998481] deferred_probe_work_func+0x74/0xb0 [ 6.003132] process_one_work+0x1e8/0x360 [ 6.007254] worker_thread+0x208/0x478 [ 6.011106] kthread+0x150/0x158 [ 6.014431] ret_from_fork+0x10/0x30 [ 6.018111] ---[ end trace f074246b1ecdb466 ]--- This patch fixes by - Only setting drvdata after v4l2_device_register() completes - Moving v4l2_device_register() so that suspend/reume in core::probe() stays as-is - Changes pm_ops->core_function() to take struct venus_core not struct device - Minimal rework of v4l2_device_*register in probe/remove Reported-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bryan O'Donoghue <[email protected]> Signed-off-by: Stanimir Varbanov <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 396c100 ] We are spending way too much effort on qdio-internal bookkeeping for QAOB management & caching, and it's still not robust. Once qdio's TX path has detached the QAOB from a PENDING buffer, we lost all track of it until it shows up in a CQ notification again. So if the device is torn down before that notification arrives, we leak the QAOB. Just have the driver take care of it, and simply pass down a QAOB if they want a TX with async-completion capability. For a buffer in PENDING state that requires the QAOB for final completion, qeth can now also try to recycle the buffer's QAOB rather than unconditionally freeing it. This also eliminates the qdio_outbuf_state array, which was only needed to transfer the aob->user1 tag from the driver to the qdio layer. Signed-off-by: Julian Wiedmann <[email protected]> Acked-by: Benjamin Block <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit c759b29 ] Add a fix for the memory leak bugs that can occur when the saa7164_encoder_register() function fails. The function allocates memory without explicitly freeing it when errors occur. Add a better error handling that deallocate the unused buffers before the function exits during a fail. Signed-off-by: Daniel Niv <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit eaaea46 ] act_len can be uninitialized if usb_bulk_msg() returns an error. Set it to 0 to avoid a KMSAN error. Signed-off-by: Hans Verkuil <[email protected]> Reported-by: [email protected] Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit ea1611b ] The V4L2_CID_STATELESS_FWHT_PARAMS compound control was missing a proper initialization of the flags field, so after loading the vicodec module for the first time, running v4l2-compliance for the stateless decoder would fail on this control because the initial control value was considered invalid by the vicodec driver. Initializing the flags field to sane values fixes this. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 2469b83 ] Fixes coccicheck error: drivers/power/supply/pm2301_charger.c:1089:7-27: ERROR: drivers/power/supply/lp8788-charger.c:502:8-28: ERROR: drivers/power/supply/tps65217_charger.c:239:8-33: ERROR: drivers/power/supply/tps65090-charger.c:303:8-33: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Signed-off-by: dongjian <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit cdfd4c6 ] WLED3_SINK_REG_SYNC is, as the name implies, a sink register offset. Therefore, use the sink address as base instead of the ctrl address. This fixes the sync toggle on wled4, which can be observed by the fact that adjusting brightness now works. It has no effect on wled3 because sink and ctrl base addresses are the same. This allows adjusting the brightness without having to disable then reenable the module. Signed-off-by: Obeida Shamoun <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Marijn Suijten <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Acked-by: Kiran Gunda <[email protected]> Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 4d6e9cd ] Currently, for WLED5, the FSC (Full scale current) setting is not updated properly due to driver toggling the wrong register after an FSC update. On WLED5 we should only toggle the MOD_SYNC bit after a brightness update. For an FSC update we need to toggle the SYNC bits instead. Fix it by adopting the common wled3_sync_toggle() for WLED5 and introducing new code to the brightness update path to compensate. Signed-off-by: Kiran Gunda <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit b672cb1 ] If xnack is on, VM retry fault interrupt send to IH ring1, and ring1 will be full quickly. IH cannot receive other interrupts, this causes deadlock if migrating buffer using sdma and waiting for sdma done while handling retry fault. Remove VMC from IH storm client, enable ring1 write pointer overflow, then IH will drop retry fault interrupts and be able to receive other interrupts while driver is handling retry fault. IH ring1 write pointer doesn't writeback to memory by IH, and ring1 write pointer recorded by self-irq is not updated, so always read the latest ring1 write pointer from register. Signed-off-by: Philip Yang <[email protected]> Signed-off-by: Felix Kuehling <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 9a9c59a ] By default this timestamp is 32 bit counter. It gets overflowed in around 10 minutes. Signed-off-by: Alex Sierra <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 4ac5617 ] The psp supplies the link type in the upper 2 bits of the psp xgmi node information num_hops field. With a new link type, Aldebaran has these bits set to a non-zero value (1 = xGMI3) so the KFD topology will report the incorrect IO link weights without proper masking. The actual number of hops is located in the 3 least significant bits of this field so mask if off accordingly before passing it to the KFD. Signed-off-by: Jonathan Kim <[email protected]> Reviewed-by: Amber Lin <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 50e2fc3 ] If get_num_sdma_queues or get_num_xgmi_sdma_queues is 0, we end up doing a shift operation where the number of bits shifted equals number of bits in the operand. This behaviour is undefined. Set num_sdma_queues or num_xgmi_sdma_queues to ULLONG_MAX, if the count is >= number of bits in the operand. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1472 Reported-by: Lyude Paul <[email protected]> Signed-off-by: Anson Jacob <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Tested-by: Lyude Paul <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Dec 26, 2023
With the current bandwidth allocation we end up reserving too much for the USB 3.x and PCIe tunnels that leads to reduced capabilities for the second DisplayPort tunnel. Fix this by decreasing the USB 3.x allocation to 900 Mb/s which then allows both tunnels to get the maximum HBR2 bandwidth. This way, the reserved bandwidth for USB 3.x and PCIe, would be 1350 Mb/s (taking weights of USB 3.x and PCIe into account). So bandwidth allocations on a link are: USB 3.x + PCIe tunnels => 1350 Mb/s DisplayPort tunnel #1 => 17280 Mb/s DisplayPort tunnel #2 => 17280 Mb/s Total consumed bandwidth is 35910 Mb/s. So that all the above can be tunneled on a Gen 3 link (which allows maximum of 36000 Mb/s). Fixes: 582e70b ("thunderbolt: Change bandwidth reservations to comply USB4 v2") Signed-off-by: Gil Fine <[email protected]> Signed-off-by: Mika Westerberg <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Dec 26, 2023
Coverity Scan reports the following issue. But it's impossible that mlx5_get_dev_index returns 7 for PF, even if the index is calculated from PCI FUNC ID. So add the checking to make coverity slience. CID 610894 (#2 of 2): Out-of-bounds write (OVERRUN) Overrunning array esw->fdb_table.offloads.peer_miss_rules of 4 8-byte elements at element index 7 (byte offset 63) using index mlx5_get_dev_index(peer_dev) (which evaluates to 7). Fixes: 9bee385 ("net/mlx5: E-switch, refactor FDB miss rule add/remove") Signed-off-by: Jianbo Liu <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Dec 26, 2023
syzbot found a potential circular dependency leading to a deadlock:
-> #3 (&hdev->req_lock){+.+.}-{3:3}:
__mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599
__mutex_lock kernel/locking/mutex.c:732 [inline]
mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784
hci_dev_do_close+0x3f/0x9f net/bluetooth/hci_core.c:551
hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935
rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345
rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274
vfs_write+0x277/0xcf5 fs/read_write.c:594
ksys_write+0x19b/0x2bd fs/read_write.c:650
do_syscall_x64 arch/x86/entry/common.c:55 [inline]
do_syscall_64+0x51/0xba arch/x86/entry/common.c:93
entry_SYSCALL_64_after_hwframe+0x61/0xcb
-> #2 (rfkill_global_mutex){+.+.}-{3:3}:
__mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599
__mutex_lock kernel/locking/mutex.c:732 [inline]
mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784
rfkill_register+0x30/0x7e3 net/rfkill/core.c:1045
hci_register_dev+0x48f/0x96d net/bluetooth/hci_core.c:2622
__vhci_create_device drivers/bluetooth/hci_vhci.c:341 [inline]
vhci_create_device+0x3ad/0x68f drivers/bluetooth/hci_vhci.c:374
vhci_get_user drivers/bluetooth/hci_vhci.c:431 [inline]
vhci_write+0x37b/0x429 drivers/bluetooth/hci_vhci.c:511
call_write_iter include/linux/fs.h:2109 [inline]
new_sync_write fs/read_write.c:509 [inline]
vfs_write+0xaa8/0xcf5 fs/read_write.c:596
ksys_write+0x19b/0x2bd fs/read_write.c:650
do_syscall_x64 arch/x86/entry/common.c:55 [inline]
do_syscall_64+0x51/0xba arch/x86/entry/common.c:93
entry_SYSCALL_64_after_hwframe+0x61/0xcb
-> #1 (&data->open_mutex){+.+.}-{3:3}:
__mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599
__mutex_lock kernel/locking/mutex.c:732 [inline]
mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784
vhci_send_frame+0x68/0x9c drivers/bluetooth/hci_vhci.c:75
hci_send_frame+0x1cc/0x2ff net/bluetooth/hci_core.c:2989
hci_sched_acl_pkt net/bluetooth/hci_core.c:3498 [inline]
hci_sched_acl net/bluetooth/hci_core.c:3583 [inline]
hci_tx_work+0xb94/0x1a60 net/bluetooth/hci_core.c:3654
process_one_work+0x901/0xfb8 kernel/workqueue.c:2310
worker_thread+0xa67/0x1003 kernel/workqueue.c:2457
kthread+0x36a/0x430 kernel/kthread.c:319
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298
-> #0 ((work_completion)(&hdev->tx_work)){+.+.}-{0:0}:
check_prev_add kernel/locking/lockdep.c:3053 [inline]
check_prevs_add kernel/locking/lockdep.c:3172 [inline]
validate_chain kernel/locking/lockdep.c:3787 [inline]
__lock_acquire+0x2d32/0x77fa kernel/locking/lockdep.c:5011
lock_acquire+0x273/0x4d5 kernel/locking/lockdep.c:5622
__flush_work+0xee/0x19f kernel/workqueue.c:3090
hci_dev_close_sync+0x32f/0x1113 net/bluetooth/hci_sync.c:4352
hci_dev_do_close+0x47/0x9f net/bluetooth/hci_core.c:553
hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935
rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345
rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274
vfs_write+0x277/0xcf5 fs/read_write.c:594
ksys_write+0x19b/0x2bd fs/read_write.c:650
do_syscall_x64 arch/x86/entry/common.c:55 [inline]
do_syscall_64+0x51/0xba arch/x86/entry/common.c:93
entry_SYSCALL_64_after_hwframe+0x61/0xcb
This change removes the need for acquiring the open_mutex in
vhci_send_frame, thus eliminating the potential deadlock while
maintaining the required packet ordering.
