migrate_v5_CN_http callback

HOME > CN > HTTP Callback

HTTPCallback

Note: 如果觉得Github的Wiki访问太慢，可以访问 Gitee 镜像。

服务器端定制的实现方式，就是HTTP回调。譬如当客户端连接到SRS时，回调指定的http地址，这样可以实现验证功能。

关于Token认证，即基于http回调的认证，参考：Token Authentication

Compile

SRS总是开启HttpCallback。

参考：Build

Config SRS

http hooks的配置如下：

vhost your_vhost {
    http_hooks {
        # whether the http hooks enable.
        # default off.
        enabled         on;
        # when client connect to vhost/app, call the hook,
        # the request in the POST data string is a object encode by json:
        #       {
        #           "action": "on_connect",
        #           "client_id": 1985,
        #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
        #           "tcUrl": "rtmp://video.test.com/live?key=d2fa801d08e3f90ed1e1670e6e52651a",
        #           "pageUrl": "http://www.test.com/live.html"
        #       }
        # if valid, the hook must return HTTP code 200(Status OK) and response
        # an int value specifies the error code(0 corresponding to success):
        #       0
        # support multiple api hooks, format:
        #       on_connect http://xxx/api0 http://xxx/api1 http://xxx/apiN
        # @remark For SRS4, the HTTPS url is supported, for example:
        #       on_connect https://xxx/api0 https://xxx/api1 https://xxx/apiN
        on_connect      http://127.0.0.1:8085/api/v1/clients http://localhost:8085/api/v1/clients;
        # when client close/disconnect to vhost/app/stream, call the hook,
        # the request in the POST data string is a object encode by json:
        #       {
        #           "action": "on_close",
        #           "client_id": 1985,
        #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
        #           "send_bytes": 10240, "recv_bytes": 10240
        #       }
        # if valid, the hook must return HTTP code 200(Status OK) and response
        # an int value specifies the error code(0 corresponding to success):
        #       0
        # support multiple api hooks, format:
        #       on_close http://xxx/api0 http://xxx/api1 http://xxx/apiN
        # @remark For SRS4, the HTTPS url is supported, for example:
        #       on_close https://xxx/api0 https://xxx/api1 https://xxx/apiN
        on_close        http://127.0.0.1:8085/api/v1/clients http://localhost:8085/api/v1/clients;
        # when client(encoder) publish to vhost/app/stream, call the hook,
        # the request in the POST data string is a object encode by json:
        #       {
        #           "action": "on_publish",
        #           "client_id": 1985,
        #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
        #           "stream": "livestream", "param":"?token=xxx&salt=yyy"
        #       }
        # if valid, the hook must return HTTP code 200(Status OK) and response
        # an int value specifies the error code(0 corresponding to success):
        #       0
        # support multiple api hooks, format:
        #       on_publish http://xxx/api0 http://xxx/api1 http://xxx/apiN
        # @remark For SRS4, the HTTPS url is supported, for example:
        #       on_publish https://xxx/api0 https://xxx/api1 https://xxx/apiN
        on_publish      http://127.0.0.1:8085/api/v1/streams http://localhost:8085/api/v1/streams;
        # when client(encoder) stop publish to vhost/app/stream, call the hook,
        # the request in the POST data string is a object encode by json:
        #       {
        #           "action": "on_unpublish",
        #           "client_id": 1985,
        #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
        #           "stream": "livestream", "param":"?token=xxx&salt=yyy"
        #       }
        # if valid, the hook must return HTTP code 200(Status OK) and response
        # an int value specifies the error code(0 corresponding to success):
        #       0
        # support multiple api hooks, format:
        #       on_unpublish http://xxx/api0 http://xxx/api1 http://xxx/apiN
        # @remark For SRS4, the HTTPS url is supported, for example:
        #       on_unpublish https://xxx/api0 https://xxx/api1 https://xxx/apiN
        on_unpublish    http://127.0.0.1:8085/api/v1/streams http://localhost:8085/api/v1/streams;
        # when client start to play vhost/app/stream, call the hook,
        # the request in the POST data string is a object encode by json:
        #       {
        #           "action": "on_play",
        #           "client_id": 1985,
        #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
        #           "stream": "livestream", "param":"?token=xxx&salt=yyy",
        #           "pageUrl": "http://www.test.com/live.html"
        #       }
        # if valid, the hook must return HTTP code 200(Status OK) and response
        # an int value specifies the error code(0 corresponding to success):
        #       0
        # support multiple api hooks, format:
        #       on_play http://xxx/api0 http://xxx/api1 http://xxx/apiN
        # @remark For SRS4, the HTTPS url is supported, for example:
        #       on_play https://xxx/api0 https://xxx/api1 https://xxx/apiN
        on_play         http://127.0.0.1:8085/api/v1/sessions http://localhost:8085/api/v1/sessions;
        # when client stop to play vhost/app/stream, call the hook,
        # the request in the POST data string is a object encode by json:
        #       {
        #           "action": "on_stop",
        #           "client_id": 1985,
        #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
        #           "stream": "livestream", "param":"?token=xxx&salt=yyy"
        #       }
        # if valid, the hook must return HTTP code 200(Status OK) and response
        # an int value specifies the error code(0 corresponding to success):
        #       0
        # support multiple api hooks, format:
        #       on_stop http://xxx/api0 http://xxx/api1 http://xxx/apiN
        # @remark For SRS4, the HTTPS url is supported, for example:
        #       on_stop https://xxx/api0 https://xxx/api1 https://xxx/apiN
        on_stop         http://127.0.0.1:8085/api/v1/sessions http://localhost:8085/api/v1/sessions;
        # when srs reap a dvr file, call the hook,
        # the request in the POST data string is a object encode by json:
        #       {
        #           "action": "on_dvr",
        #           "client_id": 1985,
        #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
        #           "stream": "livestream", "param":"?token=xxx&salt=yyy",
        #           "cwd": "/usr/local/srs",
        #           "file": "./objs/nginx/html/live/livestream.1420254068776.flv"
        #       }
        # if valid, the hook must return HTTP code 200(Status OK) and response
        # an int value specifies the error code(0 corresponding to success):
        #       0
        on_dvr          http://127.0.0.1:8085/api/v1/dvrs http://localhost:8085/api/v1/dvrs;
        # when srs reap a ts file of hls, call the hook,
        # the request in the POST data string is a object encode by json:
        #       {
        #           "action": "on_hls",
        #           "client_id": 1985,
        #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
        #           "stream": "livestream", "param":"?token=xxx&salt=yyy",
        #           "duration": 9.36, // in seconds
        #           "cwd": "/usr/local/srs",
        #           "file": "./objs/nginx/html/live/livestream/2015-04-23/01/476584165.ts",
        #           "url": "live/livestream/2015-04-23/01/476584165.ts",
        #           "m3u8": "./objs/nginx/html/live/livestream/live.m3u8",
        #           "m3u8_url": "live/livestream/live.m3u8",
        #           "seq_no": 100
        #       }
        # if valid, the hook must return HTTP code 200(Status OK) and response
        # an int value specifies the error code(0 corresponding to success):
        #       0
        on_hls          http://127.0.0.1:8085/api/v1/hls http://localhost:8085/api/v1/hls;
        # when srs reap a ts file of hls, call this hook,
        # used to push file to cdn network, by get the ts file from cdn network.
        # so we use HTTP GET and use the variable following:
        #       [app], replace with the app.
        #       [stream], replace with the stream.
        #       [param], replace with the param.
        #       [ts_url], replace with the ts url.
        # ignore any return data of server.
        # @remark random select a url to report, not report all.
        on_hls_notify   http://127.0.0.1:8085/api/v1/hls/[app]/[stream]/[ts_url][param];
    }
}

