Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Robot Model not Loaded: MoveIt w/ RVIZ #2738

Closed
xardarii opened this issue Jan 14, 2024 · 26 comments
Closed

Robot Model not Loaded: MoveIt w/ RVIZ #2738

xardarii opened this issue Jan 14, 2024 · 26 comments
Labels
stale Inactive issues and PRs are marked as stale and may be closed automatically.

Comments

@xardarii
Copy link

xardarii commented Jan 14, 2024 •
edited by gavanderhoorn
Loading

Hey there!
I have been working on a custom robotic arm and I am kinda new to this but I ran into this issue after I successfully generated the moveit configuration files using Moveit Setup Assistant. I am not able to load the robot model into RVIZ when i run the "ros2 launch robot_moveit_config demo.launch.py" command and the motion planning shows an error.

Environment

  • ROS Distro: Humble
  • OS Version: Ubuntu 22.04
  • Binary build?

Steps to reproduce

  1. Generate the moveit configuration files using MoveIt Setup Assistant
  2. cd into the workspace
  3. Colcon build all the packages in the workspace
  4. Source install/setup.bash
  5. run the command "ros2 launch robot_moveit_config demo.launch.py"

Expected behaviour

My custom robot should load in RVIZ and I should be able to plan motion.

Current behaviour

Screenshot from 2024-01-14 22-44-40

Console output

[INFO] [launch]: All log files can be found below /home/xardarii-dev/.ros/log/2024-01-14-22-24-10-585017-xardarii-dev-28764
[INFO] [launch]: Default logging verbosity is set to INFO
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
[INFO] [static_transform_publisher-1]: process started with pid [28765]
[INFO] [robot_state_publisher-2]: process started with pid [28767]
[INFO] [move_group-3]: process started with pid [28769]
[INFO] [rviz2-4]: process started with pid [28771]
[INFO] [ros2_control_node-5]: process started with pid [28773]
[INFO] [spawner-6]: process started with pid [28793]
[INFO] [spawner-7]: process started with pid [28795]
[static_transform_publisher-1] [INFO] [1705253051.694828534] [static_transform_publisher0]: Spinning until stopped - publishing transform
[static_transform_publisher-1] translation: ('0.000000', '0.000000', '0.000000')
[static_transform_publisher-1] rotation: ('0.000000', '0.000000', '0.000000', '1.000000')
[static_transform_publisher-1] from 'world' to 'base_link'
[robot_state_publisher-2] [INFO] [1705253051.706974300] [robot_state_publisher]: got segment Link_1
[robot_state_publisher-2] [INFO] [1705253051.707163909] [robot_state_publisher]: got segment Link_2
[robot_state_publisher-2] [INFO] [1705253051.707189631] [robot_state_publisher]: got segment Link_3
[robot_state_publisher-2] [INFO] [1705253051.707208474] [robot_state_publisher]: got segment base_link
[robot_state_publisher-2] [INFO] [1705253051.707224933] [robot_state_publisher]: got segment world
[rviz2-4] Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway.
[ros2_control_node-5] [WARN] [1705253051.775095848] [controller_manager]: [Deprecated] Passing the robot description parameter directly to the control_manager node is deprecated. Use '~/robot_description' topic from 'robot_state_publisher' instead.
[ros2_control_node-5] [INFO] [1705253051.782069248] [resource_manager]: Loading hardware 'FakeSystem' 
[ros2_control_node-5] [INFO] [1705253051.784188161] [resource_manager]: Initialize hardware 'FakeSystem' 
[ros2_control_node-5] [WARN] [1705253051.785090442] [mock_generic_system]: Parsing of optional initial interface values failed or uses a deprecated format. Add initial values for every state interface in the ros2_control.xacro. For example: 
[ros2_control_node-5] <state_interface name="velocity"> 
[ros2_control_node-5]   <param name="initial_value">0.0</param> 
[ros2_control_node-5] </state_interface>
[ros2_control_node-5] [INFO] [1705253051.785136454] [resource_manager]: Successful initialization of hardware 'FakeSystem'
[ros2_control_node-5] [INFO] [1705253051.785191671] [resource_manager]: 'configure' hardware 'FakeSystem' 
[ros2_control_node-5] [INFO] [1705253051.785204327] [resource_manager]: Successful 'configure' of hardware 'FakeSystem'
[ros2_control_node-5] [INFO] [1705253051.785214607] [resource_manager]: 'activate' hardware 'FakeSystem' 
[ros2_control_node-5] [INFO] [1705253051.785223733] [resource_manager]: Successful 'activate' of hardware 'FakeSystem'
[move_group-3] [INFO] [1705253051.803078818] [moveit_rdf_loader.rdf_loader]: Loaded robot model in 0.011324 seconds
[move_group-3] [INFO] [1705253051.803177999] [moveit_robot_model.robot_model]: Loading robot model 'robot'...
[ros2_control_node-5] [INFO] [1705253051.812724383] [controller_manager]: update rate is 100 Hz
[move_group-3] terminate called after throwing an instance of 'rclcpp::exceptions::InvalidParameterTypeException'
[move_group-3]   what():  parameter 'robot_description_planning.joint_limits.Joint_1.max_velocity' has invalid type: expected [double] got [integer]
[move_group-3] Stack trace (most recent call last):
[ros2_control_node-5] [INFO] [1705253051.820171475] [controller_manager]: RT kernel is recommended for better performance
[move_group-3] ros-planning/moveit#18   Object "", at 0xffffffffffffffff, in 
[move_group-3] ros-planning/moveit#17   Object "/opt/ros/humble/lib/moveit_ros_move_group/move_group", at 0x56005734c724, in 
[move_group-3] ros-planning/moveit#16   Source "../csu/libc-start.c", line 392, in __libc_start_main_impl [0x7fea13a29e3f]
[move_group-3] ros-planning/moveit#15   Source "../sysdeps/nptl/libc_start_call_main.h", line 58, in __libc_start_call_main [0x7fea13a29d8f]
[move_group-3] ros-planning/moveit#14   Object "/opt/ros/humble/lib/moveit_ros_move_group/move_group", at 0x56005734b2c2, in 
[move_group-3] ros-planning/moveit#13   Object "/opt/ros/humble/lib/libmoveit_cpp.so.2.5.5", at 0x7fea1459ce94, in moveit_cpp::MoveItCpp::MoveItCpp(std::shared_ptr<rclcpp::Node> const&, moveit_cpp::MoveItCpp::Options const&)
[move_group-3] ros-planning/moveit#12   Object "/opt/ros/humble/lib/libmoveit_cpp.so.2.5.5", at 0x7fea1459a84b, in moveit_cpp::MoveItCpp::loadPlanningSceneMonitor(moveit_cpp::MoveItCpp::PlanningSceneMonitorOptions const&)
[move_group-3] ros-planning/moveit#11   Object "/opt/ros/humble/lib/libmoveit_planning_scene_monitor.so.2.5.5", at 0x7fea144be48a, in planning_scene_monitor::PlanningSceneMonitor::PlanningSceneMonitor(std::shared_ptr<rclcpp::Node> const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)