Fixes: 92d4abd ("Bluetooth: vhci: Fix race when opening vhci device")
Signed-off-by: Ying Hsu <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Dec 26, 2023
Calling led_trigger_register() when attaching a PHY located on an SFP
module potentially (and practically) leads into a deadlock.
Fix this by not calling led_trigger_register() for PHYs localted on SFP
modules as such modules actually never got any LEDs.
======================================================
WARNING: possible circular locking dependency detected
6.7.0-rc4-next-20231208+ #0 Tainted: G O
------------------------------------------------------
kworker/u8:2/43 is trying to acquire lock:
ffffffc08108c4e8 (triggers_list_lock){++++}-{3:3}, at: led_trigger_register+0x4c/0x1a8
but task is already holding lock:
ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&sfp->sm_mutex){+.+.}-{3:3}:
__mutex_lock+0x88/0x7a0
mutex_lock_nested+0x20/0x28
cleanup_module+0x2ae0/0x3120 [sfp]
sfp_register_bus+0x5c/0x9c
sfp_register_socket+0x48/0xd4
cleanup_module+0x271c/0x3120 [sfp]
platform_probe+0x64/0xb8
really_probe+0x17c/0x3c0
__driver_probe_device+0x78/0x164
driver_probe_device+0x3c/0xd4
__driver_attach+0xec/0x1f0
bus_for_each_dev+0x60/0xa0
driver_attach+0x20/0x28
bus_add_driver+0x108/0x208
driver_register+0x5c/0x118
__platform_driver_register+0x24/0x2c
init_module+0x28/0xa7c [sfp]
do_one_initcall+0x70/0x2ec
do_init_module+0x54/0x1e4
load_module+0x1b78/0x1c8c
__do_sys_init_module+0x1bc/0x2cc
__arm64_sys_init_module+0x18/0x20
invoke_syscall.constprop.0+0x4c/0xdc
do_el0_svc+0x3c/0xbc
el0_svc+0x34/0x80
el0t_64_sync_handler+0xf8/0x124
el0t_64_sync+0x150/0x154
-> #2 (rtnl_mutex){+.+.}-{3:3}:
__mutex_lock+0x88/0x7a0
mutex_lock_nested+0x20/0x28
rtnl_lock+0x18/0x20
set_device_name+0x30/0x130
netdev_trig_activate+0x13c/0x1ac
led_trigger_set+0x118/0x234
led_trigger_write+0x104/0x17c
sysfs_kf_bin_write+0x64/0x80
kernfs_fop_write_iter+0x128/0x1b4
vfs_write+0x178/0x2a4
ksys_write+0x58/0xd4
__arm64_sys_write+0x18/0x20
invoke_syscall.constprop.0+0x4c/0xdc
do_el0_svc+0x3c/0xbc
el0_svc+0x34/0x80
el0t_64_sync_handler+0xf8/0x124
el0t_64_sync+0x150/0x154
-> #1 (&led_cdev->trigger_lock){++++}-{3:3}:
down_write+0x4c/0x13c
led_trigger_write+0xf8/0x17c
sysfs_kf_bin_write+0x64/0x80
kernfs_fop_write_iter+0x128/0x1b4
vfs_write+0x178/0x2a4
ksys_write+0x58/0xd4
__arm64_sys_write+0x18/0x20
invoke_syscall.constprop.0+0x4c/0xdc
do_el0_svc+0x3c/0xbc
el0_svc+0x34/0x80
el0t_64_sync_handler+0xf8/0x124
el0t_64_sync+0x150/0x154
-> #0 (triggers_list_lock){++++}-{3:3}:
__lock_acquire+0x12a0/0x2014
lock_acquire+0x100/0x2ac
down_write+0x4c/0x13c
led_trigger_register+0x4c/0x1a8
phy_led_triggers_register+0x9c/0x214
phy_attach_direct+0x154/0x36c
phylink_attach_phy+0x30/0x60
phylink_sfp_connect_phy+0x140/0x510
sfp_add_phy+0x34/0x50
init_module+0x15c/0xa7c [sfp]
cleanup_module+0x1d94/0x3120 [sfp]
cleanup_module+0x2bb4/0x3120 [sfp]
process_one_work+0x1f8/0x4ec
worker_thread+0x1e8/0x3d8
kthread+0x104/0x110
ret_from_fork+0x10/0x20
other info that might help us debug this:
Chain exists of:
triggers_list_lock --> rtnl_mutex --> &sfp->sm_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sfp->sm_mutex);
lock(rtnl_mutex);
lock(&sfp->sm_mutex);
lock(triggers_list_lock);
*** DEADLOCK ***
4 locks held by kworker/u8:2/43:
#0: ffffff80c000f938 ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec
#1: ffffffc08214bde8 ((work_completion)(&(&sfp->timeout)->work)){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec
#2: ffffffc0810902f8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x18/0x20
#3: ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp]
stack backtrace:
CPU: 0 PID: 43 Comm: kworker/u8:2 Tainted: G O 6.7.0-rc4-next-20231208+ #0
Hardware name: Bananapi BPI-R4 (DT)
Workqueue: events_power_efficient cleanup_module [sfp]
Call trace:
dump_backtrace+0xa8/0x10c
show_stack+0x14/0x1c
dump_stack_lvl+0x5c/0xa0
dump_stack+0x14/0x1c
print_circular_bug+0x328/0x430
check_noncircular+0x124/0x134
__lock_acquire+0x12a0/0x2014
lock_acquire+0x100/0x2ac
down_write+0x4c/0x13c
led_trigger_register+0x4c/0x1a8
phy_led_triggers_register+0x9c/0x214
phy_attach_direct+0x154/0x36c
phylink_attach_phy+0x30/0x60
phylink_sfp_connect_phy+0x140/0x510
sfp_add_phy+0x34/0x50
init_module+0x15c/0xa7c [sfp]
cleanup_module+0x1d94/0x3120 [sfp]
cleanup_module+0x2bb4/0x3120 [sfp]
process_one_work+0x1f8/0x4ec
worker_thread+0x1e8/0x3d8
kthread+0x104/0x110
ret_from_fork+0x10/0x20
Signed-off-by: Daniel Golle <[email protected]>
Fixes: 01e5b72 ("net: phy: Add a binding for PHY LEDs")
Link: https://lore.kernel.org/r/102a9dce38bdf00215735d04cd4704458273ad9c.1702339354.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Dec 26, 2023
Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep warning: ============================================ WARNING: possible recursive locking detected 6.7.0-rc5-wt+ torvalds#532 Not tainted -------------------------------------------- sh/92 is trying to acquire lock: c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 but task is already holding lock: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by sh/92: #0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178 #1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284 #2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284 #3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8 #4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c #5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 stack backtrace: CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ torvalds#532 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c __lock_acquire from lock_acquire.part.0+0x124/0x2d0 lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78 _raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100 __irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204 irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4 atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204 irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8 gpio_keys_suspend from dpm_run_callback+0xe4/0x248 dpm_run_callback from __device_suspend+0x234/0x91c __device_suspend from dpm_suspend+0x224/0x43c dpm_suspend from dpm_suspend_start+0x9c/0xa8 dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84 suspend_devices_and_enter from pm_suspend+0x460/0x4e8 pm_suspend from state_store+0x78/0xe4 state_store from kernfs_fop_write_iter+0x1a0/0x284 kernfs_fop_write_iter from vfs_write+0x38c/0x6f4 vfs_write from ksys_write+0xd8/0x178 ksys_write from ret_fast_syscall+0x0/0x1c Exception stack(0xc52b3fa8 to 0xc52b3ff0) 3fa0: 00000004 005a0ae8 00000001 005a0ae8 00000004 00000001 3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190 3fe0: 00000004 b6c61678 aec5a041 aebf1a26 This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever a wake up source configures an IRQ through irq_set_irq_wake, it will lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent" IRQ which will do the same on its own IRQ desc, but since those two locks share the same class, lockdep reports this as an issue. Fix lockdep false positive by setting a different class for parent and children IRQ Fixes: 7761808 ("pinctrl: introduce driver for Atmel PIO4 controller") Signed-off-by: Alexis Lothoré <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Dec 26, 2023