备注：可以参考conf/full.conf配置文件中的hooks.callback.vhost.com实例。

HTTP callback events

SRS的回调事件包括：

事件	数据	说明
on_connect	{ "action": "on_connect", "client_id": 1985, "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live", "tcUrl": "rtmp://x/x?key=xxx", "pageUrl": "http://x/x.html" }	当客户端连接到指定的vhost和app时
on_close	{ "action": "on_close", "client_id": 1985, "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live", "send_bytes": 10240, "recv_bytes": 10240 }	当客户端关闭连接，或者SRS主动关闭连接时
on_publish	{ "action": "on_publish", "client_id": 1985, "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live", "stream": "livestream" }	当客户端发布流时，譬如flash/FMLE方式推流到服务器
on_unpublish	{ "action": "on_unpublish", "client_id": 1985, "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live", "stream": "livestream" }	当客户端停止发布流时
on_play	{ "action": "on_play", "client_id": 1985, "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live", "stream": "livestream", "pageUrl": "http://a.com/i.html", "param":"?k=v" }	当客户端开始播放流时
on_stop	{ "action": "on_stop", "client_id": 1985, "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live", "stream": "livestream" }	当客户端停止播放时
on_dvr	{ "action": "on_dvr", "client_id": 1985, "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live", "stream": "livestream", "cwd": "/opt", "file": "./l.xxx.flv" }	当DVR录制关闭一个flv文件时

其中，

事件：发生该事件时，即回调指定的HTTP地址。
HTTP地址：可以支持多个，以空格分隔，SRS会依次回调这些接口。
数据：SRS将数据POST到HTTP接口。
返回值：SRS要求HTTP服务器返回HTTP200并且response内容为整数错误码（0表示成功），其他错误码会断开客户端连接。