[move_group-3] ros-planning/moveit#10   Object "/opt/ros/humble/lib/libmoveit_planning_scene_monitor.so.2.5.5", at 0x7fea144be3da, in planning_scene_monitor::PlanningSceneMonitor::PlanningSceneMonitor(std::shared_ptr<rclcpp::Node> const&, std::shared_ptr<planning_scene::PlanningScene> const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)
[move_group-3] ros-planning/moveit#9    Object "/opt/ros/humble/lib/libmoveit_robot_model_loader.so.2.5.5", at 0x7fea137cec3e, in robot_model_loader::RobotModelLoader::RobotModelLoader(std::shared_ptr<rclcpp::Node> const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, bool)
[move_group-3] ros-planning/moveit#8    Object "/opt/ros/humble/lib/libmoveit_robot_model_loader.so.2.5.5", at 0x7fea137cd3f9, in robot_model_loader::RobotModelLoader::configure(robot_model_loader::RobotModelLoader::Options const&)
[move_group-3] ros-planning/moveit#7    Object "/opt/ros/humble/lib/libmoveit_robot_model_loader.so.2.5.5", at 0x7fea137c71a2, in 
[move_group-3] ros-planning/moveit#6    Object "/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.30", at 0x7fea13eae4d7, in __cxa_throw
[move_group-3] ros-planning/moveit#5    Object "/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.30", at 0x7fea13eae276, in std::terminate()
[move_group-3] ros-planning/moveit#4    Object "/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.30", at 0x7fea13eae20b, in 
[move_group-3] ros-planning/moveit#3    Object "/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.30", at 0x7fea13ea2b9d, in 
[move_group-3] ros-planning/moveit#2    Source "./stdlib/abort.c", line 79, in abort [0x7fea13a287f2]
[move_group-3] ros-planning/moveit#1    Source "../sysdeps/posix/raise.c", line 26, in raise [0x7fea13a42475]
[move_group-3] #0  | Source "./nptl/pthread_kill.c", line 89, in __pthread_kill_internal
[move_group-3]     | Source "./nptl/pthread_kill.c", line 78, in __pthread_kill_implementation
[move_group-3]       Source "./nptl/pthread_kill.c", line 44, in __pthread_kill [0x7fea13a969fc]
[move_group-3] Aborted (Signal sent by tkill() 28769 1000)
[rviz2-4] [INFO] [1705253052.215352662] [rviz2]: Stereo is NOT SUPPORTED
[rviz2-4] [INFO] [1705253052.216303455] [rviz2]: OpenGl version: 4.6 (GLSL 4.6)
[rviz2-4] [INFO] [1705253052.247065536] [rviz2]: Stereo is NOT SUPPORTED
[ros2_control_node-5] [INFO] [1705253052.340275905] [controller_manager]: Loading controller 'robotplanner_controller'
[ros2_control_node-5] [WARN] [1705253052.357601012] [robotplanner_controller]: [Deprecated]: "allow_nonzero_velocity_at_trajectory_end" is set to true. The default behavior will change to false.
[spawner-6] [INFO] [1705253052.384092784] [spawner_robotplanner_controller]: Loaded robotplanner_controller
[ros2_control_node-5] [INFO] [1705253052.385752753] [controller_manager]: Configuring controller 'robotplanner_controller'
[ros2_control_node-5] [INFO] [1705253052.385974574] [robotplanner_controller]: No specific joint names are used for command interfaces. Using 'joints' parameter.
[ros2_control_node-5] [INFO] [1705253052.386009886] [robotplanner_controller]: Command interfaces are [position] and state interfaces are [position velocity].
[ros2_control_node-5] [INFO] [1705253052.386027180] [robotplanner_controller]: Using 'splines' interpolation method.
[ros2_control_node-5] [INFO] [1705253052.388414112] [robotplanner_controller]: Controller state will be published at 50.00 Hz.
[ros2_control_node-5] [INFO] [1705253052.393240866] [robotplanner_controller]: Action status changes will be monitored at 20.00 Hz.
[rviz2-4] Warning: class_loader.impl: SEVERE WARNING!!! A namespace collision has occurred with plugin factory for class rviz_default_plugins::displays::InteractiveMarkerDisplay. New factory will OVERWRITE existing one. This situation occurs when libraries containing plugins are directly linked against an executable (the one running right now generating this message). Please separate plugins out into their own library or just don't link against the library and use either class_loader::ClassLoader/MultiLibraryClassLoader to open.
[rviz2-4]          at line 253 in /opt/ros/humble/include/class_loader/class_loader/class_loader_core.hpp
[spawner-6] [INFO] [1705253052.431667556] [spawner_robotplanner_controller]: Configured and activated robotplanner_controller
[ros2_control_node-5] [INFO] [1705253052.548884046] [controller_manager]: Loading controller 'joint_state_broadcaster'
[INFO] [spawner-6]: process has finished cleanly [pid 28793]
[spawner-7] [INFO] [1705253052.592620385] [spawner_joint_state_broadcaster]: Loaded joint_state_broadcaster
[ros2_control_node-5] [INFO] [1705253052.594728237] [controller_manager]: Configuring controller 'joint_state_broadcaster'
[ros2_control_node-5] [INFO] [1705253052.594850254] [joint_state_broadcaster]: 'joints' or 'interfaces' parameter is empty. All available state interfaces will be published
[spawner-7] [INFO] [1705253052.622476574] [spawner_joint_state_broadcaster]: Configured and activated joint_state_broadcaster
[INFO] [spawner-7]: process has finished cleanly [pid 28795]
[ERROR] [move_group-3]: process has died [pid 28769, exit code -6, cmd '/opt/ros/humble/lib/moveit_ros_move_group/move_group --ros-args --params-file /tmp/launch_params_l35i_082 --params-file /tmp/launch_params_t8nz45fa'].
[rviz2-4] [ERROR] [1705253055.430979629] [moveit_ros_visualization.motion_planning_frame]: Action server: /recognize_objects not available
[rviz2-4] [INFO] [1705253055.490134361] [moveit_ros_visualization.motion_planning_frame]: MoveGroup namespace changed: / -> . Reloading params.
[rviz2-4] [ERROR] [1705253065.609118373] [rviz]: Could not find parameter robot_description_semantic and did not receive robot_description_semantic via std_msgs::msg::String subscription within 10.000000 seconds.
[rviz2-4] Error:   Could not parse the SRDF XML File. Error=XML_ERROR_EMPTY_DOCUMENT ErrorID=13 (0xd) Line number=0
[rviz2-4]          at line 715 in ./src/model.cpp
[rviz2-4] [ERROR] [1705253065.621057817] [moveit_rdf_loader.rdf_loader]: Unable to parse SRDF
[rviz2-4] [ERROR] [1705253065.639710877] [moveit_ros.planning_scene_monitor.planning_scene_monitor]: Robot model not loaded
@welcome Welcome
Copy link