…kernel/git/kvmarm/kvmarm into kvm-master KVM/arm64 fixes for 6.7, part #2 - Ensure a vCPU's redistributor is unregistered from the MMIO bus if vCPU creation fails - Fix building KVM selftests for arm64 from the top-level Makefile
esmil
pushed a commit
that referenced
this pull request
Feb 21, 2024
…o HEAD KVM/riscv changes for 6.8 part #2 - Zbc extension support for Guest/VM - Scalar crypto extensions support for Guest/VM - Vector crypto extensions support for Guest/VM - Zfh[min] extensions support for Guest/VM - Zihintntl extension support for Guest/VM - Zvfh[min] extensions support for Guest/VM - Zfa extension support for Guest/VM
esmil
pushed a commit
that referenced
this pull request
Feb 21, 2024
…triggers I managed to hit following use after free warning recently: [ 2169.711665] ================================================================== [ 2169.714009] BUG: KASAN: slab-use-after-free in __run_timers.part.0+0x179/0x4c0 [ 2169.716293] Write of size 8 at addr ffff88812b326a70 by task swapper/4/0 [ 2169.719022] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 6.8.0-rc2jiri+ #2 [ 2169.720974] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 2169.722457] Call Trace: [ 2169.722756] <IRQ> [ 2169.723024] dump_stack_lvl+0x58/0xb0 [ 2169.723417] print_report+0xc5/0x630 [ 2169.723807] ? __virt_addr_valid+0x126/0x2b0 [ 2169.724268] kasan_report+0xbe/0xf0 [ 2169.724667] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725116] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725570] __run_timers.part.0+0x179/0x4c0 [ 2169.726003] ? call_timer_fn+0x320/0x320 [ 2169.726404] ? lock_downgrade+0x3a0/0x3a0 [ 2169.726820] ? kvm_clock_get_cycles+0x14/0x20 [ 2169.727257] ? ktime_get+0x92/0x150 [ 2169.727630] ? lapic_next_deadline+0x35/0x60 [ 2169.728069] run_timer_softirq+0x40/0x80 [ 2169.728475] __do_softirq+0x1a1/0x509 [ 2169.728866] irq_exit_rcu+0x95/0xc0 [ 2169.729241] sysvec_apic_timer_interrupt+0x6b/0x80 [ 2169.729718] </IRQ> [ 2169.729993] <TASK> [ 2169.730259] asm_sysvec_apic_timer_interrupt+0x16/0x20 [ 2169.730755] RIP: 0010:default_idle+0x13/0x20 [ 2169.731190] Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 9a 7f 1f 02 85 c0 7e 07 0f 00 2d cf 69 43 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 c0 93 04 00 [ 2169.732759] RSP: 0018:ffff888100dbfe10 EFLAGS: 00000242 [ 2169.733264] RAX: 0000000000000001 RBX: ffff888100d9c200 RCX: ffffffff8241bd62 [ 2169.733925] RDX: ffffed109a848b15 RSI: 0000000000000004 RDI: ffffffff8127ac55 [ 2169.734566] RBP: 0000000000000004 R08: 0000000000000000 R09: ffffed109a848b14 [ 2169.735200] R10: ffff8884d42458a3 R11: 000000000000ba7e R12: ffffffff83d7d3a0 [ 2169.735835] R13: 1ffff110201b7fc6 R14: 0000000000000000 R15: ffff888100d9c200 [ 2169.736478] ? ct_kernel_exit.constprop.0+0xa2/0xc0 [ 2169.736954] ? do_idle+0x285/0x290 [ 2169.737323] default_idle_call+0x63/0x90 [ 2169.737730] do_idle+0x285/0x290 [ 2169.738089] ? arch_cpu_idle_exit+0x30/0x30 [ 2169.738511] ? mark_held_locks+0x1a/0x80 [ 2169.738917] ? lockdep_hardirqs_on_prepare+0x12e/0x200 [ 2169.739417] cpu_startup_entry+0x30/0x40 [ 2169.739825] start_secondary+0x19a/0x1c0 [ 2169.740229] ? set_cpu_sibling_map+0xbd0/0xbd0 [ 2169.740673] secondary_startup_64_no_verify+0x15d/0x16b [ 2169.741179] </TASK> [ 2169.741686] Allocated by task 1098: [ 2169.742058] kasan_save_stack+0x1c/0x40 [ 2169.742456] kasan_save_track+0x10/0x30 [ 2169.742852] __kasan_kmalloc+0x83/0x90 [ 2169.743246] mlx5_dpll_probe+0xf5/0x3c0 [mlx5_dpll] [ 2169.743730] auxiliary_bus_probe+0x62/0xb0 [ 2169.744148] really_probe+0x127/0x590 [ 2169.744534] __driver_probe_device+0xd2/0x200 [ 2169.744973] device_driver_attach+0x6b/0xf0 [ 2169.745402] bind_store+0x90/0xe0 [ 2169.745761] kernfs_fop_write_iter+0x1df/0x2a0 [ 2169.746210] vfs_write+0x41f/0x790 [ 2169.746579] ksys_write+0xc7/0x160 [ 2169.746947] do_syscall_64+0x6f/0x140 [ 2169.747333] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 2169.748049] Freed by task 1220: [ 2169.748393] kasan_save_stack+0x1c/0x40 [ 2169.748789] kasan_save_track+0x10/0x30 [ 2169.749188] kasan_save_free_info+0x3b/0x50 [ 2169.749621] poison_slab_object+0x106/0x180 [ 2169.750044] __kasan_slab_free+0x14/0x50 [ 2169.750451] kfree+0x118/0x330 [ 2169.750792] mlx5_dpll_remove+0xf5/0x110 [mlx5_dpll] [ 2169.751271] auxiliary_bus_remove+0x2e/0x40 [ 2169.751694] device_release_driver_internal+0x24b/0x2e0 [ 2169.752191] unbind_store+0xa6/0xb0 [ 2169.752563] kernfs_fop_write_iter+0x1df/0x2a0 [ 2169.753004] vfs_write+0x41f/0x790 [ 2169.753381] ksys_write+0xc7/0x160 [ 2169.753750] do_syscall_64+0x6f/0x140 [ 2169.754132] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 2169.754847] Last potentially related work creation: [ 2169.755315] kasan_save_stack+0x1c/0x40 [ 2169.755709] __kasan_record_aux_stack+0x9b/0xf0 [ 2169.756165] __queue_work+0x382/0x8f0 [ 2169.756552] call_timer_fn+0x126/0x320 [ 2169.756941] __run_timers.part.0+0x2ea/0x4c0 [ 2169.757376] run_timer_softirq+0x40/0x80 [ 2169.757782] __do_softirq+0x1a1/0x509 [ 2169.758387] Second to last potentially related work creation: [ 2169.758924] kasan_save_stack+0x1c/0x40 [ 2169.759322] __kasan_record_aux_stack+0x9b/0xf0 [ 2169.759773] __queue_work+0x382/0x8f0 [ 2169.760156] call_timer_fn+0x126/0x320 [ 2169.760550] __run_timers.part.0+0x2ea/0x4c0 [ 2169.760978] run_timer_softirq+0x40/0x80 [ 2169.761381] __do_softirq+0x1a1/0x509 [ 2169.761998] The buggy address belongs to the object at ffff88812b326a00 which belongs to the cache kmalloc-256 of size 256 [ 2169.763061] The buggy address is located 112 bytes inside of freed 256-byte region [ffff88812b326a00, ffff88812b326b00) [ 2169.764346] The buggy address belongs to the physical page: [ 2169.764866] page:000000000f2b1e89 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12b324 [ 2169.765731] head:000000000f2b1e89 order:2 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 2169.766484] anon flags: 0x200000000000840(slab|head|node=0|zone=2) [ 2169.767048] page_type: 0xffffffff() [ 2169.767422] raw: 0200000000000840 ffff888100042b40 0000000000000000 dead000000000001 [ 2169.768183] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [ 2169.768899] page dumped because: kasan: bad access detected [ 2169.769649] Memory state around the buggy address: [ 2169.770116] ffff88812b326900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.770805] ffff88812b326980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.771485] >ffff88812b326a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2169.772173] ^ [ 2169.772787] ffff88812b326a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2169.773477] ffff88812b326b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.774160] ================================================================== [ 2169.774845] ================================================================== I didn't manage to reproduce it. Though the issue seems to be obvious. There is a chance that the mlx5_dpll_remove() calls cancel_delayed_work() when the work runs and manages to re-arm itself. In that case, after delay timer triggers next attempt to queue it, it works with freed memory. Fix this by using cancel_delayed_work_sync() instead which makes sure that work is done when it returns. Fixes: 496fd0a ("mlx5: Implement SyncE support using DPLL infrastructure") Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Feb 21, 2024
…kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.8, take #2 - Avoid dropping the page refcount twice when freeing an unlinked page-table subtree.