SRS HTTP Callback Server

SRS自带了一个默认的处理HTTP Callback的服务器，启动时需要指定端口，譬如8085端口。

启动方法：python research/api-server/server.py 8085

启动日志如下：

[winlin@dev6 srs]$ python research/api-server/server.py 8085
[2014-02-27 09:42:25][trace] api server listen at port: 8085, static_dir: /home/winlin/git/srs/trunk/research/api-server/static-dir
[2014-02-27 09:42:25][trace] start cherrypy server
[27/Feb/2014:09:42:25] ENGINE Listening for SIGHUP.
[27/Feb/2014:09:42:25] ENGINE Listening for SIGTERM.
[27/Feb/2014:09:42:25] ENGINE Listening for SIGUSR1.
[27/Feb/2014:09:42:25] ENGINE Bus STARTING
[27/Feb/2014:09:42:25] ENGINE Started monitor thread '_TimeoutMonitor'.
[27/Feb/2014:09:42:25] ENGINE Started monitor thread 'Autoreloader'.
[27/Feb/2014:09:42:25] ENGINE Serving on 0.0.0.0:8085
[27/Feb/2014:09:42:25] ENGINE Bus STARTED

Remark: For SRS4, the HTTP/HTTPS url is supported, see #1657.

HTTPS Callback

SRS4支持HTTPS回调，只需要简单的将回调地址，从http://改成https://即可，比如：

vhost your_vhost {
    http_hooks {
        enabled         on;
        on_connect      https://127.0.0.1:8085/api/v1/clients;
        on_close        https://127.0.0.1:8085/api/v1/clients;
        on_publish      https://127.0.0.1:8085/api/v1/streams;
        on_unpublish    https://127.0.0.1:8085/api/v1/streams;
        on_play         https://127.0.0.1:8085/api/v1/sessions;
        on_stop         https://127.0.0.1:8085/api/v1/sessions;
        on_dvr          https://127.0.0.1:8085/api/v1/dvrs;
        on_hls          https://127.0.0.1:8085/api/v1/hls;
        on_hls_notify   https://127.0.0.1:8085/api/v1/hls/[app]/[stream]/[ts_url][param];
    }
}

Publish and Play

推流到SRS时，会调用HTTP接口：

[2014-02-27 09:41:33][trace] post to clients, req={"action":"on_connect","client_id":4,"ip":"192.168.1.179","vhost":"__defaultVhost__","app":"live","pageUrl":""}
[2014-02-27 09:41:33][trace] srs on_connect: client id=4, ip=192.168.1.179, vhost=__defaultVhost__, app=live, pageUrl=
127.0.0.1 - - [27/Feb/2014:09:41:33] "POST /api/v1/clients HTTP/1.1" 200 1 "" "srs(simple rtmp server)0.9.2"

播放SRS的流时，也会调用HTTP接口：

[2014-02-27 09:41:50][trace] post to clients, req={"action":"on_connect","client_id":5,"ip":"192.168.1.179","vhost":"__defaultVhost__","app":"live","pageUrl":"http://dev.chnvideo.com:3080/players/rtmp/"}
[2014-02-27 09:41:50][trace] srs on_connect: client id=5, ip=192.168.1.179, vhost=__defaultVhost__, app=live, pageUrl=http://dev.chnvideo.com:3080/players/rtmp/
127.0.0.1 - - [27/Feb/2014:09:41:50] "POST /api/v1/clients HTTP/1.1" 200 1 "" "srs(simple rtmp server)0.9.2"

Response

如果回调成功，必须响应正确的格式的数值，否则就会返回错误给客户端导致推流或播放失败。也可以参考HTTP API。格式是：

HTTP/200, 必须返回200否则认为是错误。
并且，响应的内容必须是int值0，或者是JSON对象带字段code值为0。

比如：

HTTP/1.1 200 OK
Content-Length: 1
0

或者：

HTTP/1.1 200 OK
Content-Length: 11
{"code": 0}

可以查看实例回调的响应：

cd srs/trunk
python research/api-server/server.py 8085

你会明白什么是正确的响应格式。

Snapshot

HttpCallback也可以用来截图，参考snapshot

Winlin 2015.1

Welcome to SRS wiki!

SRS 5.0 wiki

Please select your language:

SRS 5.0 English
SRS 5.0 Chinese 中文文档

SRS 4.0 wiki

Please select your language:

SRS 4.0 English
SRS 4.0 Chinese 中文文档

SRS 3.0 wiki

Please select your language:

SRS 3.0 English
SRS 3.0 Chinese中文文档

SRS 2.0 wiki

Please select your language:

SRS 2.0 English
SRS 2.0 Chinese中文文档

SRS 1.0 wiki

Please select your language:

SRS 1.0 English
SRS 1.0 Chinese 中文文档

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

migrate_v5_CN_http callback

HTTPCallback

Compile

Config SRS

HTTP callback events

SRS HTTP Callback Server

HTTPS Callback

Publish and Play

Response

Snapshot

SRS 5.0 wiki

SRS 4.0 wiki

SRS 3.0 wiki

SRS 2.0 wiki

SRS 1.0 wiki

Clone this wiki locally