welcome bot commented Jan 14, 2024

Thanks for reporting an issue. Because we're a volunteer community, providing a pull request with suggested changes is always welcomed.

@Akumar201
Copy link

Hi, as far as I understood from your log. I guess we need to focus on these lines

[rviz2-4] [ERROR] [1705253065.609118373] [rviz]: Could not find parameter robot_description_semantic and did not receive robot_description_semantic via std_msgs::msg::String subscription within 10.000000 seconds.
[rviz2-4] Error: Could not parse the SRDF XML File. Error=XML_ERROR_EMPTY_DOCUMENT ErrorID=13 (0xd) Line number=0
[rviz2-4] at line 715 in ./src/model.cpp
[rviz2-4] [ERROR] [1705253065.621057817] [moveit_rdf_loader.rdf_loader]: Unable to parse SRDF

So what it means is like your robot model is not available in the parameter server. Please visit [Universal Robot Github](https://github.com/ros-industrial/universal_robot/blob/melodic-devel/ur10e_moveit_config/launch/moveit_rviz.launch) and see how they are doing it. Basically you need to launch files that will publish robot to parameter server.

@LuisOPortela
Copy link

Hello!
Did you find any solution to this problem?
I am currently having the exact same issue :(
Any help would be greatly appreciated!

@Akumar201
Copy link

Hi @LuisOPortela please explain your issue completely with logs.

@rhaschke rhaschke transferred this issue from moveit/moveit Mar 12, 2024
@nisathav
Copy link

nisathav commented Mar 13, 2024 •
edited
Loading

hey there,
I am also running into same issue with the same environment setup. When I run ros2 launch panda_moveit_config demo.launch.py everything is working fine. I tried to create the same setup like panda_description folder to my custom robot named gimbal_description. and created the moveit2 config files using moveit setup assistant.

but when I run ros2 launch gimbal_moveit_config demo.launch.py, I am unable to see the robot in the rviz.

Here is my console output:

nisat@pc:~/control_ws$ ros2 launch gimbal_moveit_config demo.launch.py 
[INFO] [launch]: All log files can be found below /home/nisat/.ros/log/2024-03-13-09-14-23-854622-pc-67690
[INFO] [launch]: Default logging verbosity is set to INFO
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
[INFO] [static_transform_publisher-1]: process started with pid [67691]
[INFO] [robot_state_publisher-2]: process started with pid [67693]
[INFO] [move_group-3]: process started with pid [67695]
[INFO] [rviz2-4]: process started with pid [67697]
[INFO] [ros2_control_node-5]: process started with pid [67699]
[INFO] [spawner-6]: process started with pid [67701]
[INFO] [spawner-7]: process started with pid [67703]
[INFO] [spawner-8]: process started with pid [67705]
[static_transform_publisher-1] [INFO] [1710301464.286382374] [static_transform_publisher0]: Spinning until stopped - publishing transform
[static_transform_publisher-1] translation: ('0.000000', '0.000000', '0.000000')
[static_transform_publisher-1] rotation: ('0.000000', '0.000000', '0.000000', '1.000000')
[static_transform_publisher-1] from 'world' to 'gimbal_link0'
[robot_state_publisher-2] [WARN] [1710301464.292067896] [kdl_parser]: The root link gimbal_link0 has an inertia specified in the URDF, but KDL does not support a root link with an inertia.  As a workaround, you can add an extra dummy link to your URDF.
[robot_state_publisher-2] [INFO] [1710301464.292151022] [robot_state_publisher]: got segment gimbal_link0
[robot_state_publisher-2] [INFO] [1710301464.292198245] [robot_state_publisher]: got segment gimbal_link1
[robot_state_publisher-2] [INFO] [1710301464.292208410] [robot_state_publisher]: got segment gimbal_link2
[robot_state_publisher-2] [INFO] [1710301464.292216156] [robot_state_publisher]: got segment gimbal_link3
[robot_state_publisher-2] [INFO] [1710301464.292223662] [robot_state_publisher]: got segment gimbal_link4
[ros2_control_node-5] [WARN] [1710301464.301751798] [controller_manager]: [Deprecated] Passing the robot description parameter directly to the control_manager node is deprecated. Use '~/robot_description' topic from 'robot_state_publisher' instead.
[ros2_control_node-5] [INFO] [1710301464.301958681] [resource_manager]: Loading hardware 'FakeSystem' 
[ros2_control_node-5] [INFO] [1710301464.302559632] [resource_manager]: Initialize hardware 'FakeSystem' 
[ros2_control_node-5] [WARN] [1710301464.302614865] [mock_generic_system]: Parsing of optional initial interface values failed or uses a deprecated format. Add initial values for every state interface in the ros2_control.xacro. For example: 
[ros2_control_node-5] <state_interface name="velocity"> 
[ros2_control_node-5]   <param name="initial_value">0.0</param> 
[ros2_control_node-5] </state_interface>
[ros2_control_node-5] [INFO] [1710301464.302627870] [resource_manager]: Successful initialization of hardware 'FakeSystem'
[ros2_control_node-5] [INFO] [1710301464.302686872] [resource_manager]: 'configure' hardware 'FakeSystem' 
[ros2_control_node-5] [INFO] [1710301464.302695282] [resource_manager]: Successful 'configure' of hardware 'FakeSystem'
[ros2_control_node-5] [INFO] [1710301464.302701365] [resource_manager]: 'activate' hardware 'FakeSystem' 
[ros2_control_node-5] [INFO] [1710301464.302706020] [resource_manager]: Successful 'activate' of hardware 'FakeSystem'
[move_group-3] [INFO] [1710301464.302846664] [moveit_rdf_loader.rdf_loader]: Loaded robot model in 0.00157355 seconds
[move_group-3] [INFO] [1710301464.302874931] [moveit_robot_model.robot_model]: Loading robot model 'gimbal'...
[move_group-3] [WARN] [1710301464.304392981] [moveit_robot_model.robot_model]: Could not identify parent group for end-effector 'hand'
[move_group-3] terminate called after throwing an instance of 'rclcpp::exceptions::InvalidParameterTypeException'
[move_group-3]   what():  parameter 'robot_description_planning.joint_limits.gimbal_joint2.max_velocity' has invalid type: expected [double] got [integer]
[move_group-3] Stack trace (most recent call last):
[ros2_control_node-5] [INFO] [1710301464.304640355] [controller_manager]: update rate is 100 Hz
[ros2_control_node-5] [INFO] [1710301464.304766322] [controller_manager]: RT kernel is recommended for better performance
[move_group-3] #18   Object "", at 0xffffffffffffffff, in 
[move_group-3] #17   Object "/opt/ros/humble/lib/moveit_ros_move_group/move_group", at 0x61c3c37c2724, in 
[move_group-3] #16   Source "../csu/libc-start.c", line 392, in __libc_start_main_impl [0x78456f429e3f]
[move_group-3] #15   Source "../sysdeps/nptl/libc_start_call_main.h", line 58, in __libc_start_call_main [0x78456f429d8f]
[move_group-3] #14   Object "/opt/ros/humble/lib/moveit_ros_move_group/move_group", at 0x61c3c37c12c2, in 
[move_group-3] #13   Object "/opt/ros/humble/lib/libmoveit_cpp.so.2.5.5", at 0x78457006be94, in moveit_cpp::MoveItCpp::MoveItCpp(std::shared_ptr<rclcpp::Node> const&, moveit_cpp::MoveItCpp::Options const&)
[move_group-3] #12   Object "/opt/ros/humble/lib/libmoveit_cpp.so.2.5.5", at 0x78457006984b, in moveit_cpp::MoveItCpp::loadPlanningSceneMonitor(moveit_cpp::MoveItCpp::PlanningSceneMonitorOptions const&)
[move_group-3] #11   Object "/opt/ros/humble/lib/libmoveit_planning_scene_monitor.so.2.5.5", at 0x78456ff8b48a, in planning_scene_monitor::PlanningSceneMonitor::PlanningSceneMonitor(std::shared_ptr<rclcpp::Node> const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)
[move_group-3] #10   Object "/opt/ros/humble/lib/libmoveit_planning_scene_monitor.so.2.5.5", at 0x78456ff8b3da, in planning_scene_monitor::PlanningSceneMonitor::PlanningSceneMonitor(std::shared_ptr<rclcpp::Node> const&, std::shared_ptr<planning_scene::PlanningScene> const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)
[move_group-3] #9    Object "/opt/ros/humble/lib/libmoveit_robot_model_loader.so.2.5.5", at 0x78456f28ac3e, in robot_model_loader::RobotModelLoader::RobotModelLoader(std::shared_ptr<rclcpp::Node> const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, bool)
[move_group-3] #8    Object "/opt/ros/humble/lib/libmoveit_robot_model_loader.so.2.5.5", at 0x78456f2893f9, in robot_model_loader::RobotModelLoader::configure(robot_model_loader::RobotModelLoader::Options const&)
[move_group-3] #7    Object "/opt/ros/humble/lib/libmoveit_robot_model_loader.so.2.5.5", at 0x78456f2831a2, in 
[move_group-3] #6    Object "/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.30", at 0x78456f8ae4d7, in __cxa_throw
[move_group-3] #5    Object "/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.30", at 0x78456f8ae276, in std::terminate()
[move_group-3] #4    Object "/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.30", at 0x78456f8ae20b, in 
[move_group-3] #3    Object "/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.30", at 0x78456f8a2b9d, in 
[move_group-3] #2    Source "./stdlib/abort.c", line 79, in abort [0x78456f4287f2]
[move_group-3] #1    Source "../sysdeps/posix/raise.c", line 26, in raise [0x78456f442475]
[move_group-3] #0  | Source "./nptl/pthread_kill.c", line 89, in __pthread_kill_internal
[move_group-3]     | Source "./nptl/pthread_kill.c", line 78, in __pthread_kill_implementation
[move_group-3]       Source "./nptl/pthread_kill.c", line 44, in __pthread_kill [0x78456f4969fc]
[move_group-3] Aborted (Signal sent by tkill() 67695 1000)
[ros2_control_node-5] [INFO] [1710301464.444362051] [controller_manager]: Loading controller 'joint_state_broadcaster'
[spawner-8] [INFO] [1710301464.462851786] [spawner_joint_state_broadcaster]: Loaded joint_state_broadcaster
[ros2_control_node-5] [INFO] [1710301464.474101792] [controller_manager]: Configuring controller 'joint_state_broadcaster'
[ros2_control_node-5] [INFO] [1710301464.474212067] [joint_state_broadcaster]: 'joints' or 'interfaces' parameter is empty. All available state interfaces will be published
[spawner-8] [INFO] [1710301464.505507335] [spawner_joint_state_broadcaster]: Configured and activated joint_state_broadcaster
[ros2_control_node-5] [INFO] [1710301464.657560262] [controller_manager]: Loading controller 'hand_controllers'
[INFO] [spawner-8]: process has finished cleanly [pid 67705]
[ros2_control_node-5] [INFO] [1710301464.665210619] [controller_manager]: Loading controller 'arm_controllers'
[spawner-7] [INFO] [1710301464.665629181] [spawner_hand_controllers]: Loaded hand_controllers
[ros2_control_node-5] [WARN] [1710301464.670785996] [arm_controllers]: [Deprecated]: "allow_nonzero_velocity_at_trajectory_end" is set to true. The default behavior will change to false.
[ros2_control_node-5] [INFO] [1710301464.675221072] [controller_manager]: Configuring controller 'hand_controllers'
[ros2_control_node-5] [INFO] [1710301464.675345925] [hand_controllers]: Action status changes will be monitored at 20Hz.
[spawner-6] [INFO] [1710301464.676575555] [spawner_arm_controllers]: Loaded arm_controllers
[ros2_control_node-5] [INFO] [1710301464.685378153] [controller_manager]: Configuring controller 'arm_controllers'
[ros2_control_node-5] [INFO] [1710301464.685659501] [arm_controllers]: No specific joint names are used for command interfaces. Using 'joints' parameter.
[ros2_control_node-5] [INFO] [1710301464.685730865] [arm_controllers]: Command interfaces are [position] and state interfaces are [position velocity].
[ros2_control_node-5] [INFO] [1710301464.685764310] [arm_controllers]: Using 'splines' interpolation method.
[ros2_control_node-5] [INFO] [1710301464.686527178] [arm_controllers]: Controller state will be published at 50.00 Hz.
[ros2_control_node-5] [INFO] [1710301464.689637090] [arm_controllers]: Action status changes will be monitored at 20.00 Hz.
[spawner-7] [INFO] [1710301464.716501966] [spawner_hand_controllers]: Configured and activated hand_controllers
[spawner-6] [INFO] [1710301464.736077421] [spawner_arm_controllers]: Configured and activated arm_controllers
[INFO] [spawner-7]: process has finished cleanly [pid 67703]
[INFO] [spawner-6]: process has finished cleanly [pid 67701]
[rviz2-4] [INFO] [1710301465.215208864] [rviz2]: Stereo is NOT SUPPORTED
[rviz2-4] [INFO] [1710301465.215258903] [rviz2]: OpenGl version: 4.6 (GLSL 4.6)
[rviz2-4] [INFO] [1710301465.229747736] [rviz2]: Stereo is NOT SUPPORTED
[rviz2-4] Warning: class_loader.impl: SEVERE WARNING!!! A namespace collision has occurred with plugin factory for class rviz_default_plugins::displays::InteractiveMarkerDisplay. New factory will OVERWRITE existing one. This situation occurs when libraries containing plugins are directly linked against an executable (the one running right now generating this message). Please separate plugins out into their own library or just don't link against the library and use either class_loader::ClassLoader/MultiLibraryClassLoader to open.
[rviz2-4]          at line 253 in /opt/ros/humble/include/class_loader/class_loader/class_loader_core.hpp
[ERROR] [move_group-3]: process has died [pid 67695, exit code -6, cmd '/opt/ros/humble/lib/moveit_ros_move_group/move_group --ros-args --params-file /tmp/launch_params_keowhe4o --params-file /tmp/launch_params_p3s74afb'].
[rviz2-4] [ERROR] [1710301468.298984085] [moveit_ros_visualization.motion_planning_frame]: Action server: /recognize_objects not available
[rviz2-4] [INFO] [1710301468.313981127] [moveit_ros_visualization.motion_planning_frame]: MoveGroup namespace changed: / -> . Reloading params.
[rviz2-4] [ERROR] [1710301478.386862068] [rviz]: Could not find parameter robot_description_semantic and did not receive robot_description_semantic via std_msgs::msg::String subscription within 10.000000 seconds.
[rviz2-4] Error:   Could not parse the SRDF XML File. Error=XML_ERROR_EMPTY_DOCUMENT ErrorID=13 (0xd) Line number=0
[rviz2-4]          at line 715 in ./src/model.cpp
[rviz2-4] [ERROR] [1710301478.391110425] [moveit_rdf_loader.rdf_loader]: Unable to parse SRDF
[rviz2-4] [ERROR] [1710301478.398484035] [moveit_ros.planning_scene_monitor.planning_scene_monitor]: Robot model not loaded