esmil
pushed a commit
that referenced
this pull request
Mar 23, 2024
Hou Tao says: ==================== Fix the read of vsyscall page through bpf From: Hou Tao <[email protected]> Hi, As reported by syzboot [1] and [2], when trying to read vsyscall page by using bpf_probe_read_kernel() or bpf_probe_read(), oops may happen. Thomas Gleixner had proposed a test patch [3], but it seems that no formal patch is posted after about one month [4], so I post it instead and add an Originally-by tag in patch #2. Patch #1 makes is_vsyscall_vaddr() being a common helper. Patch #2 fixes the problem by disallowing vsyscall page read for copy_from_kernel_nofault(). Patch #3 adds one test case to ensure the read of vsyscall page through bpf is rejected. Please see individual patches for more details. Comments are always welcome. [1]: https://lore.kernel.org/bpf/CAG48ez06TZft=ATH1qh2c5mpS5BT8UakwNkzi6nvK5_djC-4Nw@mail.gmail.com/ [2]: https://lore.kernel.org/bpf/CABOYnLynjBoFZOf3Z4BhaZkc5hx_kHfsjiW+UWLoB=w33LvScw@mail.gmail.com/ [3]: https://lore.kernel.org/bpf/87r0jwquhv.ffs@tglx/ [4]: https://lore.kernel.org/bpf/[email protected]/ Change Log: v3: * rephrase commit message for patch #1 & #2 (Sohil) * reword comments in copy_from_kernel_nofault_allowed() (Sohil) * add Rvb tag for patch #1 and Acked-by tag for patch #3 (Sohil, Yonghong) v2: https://lore.kernel.org/bpf/[email protected]/ * move is_vsyscall_vaddr to asm/vsyscall.h instead (Sohil) * elaborate on the reason for disallowing of vsyscall page read in copy_from_kernel_nofault_allowed() (Sohil) * update the commit message of patch #2 to more clearly explain how the oops occurs. (Sohil) * update the commit message of patch #3 to explain the expected return values of various bpf helpers (Yonghong) v1: https://lore.kernel.org/bpf/[email protected]/ ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Mar 23, 2024
With parameters CONFIG_RISCV_PMU_LEGACY=y and CONFIG_RISCV_PMU_SBI=n linux kernel crashes when you try perf record: $ perf record ls [ 46.749286] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 46.750199] Oops [#1] [ 46.750342] Modules linked in: [ 46.750608] CPU: 0 PID: 107 Comm: perf-exec Not tainted 6.6.0 #2 [ 46.750906] Hardware name: riscv-virtio,qemu (DT) [ 46.751184] epc : 0x0 [ 46.751430] ra : arch_perf_update_userpage+0x54/0x13e [ 46.751680] epc : 0000000000000000 ra : ffffffff8072ee52 sp : ff2000000022b8f0 [ 46.751958] gp : ffffffff81505988 tp : ff6000000290d400 t0 : ff2000000022b9c0 [ 46.752229] t1 : 0000000000000001 t2 : 0000000000000003 s0 : ff2000000022b930 [ 46.752451] s1 : ff600000028fb000 a0 : 0000000000000000 a1 : ff600000028fb000 [ 46.752673] a2 : 0000000ae2751268 a3 : 00000000004fb708 a4 : 0000000000000004 [ 46.752895] a5 : 0000000000000000 a6 : 000000000017ffe3 a7 : 00000000000000d2 [ 46.753117] s2 : ff600000028fb000 s3 : 0000000ae2751268 s4 : 0000000000000000 [ 46.753338] s5 : ffffffff8153e290 s6 : ff600000863b9000 s7 : ff60000002961078 [ 46.753562] s8 : ff60000002961048 s9 : ff60000002961058 s10: 0000000000000001 [ 46.753783] s11: 0000000000000018 t3 : ffffffffffffffff t4 : ffffffffffffffff [ 46.754005] t5 : ff6000000292270c t6 : ff2000000022bb30 [ 46.754179] status: 0000000200000100 badaddr: 0000000000000000 cause: 000000000000000c [ 46.754653] Code: Unable to access instruction at 0xffffffffffffffec. [ 46.754939] ---[ end trace 0000000000000000 ]--- [ 46.755131] note: perf-exec[107] exited with irqs disabled [ 46.755546] note: perf-exec[107] exited with preempt_count 4 This happens because in the legacy case the ctr_get_width function was not defined, but it is used in arch_perf_update_userpage. Also remove extra check in riscv_pmu_ctr_get_width_mask Signed-off-by: Vadim Shakirov <[email protected]> Reviewed-by: Alexandre Ghiti <[email protected]> Reviewed-by: Atish Patra <[email protected]> Fixes: cc4c07c ("drivers: perf: Implement perf event mmap support in the SBI backend") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Mar 23, 2024
…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net Patch #1 restores NFPROTO_INET with nft_compat, from Ignat Korchagin. Patch #2 fixes an issue with bridge netfilter and broadcast/multicast packets. There is a day 0 bug in br_netfilter when used with connection tracking. Conntrack assumes that an nf_conn structure that is not yet added to hash table ("unconfirmed"), is only visible by the current cpu that is processing the sk_buff. For bridge this isn't true, sk_buff can get cloned in between, and clones can be processed in parallel on different cpu. This patch disables NAT and conntrack helpers for multicast packets. Patch #3 adds a selftest to cover for the br_netfilter bug. netfilter pull request 24-02-29 * tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: netfilter: add bridge conntrack + multicast test case netfilter: bridge: confirm multicast packets before passing them up the stack netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate() ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Mar 23, 2024
Eduard Zingerman says: ==================== check bpf_func_state->callback_depth when pruning states This patch-set fixes bug in states pruning logic hit in mailing list discussion [0]. The details of the fix are in patch #1. The main idea for the fix belongs to Yonghong Song, mine contribution is merely in review and test cases. There are some changes in verification performance: File Program Insns (DIFF) States (DIFF) ------------------------- ------------- --------------- -------------- pyperf600_bpf_loop.bpf.o on_event +15 (+0.42%) +0 (+0.00%) strobemeta_bpf_loop.bpf.o on_event +857 (+37.95%) +60 (+38.96%) xdp_synproxy_kern.bpf.o syncookie_tc +2892 (+30.39%) +109 (+36.33%) xdp_synproxy_kern.bpf.o syncookie_xdp +2892 (+30.01%) +109 (+36.09%) (when tested on a subset of selftests identified by selftests/bpf/veristat.cfg and Cilium bpf object files from [4]) Changelog: v2 [2] -> v3: - fixes for verifier.c commit message as suggested by Yonghong; - patch-set re-rerouted to 'bpf' tree as suggested in [2]; - patch for test_tcp_custom_syncookie is sent separately to 'bpf-next' [3]. - veristat results updated using 'bpf' tree as baseline and clang 16. v1 [1] -> v2: - patch #2 commit message updated to better reflect verifier behavior with regards to checkpoints tree (suggested by Yonghong); - veristat results added (suggested by Andrii). [0] https://lore.kernel.org/bpf/[email protected]/ [1] https://lore.kernel.org/bpf/[email protected]/ [2] https://lore.kernel.org/bpf/[email protected]/ [3] https://lore.kernel.org/bpf/[email protected]/ [4] https://github.com/anakryiko/cilium ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Mar 23, 2024
…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains fixes for net: Patch #1 disallows anonymous sets with timeout, except for dynamic sets. Anonymous sets with timeouts using the pipapo set backend makes no sense from userspace perspective. Patch #2 rejects constant sets with timeout which has no practical usecase. This kind of set, once bound, contains elements that expire but no new elements can be added. Patch #3 restores custom conntrack expectations with NFPROTO_INET, from Florian Westphal. Patch #4 marks rhashtable anonymous set with timeout as dead from the commit path to avoid that async GC collects these elements. Rules that refers to the anonymous set get released with no mutex held from the commit path. Patch #5 fixes a UBSAN shift overflow in H.323 conntrack helper, from Lena Wang. netfilter pull request 24-03-07 * tag 'nf-24-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_conntrack_h323: Add protection for bmp length out of range netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout netfilter: nft_ct: fix l3num expectations with inet pseudo family netfilter: nf_tables: reject constant set with timeout netfilter: nf_tables: disallow anonymous set with timeout flag ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Apr 29, 2024
Petr Machata says: ==================== mlxsw: Fixes This patchset fixes the following issues: - During driver de-initialization the driver unregisters the EMAD response trap by setting its action to DISCARD. However the manual only permits TRAP and FORWARD, and future firmware versions will enforce this. In patch #1, suppress the error message by aligning the driver to the manual and use a FORWARD (NOP) action when unregistering the trap. - The driver queries the Management Capabilities Mask (MCAM) register during initialization to understand if certain features are supported. However, not all firmware versions support this register, leading to the driver failing to load. Patches #2 and #3 fix this issue by treating an error in the register query as an indication that the feature is not supported. v2: - Patch #2: - Make mlxsw_env_max_module_eeprom_len_query() void ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Apr 29, 2024