@LuisOPortela
Copy link

LuisOPortela commented Mar 13, 2024 •
edited
Loading

Meanwhile, I have discovered some corrections that have fixed the problem for me. I don't know if this will help in your cases, but they were the following:

  • In the config folder of the created package, a number of variables are as ints and not as doubles, which causes the "move_group" process to crash. To fix this, in the "joint_limits.yaml" add ".0" to the limits. For example, change the max velocity from 1 to 1.0. This error can be seen in the log of @nisathav posted above:
[move_group-3]   what():  parameter 'robot_description_planning.joint_limits.gimbal_joint2.max_velocity' has invalid type: expected [double] got [integer]
  • Change the "sensors_3d.yaml" file to simply be:
 sensors: []

In my case, I don't think I will need it to be anything more than that, and it was making the "move_group" crash once again.

With the fixes above Rviz was able to load my robot model but I was still not able to plan movements. To fix this, I added some extra lines to the "joint_limits.yaml" file. Here's what it looks like for one of my joints named "Joint_1":

........

joint_limits:
 Joint_1:
   has_velocity_limits: true
   max_velocity: 1.0
   has_accelaration_limits: true
   max_accelaration: 1.0 
   has_jerk_limits: false

 .......

Hope this helps! Let me know if it does :)

@nisathav
Copy link

Hi there,
tried them and received the following error. Nothing is loading up now.

nisat@pc:~/control_ws$ ros2 launch gimbal_moveit demo.launch.py 
[INFO] [launch]: All log files can be found below /home/nisat/.ros/log/2024-03-14-13-03-21-509953-pc-39842
[INFO] [launch]: Default logging verbosity is set to INFO
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
Using load_yaml() directly is deprecated. Use xacro.load_yaml() instead.
[ERROR] [launch]: Caught exception in launch (see debug for traceback): 'capabilities'

@LuisOPortela
Copy link

I never had that issue @nisathav, so I don't know how to help you :(
It's also strange because that error seems to be before the fixes I mentioned interfere with the launch.
In your place, I would try to check if I changed anything that broke the launch.
But apparently, more people are having that issue aswell: #2734

@mink007
Copy link

mink007 commented Mar 14, 2024

@nisathav please see if this #2587 fixes

[ERROR] [launch]: Caught exception in launch (see debug for traceback): 'capabilities'

@mink007
Copy link

mink007 commented Mar 15, 2024

~/ws_moveit/install/moveit_configs_utils/lib/python3.10/site-packages/moveit_configs_utils/launches.py

added highlighted yellow line in above file
image

image

resolves this issue: "[ERROR] [launch]: Caught exception in launch (see debug for traceback): 'capabilities'"

@gitzhou2006go
Copy link

~/ws_moveit/install/moveit_configs_utils/lib/python3.10/site-packages/moveit_configs_utils/launches.py

added highlighted yellow line in above file image

image resolves this issue: "[ERROR] [launch]: Caught exception in launch (see debug for traceback): 'capabilities'"

Thank you for the correct solution! It resolved my issue.