… update The rule activity update delayed work periodically traverses the list of configured rules and queries their activity from the device. As part of this task it accesses the entry pointed by 'ventry->entry', but this entry can be changed concurrently by the rehash delayed work, leading to a use-after-free [1]. Fix by closing the race and perform the activity query under the 'vregion->lock' mutex. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140 Read of size 8 at addr ffff8881054ed808 by task kworker/0:18/181 CPU: 0 PID: 181 Comm: kworker/0:18 Not tainted 6.9.0-rc2-custom-00781-gd5ab772d32f7 #2 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_rule_activity_update_work Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140 mlxsw_sp_acl_rule_activity_update_work+0x219/0x400 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1039: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc+0x19c/0x360 mlxsw_sp_acl_tcam_entry_create+0x7b/0x1f0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x30d/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Freed by task 1039: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x14/0x30 kfree+0xc1/0x290 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x3d7/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Fixes: 2bffc53 ("mlxsw: spectrum_acl: Don't take mutex in mlxsw_sp_acl_tcam_vregion_rehash_work()") Signed-off-by: Ido Schimmel <[email protected]> Tested-by: Alexander Zubkov <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/1fcce0a60b231ebeb2515d91022284ba7b4ffe7a.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Apr 29, 2024
9f74a3d ("ice: Fix VF Reset paths when interface in a failed over aggregate"), the ice driver has acquired the LAG mutex in ice_reset_vf(). The commit placed this lock acquisition just prior to the acquisition of the VF configuration lock. If ice_reset_vf() acquires the configuration lock via the ICE_VF_RESET_LOCK flag, this could deadlock with ice_vc_cfg_qs_msg() because it always acquires the locks in the order of the VF configuration lock and then the LAG mutex. Lockdep reports this violation almost immediately on creating and then removing 2 VF: ====================================================== WARNING: possible circular locking dependency detected 6.8.0-rc6 torvalds#54 Tainted: G W O ------------------------------------------------------ kworker/60:3/6771 is trying to acquire lock: ff40d43e099380a0 (&vf->cfg_lock){+.+.}-{3:3}, at: ice_reset_vf+0x22f/0x4d0 [ice] but task is already holding lock: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&pf->lag_mutex){+.+.}-{3:3}: __lock_acquire+0x4f8/0xb40 lock_acquire+0xd4/0x2d0 __mutex_lock+0x9b/0xbf0 ice_vc_cfg_qs_msg+0x45/0x690 [ice] ice_vc_process_vf_msg+0x4f5/0x870 [ice] __ice_clean_ctrlq+0x2b5/0x600 [ice] ice_service_task+0x2c9/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 kthread+0x104/0x140 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1b/0x30 -> #0 (&vf->cfg_lock){+.+.}-{3:3}: check_prev_add+0xe2/0xc50 validate_chain+0x558/0x800 __lock_acquire+0x4f8/0xb40 lock_acquire+0xd4/0x2d0 __mutex_lock+0x9b/0xbf0 ice_reset_vf+0x22f/0x4d0 [ice] ice_process_vflr_event+0x98/0xd0 [ice] ice_service_task+0x1cc/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 kthread+0x104/0x140 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1b/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&pf->lag_mutex); lock(&vf->cfg_lock); lock(&pf->lag_mutex); lock(&vf->cfg_lock); *** DEADLOCK *** 4 locks held by kworker/60:3/6771: #0: ff40d43e05428b38 ((wq_completion)ice){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0 #1: ff50d06e05197e58 ((work_completion)(&pf->serv_task)){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0 #2: ff40d43ea1960e50 (&pf->vfs.table_lock){+.+.}-{3:3}, at: ice_process_vflr_event+0x48/0xd0 [ice] #3: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice] stack backtrace: CPU: 60 PID: 6771 Comm: kworker/60:3 Tainted: G W O 6.8.0-rc6 torvalds#54 Hardware name: Workqueue: ice ice_service_task [ice] Call Trace: <TASK> dump_stack_lvl+0x4a/0x80 check_noncircular+0x12d/0x150 check_prev_add+0xe2/0xc50 ? save_trace+0x59/0x230 ? add_chain_cache+0x109/0x450 validate_chain+0x558/0x800 __lock_acquire+0x4f8/0xb40 ? lockdep_hardirqs_on+0x7d/0x100 lock_acquire+0xd4/0x2d0 ? ice_reset_vf+0x22f/0x4d0 [ice] ? lock_is_held_type+0xc7/0x120 __mutex_lock+0x9b/0xbf0 ? ice_reset_vf+0x22f/0x4d0 [ice] ? ice_reset_vf+0x22f/0x4d0 [ice] ? rcu_is_watching+0x11/0x50 ? ice_reset_vf+0x22f/0x4d0 [ice] ice_reset_vf+0x22f/0x4d0 [ice] ? process_one_work+0x176/0x4d0 ice_process_vflr_event+0x98/0xd0 [ice] ice_service_task+0x1cc/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0x104/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> To avoid deadlock, we must acquire the LAG mutex only after acquiring the VF configuration lock. Fix the ice_reset_vf() to acquire the LAG mutex only after we either acquire or check that the VF configuration lock is held. Fixes: 9f74a3d ("ice: Fix VF Reset paths when interface in a failed over aggregate") Signed-off-by: Jacob Keller <[email protected]> Reviewed-by: Dave Ertman <[email protected]> Reviewed-by: Mateusz Polchlopek <[email protected]> Tested-by: Przemek Kitszel <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Apr 29, 2024
…nix_gc().
syzbot reported a lockdep splat regarding unix_gc_lock and
unix_state_lock().
One is called from recvmsg() for a connected socket, and another
is called from GC for TCP_LISTEN socket.
So, the splat is false-positive.
Let's add a dedicated lock class for the latter to suppress the splat.
Note that this change is not necessary for net-next.git as the issue
is only applied to the old GC impl.
[0]:
WARNING: possible circular locking dependency detected
6.9.0-rc5-syzkaller-00007-g4d2008430ce8 #0 Not tainted
-----------------------------------------------------
kworker/u8:1/11 is trying to acquire lock:
ffff88807cea4e70 (&u->lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
ffff88807cea4e70 (&u->lock){+.+.}-{2:2}, at: __unix_gc+0x40e/0xf70 net/unix/garbage.c:302
but task is already holding lock:
ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: __unix_gc+0x117/0xf70 net/unix/garbage.c:261
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (unix_gc_lock){+.+.}-{2:2}:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:351 [inline]
unix_notinflight+0x13d/0x390 net/unix/garbage.c:140
unix_detach_fds net/unix/af_unix.c:1819 [inline]
unix_destruct_scm+0x221/0x350 net/unix/af_unix.c:1876
skb_release_head_state+0x100/0x250 net/core/skbuff.c:1188
skb_release_all net/core/skbuff.c:1200 [inline]
__kfree_skb net/core/skbuff.c:1216 [inline]
kfree_skb_reason+0x16d/0x3b0 net/core/skbuff.c:1252
kfree_skb include/linux/skbuff.h:1262 [inline]
manage_oob net/unix/af_unix.c:2672 [inline]
unix_stream_read_generic+0x1125/0x2700 net/unix/af_unix.c:2749
unix_stream_splice_read+0x239/0x320 net/unix/af_unix.c:2981
do_splice_read fs/splice.c:985 [inline]
splice_file_to_pipe+0x299/0x500 fs/splice.c:1295
do_splice+0xf2d/0x1880 fs/splice.c:1379
__do_splice fs/splice.c:1436 [inline]
__do_sys_splice fs/splice.c:1652 [inline]
__se_sys_splice+0x331/0x4a0 fs/splice.c:1634
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (&u->lock){+.+.}-{2:2}:
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869
__lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:351 [inline]
__unix_gc+0x40e/0xf70 net/unix/garbage.c:302
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0xa10/0x17c0 kernel/workqueue.c:3335
worker_thread+0x86d/0xd70 kernel/workqueue.c:3416
kthread+0x2f0/0x390 kernel/kthread.c:388
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(unix_gc_lock);
lock(&u->lock);
lock(unix_gc_lock);
lock(&u->lock);
*** DEADLOCK ***
3 locks held by kworker/u8:1/11:
#0: ffff888015089148 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3229 [inline]
#0: ffff888015089148 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_scheduled_works+0x8e0/0x17c0 kernel/workqueue.c:3335
#1: ffffc90000107d00 (unix_gc_work){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3230 [inline]
#1: ffffc90000107d00 (unix_gc_work){+.+.}-{0:0}, at: process_scheduled_works+0x91b/0x17c0 kernel/workqueue.c:3335
#2: ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
#2: ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: __unix_gc+0x117/0xf70 net/unix/garbage.c:261
stack backtrace:
CPU: 0 PID: 11 Comm: kworker/u8:1 Not tainted 6.9.0-rc5-syzkaller-00007-g4d2008430ce8 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Workqueue: events_unbound __unix_gc
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2187
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869
__lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:351 [inline]
__unix_gc+0x40e/0xf70 net/unix/garbage.c:302
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0xa10/0x17c0 kernel/workqueue.c:3335
worker_thread+0x86d/0xd70 kernel/workqueue.c:3416
kthread+0x2f0/0x390 kernel/kthread.c:388
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Fixes: 47d8ac0 ("af_unix: Fix garbage collector racing against connect()")
Reported-and-tested-by: [email protected]
Closes: https://syzkaller.appspot.com/bug?extid=fa379358c28cc87cc307
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Apr 29, 2024
…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains two Netfilter/IPVS fixes for net: Patch #1 fixes SCTP checksumming for IPVS with gso packets, from Ismael Luceno. Patch #2 honor dormant flag from netdev event path to fix a possible double hook unregistration. * tag 'nf-24-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: honor table dormant flag from netdev release event path ipvs: Fix checksumming on GSO of SCTP packets ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
esmil
pushed a commit
that referenced
this pull request
May 6, 2024
Lockdep detects a possible deadlock as listed below. This is because it
detects the IA55 interrupt controller .irq_eoi() API is called from
interrupt context while configuration-specific API (e.g., .irq_enable())
could be called from process context on resume path (by calling
rzg2l_gpio_irq_restore()). To avoid this, protect the call of
rzg2l_gpio_irq_enable() with spin_lock_irqsave()/spin_unlock_irqrestore().
With this the same approach that is available in __setup_irq() is mimicked
to pinctrl IRQ resume function.