@github-actions GitHub Actions
Copy link

This issue is being labeled as stale because it has been open 45 days with no activity. It will be automatically closed after another 45 days without follow-ups.

@github-actions github-actions bot added the stale Inactive issues and PRs are marked as stale and may be closed automatically. label May 10, 2024
@jixiexiaoli
Copy link

Hello, I met the same problem, how to solve it, thank you very much!

@mink007
Copy link

mink007 commented May 15, 2024

~/ws_moveit/install/moveit_configs_utils/lib/python3.10/site-packages/moveit_configs_utils/launches.py

added highlighted yellow line in above file
image

image resolves this issue: "[ERROR] [launch]: Caught exception in launch (see debug for traceback): 'capabilities'"

@jixiexiaoli
Copy link

~/ws_moveit/安装/moveit_configs_utils/lib/python3.10/site-packages/moveit_configs_utils/launches.py
在上面的文件中添加了突出显示的黄线
图像
图像解决了此问题：“[ERROR] [launch]：在启动中捕获异常（请参阅调试以获取回溯）：”capabilities“”

Thank you for your help.I've fixed this capabiliti issue, but I still can't load my model after opening it.Do you have a solution for this erro.
[rviz2-3] [ERROR] [1715739073.071318699] [moveit_rdf_loader.rdf_loader]: Unable to parse SRDF
[rviz2-3] [ERROR] [1715739073.101394782] [moveit_ros.planning_scene_monitor.planning_scene_monitor]: Robot model not loaded

@jixiexiaoli
Copy link

~/ws_moveit/安装/moveit_configs_utils/lib/python3.10/site-packages/moveit_configs_utils/launches.py
在上面的文件中添加了突出显示的黄线
图像
图像解决了此问题：“[ERROR] [launch]：在启动中捕获异常（请参阅调试以获取回溯）：”capabilities“”

Thank you for your help.I've fixed this capabiliti issue, but I still can't load my model after opening it.Do you have a solution for this erro. [rviz2-3] [ERROR] [1715739073.071318699] [moveit_rdf_loader.rdf_loader]: Unable to parse SRDF [rviz2-3] [ERROR] [1715739073.101394782] [moveit_ros.planning_scene_monitor.planning_scene_monitor]: Robot model not loaded

Uploading 微信图片_20240515101434.png…

@mink007
Copy link

mink007 commented May 15, 2024 •
edited
Loading

see if the location(unix path) of the model file (xacro/urdf) is as expected.
also the format of the xacro/urdf.

@github-actions github-actions bot removed the stale Inactive issues and PRs are marked as stale and may be closed automatically. label May 21, 2024
@AnishNavalgund
Copy link

I am also getting the same error. Please advise!

Below are the logs.