Below is the lockdep report:
WARNING: inconsistent lock state
6.8.0-rc5-next-20240219-arm64-renesas-00030-gb17a289abf1f torvalds#90 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
str_rwdt_t_001./159 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff00000b001d70 (&rzg2l_irqc_data->lock){?...}-{2:2}, at: rzg2l_irqc_irq_enable+0x60/0xa4
{IN-HARDIRQ-W} state was registered at:
lock_acquire+0x1e0/0x310
_raw_spin_lock+0x44/0x58
rzg2l_irqc_eoi+0x2c/0x130
irq_chip_eoi_parent+0x18/0x20
rzg2l_gpio_irqc_eoi+0xc/0x14
handle_fasteoi_irq+0x134/0x230
generic_handle_domain_irq+0x28/0x3c
gic_handle_irq+0x4c/0xbc
call_on_irq_stack+0x24/0x34
do_interrupt_handler+0x78/0x7c
el1_interrupt+0x30/0x5c
el1h_64_irq_handler+0x14/0x1c
el1h_64_irq+0x64/0x68
_raw_spin_unlock_irqrestore+0x34/0x70
__setup_irq+0x4d4/0x6b8
request_threaded_irq+0xe8/0x1a0
request_any_context_irq+0x60/0xb8
devm_request_any_context_irq+0x74/0x104
gpio_keys_probe+0x374/0xb08
platform_probe+0x64/0xcc
really_probe+0x140/0x2ac
__driver_probe_device+0x74/0x124
driver_probe_device+0x3c/0x15c
__driver_attach+0xec/0x1c4
bus_for_each_dev+0x70/0xcc
driver_attach+0x20/0x28
bus_add_driver+0xdc/0x1d0
driver_register+0x5c/0x118
__platform_driver_register+0x24/0x2c
gpio_keys_init+0x18/0x20
do_one_initcall+0x70/0x290
kernel_init_freeable+0x294/0x504
kernel_init+0x20/0x1cc
ret_from_fork+0x10/0x20
irq event stamp: 69071
hardirqs last enabled at (69071): [<ffff800080e0dafc>] _raw_spin_unlock_irqrestore+0x6c/0x70
hardirqs last disabled at (69070): [<ffff800080e0cfec>] _raw_spin_lock_irqsave+0x7c/0x80
softirqs last enabled at (67654): [<ffff800080010614>] __do_softirq+0x494/0x4dc
softirqs last disabled at (67645): [<ffff800080015238>] ____do_softirq+0xc/0x14
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&rzg2l_irqc_data->lock);
<Interrupt>
lock(&rzg2l_irqc_data->lock);
*** DEADLOCK ***
4 locks held by str_rwdt_t_001./159:
#0: ffff00000b10f3f0 (sb_writers#4){.+.+}-{0:0}, at: vfs_write+0x1a4/0x35c
#1: ffff00000e43ba88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xe8/0x1a8
#2: ffff00000aa21dc8 (kn->active#40){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xf0/0x1a8
#3: ffff80008179d970 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x9c/0x278
stack backtrace:
CPU: 0 PID: 159 Comm: str_rwdt_t_001. Not tainted 6.8.0-rc5-next-20240219-arm64-renesas-00030-gb17a289abf1f torvalds#90
Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT)
Call trace:
dump_backtrace+0x94/0xe8
show_stack+0x14/0x1c
dump_stack_lvl+0x88/0xc4
dump_stack+0x14/0x1c
print_usage_bug.part.0+0x294/0x348
mark_lock+0x6b0/0x948
__lock_acquire+0x750/0x20b0
lock_acquire+0x1e0/0x310
_raw_spin_lock+0x44/0x58
rzg2l_irqc_irq_enable+0x60/0xa4
irq_chip_enable_parent+0x1c/0x34
rzg2l_gpio_irq_enable+0xc4/0xd8
rzg2l_pinctrl_resume_noirq+0x4cc/0x520
pm_generic_resume_noirq+0x28/0x3c
genpd_finish_resume+0xc0/0xdc
genpd_resume_noirq+0x14/0x1c
dpm_run_callback+0x34/0x90
device_resume_noirq+0xa8/0x268
dpm_noirq_resume_devices+0x13c/0x160
dpm_resume_noirq+0xc/0x1c
suspend_devices_and_enter+0x2c8/0x570
pm_suspend+0x1ac/0x278
state_store+0x88/0x124
kobj_attr_store+0x14/0x24
sysfs_kf_write+0x48/0x6c
kernfs_fop_write_iter+0x118/0x1a8
vfs_write+0x270/0x35c
ksys_write+0x64/0xec
__arm64_sys_write+0x18/0x20
invoke_syscall+0x44/0x108
el0_svc_common.constprop.0+0xb4/0xd4
do_el0_svc+0x18/0x20
el0_svc+0x3c/0xb8
el0t_64_sync_handler+0xb8/0xbc
el0t_64_sync+0x14c/0x150
Fixes: 254203f ("pinctrl: renesas: rzg2l: Add suspend/resume support")
Signed-off-by: Claudiu Beznea <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
esmil
pushed a commit
that referenced
this pull request
May 6, 2024
…active The default nna (node_nr_active) is used when the pool isn't tied to a specific NUMA node. This can happen in the following cases: 1. On NUMA, if per-node pwq init failure and the fallback pwq is used. 2. On NUMA, if a pool is configured to span multiple nodes. 3. On single node setups. 5797b1c ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues") set the default nna->max to min_active because only #1 was being considered. For #2 and #3, using min_active means that the max concurrency in normal operation is pushed down to min_active which is currently 8, which can obviously lead to performance issues. exact value nna->max is set to doesn't really matter. #2 can only happen if the workqueue is intentionally configured to ignore NUMA boundaries and there's no good way to distribute max_active in this case. #3 is the default behavior on single node machines. Let's set it the default nna->max to max_active. This fixes the artificially lowered concurrency problem on single node machines and shouldn't hurt anything for other cases. Signed-off-by: Tejun Heo <[email protected]> Reported-by: Shinichiro Kawasaki <[email protected]> Fixes: 5797b1c ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues") Link: https://lore.kernel.org/dm-devel/[email protected]/ Signed-off-by: Tejun Heo <[email protected]>
esmil
pushed a commit
that referenced
this pull request
May 6, 2024
One of my CI runs popped the following lockdep splat ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc4+ #1 Not tainted ------------------------------------------------------ btrfs/471533 is trying to acquire lock: ffff92ba46980850 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_quota_disable+0x54/0x4c0 but task is already holding lock: ffff92ba46980bd0 (&fs_info->subvol_sem){++++}-{3:3}, at: btrfs_ioctl+0x1c8f/0x2600 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&fs_info->subvol_sem){++++}-{3:3}: down_read+0x42/0x170 btrfs_rename+0x607/0xb00 btrfs_rename2+0x2e/0x70 vfs_rename+0xaf8/0xfc0 do_renameat2+0x586/0x600 __x64_sys_rename+0x43/0x50 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&sb->s_type->i_mutex_key#16){++++}-{3:3}: down_write+0x3f/0xc0 btrfs_inode_lock+0x40/0x70 prealloc_file_extent_cluster+0x1b0/0x370 relocate_file_extent_cluster+0xb2/0x720 relocate_data_extent+0x107/0x160 relocate_block_group+0x442/0x550 btrfs_relocate_block_group+0x2cb/0x4b0 btrfs_relocate_chunk+0x50/0x1b0 btrfs_balance+0x92f/0x13d0 btrfs_ioctl+0x1abf/0x2600 __x64_sys_ioctl+0x97/0xd0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&fs_info->cleaner_mutex){+.+.}-{3:3}: __lock_acquire+0x13e7/0x2180 lock_acquire+0xcb/0x2e0 __mutex_lock+0xbe/0xc00 btrfs_quota_disable+0x54/0x4c0 btrfs_ioctl+0x206b/0x2600 __x64_sys_ioctl+0x97/0xd0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: &fs_info->cleaner_mutex --> &sb->s_type->i_mutex_key#16 --> &fs_info->subvol_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->subvol_sem); lock(&sb->s_type->i_mutex_key#16); lock(&fs_info->subvol_sem); lock(&fs_info->cleaner_mutex); *** DEADLOCK *** 2 locks held by btrfs/471533: #0: ffff92ba4319e420 (sb_writers#14){.+.+}-{0:0}, at: btrfs_ioctl+0x3b5/0x2600 #1: ffff92ba46980bd0 (&fs_info->subvol_sem){++++}-{3:3}, at: btrfs_ioctl+0x1c8f/0x2600 stack backtrace: CPU: 1 PID: 471533 Comm: btrfs Kdump: loaded Not tainted 6.9.0-rc4+ #1 Call Trace: <TASK> dump_stack_lvl+0x77/0xb0 check_noncircular+0x148/0x160 ? lock_acquire+0xcb/0x2e0 __lock_acquire+0x13e7/0x2180 lock_acquire+0xcb/0x2e0 ? btrfs_quota_disable+0x54/0x4c0 ? lock_is_held_type+0x9a/0x110 __mutex_lock+0xbe/0xc00 ? btrfs_quota_disable+0x54/0x4c0 ? srso_return_thunk+0x5/0x5f ? lock_acquire+0xcb/0x2e0 ? btrfs_quota_disable+0x54/0x4c0 ? btrfs_quota_disable+0x54/0x4c0 btrfs_quota_disable+0x54/0x4c0 btrfs_ioctl+0x206b/0x2600 ? srso_return_thunk+0x5/0x5f ? __do_sys_statfs+0x61/0x70 __x64_sys_ioctl+0x97/0xd0 do_syscall_64+0x95/0x180 ? srso_return_thunk+0x5/0x5f ? reacquire_held_locks+0xd1/0x1f0 ? do_user_addr_fault+0x307/0x8a0 ? srso_return_thunk+0x5/0x5f ? lock_acquire+0xcb/0x2e0 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? find_held_lock+0x2b/0x80 ? srso_return_thunk+0x5/0x5f ? lock_release+0xca/0x2a0 ? srso_return_thunk+0x5/0x5f ? do_user_addr_fault+0x35c/0x8a0 ? srso_return_thunk+0x5/0x5f ? trace_hardirqs_off+0x4b/0xc0 ? srso_return_thunk+0x5/0x5f ? lockdep_hardirqs_on_prepare+0xde/0x190 ? srso_return_thunk+0x5/0x5f This happens because when we call rename we already have the inode mutex held, and then we acquire the subvol_sem if we are a subvolume. This makes the dependency inode lock -> subvol sem When we're running data relocation we will preallocate space for the data relocation inode, and we always run the relocation under the ->cleaner_mutex. This now creates the dependency of cleaner_mutex -> inode lock (from the prealloc) -> subvol_sem Qgroup delete is doing this in the opposite order, it is acquiring the subvol_sem and then it is acquiring the cleaner_mutex, which results in this lockdep splat. This deadlock can't happen in reality, because we won't ever rename the data reloc inode, nor is the data reloc inode a subvolume. However this is fairly easy to fix, simply take the cleaner mutex in the case where we are disabling qgroups before we take the subvol_sem. This resolves the lockdep splat. Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
esmil
pushed a commit
that referenced
this pull request
May 6, 2024
Merge series from Jerome Brunet <[email protected]>: This patchset fixes 2 problems on TDM which both find a solution by properly implementing the .trigger() callback for the TDM backend. ATM, enabling the TDM formatters is done by the .prepare() callback because handling the formatter is slow due to necessary calls to CCF. The first problem affects the TDMIN. Because .prepare() is called on DPCM backend first, the formatter are started before the FIFOs and this may cause a random channel shifts if the TDMIN use multiple lanes with more than 2 slots per lanes. Using trigger() allows to set the FE/BE order, solving the problem. There has already been an attempt to fix this 3y ago [1] and reverted [2] It triggered a 'sleep in irq' error on the period IRQ. The solution is to just use the bottom half of threaded IRQ. This is patch #1. Patch #2 and #3 remain mostly the same as 3y ago. For TDMOUT, the problem is on pause. ATM pause only stops the FIFO and the TDMOUT just starves. When it does, it will actually repeat the last sample continuously. Depending on the platform, if there is no high-pass filter on the analog path, this may translate to a constant position of the speaker membrane. There is no audible glitch but it may damage the speaker coil. Properly stopping the TDMOUT in pause solves the problem. There is behaviour change associated with that fix. Clocks used to be continuous on pause because of the problem above. They will now be gated on pause by default, as they should. The last change introduce the proper support for continuous clocks, if needed. [1]: https://lore.kernel.org/linux-amlogic/[email protected] [2]: https://lore.kernel.org/linux-amlogic/[email protected]
esmil
pushed a commit
that referenced
this pull request
May 6, 2024
…kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.9, part #2 - Fix + test for a NULL dereference resulting from unsanitised user input in the vgic-v2 device attribute accessors
esmil
pushed a commit
that referenced
this pull request
Sep 25, 2024
…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 sets on NFT_PKTINFO_L4PROTO for UDP packets less than 4 bytes payload from netdev/egress by subtracting skb_network_offset() when validating IPv4 packet length, otherwise 'meta l4proto udp' never matches. Patch #2 subtracts skb_network_offset() when validating IPv6 packet length for netdev/egress. netfilter pull request 24-08-28 * tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables_ipv6: consider network offset in netdev/egress validation netfilter: nf_tables: restore IP sanity checks for netdev/egress ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Sep 25, 2024
If smb2_compound_op() is called with a valid @CFILE and returned -EINVAL, we need to call cifs_get_writable_path() before retrying it as the reference of @CFILE was already dropped by previous call. This fixes the following KASAN splat when running fstests generic/013 against Windows Server 2022: CIFS: Attempting to mount //w22-fs0/scratch run fstests generic/013 at 2024-09-02 19:48:59 ================================================================== BUG: KASAN: slab-use-after-free in detach_if_pending+0xab/0x200 Write of size 8 at addr ffff88811f1a3730 by task kworker/3:2/176 CPU: 3 UID: 0 PID: 176 Comm: kworker/3:2 Not tainted 6.11.0-rc6 #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Workqueue: cifsoplockd cifs_oplock_break [cifs] Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? detach_if_pending+0xab/0x200 print_report+0x156/0x4d9 ? detach_if_pending+0xab/0x200 ? __virt_addr_valid+0x145/0x300 ? __phys_addr+0x46/0x90 ? detach_if_pending+0xab/0x200 kasan_report+0xda/0x110 ? detach_if_pending+0xab/0x200 detach_if_pending+0xab/0x200 timer_delete+0x96/0xe0 ? __pfx_timer_delete+0x10/0x10 ? rcu_is_watching+0x20/0x50 try_to_grab_pending+0x46/0x3b0 __cancel_work+0x89/0x1b0 ? __pfx___cancel_work+0x10/0x10 ? kasan_save_track+0x14/0x30 cifs_close_deferred_file+0x110/0x2c0 [cifs] ? __pfx_cifs_close_deferred_file+0x10/0x10 [cifs] ? __pfx_down_read+0x10/0x10 cifs_oplock_break+0x4c1/0xa50 [cifs] ? __pfx_cifs_oplock_break+0x10/0x10 [cifs] ? lock_is_held_type+0x85/0xf0 ? mark_held_locks+0x1a/0x90 process_one_work+0x4c6/0x9f0 ? find_held_lock+0x8a/0xa0 ? __pfx_process_one_work+0x10/0x10 ? lock_acquired+0x220/0x550 ? __list_add_valid_or_report+0x37/0x100 worker_thread+0x2e4/0x570 ? __kthread_parkme+0xd1/0xf0 ? __pfx_worker_thread+0x10/0x10 kthread+0x17f/0x1c0 ? kthread+0xda/0x1c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1118: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 cifs_new_fileinfo+0xc8/0x9d0 [cifs] cifs_atomic_open+0x467/0x770 [cifs] lookup_open.isra.0+0x665/0x8b0 path_openat+0x4c3/0x1380 do_filp_open+0x167/0x270 do_sys_openat2+0x129/0x160 __x64_sys_creat+0xad/0xe0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 83: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 poison_slab_object+0xe9/0x160 __kasan_slab_free+0x32/0x50 kfree+0xf2/0x300 process_one_work+0x4c6/0x9f0 worker_thread+0x2e4/0x570 kthread+0x17f/0x1c0 ret_from_fork+0x31/0x60 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x30/0x50 __kasan_record_aux_stack+0xad/0xc0 insert_work+0x29/0xe0 __queue_work+0x5ea/0x760 queue_work_on+0x6d/0x90 _cifsFileInfo_put+0x3f6/0x770 [cifs] smb2_compound_op+0x911/0x3940 [cifs] smb2_set_path_size+0x228/0x270 [cifs] cifs_set_file_size+0x197/0x460 [cifs] cifs_setattr+0xd9c/0x14b0 [cifs] notify_change+0x4e3/0x740 do_truncate+0xfa/0x180 vfs_truncate+0x195/0x200 __x64_sys_truncate+0x109/0x150 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 71f15c9 ("smb: client: retry compound request without reusing lease") Cc: [email protected] Signed-off-by: Paulo Alcantara (Red Hat) <[email protected]> Cc: David Howells <[email protected]> Signed-off-by: Steve French <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Sep 25, 2024
Currently, netif_queue_set_napi() is called from ice_vsi_rebuild() that is not rtnl-locked when called from the reset. This creates the need to take the rtnl_lock just for a single function and complicates the synchronization with .ndo_bpf. At the same time, there no actual need to fill napi-to-queue information at this exact point. Fill napi-to-queue information when opening the VSI and clear it when the VSI is being closed. Those routines are already rtnl-locked. Also, rewrite napi-to-queue assignment in a way that prevents inclusion of XDP queues, as this leads to out-of-bounds writes, such as one below. [ +0.000004] BUG: KASAN: slab-out-of-bounds in netif_queue_set_napi+0x1c2/0x1e0 [ +0.000012] Write of size 8 at addr ffff889881727c80 by task bash/7047 [ +0.000006] CPU: 24 PID: 7047 Comm: bash Not tainted 6.10.0-rc2+ #2 [ +0.000004] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021 [ +0.000003] Call Trace: [ +0.000003] <TASK> [ +0.000002] dump_stack_lvl+0x60/0x80 [ +0.000007] print_report+0xce/0x630 [ +0.000007] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ +0.000007] ? __virt_addr_valid+0x1c9/0x2c0 [ +0.000005] ? netif_queue_set_napi+0x1c2/0x1e0 [ +0.000003] kasan_report+0xe9/0x120 [ +0.000004] ? netif_queue_set_napi+0x1c2/0x1e0 [ +0.000004] netif_queue_set_napi+0x1c2/0x1e0 [ +0.000005] ice_vsi_close+0x161/0x670 [ice] [ +0.000114] ice_dis_vsi+0x22f/0x270 [ice] [ +0.000095] ice_pf_dis_all_vsi.constprop.0+0xae/0x1c0 [ice] [ +0.000086] ice_prepare_for_reset+0x299/0x750 [ice] [ +0.000087] pci_dev_save_and_disable+0x82/0xd0 [ +0.000006] pci_reset_function+0x12d/0x230 [ +0.000004] reset_store+0xa0/0x100 [ +0.000006] ? __pfx_reset_store+0x10/0x10 [ +0.000002] ? __pfx_mutex_lock+0x10/0x10 [ +0.000004] ? __check_object_size+0x4c1/0x640 [ +0.000007] kernfs_fop_write_iter+0x30b/0x4a0 [ +0.000006] vfs_write+0x5d6/0xdf0 [ +0.000005] ? fd_install+0x180/0x350 [ +0.000005] ? __pfx_vfs_write+0x10/0xA10 [ +0.000004] ? do_fcntl+0x52c/0xcd0 [ +0.000004] ? kasan_save_track+0x13/0x60 [ +0.000003] ? kasan_save_free_info+0x37/0x60 [ +0.000006] ksys_write+0xfa/0x1d0 [ +0.000003] ? __pfx_ksys_write+0x10/0x10 [ +0.000002] ? __x64_sys_fcntl+0x121/0x180 [ +0.000004] ? _raw_spin_lock+0x87/0xe0 [ +0.000005] do_syscall_64+0x80/0x170 [ +0.000007] ? _raw_spin_lock+0x87/0xe0 [ +0.000004] ? __pfx__raw_spin_lock+0x10/0x10 [ +0.000003] ? file_close_fd_locked+0x167/0x230 [ +0.000005] ? syscall_exit_to_user_mode+0x7d/0x220 [ +0.000005] ? do_syscall_64+0x8c/0x170 [ +0.000004] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? fput+0x1a/0x2c0 [ +0.000004] ? filp_close+0x19/0x30 [ +0.000004] ? do_dup2+0x25a/0x4c0 [ +0.000004] ? __x64_sys_dup2+0x6e/0x2e0 [ +0.000002] ? syscall_exit_to_user_mode+0x7d/0x220 [ +0.000004] ? do_syscall_64+0x8c/0x170 [ +0.000003] ? __count_memcg_events+0x113/0x380 [ +0.000005] ? handle_mm_fault+0x136/0x820 [ +0.000005] ? do_user_addr_fault+0x444/0xa80 [ +0.000004] ? clear_bhb_loop+0x25/0x80 [ +0.000004] ? clear_bhb_loop+0x25/0x80 [ +0.000002] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000005] RIP: 0033:0x7f2033593154 Fixes: 080b0c8 ("ice: Fix ASSERT_RTNL() warning during certain scenarios") Fixes: 91fdbce ("ice: Add support in the driver for associating queue with napi") Reviewed-by: Wojciech Drewek <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Reviewed-by: Amritha Nambiar <[email protected]> Signed-off-by: Larysa Zaremba <[email protected]> Reviewed-by: Maciej Fijalkowski <[email protected]> Tested-by: George Kuruvinakunnel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Sep 25, 2024
Chi Zhiling reported:
We found a null pointer accessing in tracefs[1], the reason is that the
variable 'ei_child' is set to LIST_POISON1, that means the list was
removed in eventfs_remove_rec. so when access the ei_child->is_freed, the
panic triggered.
by the way, the following script can reproduce this panic
loop1 (){
while true
do
echo "p:kp submit_bio" > /sys/kernel/debug/tracing/kprobe_events
echo "" > /sys/kernel/debug/tracing/kprobe_events
done
}
loop2 (){
while true
do
tree /sys/kernel/debug/tracing/events/kprobes/
done
}
loop1 &
loop2
[1]:
[ 1147.959632][T17331] Unable to handle kernel paging request at virtual address dead000000000150
[ 1147.968239][T17331] Mem abort info:
[ 1147.971739][T17331] ESR = 0x0000000096000004
[ 1147.976172][T17331] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1147.982171][T17331] SET = 0, FnV = 0
[ 1147.985906][T17331] EA = 0, S1PTW = 0
[ 1147.989734][T17331] FSC = 0x04: level 0 translation fault
[ 1147.995292][T17331] Data abort info:
[ 1147.998858][T17331] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 1148.005023][T17331] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 1148.010759][T17331] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 1148.016752][T17331] [dead000000000150] address between user and kernel address ranges
[ 1148.024571][T17331] Internal error: Oops: 0000000096000004 [#1] SMP
[ 1148.030825][T17331] Modules linked in: team_mode_loadbalance team nlmon act_gact cls_flower sch_ingress bonding tls macvlan dummy ib_core bridge stp llc veth amdgpu amdxcp mfd_core gpu_sched drm_exec drm_buddy radeon crct10dif_ce video drm_suballoc_helper ghash_ce drm_ttm_helper sha2_ce ttm sha256_arm64 i2c_algo_bit sha1_ce sbsa_gwdt cp210x drm_display_helper cec sr_mod cdrom drm_kms_helper binfmt_misc sg loop fuse drm dm_mod nfnetlink ip_tables autofs4 [last unloaded: tls]
[ 1148.072808][T17331] CPU: 3 PID: 17331 Comm: ls Tainted: G W ------- ---- 6.6.43 #2
[ 1148.081751][T17331] Source Version: 21b3b386e948bedd29369af66f3e98ab01b1c650
[ 1148.088783][T17331] Hardware name: Greatwall GW-001M1A-FTF/GW-001M1A-FTF, BIOS KunLun BIOS V4.0 07/16/2020
[ 1148.098419][T17331] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1148.106060][T17331] pc : eventfs_iterate+0x2c0/0x398
[ 1148.111017][T17331] lr : eventfs_iterate+0x2fc/0x398
[ 1148.115969][T17331] sp : ffff80008d56bbd0
[ 1148.119964][T17331] x29: ffff80008d56bbf0 x28: ffff001ff5be2600 x27: 0000000000000000
[ 1148.127781][T17331] x26: ffff001ff52ca4e0 x25: 0000000000009977 x24: dead000000000100
[ 1148.135598][T17331] x23: 0000000000000000 x22: 000000000000000b x21: ffff800082645f10
[ 1148.143415][T17331] x20: ffff001fddf87c70 x19: ffff80008d56bc90 x18: 0000000000000000
[ 1148.151231][T17331] x17: 0000000000000000 x16: 0000000000000000 x15: ffff001ff52ca4e0
[ 1148.159048][T17331] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 1148.166864][T17331] x11: 0000000000000000 x10: 0000000000000000 x9 : ffff8000804391d0
[ 1148.174680][T17331] x8 : 0000000180000000 x7 : 0000000000000018 x6 : 0000aaab04b92862
[ 1148.182498][T17331] x5 : 0000aaab04b92862 x4 : 0000000080000000 x3 : 0000000000000068
[ 1148.190314][T17331] x2 : 000000000000000f x1 : 0000000000007ea8 x0 : 0000000000000001
[ 1148.198131][T17331] Call trace:
[ 1148.201259][T17331] eventfs_iterate+0x2c0/0x398
[ 1148.205864][T17331] iterate_dir+0x98/0x188
[ 1148.210036][T17331] __arm64_sys_getdents64+0x78/0x160
[ 1148.215161][T17331] invoke_syscall+0x78/0x108
[ 1148.219593][T17331] el0_svc_common.constprop.0+0x48/0xf0
[ 1148.224977][T17331] do_el0_svc+0x24/0x38
[ 1148.228974][T17331] el0_svc+0x40/0x168
[ 1148.232798][T17331] el0t_64_sync_handler+0x120/0x130
[ 1148.237836][T17331] el0t_64_sync+0x1a4/0x1a8
[ 1148.242182][T17331] Code: 54ffff6c f9400676 910006d6 f900067 (b9405300)
[ 1148.248955][T17331] ---[ end trace 0000000000000000 ]---
The issue is that list_del() is used on an SRCU protected list variable
before the synchronization occurs. This can poison the list pointers while
there is a reader iterating the list.
This is simply fixed by using list_del_rcu() that is specifically made for
this purpose.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]/
Cc: [email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Link: https://lore.kernel.org/[email protected]
Fixes: 43aa6f9 ("eventfs: Get rid of dentry pointers without refcounts")
Reported-by: Chi Zhiling <[email protected]>
Tested-by: Chi Zhiling <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
esmil
pushed a commit
that referenced
this pull request
Sep 25, 2024
…nux/kernel/git/ukleinek/linux Pull pwm fix from Uwe Kleine-König: "Fix an off-by-one in the stm32 driver. Hardware engineers tend to start counting at 1 while the software guys usually start with 0. This isn't so nice because that results in drivers where pwm device #2 needs to use the hardware registers with index 3. This was noticed by Fabrice Gasnier. A small patch fixing that mismatch is the only change included here" * tag 'pwm/for-6.11-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: pwm: stm32: Use the right CCxNP bit in stm32_pwm_enable()
esmil
pushed a commit
that referenced
this pull request
Sep 25, 2024
…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following batch contains two fixes from Florian Westphal: Patch #1 fixes a sk refcount leak in nft_socket on mismatch. Patch #2 fixes cgroupsv2 matching from containers due to incorrect level in subtree. netfilter pull request 24-09-12 * tag 'nf-24-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_socket: make cgroupsv2 matching work with namespaces netfilter: nft_socket: fix sk refcount leaks ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Signed-off-by: Akira Tsukamoto [email protected]