INFO] [launch]: Default logging verbosity is set to INFO
[INFO] [robot_state_publisher-1]: process started with pid [41805]
[INFO] [move_group-2]: process started with pid [41807]
[INFO] [rviz2-3]: process started with pid [41809]
[move_group-2] [WARN] [1717542851.019722879] [move_group.move_group]: Falling back to using the the move_group node namespace (deprecated behavior).
[robot_state_publisher-1] [INFO] [1717542851.025612211] [robot_state_publisher]: got segment base
[robot_state_publisher-1] [INFO] [1717542851.025666171] [robot_state_publisher]: got segment base_link
[robot_state_publisher-1] [INFO] [1717542851.025672141] [robot_state_publisher]: got segment flange
[robot_state_publisher-1] [INFO] [1717542851.025675891] [robot_state_publisher]: got segment link_1
[robot_state_publisher-1] [INFO] [1717542851.025679141] [robot_state_publisher]: got segment link_2
[robot_state_publisher-1] [INFO] [1717542851.025682171] [robot_state_publisher]: got segment link_3
[robot_state_publisher-1] [INFO] [1717542851.025685371] [robot_state_publisher]: got segment link_4
[robot_state_publisher-1] [INFO] [1717542851.025688451] [robot_state_publisher]: got segment link_5
[robot_state_publisher-1] [INFO] [1717542851.025691671] [robot_state_publisher]: got segment link_6
[robot_state_publisher-1] [INFO] [1717542851.025694721] [robot_state_publisher]: got segment tool0
[move_group-2] Error: Could not parse the SRDF XML File. Error=XML_ERROR_PARSING_TEXT ErrorID=8 (0x8) Line number=1
[move_group-2] at line 715 in ./src/model.cpp
[move_group-2] [ERROR] [1717542851.039141526] [moveit_rdf_loader.rdf_loader]: Unable to parse SRDF
[move_group-2] [ERROR] [1717542851.044008478] [moveit_ros.planning_scene_monitor.planning_scene_monitor]: Robot model not loaded
[move_group-2] [ERROR] [1717542851.044178098] [moveit.ros_planning_interface.moveit_cpp]: Planning scene not configured
[move_group-2] [FATAL] [1717542851.044188918] [moveit.ros_planning_interface.moveit_cpp]: Unable to configure planning scene monitor
[move_group-2] terminate called after throwing an instance of 'std::runtime_error'
[move_group-2] what(): Unable to configure planning scene monitor
[move_group-2] Stack trace (most recent call last):
[move_group-2] #12 Object "", at 0xffffffffffffffff, in
[move_group-2] #11 Object "/opt/ros/humble/lib/moveit_ros_move_group/move_group", at 0x5db3ee3e6724, in
[move_group-2] #10 Source "../csu/libc-start.c", line 392, in __libc_start_main_impl [0x7863f2629e3f]
[move_group-2] #9 Source "../sysdeps/nptl/libc_start_call_main.h", line 58, in __libc_start_call_main [0x7863f2629d8f]
[move_group-2] #8 Object "/opt/ros/humble/lib/moveit_ros_move_group/move_group", at 0x5db3ee3e52c2, in
[move_group-2] #7 Object "/opt/ros/humble/lib/libmoveit_cpp.so.2.5.5", at 0x7863f3220dd1, in
[move_group-2] #6 Object "/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.30", at 0x7863f2aae4d7, in __cxa_throw
[move_group-2] #5 Object "/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.30", at 0x7863f2aae276, in std::terminate()
[move_group-2] #4 Object "/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.30", at 0x7863f2aae20b, in
[move_group-2] #3 Object "/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.30", at 0x7863f2aa2b9d, in
[move_group-2] #2 Source "./stdlib/abort.c", line 79, in abort [0x7863f26287f2]
[move_group-2] #1 Source "../sysdeps/posix/raise.c", line 26, in raise [0x7863f2642475]
[move_group-2] #0 | Source "./nptl/pthread_kill.c", line 89, in __pthread_kill_internal
[move_group-2] | Source "./nptl/pthread_kill.c", line 78, in __pthread_kill_implementation
[move_group-2] Source "./nptl/pthread_kill.c", line 44, in __pthread_kill [0x7863f26969fc]
[move_group-2] Aborted (Signal sent by tkill() 41807 1000)
[ERROR] [move_group-2]: process has died [pid 41807, exit code -6, cmd '/opt/ros/humble/lib/moveit_ros_move_group/move_group --ros-args -r __node:=move_group --params-file /tmp/launch_params_u4lpxe4y'].
[rviz2-3] [INFO] [1717542851.639251333] [rviz2]: Stereo is NOT SUPPORTED
[rviz2-3] [INFO] [1717542851.639355624] [rviz2]: OpenGl version: 4.6 (GLSL 4.6)
[rviz2-3] [INFO] [1717542851.672795515] [rviz2]: Stereo is NOT SUPPORTED
[rviz2-3] Warning: class_loader.impl: SEVERE WARNING!!! A namespace collision has occurred with plugin factory for class rviz_default_plugins::displays::InteractiveMarkerDisplay. New factory will OVERWRITE existing one. This situation occurs when libraries containing plugins are directly linked against an executable (the one running right now generating this message). Please separate plugins out into their own library or just don't link against the library and use either class_loader::ClassLoader/MultiLibraryClassLoader to open.
[rviz2-3] at line 253 in /opt/ros/humble/include/class_loader/class_loader/class_loader_core.hpp
[rviz2-3] [ERROR] [1717542854.769990326] [moveit_ros_visualization.motion_planning_frame]: Action server: /recognize_objects not available
[rviz2-3] [INFO] [1717542854.798718286] [moveit_ros_visualization.motion_planning_frame]: MoveGroup namespace changed: / -> . Reloading params.
[rviz2-3] [WARN] [1717542854.843135251] [rcl.logging_rosout]: Publisher already registered for provided node name. If this is due to multiple nodes with the same name then all logs for that logger name will go out over the existing publisher. As soon as any node with that name is destructed it will unregister the publisher, preventing any further logs for that name from being published on the rosout topic.
[rviz2-3] [ERROR] [1717542864.892760455] [rviz2]: Could not find parameter robot_description_semantic and did not receive robot_description_semantic via std_msgs::msg::String subscription within 10,000000 seconds.
[rviz2-3] Error: Could not parse the SRDF XML File. Error=XML_ERROR_EMPTY_DOCUMENT ErrorID=13 (0xd) Line number=0
[rviz2-3] at line 715 in ./src/model.cpp
[rviz2-3] [ERROR] [1717542864.917802914] [moveit_rdf_loader.rdf_loader]: Unable to parse SRDF
[rviz2-3] [ERROR] [1717542864.932787459] [moveit_ros.planning_scene_monitor.planning_scene_monitor]: Robot model not loaded

@jixiexiaoli
Copy link

I am also getting the same error. Please advise!

Below are the logs.

INFO] [launch]: Default logging verbosity is set to INFO [INFO] [robot_state_publisher-1]: process started with pid [41805] [INFO] [move_group-2]: process started with pid [41807] [INFO] [rviz2-3]: process started with pid [41809] [move_group-2] [WARN] [1717542851.019722879] [move_group.move_group]: Falling back to using the the move_group node namespace (deprecated behavior). [robot_state_publisher-1] [INFO] [1717542851.025612211] [robot_state_publisher]: got segment base [robot_state_publisher-1] [INFO] [1717542851.025666171] [robot_state_publisher]: got segment base_link [robot_state_publisher-1] [INFO] [1717542851.025672141] [robot_state_publisher]: got segment flange [robot_state_publisher-1] [INFO] [1717542851.025675891] [robot_state_publisher]: got segment link_1 [robot_state_publisher-1] [INFO] [1717542851.025679141] [robot_state_publisher]: got segment link_2 [robot_state_publisher-1] [INFO] [1717542851.025682171] [robot_state_publisher]: got segment link_3 [robot_state_publisher-1] [INFO] [1717542851.025685371] [robot_state_publisher]: got segment link_4 [robot_state_publisher-1] [INFO] [1717542851.025688451] [robot_state_publisher]: got segment link_5 [robot_state_publisher-1] [INFO] [1717542851.025691671] [robot_state_publisher]: got segment link_6 [robot_state_publisher-1] [INFO] [1717542851.025694721] [robot_state_publisher]: got segment tool0 [move_group-2] Error: Could not parse the SRDF XML File. Error=XML_ERROR_PARSING_TEXT ErrorID=8 (0x8) Line number=1 [move_group-2] at line 715 in ./src/model.cpp [move_group-2] [ERROR] [1717542851.039141526] [moveit_rdf_loader.rdf_loader]: Unable to parse SRDF [move_group-2] [ERROR] [1717542851.044008478] [moveit_ros.planning_scene_monitor.planning_scene_monitor]: Robot model not loaded [move_group-2] [ERROR] [1717542851.044178098] [moveit.ros_planning_interface.moveit_cpp]: Planning scene not configured [move_group-2] [FATAL] [1717542851.044188918] [moveit.ros_planning_interface.moveit_cpp]: Unable to configure planning scene monitor [move_group-2] terminate called after throwing an instance of 'std::runtime_error' [move_group-2] what(): Unable to configure planning scene monitor [move_group-2] Stack trace (most recent call last): [move_group-2] #12 Object "", at 0xffffffffffffffff, in [move_group-2] #11 Object "/opt/ros/humble/lib/moveit_ros_move_group/move_group", at 0x5db3ee3e6724, in [move_group-2] #10 Source "../csu/libc-start.c", line 392, in __libc_start_main_impl [0x7863f2629e3f] [move_group-2] #9 Source "../sysdeps/nptl/libc_start_call_main.h", line 58, in __libc_start_call_main [0x7863f2629d8f] [move_group-2] #8 Object "/opt/ros/humble/lib/moveit_ros_move_group/move_group", at 0x5db3ee3e52c2, in [move_group-2] #7 Object "/opt/ros/humble/lib/libmoveit_cpp.so.2.5.5", at 0x7863f3220dd1, in [move_group-2] #6 Object "/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.30", at 0x7863f2aae4d7, in __cxa_throw [move_group-2] #5 Object "/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.30", at 0x7863f2aae276, in std::terminate() [move_group-2] #4 Object "/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.30", at 0x7863f2aae20b, in [move_group-2] #3 Object "/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.30", at 0x7863f2aa2b9d, in [move_group-2] #2 Source "./stdlib/abort.c", line 79, in abort [0x7863f26287f2] [move_group-2] #1 Source "../sysdeps/posix/raise.c", line 26, in raise [0x7863f2642475] [move_group-2] #0 | Source "./nptl/pthread_kill.c", line 89, in __pthread_kill_internal [move_group-2] | Source "./nptl/pthread_kill.c", line 78, in __pthread_kill_implementation [move_group-2] Source "./nptl/pthread_kill.c", line 44, in __pthread_kill [0x7863f26969fc] [move_group-2] Aborted (Signal sent by tkill() 41807 1000) [ERROR] [move_group-2]: process has died [pid 41807, exit code -6, cmd '/opt/ros/humble/lib/moveit_ros_move_group/move_group --ros-args -r __node:=move_group --params-file /tmp/launch_params_u4lpxe4y']. [rviz2-3] [INFO] [1717542851.639251333] [rviz2]: Stereo is NOT SUPPORTED [rviz2-3] [INFO] [1717542851.639355624] [rviz2]: OpenGl version: 4.6 (GLSL 4.6) [rviz2-3] [INFO] [1717542851.672795515] [rviz2]: Stereo is NOT SUPPORTED [rviz2-3] Warning: class_loader.impl: SEVERE WARNING!!! A namespace collision has occurred with plugin factory for class rviz_default_plugins::displays::InteractiveMarkerDisplay. New factory will OVERWRITE existing one. This situation occurs when libraries containing plugins are directly linked against an executable (the one running right now generating this message). Please separate plugins out into their own library or just don't link against the library and use either class_loader::ClassLoader/MultiLibraryClassLoader to open. [rviz2-3] at line 253 in /opt/ros/humble/include/class_loader/class_loader/class_loader_core.hpp [rviz2-3] [ERROR] [1717542854.769990326] [moveit_ros_visualization.motion_planning_frame]: Action server: /recognize_objects not available [rviz2-3] [INFO] [1717542854.798718286] [moveit_ros_visualization.motion_planning_frame]: MoveGroup namespace changed: / -> . Reloading params. [rviz2-3] [WARN] [1717542854.843135251] [rcl.logging_rosout]: Publisher already registered for provided node name. If this is due to multiple nodes with the same name then all logs for that logger name will go out over the existing publisher. As soon as any node with that name is destructed it will unregister the publisher, preventing any further logs for that name from being published on the rosout topic. [rviz2-3] [ERROR] [1717542864.892760455] [rviz2]: Could not find parameter robot_description_semantic and did not receive robot_description_semantic via std_msgs::msg::String subscription within 10,000000 seconds. [rviz2-3] Error: Could not parse the SRDF XML File. Error=XML_ERROR_EMPTY_DOCUMENT ErrorID=13 (0xd) Line number=0 [rviz2-3] at line 715 in ./src/model.cpp [rviz2-3] [ERROR] [1717542864.917802914] [moveit_rdf_loader.rdf_loader]: Unable to parse SRDF [rviz2-3] [ERROR] [1717542864.932787459] [moveit_ros.planning_scene_monitor.planning_scene_monitor]: Robot model not loaded

Change the speed value in URDF file to double type, for example, change V=1 to V=1.000001

@AnishNavalgund
Copy link

@jixiexiaoli Do you mean in the yaml file? I have done that and I still get the same error messages.

@jixiexiaoli
Copy link

@jixiexiaoli Do you mean in the yaml file? I have done that and I still get the same error messages.

URDF file

@AlessioToniolo
Copy link

Anyone fix this error yet?

@vovaberdibek
Copy link

We having the same error : [rviz2-1] Failed to parse robot description using: urdf_xml_parser/URDFXMLParser
[rviz2-1] [INFO] [1720775001.712050596] [moveit_rdf_loader.rdf_loader]: Unable to parse URDF
please someone knows how to fix it ?

@calupino
Copy link

calupino commented Sep 4, 2024

So I ran into this issue when trying to add joint limits to an SRDF for a custom arm I'm building. The default joint_limits.yaml file has all the limits set to "false" and the maximum values set to "0". The model loads just fine. However if I want to set the limits to "true" and assign them a value of "1.0" then I get the same error everyone else in this thread is getting where it's unable to parse the SRDF.

@github-actions GitHub Actions
Copy link

This issue is being labeled as stale because it has been open 45 days with no activity. It will be automatically closed after another 45 days without follow-ups.

@github-actions github-actions bot added the stale Inactive issues and PRs are marked as stale and may be closed automatically. label Oct 23, 2024
@mikeferguson
Copy link
Contributor

#2803 fixes the invalid cast - but was never back ported to humble - I just opened #3038 to do that. There are a few other unrelated failures posted as comments above, but I think those would be better debugged in their own tickets

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
stale Inactive issues and PRs are marked as stale and may be closed automatically.
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests