Cifsd fixes #11

namjaejeon · 2020-10-14T12:13:57Z

Description for this pull request:

Fix build error with linux 5.9 kernel.
Fix rcu warning when lockdep is enable.

…sockopt() There has been a build error since merging "net: add a new sockptr_t type" patch into 5.9 kernel. In create_socket(), pass a sockptr_t using KERNEL_SOCKPTR instead of a plain user pointer into sock_setsockopt(). Signed-off-by: Namjae Jeon <[email protected]>

fix the following lockdep warning. [ 1167.543552] ============================= [ 1167.543554] WARNING: suspicious RCU usage [ 1167.543558] 5.8.0-rc6+ smfrench#2 Tainted: G OE [ 1167.543560] ----------------------------- [ 1167.543563] /home/linkinjeon/git/smbd_work/acls/ksmbd/smb2pdu.c:3014 suspicious rcu_dereference_check() usage! Reported-by: Namjae Jeon <[email protected]> Signed-off-by: Hyunchul Lee <[email protected]> Signed-off-by: Namjae Jeon <[email protected]>

This fix is for a failure that occurred in the DWARF unwind perf test. Stack unwinders may probe memory when looking for frames. Memory sanitizer will poison and track uninitialized memory on the stack, and on the heap if the value is copied to the heap. This can lead to false memory sanitizer failures for the use of an uninitialized value. Avoid this problem by removing the poison on the copied stack. The full msan failure with track origins looks like: ==2168==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x559ceb10755b in handle_cfi elfutils/libdwfl/frame_unwind.c:648:8 #1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #23 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceb106acf in __libdwfl_frame_reg_set elfutils/libdwfl/frame_unwind.c:77:22 #1 0x559ceb106acf in handle_cfi elfutils/libdwfl/frame_unwind.c:627:13 #2 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #3 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #4 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #5 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #6 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #7 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #8 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #9 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #10 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #11 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #12 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #13 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #14 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #15 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #16 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #17 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #18 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #19 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #20 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #21 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #22 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #23 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #24 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceb106a54 in handle_cfi elfutils/libdwfl/frame_unwind.c:613:9 #1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #23 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceaff8800 in memory_read tools/perf/util/unwind-libdw.c:156:10 #1 0x559ceb10f053 in expr_eval elfutils/libdwfl/frame_unwind.c:501:13 #2 0x559ceb1060cc in handle_cfi elfutils/libdwfl/frame_unwind.c:603:18 #3 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #4 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #5 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #6 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #7 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #8 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #9 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #10 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #11 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #12 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #13 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #14 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #15 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #16 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #17 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #18 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #19 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #20 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #21 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #22 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #23 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #24 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #25 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559cea9027d9 in __msan_memcpy llvm/llvm-project/compiler-rt/lib/msan/msan_interceptors.cpp:1558:3 #1 0x559cea9d2185 in sample_ustack tools/perf/arch/x86/tests/dwarf-unwind.c:41:2 #2 0x559cea9d202c in test__arch_unwind_sample tools/perf/arch/x86/tests/dwarf-unwind.c:72:9 #3 0x559ceabc9cbd in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:106:6 #4 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #5 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #6 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #7 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #8 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #9 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #10 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #11 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #12 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #13 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #14 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #15 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #16 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #17 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was created by an allocation of 'bf' in the stack frame of function 'perf_event__synthesize_mmap_events' #0 0x559ceafc5f60 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:445 SUMMARY: MemorySanitizer: use-of-uninitialized-value elfutils/libdwfl/frame_unwind.c:648:8 in handle_cfi Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: [email protected] Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sandeep Dasgupta <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

Currently 'while (q->queued > 0)' loop was removed from mt76u_stop_tx() code. This causes crash on device removal as we try to cleanup empty queue: [ 96.495571] kernel BUG at include/linux/skbuff.h:2297! [ 96.498983] invalid opcode: 0000 [#1] SMP PTI [ 96.501162] CPU: 3 PID: 27 Comm: kworker/3:0 Not tainted 5.10.0-rc5+ #11 [ 96.502754] Hardware name: LENOVO 20DGS08H00/20DGS08H00, BIOS J5ET48WW (1.19 ) 08/27/2015 [ 96.504378] Workqueue: usb_hub_wq hub_event [ 96.505983] RIP: 0010:skb_pull+0x2d/0x30 [ 96.507576] Code: 00 00 8b 47 70 39 c6 77 1e 29 f0 89 47 70 3b 47 74 72 17 48 8b 87 c8 00 00 00 89 f6 48 01 f0 48 89 87 c8 00 00 00 c3 31 c0 c3 <0f> 0b 90 0f 1f 44 00 00 53 48 89 fb 48 8b bf c8 00 00 00 8b 43 70 [ 96.509296] RSP: 0018:ffffb11b801639b8 EFLAGS: 00010287 [ 96.511038] RAX: 000000001c6939ed RBX: ffffb11b801639f8 RCX: 0000000000000000 [ 96.512964] RDX: ffffb11b801639f8 RSI: 0000000000000018 RDI: ffff90c64e4fb800 [ 96.514710] RBP: ffff90c654551ee0 R08: ffff90c652bce7a8 R09: ffffb11b80163728 [ 96.516450] R10: 0000000000000001 R11: 0000000000000001 R12: ffff90c64e4fb800 [ 96.519749] R13: 0000000000000010 R14: 0000000000000020 R15: ffff90c64e352ce8 [ 96.523455] FS: 0000000000000000(0000) GS:ffff90c96eec0000(0000) knlGS:0000000000000000 [ 96.527171] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 96.530900] CR2: 0000242556f18288 CR3: 0000000146a10002 CR4: 00000000003706e0 [ 96.534678] Call Trace: [ 96.538418] mt76x02u_tx_complete_skb+0x1f/0x50 [mt76x02_usb] [ 96.542231] mt76_queue_tx_complete+0x23/0x50 [mt76] [ 96.546028] mt76u_stop_tx.cold+0x71/0xa2 [mt76_usb] [ 96.549797] mt76x0u_stop+0x2f/0x90 [mt76x0u] [ 96.553638] drv_stop+0x33/0xd0 [mac80211] [ 96.557449] ieee80211_do_stop+0x558/0x860 [mac80211] [ 96.561262] ? dev_deactivate_many+0x298/0x2d0 [ 96.565101] ieee80211_stop+0x16/0x20 [mac80211] Fix that by adding while loop again. We need loop, not just single check, to clean all pending entries. Additionally move mt76_worker_disable/enable after !mt76_has_tx_pending() as we want to tx_worker to run to process tx queues, while we wait for exactly that. I was a bit worried about accessing q->queued without lock, but mt76_worker_disable() -> kthread_park() should assure this value will be seen updated on other cpus. Fixes: fe5b5ab ("mt76: unify queue tx cleanup code") Signed-off-by: Stanislaw Gruszka <[email protected]> Acked-by: Felix Fietkau <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]

Calling btrfs_qgroup_reserve_meta_prealloc from btrfs_delayed_inode_reserve_metadata can result in flushing delalloc while holding a transaction and delayed node locks. This is deadlock prone. In the past multiple commits: * ae5e070 ("btrfs: qgroup: don't try to wait flushing if we're already holding a transaction") * 6f23277 ("btrfs: qgroup: don't commit transaction when we already hold the handle") Tried to solve various aspects of this but this was always a whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock scenario involving btrfs_delayed_node::mutex. Namely, one thread can call btrfs_dirty_inode as a result of reading a file and modifying its atime: PID: 6963 TASK: ffff8c7f3f94c000 CPU: 2 COMMAND: "test" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_timeout at ffffffffa52a1bdd #3 wait_for_completion at ffffffffa529eeea <-- sleeps with delayed node mutex held #4 start_delalloc_inodes at ffffffffc0380db5 #5 btrfs_start_delalloc_snapshot at ffffffffc0393836 #6 try_flush_qgroup at ffffffffc03f04b2 #7 __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6 <-- tries to reserve space and starts delalloc inodes. #8 btrfs_delayed_update_inode at ffffffffc03e31aa <-- acquires delayed node mutex #9 btrfs_update_inode at ffffffffc0385ba8 #10 btrfs_dirty_inode at ffffffffc038627b <-- TRANSACTIION OPENED #11 touch_atime at ffffffffa4cf0000 #12 generic_file_read_iter at ffffffffa4c1f123 #13 new_sync_read at ffffffffa4ccdc8a #14 vfs_read at ffffffffa4cd0849 #15 ksys_read at ffffffffa4cd0bd1 #16 do_syscall_64 at ffffffffa4a052eb #17 entry_SYSCALL_64_after_hwframe at ffffffffa540008c This will cause an asynchronous work to flush the delalloc inodes to happen which can try to acquire the same delayed_node mutex: PID: 455 TASK: ffff8c8085fa4000 CPU: 5 COMMAND: "kworker/u16:30" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_preempt_disabled at ffffffffa529e80a #3 __mutex_lock at ffffffffa529fdcb <-- goes to sleep, never wakes up. #4 btrfs_delayed_update_inode at ffffffffc03e3143 <-- tries to acquire the mutex #5 btrfs_update_inode at ffffffffc0385ba8 <-- this is the same inode that pid 6963 is holding #6 cow_file_range_inline.constprop.78 at ffffffffc0386be7 #7 cow_file_range at ffffffffc03879c1 #8 btrfs_run_delalloc_range at ffffffffc038894c #9 writepage_delalloc at ffffffffc03a3c8f #10 __extent_writepage at ffffffffc03a4c01 #11 extent_write_cache_pages at ffffffffc03a500b #12 extent_writepages at ffffffffc03a6de2 #13 do_writepages at ffffffffa4c277eb #14 __filemap_fdatawrite_range at ffffffffa4c1e5bb #15 btrfs_run_delalloc_work at ffffffffc0380987 <-- starts running delayed nodes #16 normal_work_helper at ffffffffc03b706c #17 process_one_work at ffffffffa4aba4e4 #18 worker_thread at ffffffffa4aba6fd #19 kthread at ffffffffa4ac0a3d #20 ret_from_fork at ffffffffa54001ff To fully address those cases the complete fix is to never issue any flushing while holding the transaction or the delayed node lock. This patch achieves it by calling qgroup_reserve_meta directly which will either succeed without flushing or will fail and return -EDQUOT. In the latter case that return value is going to be propagated to btrfs_dirty_inode which will fallback to start a new transaction. That's fine as the majority of time we expect the inode will have BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly copying the in-memory state. Fixes: c53e965 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT") CC: [email protected] # 5.10+ Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Nikolay Borisov <[email protected]> Signed-off-by: David Sterba <[email protected]>

The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. # perf test -v 4 4: Read samples using the mmap interface : --- start --- test child forked, pid 139782 mmap size 528384B ================================================================= ==139782==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f1f76daee8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x564ba21a0fea in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x564ba21a1a0f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x564ba21a21cf in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x564ba21a21cf in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x564ba1e48298 in test__basic_mmap tests/mmap-basic.c:55 #6 0x564ba1e278fb in run_test tests/builtin-test.c:428 #7 0x564ba1e278fb in test_and_print tests/builtin-test.c:458 #8 0x564ba1e29a53 in __cmd_test tests/builtin-test.c:679 #9 0x564ba1e29a53 in cmd_test tests/builtin-test.c:825 #10 0x564ba1e95cb4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x564ba1d1fa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x564ba1d1fa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x564ba1d1fa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7f1f768e4d09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Read samples using the mmap interface: FAILED! failed to open shell test directory: /home/namhyung/libexec/perf-core/tests/shell Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Alexander Shishkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. Also change the goto label since it doesn't need to have two. # perf test -v 24 24: Number of exit events of a simple workload : --- start --- test child forked, pid 145915 mmap size 528384B ================================================================= ==145915==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fc44e50d1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164 #1 0x561cf50f4d2e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23 #2 0x561cf4eeb949 in thread_map__new_by_tid util/thread_map.c:63 #3 0x561cf4db7fd2 in test__task_exit tests/task-exit.c:74 #4 0x561cf4d798fb in run_test tests/builtin-test.c:428 #5 0x561cf4d798fb in test_and_print tests/builtin-test.c:458 #6 0x561cf4d7ba53 in __cmd_test tests/builtin-test.c:679 #7 0x561cf4d7ba53 in cmd_test tests/builtin-test.c:825 #8 0x561cf4de7d04 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #9 0x561cf4c71a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #10 0x561cf4c71a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #11 0x561cf4c71a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #12 0x7fc44e042d09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Number of exit events of a simple workload: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. Also change the goto label since it doesn't need to have two. # perf test -v 25 25: Software clock events period values : --- start --- test child forked, pid 149154 mmap size 528384B mmap size 528384B ================================================================= ==149154==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fef5cd071f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164 #1 0x56260d5e8b8e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23 #2 0x56260d3df7a9 in thread_map__new_by_tid util/thread_map.c:63 #3 0x56260d2ac6b2 in __test__sw_clock_freq tests/sw-clock.c:65 #4 0x56260d26d8fb in run_test tests/builtin-test.c:428 #5 0x56260d26d8fb in test_and_print tests/builtin-test.c:458 #6 0x56260d26fa53 in __cmd_test tests/builtin-test.c:679 #7 0x56260d26fa53 in cmd_test tests/builtin-test.c:825 #8 0x56260d2dbb64 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #9 0x56260d165a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #10 0x56260d165a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #11 0x56260d165a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #12 0x7fef5c83cd09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Software clock events period values : FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. Note that this test still has memory leaks in DSOs so it still fails even after this change. I'll take a look at that too. # perf test -v 26 26: Object code reading : --- start --- test child forked, pid 154184 Looking at the vmlinux_path (8 entries long) symsrc__init: build id mismatch for vmlinux. symsrc__init: cannot get elf header. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols Parsing event 'cycles' mmap size 528384B ... ================================================================= ==154184==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fcb66e77037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x55ad9b7e821e in dso__new_id util/dso.c:1256 #2 0x55ad9b8cfd4a in __machine__addnew_vdso util/vdso.c:132 #3 0x55ad9b8cfd4a in machine__findnew_vdso util/vdso.c:347 #4 0x55ad9b845b7e in map__new util/map.c:176 #5 0x55ad9b8415a2 in machine__process_mmap2_event util/machine.c:1787 #6 0x55ad9b8fab16 in perf_tool__process_synth_event util/synthetic-events.c:64 #7 0x55ad9b8fab16 in perf_event__synthesize_mmap_events util/synthetic-events.c:499 #8 0x55ad9b8fbfdf in __event__synthesize_thread util/synthetic-events.c:741 #9 0x55ad9b8ff3e3 in perf_event__synthesize_thread_map util/synthetic-events.c:833 #10 0x55ad9b738585 in do_test_code_reading tests/code-reading.c:608 #11 0x55ad9b73b25d in test__code_reading tests/code-reading.c:722 #12 0x55ad9b6f28fb in run_test tests/builtin-test.c:428 #13 0x55ad9b6f28fb in test_and_print tests/builtin-test.c:458 #14 0x55ad9b6f4a53 in __cmd_test tests/builtin-test.c:679 #15 0x55ad9b6f4a53 in cmd_test tests/builtin-test.c:825 #16 0x55ad9b760cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x55ad9b5eaa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x55ad9b5eaa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #19 0x55ad9b5eaa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #20 0x7fcb669acd09 in __libc_start_main ../csu/libc-start.c:308 ... SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Object code reading: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. $ perf test -v 28 28: Use a dummy software event to keep tracking: --- start --- test child forked, pid 156810 mmap size 528384B ================================================================= ==156810==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f637d2bce8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55cc6295cffa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55cc6295da1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x55cc6295e1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x55cc6295e1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x55cc626287cf in test__keep_tracking tests/keep-tracking.c:84 #6 0x55cc625e38fb in run_test tests/builtin-test.c:428 #7 0x55cc625e38fb in test_and_print tests/builtin-test.c:458 #8 0x55cc625e5a53 in __cmd_test tests/builtin-test.c:679 #9 0x55cc625e5a53 in cmd_test tests/builtin-test.c:825 #10 0x55cc62651cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x55cc624dba88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x55cc624dba88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x55cc624dba88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7f637cdf2d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Use a dummy software event to keep tracking: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The evlist and cpu/thread maps should be released together. Otherwise the following error was reported by Asan. $ perf test -v 35 35: Track with sched_switch : --- start --- test child forked, pid 159287 Using CPUID GenuineIntel-6-8E-C mmap size 528384B 1295 events recorded ================================================================= ==159287==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7fa28d9a2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x5652f5a5affa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x5652f5a5ba1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x5652f5a5c1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x5652f5a5c1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x5652f5723bbf in test__switch_tracking tests/switch-tracking.c:350 #6 0x5652f56e18fb in run_test tests/builtin-test.c:428 #7 0x5652f56e18fb in test_and_print tests/builtin-test.c:458 #8 0x5652f56e3a53 in __cmd_test tests/builtin-test.c:679 #9 0x5652f56e3a53 in cmd_test tests/builtin-test.c:825 #10 0x5652f574fcc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x5652f55d9a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x5652f55d9a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x5652f55d9a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7fa28d4d8d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Track with sched_switch: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

It missed to call perf_thread_map__put() after using the map. $ perf test -v 43 43: Synthesize thread map : --- start --- test child forked, pid 162640 ================================================================= ==162640==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fd48cdaa1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164 #1 0x563e6d5f8d0e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23 #2 0x563e6d3ef69a in thread_map__new_by_pid util/thread_map.c:46 #3 0x563e6d2cec90 in test__thread_map_synthesize tests/thread-map.c:97 #4 0x563e6d27d8fb in run_test tests/builtin-test.c:428 #5 0x563e6d27d8fb in test_and_print tests/builtin-test.c:458 #6 0x563e6d27fa53 in __cmd_test tests/builtin-test.c:679 #7 0x563e6d27fa53 in cmd_test tests/builtin-test.c:825 #8 0x563e6d2ebce4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #9 0x563e6d175a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #10 0x563e6d175a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #11 0x563e6d175a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #12 0x7fd48c8dfd09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 8224 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Synthesize thread map: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

It should be released after printing the map. $ perf test -v 52 52: Print cpu map : --- start --- test child forked, pid 172233 ================================================================= ==172233==ERROR: LeakSanitizer: detected memory leaks Direct leak of 156 byte(s) in 1 object(s) allocated from: #0 0x7fc472518e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55e63b378f7a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55e63b37a05c in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:237 #3 0x55e63b056d16 in cpu_map_print tests/cpumap.c:102 #4 0x55e63b056d16 in test__cpu_map_print tests/cpumap.c:120 #5 0x55e63afff8fb in run_test tests/builtin-test.c:428 #6 0x55e63afff8fb in test_and_print tests/builtin-test.c:458 #7 0x55e63b001a53 in __cmd_test tests/builtin-test.c:679 #8 0x55e63b001a53 in cmd_test tests/builtin-test.c:825 #9 0x55e63b06dc44 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #10 0x55e63aef7a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #11 0x55e63aef7a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #12 0x55e63aef7a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #13 0x7fc47204ed09 in __libc_start_main ../csu/libc-start.c:308 ... SUMMARY: AddressSanitizer: 448 byte(s) leaked in 7 allocation(s). test child finished with 1 ---- end ---- Print cpu map: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

It should release the maps at the end. $ perf test -v 71 71: Convert perf time to TSC : --- start --- test child forked, pid 178744 mmap size 528384B 1st event perf time 59207256505278 tsc 13187166645142 rdtsc time 59207256542151 tsc 13187166723020 2nd event perf time 59207256543749 tsc 13187166726393 ================================================================= ==178744==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7faf601f9e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55b620cfc00a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55b620cfca2f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x55b620cfd1ef in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x55b620cfd1ef in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x55b6209ef1b2 in test__perf_time_to_tsc tests/perf-time-to-tsc.c:73 #6 0x55b6209828fb in run_test tests/builtin-test.c:428 #7 0x55b6209828fb in test_and_print tests/builtin-test.c:458 #8 0x55b620984a53 in __cmd_test tests/builtin-test.c:679 #9 0x55b620984a53 in cmd_test tests/builtin-test.c:825 #10 0x55b6209f0cd4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #11 0x55b62087aa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #12 0x55b62087aa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #13 0x55b62087aa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #14 0x7faf5fd2fd09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Convert perf time to TSC: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

I got a segfault when using -r option with event groups. The option makes it run the workload multiple times and it will reuse the evlist and evsel for each run. While most of resources are allocated and freed properly, the id hash in the evlist was not and it resulted in the bug. You can see it with the address sanitizer like below: $ perf stat -r 100 -e '{cycles,instructions}' true ================================================================= ==693052==ERROR: AddressSanitizer: heap-use-after-free on address 0x6080000003d0 at pc 0x558c57732835 bp 0x7fff1526adb0 sp 0x7fff1526ada8 WRITE of size 8 at 0x6080000003d0 thread T0 #0 0x558c57732834 in hlist_add_head /home/namhyung/project/linux/tools/include/linux/list.h:644 #1 0x558c57732834 in perf_evlist__id_hash /home/namhyung/project/linux/tools/lib/perf/evlist.c:237 #2 0x558c57732834 in perf_evlist__id_add /home/namhyung/project/linux/tools/lib/perf/evlist.c:244 #3 0x558c57732834 in perf_evlist__id_add_fd /home/namhyung/project/linux/tools/lib/perf/evlist.c:285 #4 0x558c5747733e in store_evsel_ids util/evsel.c:2765 #5 0x558c5747733e in evsel__store_ids util/evsel.c:2782 #6 0x558c5730b717 in __run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:895 #7 0x558c5730b717 in run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:1014 #8 0x558c5730b717 in cmd_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:2446 #9 0x558c57427c24 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #10 0x558c572b1a48 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #11 0x558c572b1a48 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #12 0x558c572b1a48 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #13 0x7fcadb9f7d09 in __libc_start_main ../csu/libc-start.c:308 #14 0x558c572b60f9 in _start (/home/namhyung/project/linux/tools/perf/perf+0x45d0f9) Actually the nodes in the hash table are struct perf_stream_id and they were freed in the previous run. Fix it by resetting the hash. Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

I got several memory leak reports from Asan with a simple command. It was because VDSO is not released due to the refcount. Like in __dsos_addnew_id(), it should put the refcount after adding to the list. $ perf record true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ] ================================================================= ==692599==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce4aa8ee in dso__new_id util/dso.c:1256 #2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132 #3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347 #4 0x559bce50826c in map__new util/map.c:175 #5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #6 0x559bce512f6b in machines__deliver_event util/session.c:1481 #7 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #8 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #10 0x559bce519bea in __perf_session__process_events util/session.c:2268 #11 0x559bce519bea in perf_session__process_events util/session.c:2297 #12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce520907 in nsinfo__copy util/namespaces.c:169 #2 0x559bce50821b in map__new util/map.c:168 #3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #4 0x559bce512f6b in machines__deliver_event util/session.c:1481 #5 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #6 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #8 0x559bce519bea in __perf_session__process_events util/session.c:2268 #9 0x559bce519bea in perf_session__process_events util/session.c:2297 #10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

The following deadlock is detected: truncate -> setattr path is waiting for pending direct IO to be done (inode->i_dio_count become zero) with inode->i_rwsem held (down_write). PID: 14827 TASK: ffff881686a9af80 CPU: 20 COMMAND: "ora_p005_hrltd9" #0 __schedule at ffffffff818667cc #1 schedule at ffffffff81866de6 #2 inode_dio_wait at ffffffff812a2d04 #3 ocfs2_setattr at ffffffffc05f322e [ocfs2] #4 notify_change at ffffffff812a5a09 #5 do_truncate at ffffffff812808f5 #6 do_sys_ftruncate.constprop.18 at ffffffff81280cf2 #7 sys_ftruncate at ffffffff81280d8e #8 do_syscall_64 at ffffffff81003949 #9 entry_SYSCALL_64_after_hwframe at ffffffff81a001ad dio completion path is going to complete one direct IO (decrement inode->i_dio_count), but before that it hung at locking inode->i_rwsem: #0 __schedule+700 at ffffffff818667cc #1 schedule+54 at ffffffff81866de6 #2 rwsem_down_write_failed+536 at ffffffff8186aa28 #3 call_rwsem_down_write_failed+23 at ffffffff8185a1b7 #4 down_write+45 at ffffffff81869c9d #5 ocfs2_dio_end_io_write+180 at ffffffffc05d5444 [ocfs2] #6 ocfs2_dio_end_io+85 at ffffffffc05d5a85 [ocfs2] #7 dio_complete+140 at ffffffff812c873c #8 dio_aio_complete_work+25 at ffffffff812c89f9 #9 process_one_work+361 at ffffffff810b1889 #10 worker_thread+77 at ffffffff810b233d #11 kthread+261 at ffffffff810b7fd5 #12 ret_from_fork+62 at ffffffff81a0035e Thus above forms ABBA deadlock. The same deadlock was mentioned in upstream commit 28f5a8a ("ocfs2: should wait dio before inode lock in ocfs2_setattr()"). It seems that that commit only removed the cluster lock (the victim of above dead lock) from the ABBA deadlock party. End-user visible effects: Process hang in truncate -> ocfs2_setattr path and other processes hang at ocfs2_dio_end_io_write path. This is to fix the deadlock itself. It removes inode_lock() call from dio completion path to remove the deadlock and add ip_alloc_sem lock in setattr path to synchronize the inode modifications. [[email protected]: remove the "had_alloc_lock" as suggested] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Wengang Wang <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

ASan reported a memory leak caused by info_linear not being deallocated. The info_linear was allocated during in perf_event__synthesize_one_bpf_prog(). This patch adds the corresponding free() when bpf_prog_info_node is freed in perf_env__purge_bpf(). $ sudo ./perf record -- sleep 5 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ] ================================================================= ==297735==ERROR: LeakSanitizer: detected memory leaks Direct leak of 7688 byte(s) in 19 object(s) allocated from: #0 0x4f420f in malloc (/home/user/linux/tools/perf/perf+0x4f420f) #1 0xc06a74 in bpf_program__get_prog_info_linear /home/user/linux/tools/lib/bpf/libbpf.c:11113:16 #2 0xb426fe in perf_event__synthesize_one_bpf_prog /home/user/linux/tools/perf/util/bpf-event.c:191:16 #3 0xb42008 in perf_event__synthesize_bpf_events /home/user/linux/tools/perf/util/bpf-event.c:410:9 #4 0x594596 in record__synthesize /home/user/linux/tools/perf/builtin-record.c:1490:8 #5 0x58c9ac in __cmd_record /home/user/linux/tools/perf/builtin-record.c:1798:8 #6 0x58990b in cmd_record /home/user/linux/tools/perf/builtin-record.c:2901:8 #7 0x7b2a20 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #8 0x7b12ff in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #9 0x7b2583 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #10 0x7b0d79 in main /home/user/linux/tools/perf/perf.c:539:3 #11 0x7fa357ef6b74 in __libc_start_main /usr/src/debug/glibc-2.33-8.fc34.x86_64/csu/../csu/libc-start.c:332:16 Signed-off-by: Riccardo Mancini <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Fastabend <[email protected]> Cc: KP Singh <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Yonghong Song <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

ASan reports a heap-buffer-overflow in elf_sec__is_text when using perf-top. The bug is caused by the fact that secstrs is built from runtime_ss, while shdr is built from syms_ss if shdr.sh_type != SHT_NOBITS. Therefore, they point to two different ELF files. This patch renames secstrs to secstrs_run and adds secstrs_sym, so that the correct secstrs is chosen depending on shdr.sh_type. $ ASAN_OPTIONS=abort_on_error=1:disable_coredump=0:unmap_shadow_on_exit=1 ./perf top ================================================================= ==363148==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61300009add6 at pc 0x00000049875c bp 0x7f4f56446440 sp 0x7f4f56445bf0 READ of size 1 at 0x61300009add6 thread T6 #0 0x49875b in StrstrCheck(void*, char*, char const*, char const*) (/home/user/linux/tools/perf/perf+0x49875b) #1 0x4d13a2 in strstr (/home/user/linux/tools/perf/perf+0x4d13a2) #2 0xacae36 in elf_sec__is_text /home/user/linux/tools/perf/util/symbol-elf.c:176:9 #3 0xac3ec9 in elf_sec__filter /home/user/linux/tools/perf/util/symbol-elf.c:187:9 #4 0xac2c3d in dso__load_sym /home/user/linux/tools/perf/util/symbol-elf.c:1254:20 #5 0x883981 in dso__load /home/user/linux/tools/perf/util/symbol.c:1897:9 #6 0x8e6248 in map__load /home/user/linux/tools/perf/util/map.c:332:7 #7 0x8e66e5 in map__find_symbol /home/user/linux/tools/perf/util/map.c:366:6 #8 0x7f8278 in machine__resolve /home/user/linux/tools/perf/util/event.c:707:13 #9 0x5f3d1a in perf_event__process_sample /home/user/linux/tools/perf/builtin-top.c:773:6 #10 0x5f30e4 in deliver_event /home/user/linux/tools/perf/builtin-top.c:1197:3 #11 0x908a72 in do_flush /home/user/linux/tools/perf/util/ordered-events.c:244:9 #12 0x905fae in __ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:323:8 #13 0x9058db in ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:341:9 #14 0x5f19b1 in process_thread /home/user/linux/tools/perf/builtin-top.c:1109:7 #15 0x7f4f6a21a298 in start_thread /usr/src/debug/glibc-2.33-16.fc34.x86_64/nptl/pthread_create.c:481:8 #16 0x7f4f697d0352 in clone ../sysdeps/unix/sysv/linux/x86_64/clone.S:95 0x61300009add6 is located 10 bytes to the right of 332-byte region [0x61300009ac80,0x61300009adcc) allocated by thread T6 here: #0 0x4f3f7f in malloc (/home/user/linux/tools/perf/perf+0x4f3f7f) #1 0x7f4f6a0a88d9 (/lib64/libelf.so.1+0xa8d9) Thread T6 created by T0 here: #0 0x464856 in pthread_create (/home/user/linux/tools/perf/perf+0x464856) #1 0x5f06e0 in __cmd_top /home/user/linux/tools/perf/builtin-top.c:1309:6 #2 0x5ef19f in cmd_top /home/user/linux/tools/perf/builtin-top.c:1762:11 #3 0x7b28c0 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #4 0x7b119f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 #5 0x7b2423 in run_argv /home/user/linux/tools/perf/perf.c:409:2 #6 0x7b0c19 in main /home/user/linux/tools/perf/perf.c:539:3 #7 0x7f4f696f7b74 in __libc_start_main /usr/src/debug/glibc-2.33-16.fc34.x86_64/csu/../csu/libc-start.c:332:16 SUMMARY: AddressSanitizer: heap-buffer-overflow (/home/user/linux/tools/perf/perf+0x49875b) in StrstrCheck(void*, char*, char const*, char const*) Shadow bytes around the buggy address: 0x0c268000b560: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b570: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b580: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0c268000b5b0: 00 00 00 00 00 00 00 00 00 04[fa]fa fa fa fa fa 0x0c268000b5c0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 0x0c268000b5d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5f0: 07 fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb Shadow gap: cc ==363148==ABORTING Suggested-by: Jiri Slaby <[email protected]> Signed-off-by: Riccardo Mancini <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Fabian Hemmer <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Jiri Slaby <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Remi Bernon <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <[email protected]> CC: Milian Wolff <[email protected]> Cc: Jiri Olsa <[email protected]> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/[email protected] Reported-by: Juri Lelli <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

FD uses xyarray__entry that may return NULL if an index is out of bounds. If NULL is returned then a segv happens as FD unconditionally dereferences the pointer. This was happening in a case of with perf iostat as shown below. The fix is to make FD an "int*" rather than an int and handle the NULL case as either invalid input or a closed fd. $ sudo gdb --args perf stat --iostat list ... Breakpoint 1, perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 50 { (gdb) bt #0 perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 #1 0x000055555585c188 in evsel__open_cpu (evsel=0x5555560951a0, cpus=0x555556093410, threads=0x555556086fb0, start_cpu=0, end_cpu=1) at util/evsel.c:1792 #2 0x000055555585cfb2 in evsel__open (evsel=0x5555560951a0, cpus=0x0, threads=0x555556086fb0) at util/evsel.c:2045 #3 0x000055555585d0db in evsel__open_per_thread (evsel=0x5555560951a0, threads=0x555556086fb0) at util/evsel.c:2065 #4 0x00005555558ece64 in create_perf_stat_counter (evsel=0x5555560951a0, config=0x555555c34700 <stat_config>, target=0x555555c2f1c0 <target>, cpu=0) at util/stat.c:590 #5 0x000055555578e927 in __run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:833 #6 0x000055555578f3c6 in run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:1048 #7 0x0000555555792ee5 in cmd_stat (argc=1, argv=0x7fffffffe4a0) at builtin-stat.c:2534 #8 0x0000555555835ed3 in run_builtin (p=0x555555c3f540 <commands+288>, argc=3, argv=0x7fffffffe4a0) at perf.c:313 #9 0x0000555555836154 in handle_internal_command (argc=3, argv=0x7fffffffe4a0) at perf.c:365 #10 0x000055555583629f in run_argv (argcp=0x7fffffffe2ec, argv=0x7fffffffe2e0) at perf.c:409 #11 0x0000555555836692 in main (argc=3, argv=0x7fffffffe4a0) at perf.c:539 ... (gdb) c Continuing. Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/). /bin/dmesg | grep -i perf may provide additional information. Program received signal SIGSEGV, Segmentation fault. 0x00005555559b03ea in perf_evsel__close_fd_cpu (evsel=0x5555560951a0, cpu=1) at evsel.c:166 166 if (FD(evsel, cpu, thread) >= 0) v3. fixes a bug in perf_evsel__run_ioctl where the sense of a branch was backward. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

devm_regmap_init may return error which caused by like out of memory, this will results in null pointer dereference later when reading or writing register: general protection fault in encx24j600_spi_probe KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 0 PID: 286 Comm: spi-encx24j600- Not tainted 5.15.0-rc2-00142-g9978db750e31-dirty #11 9c53a778c1306b1b02359f3c2bbedc0222cba652 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:regcache_cache_bypass drivers/base/regmap/regcache.c:540 Code: 54 41 89 f4 55 53 48 89 fb 48 83 ec 08 e8 26 94 a8 fe 48 8d bb a0 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 03 00 00 4c 8d ab b0 00 00 00 48 8b ab a0 00 RSP: 0018:ffffc900010476b8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: fffffffffffffff4 RCX: 0000000000000000 RDX: 0000000000000012 RSI: ffff888002de0000 RDI: 0000000000000094 RBP: ffff888013c9a000 R08: 0000000000000000 R09: fffffbfff3f9cc6a R10: ffffc900010476e8 R11: fffffbfff3f9cc69 R12: 0000000000000001 R13: 000000000000000a R14: ffff888013c9af54 R15: ffff888013c9ad08 FS: 00007ffa984ab580(0000) GS:ffff88801fe00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a6384136c8 CR3: 000000003bbe6003 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: encx24j600_spi_probe drivers/net/ethernet/microchip/encx24j600.c:459 spi_probe drivers/spi/spi.c:397 really_probe drivers/base/dd.c:517 __driver_probe_device drivers/base/dd.c:751 driver_probe_device drivers/base/dd.c:782 __device_attach_driver drivers/base/dd.c:899 bus_for_each_drv drivers/base/bus.c:427 __device_attach drivers/base/dd.c:971 bus_probe_device drivers/base/bus.c:487 device_add drivers/base/core.c:3364 __spi_add_device drivers/spi/spi.c:599 spi_add_device drivers/spi/spi.c:641 spi_new_device drivers/spi/spi.c:717 new_device_store+0x18c/0x1f1 [spi_stub 4e02719357f1ff33f5a43d00630982840568e85e] dev_attr_store drivers/base/core.c:2074 sysfs_kf_write fs/sysfs/file.c:139 kernfs_fop_write_iter fs/kernfs/file.c:300 new_sync_write fs/read_write.c:508 (discriminator 4) vfs_write fs/read_write.c:594 ksys_write fs/read_write.c:648 do_syscall_64 arch/x86/entry/common.c:50 entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:113 Add error check in devm_regmap_init_encx24j600 to avoid this situation. Fixes: 04fbfce ("net: Microchip encx24j600 driver") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Nanyong Sun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

The exit function fixes a memory leak with the src field as detected by leak sanitizer. An example of which is: Indirect leak of 25133184 byte(s) in 207 object(s) allocated from: #0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803 #2 0x55defe6397e4 in symbol__hists util/annotate.c:952 #3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968 #4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119 #5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182 #6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236 #7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315 #8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473 #9 0x55defe731e38 in machines__deliver_event util/session.c:1510 #10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590 #11 0x55defe72951e in ordered_events__deliver_event util/session.c:183 #12 0x55defe740082 in do_flush util/ordered-events.c:244 #13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323 #14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341 #15 0x55defe73837f in __perf_session__process_events util/session.c:2390 #16 0x55defe7385ff in perf_session__process_events util/session.c:2420 ... Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin Liška <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

Per HiFive Unleashed schematics, the card detect signal of the micro SD card is connected to gpio pin #11, which should be reflected in the DT via the <gpios> property, as described in Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt. [1] https://sifive.cdn.prismic.io/sifive/c52a8e32-05ce-4aaf-95c8-7bf8453f8698_hifive-unleashed-a00-schematics-1.pdf Signed-off-by: Bin Meng <[email protected]> Fixes: d573b55 ("riscv: dts: add initial board data for the SiFive HiFive Unmatched") Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>

If the key is already present then free the key used for lookup. Found with: $ perf stat -M IO_Read_BW /bin/true ==1749112==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 4 object(s) allocated from: #0 0x7f6f6fa7d7cf in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55acecd9d7a6 in check_per_pkg util/stat.c:343 #2 0x55acecd9d9c5 in process_counter_values util/stat.c:365 #3 0x55acecd9e0ab in process_counter_maps util/stat.c:421 #4 0x55acecd9e292 in perf_stat_process_counter util/stat.c:443 #5 0x55aceca8553e in read_counters ./tools/perf/builtin-stat.c:470 #6 0x55aceca88fe3 in __run_perf_stat ./tools/perf/builtin-stat.c:1023 #7 0x55aceca89146 in run_perf_stat ./tools/perf/builtin-stat.c:1048 #8 0x55aceca90858 in cmd_stat ./tools/perf/builtin-stat.c:2555 #9 0x55acecc05fa5 in run_builtin ./tools/perf/perf.c:313 #10 0x55acecc064fe in handle_internal_command ./tools/perf/perf.c:365 #11 0x55acecc068bb in run_argv ./tools/perf/perf.c:409 #12 0x55acecc070aa in main ./tools/perf/perf.c:539 Reviewed-by: James Clark <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Mike Leach <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Clarke <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Suzuki Poulouse <[email protected]> Cc: Vineet Singh <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]>

Kernel panic when injecting memory_failure for the global huge_zero_page, when CONFIG_DEBUG_VM is enabled, as follows. Injecting memory failure for pfn 0x109ff9 at process virtual address 0x20ff9000 page:00000000fb053fc3 refcount:2 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x109e00 head:00000000fb053fc3 order:9 compound_mapcount:0 compound_pincount:0 flags: 0x17fffc000010001(locked|head|node=0|zone=2|lastcpupid=0x1ffff) raw: 017fffc000010001 0000000000000000 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000002ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(is_huge_zero_page(head)) ------------[ cut here ]------------ kernel BUG at mm/huge_memory.c:2499! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 553 Comm: split_bug Not tainted 5.18.0-rc1+ #11 Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 3288b3c 04/01/2014 RIP: 0010:split_huge_page_to_list+0x66a/0x880 Code: 84 9b fb ff ff 48 8b 7c 24 08 31 f6 e8 9f 5d 2a 00 b8 b8 02 00 00 e9 e8 fb ff ff 48 c7 c6 e8 47 3c 82 4c b RSP: 0018:ffffc90000dcbdf8 EFLAGS: 00010246 RAX: 000000000000003c RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff823e4c4f RDI: 00000000ffffffff RBP: ffff88843fffdb40 R08: 0000000000000000 R09: 00000000fffeffff R10: ffffc90000dcbc48 R11: ffffffff82d68448 R12: ffffea0004278000 R13: ffffffff823c6203 R14: 0000000000109ff9 R15: ffffea000427fe40 FS: 00007fc375a26740(0000) GS:ffff88842fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc3757c9290 CR3: 0000000102174006 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: try_to_split_thp_page+0x3a/0x130 memory_failure+0x128/0x800 madvise_inject_error.cold+0x8b/0xa1 __x64_sys_madvise+0x54/0x60 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc3754f8bf9 Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8 RSP: 002b:00007ffeda93a1d8 EFLAGS: 00000217 ORIG_RAX: 000000000000001c RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc3754f8bf9 RDX: 0000000000000064 RSI: 0000000000003000 RDI: 0000000020ff9000 RBP: 00007ffeda93a200 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000ffffffff R11: 0000000000000217 R12: 0000000000400490 R13: 00007ffeda93a2e0 R14: 0000000000000000 R15: 0000000000000000 This makes huge_zero_page bail out explicitly before split in memory_failure(), thus the panic above won't happen again. Link: https://lkml.kernel.org/r/497d3835612610e370c74e697ea3c721d1d55b9c.1649775850.git.xuyu@linux.alibaba.com Fixes: 6a46079 ("HWPOISON: The high level memory error handler in the VM v7") Signed-off-by: Xu Yu <[email protected]> Reported-by: Abaci <[email protected]> Suggested-by: Naoya Horiguchi <[email protected]> Acked-by: Naoya Horiguchi <[email protected]> Reviewed-by: Miaohe Lin <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: Oscar Salvador <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

Kernel panic when injecting memory_failure for the global huge_zero_page, when CONFIG_DEBUG_VM is enabled, as follows. Injecting memory failure for pfn 0x109ff9 at process virtual address 0x20ff9000 page:00000000fb053fc3 refcount:2 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x109e00 head:00000000fb053fc3 order:9 compound_mapcount:0 compound_pincount:0 flags: 0x17fffc000010001(locked|head|node=0|zone=2|lastcpupid=0x1ffff) raw: 017fffc000010001 0000000000000000 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000002ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(is_huge_zero_page(head)) ------------[ cut here ]------------ kernel BUG at mm/huge_memory.c:2499! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 553 Comm: split_bug Not tainted 5.18.0-rc1+ #11 Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 3288b3c 04/01/2014 RIP: 0010:split_huge_page_to_list+0x66a/0x880 Code: 84 9b fb ff ff 48 8b 7c 24 08 31 f6 e8 9f 5d 2a 00 b8 b8 02 00 00 e9 e8 fb ff ff 48 c7 c6 e8 47 3c 82 4c b RSP: 0018:ffffc90000dcbdf8 EFLAGS: 00010246 RAX: 000000000000003c RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff823e4c4f RDI: 00000000ffffffff RBP: ffff88843fffdb40 R08: 0000000000000000 R09: 00000000fffeffff R10: ffffc90000dcbc48 R11: ffffffff82d68448 R12: ffffea0004278000 R13: ffffffff823c6203 R14: 0000000000109ff9 R15: ffffea000427fe40 FS: 00007fc375a26740(0000) GS:ffff88842fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc3757c9290 CR3: 0000000102174006 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: try_to_split_thp_page+0x3a/0x130 memory_failure+0x128/0x800 madvise_inject_error.cold+0x8b/0xa1 __x64_sys_madvise+0x54/0x60 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc3754f8bf9 Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8 RSP: 002b:00007ffeda93a1d8 EFLAGS: 00000217 ORIG_RAX: 000000000000001c RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc3754f8bf9 RDX: 0000000000000064 RSI: 0000000000003000 RDI: 0000000020ff9000 RBP: 00007ffeda93a200 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000ffffffff R11: 0000000000000217 R12: 0000000000400490 R13: 00007ffeda93a2e0 R14: 0000000000000000 R15: 0000000000000000 We think that raising BUG is overkilling for splitting huge_zero_page, the huge_zero_page can't be met from normal paths other than memory failure, but memory failure is a valid caller. So we tend to replace the BUG to WARN + returning -EBUSY, and thus the panic above won't happen again. Link: https://lkml.kernel.org/r/f35f8b97377d5d3ede1bc5ac3114da888c57cbce.1651052574.git.xuyu@linux.alibaba.com Fixes: d173d54 ("mm/memory-failure.c: skip huge_zero_page in memory_failure()") Fixes: 6a46079 ("HWPOISON: The high level memory error handler in the VM v7") Signed-off-by: Xu Yu <[email protected]> Suggested-by: Yang Shi <[email protected]> Reported-by: kernel test robot <[email protected]> Reviewed-by: Naoya Horiguchi <[email protected]> Reviewed-by: Yang Shi <[email protected]> Reviewed-by: Miaohe Lin <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

Do not allow to write timestamps on RX rings if PF is being configured. When PF is being configured RX rings can be freed or rebuilt. If at the same time timestamps are updated, the kernel will crash by dereferencing null RX ring pointer. PID: 1449 TASK: ff187d28ed658040 CPU: 34 COMMAND: "ice-ptp-0000:51" #0 [ff1966a94a713bb0] machine_kexec at ffffffff9d05a0be smfrench#1 [ff1966a94a713c08] __crash_kexec at ffffffff9d192e9d smfrench#2 [ff1966a94a713cd0] crash_kexec at ffffffff9d1941bd smfrench#3 [ff1966a94a713ce8] oops_end at ffffffff9d01bd54 smfrench#4 [ff1966a94a713d08] no_context at ffffffff9d06bda4 smfrench#5 [ff1966a94a713d60] __bad_area_nosemaphore at ffffffff9d06c10c smfrench#6 [ff1966a94a713da8] do_page_fault at ffffffff9d06cae4 smfrench#7 [ff1966a94a713de0] page_fault at ffffffff9da0107e [exception RIP: ice_ptp_update_cached_phctime+91] RIP: ffffffffc076db8b RSP: ff1966a94a713e98 RFLAGS: 00010246 RAX: 16e3db9c6b7ccae4 RBX: ff187d269dd3c180 RCX: ff187d269cd4d018 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff187d269cfcc644 R8: ff187d339b9641b0 R9: 0000000000000000 R10: 0000000000000002 R11: 0000000000000000 R12: ff187d269cfcc648 R13: ffffffff9f128784 R14: ffffffff9d101b70 R15: ff187d269cfcc640 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 smfrench#8 [ff1966a94a713ea0] ice_ptp_periodic_work at ffffffffc076dbef [ice] smfrench#9 [ff1966a94a713ee0] kthread_worker_fn at ffffffff9d101c1b smfrench#10 [ff1966a94a713f10] kthread at ffffffff9d101b4d smfrench#11 [ff1966a94a713f50] ret_from_fork at ffffffff9da0023f Fixes: 77a7811 ("ice: enable receive hardware timestamping") Signed-off-by: Arkadiusz Kubalewski <[email protected]> Reviewed-by: Michal Schmidt <[email protected]> Tested-by: Dave Cain <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>

[ 8743.393379] ====================================================== [ 8743.393385] WARNING: possible circular locking dependency detected [ 8743.393391] 6.4.0-rc1+ #11 Tainted: G OE [ 8743.393397] ------------------------------------------------------ [ 8743.393402] kworker/0:2/12921 is trying to acquire lock: [ 8743.393408] ffff888127a14460 (sb_writers#8){.+.+}-{0:0}, at: ksmbd_vfs_setxattr+0x3d/0xd0 [ksmbd] [ 8743.393510] but task is already holding lock: [ 8743.393515] ffff8880360d97f0 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: ksmbd_vfs_kern_path_locked+0x181/0x670 [ksmbd] [ 8743.393618] which lock already depends on the new lock. [ 8743.393623] the existing dependency chain (in reverse order) is: [ 8743.393628] -> #1 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}: [ 8743.393648] down_write_nested+0x9a/0x1b0 [ 8743.393660] filename_create+0x128/0x270 [ 8743.393670] do_mkdirat+0xab/0x1f0 [ 8743.393680] __x64_sys_mkdir+0x47/0x60 [ 8743.393690] do_syscall_64+0x5d/0x90 [ 8743.393701] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 8743.393711] -> #0 (sb_writers#8){.+.+}-{0:0}: [ 8743.393728] __lock_acquire+0x2201/0x3b80 [ 8743.393737] lock_acquire+0x18f/0x440 [ 8743.393746] mnt_want_write+0x5f/0x240 [ 8743.393755] ksmbd_vfs_setxattr+0x3d/0xd0 [ksmbd] [ 8743.393839] ksmbd_vfs_set_dos_attrib_xattr+0xcc/0x110 [ksmbd] [ 8743.393924] compat_ksmbd_vfs_set_dos_attrib_xattr+0x39/0x50 [ksmbd] [ 8743.394010] smb2_open+0x3432/0x3cc0 [ksmbd] [ 8743.394099] handle_ksmbd_work+0x2c9/0x7b0 [ksmbd] [ 8743.394187] process_one_work+0x65a/0xb30 [ 8743.394198] worker_thread+0x2cf/0x700 [ 8743.394209] kthread+0x1ad/0x1f0 [ 8743.394218] ret_from_fork+0x29/0x50 This patch add mnt_want_write() above parent inode lock and remove nested mnt_want_write calls in smb2_open(). Fixes: 40b268d ("ksmbd: add mnt_want_write to ksmbd vfs functions") Reported-by: Marios Makassikis <[email protected]> Signed-off-by: Namjae Jeon <[email protected]>

[ 8743.393379] ====================================================== [ 8743.393385] WARNING: possible circular locking dependency detected [ 8743.393391] 6.4.0-rc1+ #11 Tainted: G OE [ 8743.393397] ------------------------------------------------------ [ 8743.393402] kworker/0:2/12921 is trying to acquire lock: [ 8743.393408] ffff888127a14460 (sb_writers#8){.+.+}-{0:0}, at: ksmbd_vfs_setxattr+0x3d/0xd0 [ksmbd] [ 8743.393510] but task is already holding lock: [ 8743.393515] ffff8880360d97f0 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: ksmbd_vfs_kern_path_locked+0x181/0x670 [ksmbd] [ 8743.393618] which lock already depends on the new lock. [ 8743.393623] the existing dependency chain (in reverse order) is: [ 8743.393628] -> #1 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}: [ 8743.393648] down_write_nested+0x9a/0x1b0 [ 8743.393660] filename_create+0x128/0x270 [ 8743.393670] do_mkdirat+0xab/0x1f0 [ 8743.393680] __x64_sys_mkdir+0x47/0x60 [ 8743.393690] do_syscall_64+0x5d/0x90 [ 8743.393701] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 8743.393711] -> #0 (sb_writers#8){.+.+}-{0:0}: [ 8743.393728] __lock_acquire+0x2201/0x3b80 [ 8743.393737] lock_acquire+0x18f/0x440 [ 8743.393746] mnt_want_write+0x5f/0x240 [ 8743.393755] ksmbd_vfs_setxattr+0x3d/0xd0 [ksmbd] [ 8743.393839] ksmbd_vfs_set_dos_attrib_xattr+0xcc/0x110 [ksmbd] [ 8743.393924] compat_ksmbd_vfs_set_dos_attrib_xattr+0x39/0x50 [ksmbd] [ 8743.394010] smb2_open+0x3432/0x3cc0 [ksmbd] [ 8743.394099] handle_ksmbd_work+0x2c9/0x7b0 [ksmbd] [ 8743.394187] process_one_work+0x65a/0xb30 [ 8743.394198] worker_thread+0x2cf/0x700 [ 8743.394209] kthread+0x1ad/0x1f0 [ 8743.394218] ret_from_fork+0x29/0x50 This patch add mnt_want_write() above parent inode lock and remove nested mnt_want_write calls in smb2_open(). Fixes: 40b268d ("ksmbd: add mnt_want_write to ksmbd vfs functions") Cc: [email protected] Reported-by: Marios Makassikis <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>

…f-times' Eduard Zingerman says: ==================== verify callbacks as if they are called unknown number of times This series updates verifier logic for callback functions handling. Current master simulates callback body execution exactly once, which leads to verifier not detecting unsafe programs like below: static int unsafe_on_zero_iter_cb(__u32 idx, struct num_context *ctx) { ctx->i = 0; return 0; } SEC("?raw_tp") int unsafe_on_zero_iter(void *unused) { struct num_context loop_ctx = { .i = 32 }; __u8 choice_arr[2] = { 0, 1 }; bpf_loop(100, unsafe_on_zero_iter_cb, &loop_ctx, 0); return choice_arr[loop_ctx.i]; } This was reported previously in [0]. The basic idea of the fix is to schedule callback entry state for verification in env->head until some identical, previously visited state in current DFS state traversal is found. Same logic as with open coded iterators, and builds on top recent fixes [1] for those. The series is structured as follows: - patches #1,2,3 update strobemeta, xdp_synproxy selftests and bpf_loop_bench benchmark to allow convergence of the bpf_loop callback states; - patches #4,5 just shuffle the code a bit; - patch #6 is the main part of the series; - patch #7 adds test cases for #6; - patch #8 extend patch #6 with same speculative scalar widening logic, as used for open coded iterators; - patch #9 adds test cases for #8; - patch #10 extends patch #6 to track maximal number of callback executions specifically for bpf_loop(); - patch #11 adds test cases for #10. Veristat results comparing this series to master+patches #1,2,3 using selftests show the following difference: File Program States (A) States (B) States (DIFF) ------------------------- ------------- ---------- ---------- ------------- bpf_loop_bench.bpf.o benchmark 1 2 +1 (+100.00%) pyperf600_bpf_loop.bpf.o on_event 322 407 +85 (+26.40%) strobemeta_bpf_loop.bpf.o on_event 113 151 +38 (+33.63%) xdp_synproxy_kern.bpf.o syncookie_tc 341 291 -50 (-14.66%) xdp_synproxy_kern.bpf.o syncookie_xdp 344 301 -43 (-12.50%) Veristat results comparing this series to master using Tetragon BPF files [2] also show some differences. States diff varies from +2% to +15% on 23 programs out of 186, no new failures. Changelog: - V3 [5] -> V4, changes suggested by Andrii: - validate mark_chain_precision() result in patch #10; - renaming s/cumulative_callback_depth/callback_unroll_depth/. - V2 [4] -> V3: - fixes in expected log messages for test cases: - callback_result_precise; - parent_callee_saved_reg_precise_with_callback; - parent_stack_slot_precise_with_callback; - renamings (suggested by Alexei): - s/callback_iter_depth/cumulative_callback_depth/ - s/is_callback_iter_next/calls_callback/ - s/mark_callback_iter_next/mark_calls_callback/ - prepare_func_exit() updated to exit with -EFAULT when callee->in_callback_fn is true but calls_callback() is not true for callsite; - test case 'bpf_loop_iter_limit_nested' rewritten to use return value check instead of verifier log message checks (suggested by Alexei). - V1 [3] -> V2, changes suggested by Andrii: - small changes for error handling code in __check_func_call(); - callback body processing log is now matched in relevant verifier_subprog_precision.c tests; - R1 passed to bpf_loop() is now always marked as precise; - log level 2 message for bpf_loop() iteration termination instead of iteration depth messages; - __no_msg macro removed; - bpf_loop_iter_limit_nested updated to avoid using __no_msg; - commit message for patch #3 updated according to Alexei's request. [0] https://lore.kernel.org/bpf/CA+vRuzPChFNXmouzGG+wsy=6eMcfr1mFG0F3g7rbg-sedGKW3w@mail.gmail.com/ [1] https://lore.kernel.org/bpf/[email protected]/ [2] [email protected]:cilium/tetragon.git [3] https://lore.kernel.org/bpf/[email protected]/T/#t [4] https://lore.kernel.org/bpf/[email protected]/T/#t [5] https://lore.kernel.org/bpf/[email protected]/T/#t ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>

When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/[email protected] Suggested-by: "Ismail, Mustafa" <[email protected]> Signed-off-by: Shifeng Li <[email protected]> Reviewed-by: Shiraz Saleem <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>

[BUG] There is a bug report that, on a ext4-converted btrfs, scrub leads to various problems, including: - "unable to find chunk map" errors BTRFS info (device vdb): scrub: started on devid 1 BTRFS critical (device vdb): unable to find chunk map for logical 2214744064 length 4096 BTRFS critical (device vdb): unable to find chunk map for logical 2214744064 length 45056 This would lead to unrepariable errors. - Use-after-free KASAN reports: ================================================================== BUG: KASAN: slab-use-after-free in __blk_rq_map_sg+0x18f/0x7c0 Read of size 8 at addr ffff8881013c9040 by task btrfs/909 CPU: 0 PID: 909 Comm: btrfs Not tainted 6.7.0-x64v3-dbg #11 c50636e9419a8354555555245df535e380563b2b Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 2023.11-2 12/24/2023 Call Trace: <TASK> dump_stack_lvl+0x43/0x60 print_report+0xcf/0x640 kasan_report+0xa6/0xd0 __blk_rq_map_sg+0x18f/0x7c0 virtblk_prep_rq.isra.0+0x215/0x6a0 [virtio_blk 19a65eeee9ae6fcf02edfad39bb9ddee07dcdaff] virtio_queue_rqs+0xc4/0x310 [virtio_blk 19a65eeee9ae6fcf02edfad39bb9ddee07dcdaff] blk_mq_flush_plug_list.part.0+0x780/0x860 __blk_flush_plug+0x1ba/0x220 blk_finish_plug+0x3b/0x60 submit_initial_group_read+0x10a/0x290 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] flush_scrub_stripes+0x38e/0x430 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] scrub_stripe+0x82a/0xae0 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] scrub_chunk+0x178/0x200 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] scrub_enumerate_chunks+0x4bc/0xa30 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] btrfs_scrub_dev+0x398/0x810 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] btrfs_ioctl+0x4b9/0x3020 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] __x64_sys_ioctl+0xbd/0x100 do_syscall_64+0x5d/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7f47e5e0952b - Crash, mostly due to above use-after-free [CAUSE] The converted fs has the following data chunk layout: item 2 key (FIRST_CHUNK_TREE CHUNK_ITEM 2214658048) itemoff 16025 itemsize 80 length 86016 owner 2 stripe_len 65536 type DATA|single For above logical bytenr 2214744064, it's at the chunk end (2214658048 + 86016 = 2214744064). This means btrfs_submit_bio() would split the bio, and trigger endio function for both of the two halves. However scrub_submit_initial_read() would only expect the endio function to be called once, not any more. This means the first endio function would already free the bbio::bio, leaving the bvec freed, thus the 2nd endio call would lead to use-after-free. [FIX] - Make sure scrub_read_endio() only updates bits in its range Since we may read less than 64K at the end of the chunk, we should not touch the bits beyond chunk boundary. - Make sure scrub_submit_initial_read() only to read the chunk range This is done by calculating the real number of sectors we need to read, and add sector-by-sector to the bio. Thankfully the scrub read repair path won't need extra fixes: - scrub_stripe_submit_repair_read() With above fixes, we won't update error bit for range beyond chunk, thus scrub_stripe_submit_repair_read() should never submit any read beyond the chunk. Reported-by: Rongrong <[email protected]> Fixes: e02ee89 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure") Tested-by: Rongrong <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>

syzkaller reported infinite recursive calls of fib6_dump_done() during netlink socket destruction. [1] From the log, syzkaller sent an AF_UNSPEC RTM_GETROUTE message, and then the response was generated. The following recvmmsg() resumed the dump for IPv6, but the first call of inet6_dump_fib() failed at kzalloc() due to the fault injection. [0] 12:01:34 executing program 3: r0 = socket$nl_route(0x10, 0x3, 0x0) sendmsg$nl_route(r0, ... snip ...) recvmmsg(r0, ... snip ...) (fail_nth: 8) Here, fib6_dump_done() was set to nlk_sk(sk)->cb.done, and the next call of inet6_dump_fib() set it to nlk_sk(sk)->cb.args[3]. syzkaller stopped receiving the response halfway through, and finally netlink_sock_destruct() called nlk_sk(sk)->cb.done(). fib6_dump_done() calls fib6_dump_end() and nlk_sk(sk)->cb.done() if it is still not NULL. fib6_dump_end() rewrites nlk_sk(sk)->cb.done() by nlk_sk(sk)->cb.args[3], but it has the same function, not NULL, calling itself recursively and hitting the stack guard page. To avoid the issue, let's set the destructor after kzalloc(). [0]: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 1 PID: 432110 Comm: syz-executor.3 Not tainted 6.8.0-12821-g537c2e91d354-dirty #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) should_fail_ex (lib/fault-inject.c:52 lib/fault-inject.c:153) should_failslab (mm/slub.c:3733) kmalloc_trace (mm/slub.c:3748 mm/slub.c:3827 mm/slub.c:3992) inet6_dump_fib (./include/linux/slab.h:628 ./include/linux/slab.h:749 net/ipv6/ip6_fib.c:662) rtnl_dump_all (net/core/rtnetlink.c:4029) netlink_dump (net/netlink/af_netlink.c:2269) netlink_recvmsg (net/netlink/af_netlink.c:1988) ____sys_recvmsg (net/socket.c:1046 net/socket.c:2801) ___sys_recvmsg (net/socket.c:2846) do_recvmmsg (net/socket.c:2943) __x64_sys_recvmmsg (net/socket.c:3041 net/socket.c:3034 net/socket.c:3034) [1]: BUG: TASK stack guard page was hit at 00000000f2fa9af1 (stack is 00000000b7912430..000000009a436beb) stack guard page: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 223719 Comm: kworker/1:3 Not tainted 6.8.0-12821-g537c2e91d354-dirty #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: events netlink_sock_destruct_work RIP: 0010:fib6_dump_done (net/ipv6/ip6_fib.c:570) Code: 3c 24 e8 f3 e9 51 fd e9 28 fd ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 41 57 41 56 41 55 41 54 55 48 89 fd <53> 48 8d 5d 60 e8 b6 4d 07 fd 48 89 da 48 b8 00 00 00 00 00 fc ff RSP: 0018:ffffc9000d980000 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffffffff84405990 RCX: ffffffff844059d3 RDX: ffff8881028e0000 RSI: ffffffff84405ac2 RDI: ffff88810c02f358 RBP: ffff88810c02f358 R08: 0000000000000007 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000224 R12: 0000000000000000 R13: ffff888007c82c78 R14: ffff888007c82c68 R15: ffff888007c82c68 FS: 0000000000000000(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000d97fff8 CR3: 0000000102309002 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <#DF> </#DF> <TASK> fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) ... fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) netlink_sock_destruct (net/netlink/af_netlink.c:401) __sk_destruct (net/core/sock.c:2177 (discriminator 2)) sk_destruct (net/core/sock.c:2224) __sk_free (net/core/sock.c:2235) sk_free (net/core/sock.c:2246) process_one_work (kernel/workqueue.c:3259) worker_thread (kernel/workqueue.c:3329 kernel/workqueue.c:3416) kthread (kernel/kthread.c:388) ret_from_fork (arch/x86/kernel/process.c:153) ret_from_fork_asm (arch/x86/entry/entry_64.S:256) Modules linked in: Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzkaller <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

The buffer is used to save register mapping in a sample. Normally perf samples don't have any register so the string should be empty. But it missed to initialize the buffer when the size is 0. And it's passed to PyUnicode_FromString() with a garbage data. So it returns NULL due to invalid input (instead of an empty unicode string object) which causes a segfault like below: Thread 2.1 "perf" received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7ffff7c83780 (LWP 193775)] 0x00007ffff6dbca2e in PyDict_SetItem () from /lib/x86_64-linux-gnu/libpython3.11.so.1.0 (gdb) bt #0 0x00007ffff6dbca2e in PyDict_SetItem () from /lib/x86_64-linux-gnu/libpython3.11.so.1.0 #1 0x00007ffff6dbf848 in PyDict_SetItemString () from /lib/x86_64-linux-gnu/libpython3.11.so.1.0 #2 0x000055555575824d in pydict_set_item_string_decref (val=0x0, key=0x5555557f96e3 "iregs", dict=0x7ffff5f7f780) at util/scripting-engines/trace-event-python.c:145 #3 set_regs_in_dict (evsel=0x555555efc370, sample=0x7fffffffb870, dict=0x7ffff5f7f780) at util/scripting-engines/trace-event-python.c:776 #4 get_perf_sample_dict (sample=sample@entry=0x7fffffffb870, evsel=evsel@entry=0x555555efc370, al=al@entry=0x7fffffffb2e0, addr_al=addr_al@entry=0x0, callchain=callchain@entry=0x7ffff63ef440) at util/scripting-engines/trace-event-python.c:923 #5 0x0000555555758ec1 in python_process_tracepoint (sample=0x7fffffffb870, evsel=0x555555efc370, al=0x7fffffffb2e0, addr_al=0x0) at util/scripting-engines/trace-event-python.c:1044 #6 0x00005555555c5db8 in process_sample_event (tool=<optimized out>, event=<optimized out>, sample=<optimized out>, evsel=0x555555efc370, machine=0x555555ef4d68) at builtin-script.c:2421 #7 0x00005555556b7793 in perf_session__deliver_event (session=0x555555ef4b60, event=0x7ffff62ff7d0, tool=0x7fffffffc150, file_offset=30672, file_path=0x555555efb8a0 "perf.data") at util/session.c:1639 #8 0x00005555556bc864 in do_flush (show_progress=true, oe=0x555555efb700) at util/ordered-events.c:245 #9 __ordered_events__flush (oe=oe@entry=0x555555efb700, how=how@entry=OE_FLUSH__FINAL, timestamp=timestamp@entry=0) at util/ordered-events.c:324 #10 0x00005555556bd06e in ordered_events__flush (oe=oe@entry=0x555555efb700, how=how@entry=OE_FLUSH__FINAL) at util/ordered-events.c:342 #11 0x00005555556b9d63 in __perf_session__process_events (session=0x555555ef4b60) at util/session.c:2465 #12 perf_session__process_events (session=0x555555ef4b60) at util/session.c:2627 #13 0x00005555555cb1d0 in __cmd_script (script=0x7fffffffc150) at builtin-script.c:2839 #14 cmd_script (argc=<optimized out>, argv=<optimized out>) at builtin-script.c:4365 #15 0x0000555555650811 in run_builtin (p=p@entry=0x555555ed8948 <commands+456>, argc=argc@entry=4, argv=argv@entry=0x7fffffffe240) at perf.c:323 #16 0x0000555555597eb3 in handle_internal_command (argv=0x7fffffffe240, argc=4) at perf.c:377 #17 run_argv (argv=<synthetic pointer>, argcp=<synthetic pointer>) at perf.c:421 #18 main (argc=4, argv=0x7fffffffe240) at perf.c:537 Fixes: 51cfe7a ("perf python: Avoid 2 leak sanitizer issues") Cc: Peter Zijlstra <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Ingo Molnar <[email protected]> Acked-by: Ian Rogers <[email protected]> Signed-off-by: Namhyung Kim <[email protected]>

vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

The dev_tracker is added to ax25_cb in ax25_bind(). When the ax25 device is detaching, the dev_tracker of ax25_cb should be deallocated in ax25_kill_by_device() instead of the dev_tracker of ax25_dev. The log reported by ref_tracker is shown below: [ 80.884935] ref_tracker: reference already released. [ 80.885150] ref_tracker: allocated in: [ 80.885349] ax25_dev_device_up+0x105/0x540 [ 80.885730] ax25_device_event+0xa4/0x420 [ 80.885730] notifier_call_chain+0xc9/0x1e0 [ 80.885730] __dev_notify_flags+0x138/0x280 [ 80.885730] dev_change_flags+0xd7/0x180 [ 80.885730] dev_ifsioc+0x6a9/0xa30 [ 80.885730] dev_ioctl+0x4d8/0xd90 [ 80.885730] sock_do_ioctl+0x1c2/0x2d0 [ 80.885730] sock_ioctl+0x38b/0x4f0 [ 80.885730] __se_sys_ioctl+0xad/0xf0 [ 80.885730] do_syscall_64+0xc4/0x1b0 [ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 80.885730] ref_tracker: freed in: [ 80.885730] ax25_device_event+0x272/0x420 [ 80.885730] notifier_call_chain+0xc9/0x1e0 [ 80.885730] dev_close_many+0x272/0x370 [ 80.885730] unregister_netdevice_many_notify+0x3b5/0x1180 [ 80.885730] unregister_netdev+0xcf/0x120 [ 80.885730] sixpack_close+0x11f/0x1b0 [ 80.885730] tty_ldisc_kill+0xcb/0x190 [ 80.885730] tty_ldisc_hangup+0x338/0x3d0 [ 80.885730] __tty_hangup+0x504/0x740 [ 80.885730] tty_release+0x46e/0xd80 [ 80.885730] __fput+0x37f/0x770 [ 80.885730] __x64_sys_close+0x7b/0xb0 [ 80.885730] do_syscall_64+0xc4/0x1b0 [ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 80.893739] ------------[ cut here ]------------ [ 80.894030] WARNING: CPU: 2 PID: 140 at lib/ref_tracker.c:255 ref_tracker_free+0x47b/0x6b0 [ 80.894297] Modules linked in: [ 80.894929] CPU: 2 PID: 140 Comm: ax25_conn_rel_6 Not tainted 6.9.0-rc4-g8cd26fd90c1a #11 [ 80.895190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qem4 [ 80.895514] RIP: 0010:ref_tracker_free+0x47b/0x6b0 [ 80.895808] Code: 83 c5 18 4c 89 eb 48 c1 eb 03 8a 04 13 84 c0 0f 85 df 01 00 00 41 83 7d 00 00 75 4b 4c 89 ff 9 [ 80.896171] RSP: 0018:ffff888009edf8c0 EFLAGS: 00000286 [ 80.896339] RAX: 1ffff1100141ac00 RBX: 1ffff1100149463b RCX: dffffc0000000000 [ 80.896502] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff88800a0d6518 [ 80.896925] RBP: ffff888009edf9b0 R08: ffff88806d3288d3 R09: 1ffff1100da6511a [ 80.897212] R10: dffffc0000000000 R11: ffffed100da6511b R12: ffff88800a4a31d4 [ 80.897859] R13: ffff88800a4a31d8 R14: dffffc0000000000 R15: ffff88800a0d6518 [ 80.898279] FS: 00007fd88b7fe700(0000) GS:ffff88806d300000(0000) knlGS:0000000000000000 [ 80.899436] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 80.900181] CR2: 00007fd88c001d48 CR3: 000000000993e000 CR4: 00000000000006f0 ... [ 80.935774] ref_tracker: sp%d@000000000bb9df3d has 1/1 users at [ 80.935774] ax25_bind+0x424/0x4e0 [ 80.935774] __sys_bind+0x1d9/0x270 [ 80.935774] __x64_sys_bind+0x75/0x80 [ 80.935774] do_syscall_64+0xc4/0x1b0 [ 80.935774] entry_SYSCALL_64_after_hwframe+0x67/0x6f Change ax25_dev->dev_tracker to the dev_tracker of ax25_cb in order to mitigate the bug. Fixes: feef318 ("ax25: fix UAF bugs of net_device caused by rebinding operation") Signed-off-by: Duoming Zhou <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

[ Upstream commit f8bbc07 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 467324b ] The dev_tracker is added to ax25_cb in ax25_bind(). When the ax25 device is detaching, the dev_tracker of ax25_cb should be deallocated in ax25_kill_by_device() instead of the dev_tracker of ax25_dev. The log reported by ref_tracker is shown below: [ 80.884935] ref_tracker: reference already released. [ 80.885150] ref_tracker: allocated in: [ 80.885349] ax25_dev_device_up+0x105/0x540 [ 80.885730] ax25_device_event+0xa4/0x420 [ 80.885730] notifier_call_chain+0xc9/0x1e0 [ 80.885730] __dev_notify_flags+0x138/0x280 [ 80.885730] dev_change_flags+0xd7/0x180 [ 80.885730] dev_ifsioc+0x6a9/0xa30 [ 80.885730] dev_ioctl+0x4d8/0xd90 [ 80.885730] sock_do_ioctl+0x1c2/0x2d0 [ 80.885730] sock_ioctl+0x38b/0x4f0 [ 80.885730] __se_sys_ioctl+0xad/0xf0 [ 80.885730] do_syscall_64+0xc4/0x1b0 [ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 80.885730] ref_tracker: freed in: [ 80.885730] ax25_device_event+0x272/0x420 [ 80.885730] notifier_call_chain+0xc9/0x1e0 [ 80.885730] dev_close_many+0x272/0x370 [ 80.885730] unregister_netdevice_many_notify+0x3b5/0x1180 [ 80.885730] unregister_netdev+0xcf/0x120 [ 80.885730] sixpack_close+0x11f/0x1b0 [ 80.885730] tty_ldisc_kill+0xcb/0x190 [ 80.885730] tty_ldisc_hangup+0x338/0x3d0 [ 80.885730] __tty_hangup+0x504/0x740 [ 80.885730] tty_release+0x46e/0xd80 [ 80.885730] __fput+0x37f/0x770 [ 80.885730] __x64_sys_close+0x7b/0xb0 [ 80.885730] do_syscall_64+0xc4/0x1b0 [ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 80.893739] ------------[ cut here ]------------ [ 80.894030] WARNING: CPU: 2 PID: 140 at lib/ref_tracker.c:255 ref_tracker_free+0x47b/0x6b0 [ 80.894297] Modules linked in: [ 80.894929] CPU: 2 PID: 140 Comm: ax25_conn_rel_6 Not tainted 6.9.0-rc4-g8cd26fd90c1a #11 [ 80.895190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qem4 [ 80.895514] RIP: 0010:ref_tracker_free+0x47b/0x6b0 [ 80.895808] Code: 83 c5 18 4c 89 eb 48 c1 eb 03 8a 04 13 84 c0 0f 85 df 01 00 00 41 83 7d 00 00 75 4b 4c 89 ff 9 [ 80.896171] RSP: 0018:ffff888009edf8c0 EFLAGS: 00000286 [ 80.896339] RAX: 1ffff1100141ac00 RBX: 1ffff1100149463b RCX: dffffc0000000000 [ 80.896502] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff88800a0d6518 [ 80.896925] RBP: ffff888009edf9b0 R08: ffff88806d3288d3 R09: 1ffff1100da6511a [ 80.897212] R10: dffffc0000000000 R11: ffffed100da6511b R12: ffff88800a4a31d4 [ 80.897859] R13: ffff88800a4a31d8 R14: dffffc0000000000 R15: ffff88800a0d6518 [ 80.898279] FS: 00007fd88b7fe700(0000) GS:ffff88806d300000(0000) knlGS:0000000000000000 [ 80.899436] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 80.900181] CR2: 00007fd88c001d48 CR3: 000000000993e000 CR4: 00000000000006f0 ... [ 80.935774] ref_tracker: sp%d@000000000bb9df3d has 1/1 users at [ 80.935774] ax25_bind+0x424/0x4e0 [ 80.935774] __sys_bind+0x1d9/0x270 [ 80.935774] __x64_sys_bind+0x75/0x80 [ 80.935774] do_syscall_64+0xc4/0x1b0 [ 80.935774] entry_SYSCALL_64_after_hwframe+0x67/0x6f Change ax25_dev->dev_tracker to the dev_tracker of ax25_cb in order to mitigate the bug. Fixes: feef318 ("ax25: fix UAF bugs of net_device caused by rebinding operation") Signed-off-by: Duoming Zhou <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 #5 0x55c94045c776 in ui_browser__show ui/browser.c:288 #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ben Gainey <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Li Dong <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Oliver Upton <[email protected]> Cc: Paran Lee <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Sun Haiyong <[email protected]> Cc: Tim Chen <[email protected]> Cc: Yanteng Si <[email protected]> Cc: Yicong Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

In the XDP_TX path, ionic driver sends a packet to the TX path with rx page and corresponding dma address. After tx is done, ionic_tx_clean() frees that page. But RX ring buffer isn't reset to NULL. So, it uses a freed page, which causes kernel panic. BUG: unable to handle page fault for address: ffff8881576c110c PGD 773801067 P4D 773801067 PUD 87f086067 PMD 87efca067 PTE 800ffffea893e060 Oops: Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI CPU: 1 PID: 25 Comm: ksoftirqd/1 Not tainted 6.9.0+ #11 Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f Code: 00 53 41 55 41 56 41 57 b8 01 00 00 00 48 8b 5f 08 4c 8b 77 00 4c 89 f7 48 83 c7 0e 48 39 d8 RSP: 0018:ffff888104e6fa28 EFLAGS: 00010283 RAX: 0000000000000002 RBX: ffff8881576c1140 RCX: 0000000000000002 RDX: ffffffffc0051f64 RSI: ffffc90002d33048 RDI: ffff8881576c110e RBP: ffff888104e6fa88 R08: 0000000000000000 R09: ffffed1027a04a23 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881b03a21a8 R13: ffff8881589f800f R14: ffff8881576c1100 R15: 00000001576c1100 FS: 0000000000000000(0000) GS:ffff88881ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8881576c110c CR3: 0000000767a90000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x254/0x790 ? __pfx_page_fault_oops+0x10/0x10 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? search_bpf_extables+0x165/0x260 ? fixup_exception+0x4a/0x970 ? exc_page_fault+0xcb/0xe0 ? asm_exc_page_fault+0x22/0x30 ? 0xffffffffc0051f64 ? bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f ? do_raw_spin_unlock+0x54/0x220 ionic_rx_service+0x11ab/0x3010 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_clean+0x29b/0xc60 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_tx_clean+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_cq_service+0x25d/0xa00 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_cq_service+0x69/0x150 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_txrx_napi+0x11a/0x540 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] __napi_poll.constprop.0+0xa0/0x440 net_rx_action+0x7e7/0xc30 ? __pfx_net_rx_action+0x10/0x10 Fixes: 8eeed83 ("ionic: Add XDP_TX support") Signed-off-by: Taehee Yoo <[email protected]> Reviewed-by: Shannon Nelson <[email protected]> Reviewed-by: Brett Creeley <[email protected]> Signed-off-by: David S. Miller <[email protected]>

We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: [email protected] # 6.1+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Signed-off-by: David Sterba <[email protected]>

…PLES event" This reverts commit 7d1405c. This causes segfaults in some cases, as reported by Milian: ``` sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e raw_syscalls:sys_enter ls ... [ perf record: Woken up 3 times to write data ] malloc(): invalid next size (unsorted) Aborted ``` Backtrace with GDB + debuginfod: ``` malloc(): invalid next size (unsorted) Thread 1 "perf" received signal SIGABRT, Aborted. __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c 44 return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO (ret) : 0; (gdb) bt #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 #1 0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>, signo=6) at pthread_kill.c:78 #2 0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/ raise.c:26 #3 0x00007ffff6e384c3 in __GI_abort () at abort.c:79 #4 0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea "%s\n") at ../sysdeps/posix/libc_fatal.c:132 #5 0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850 "malloc(): invalid next size (unsorted)") at malloc.c:5772 #6 0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0 <main_arena>, bytes=bytes@entry=368) at malloc.c:4081 #7 0x00007ffff6eb877e in __libc_calloc (n=<optimized out>, elem_size=<optimized out>) at malloc.c:3754 #8 0x000055555569bdb6 in perf_session.do_write_header () #9 0x00005555555a373a in __cmd_record.constprop.0 () #10 0x00005555555a6846 in cmd_record () #11 0x000055555564db7f in run_builtin () #12 0x000055555558ed77 in main () ``` Valgrind memcheck: ``` ==45136== Invalid write of size 8 ==45136== at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf) ==45136== by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ==45136== Syscall param write(buf) points to unaddressable byte(s) ==45136== at 0x575953D: __libc_write (write.c:26) ==45136== by 0x575953D: write (write.c:24) ==45136== by 0x35761F: ion (in /usr/bin/perf) ==45136== by 0x357778: writen (in /usr/bin/perf) ==45136== by 0x1548F7: record__write (in /usr/bin/perf) ==45136== by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ----- Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/ Reported-by: Milian Wolff <[email protected]> Tested-by: Milian Wolff <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] # 6.8+ Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1 Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

[ Upstream commit 769e6a1 ] ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 #5 0x55c94045c776 in ui_browser__show ui/browser.c:288 #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ben Gainey <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Li Dong <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Oliver Upton <[email protected]> Cc: Paran Lee <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Sun Haiyong <[email protected]> Cc: Tim Chen <[email protected]> Cc: Yanteng Si <[email protected]> Cc: Yicong Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 9d274c1 upstream. We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: [email protected] # 6.1+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

[ Upstream commit 769e6a1 ] ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 #5 0x55c94045c776 in ui_browser__show ui/browser.c:288 #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ben Gainey <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Li Dong <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Oliver Upton <[email protected]> Cc: Paran Lee <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Sun Haiyong <[email protected]> Cc: Tim Chen <[email protected]> Cc: Yanteng Si <[email protected]> Cc: Yicong Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…PLES event" commit 5b3cde1 upstream. This reverts commit 7d1405c. This causes segfaults in some cases, as reported by Milian: ``` sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e raw_syscalls:sys_enter ls ... [ perf record: Woken up 3 times to write data ] malloc(): invalid next size (unsorted) Aborted ``` Backtrace with GDB + debuginfod: ``` malloc(): invalid next size (unsorted) Thread 1 "perf" received signal SIGABRT, Aborted. __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c 44 return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO (ret) : 0; (gdb) bt #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 #1 0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>, signo=6) at pthread_kill.c:78 #2 0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/ raise.c:26 #3 0x00007ffff6e384c3 in __GI_abort () at abort.c:79 #4 0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea "%s\n") at ../sysdeps/posix/libc_fatal.c:132 #5 0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850 "malloc(): invalid next size (unsorted)") at malloc.c:5772 #6 0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0 <main_arena>, bytes=bytes@entry=368) at malloc.c:4081 #7 0x00007ffff6eb877e in __libc_calloc (n=<optimized out>, elem_size=<optimized out>) at malloc.c:3754 #8 0x000055555569bdb6 in perf_session.do_write_header () #9 0x00005555555a373a in __cmd_record.constprop.0 () #10 0x00005555555a6846 in cmd_record () #11 0x000055555564db7f in run_builtin () #12 0x000055555558ed77 in main () ``` Valgrind memcheck: ``` ==45136== Invalid write of size 8 ==45136== at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf) ==45136== by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ==45136== Syscall param write(buf) points to unaddressable byte(s) ==45136== at 0x575953D: __libc_write (write.c:26) ==45136== by 0x575953D: write (write.c:24) ==45136== by 0x35761F: ion (in /usr/bin/perf) ==45136== by 0x357778: writen (in /usr/bin/perf) ==45136== by 0x1548F7: record__write (in /usr/bin/perf) ==45136== by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ----- Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/ Reported-by: Milian Wolff <[email protected]> Tested-by: Milian Wolff <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] # 6.8+ Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1 Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 9d274c1 upstream. We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: [email protected] # 6.1+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 491aee8 ] In the XDP_TX path, ionic driver sends a packet to the TX path with rx page and corresponding dma address. After tx is done, ionic_tx_clean() frees that page. But RX ring buffer isn't reset to NULL. So, it uses a freed page, which causes kernel panic. BUG: unable to handle page fault for address: ffff8881576c110c PGD 773801067 P4D 773801067 PUD 87f086067 PMD 87efca067 PTE 800ffffea893e060 Oops: Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI CPU: 1 PID: 25 Comm: ksoftirqd/1 Not tainted 6.9.0+ #11 Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f Code: 00 53 41 55 41 56 41 57 b8 01 00 00 00 48 8b 5f 08 4c 8b 77 00 4c 89 f7 48 83 c7 0e 48 39 d8 RSP: 0018:ffff888104e6fa28 EFLAGS: 00010283 RAX: 0000000000000002 RBX: ffff8881576c1140 RCX: 0000000000000002 RDX: ffffffffc0051f64 RSI: ffffc90002d33048 RDI: ffff8881576c110e RBP: ffff888104e6fa88 R08: 0000000000000000 R09: ffffed1027a04a23 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881b03a21a8 R13: ffff8881589f800f R14: ffff8881576c1100 R15: 00000001576c1100 FS: 0000000000000000(0000) GS:ffff88881ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8881576c110c CR3: 0000000767a90000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x254/0x790 ? __pfx_page_fault_oops+0x10/0x10 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? search_bpf_extables+0x165/0x260 ? fixup_exception+0x4a/0x970 ? exc_page_fault+0xcb/0xe0 ? asm_exc_page_fault+0x22/0x30 ? 0xffffffffc0051f64 ? bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f ? do_raw_spin_unlock+0x54/0x220 ionic_rx_service+0x11ab/0x3010 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_clean+0x29b/0xc60 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_tx_clean+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_cq_service+0x25d/0xa00 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_cq_service+0x69/0x150 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_txrx_napi+0x11a/0x540 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] __napi_poll.constprop.0+0xa0/0x440 net_rx_action+0x7e7/0xc30 ? __pfx_net_rx_action+0x10/0x10 Fixes: 8eeed83 ("ionic: Add XDP_TX support") Signed-off-by: Taehee Yoo <[email protected]> Reviewed-by: Shannon Nelson <[email protected]> Reviewed-by: Brett Creeley <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Remove the dma_unmap_page_attrs() call in the driver's XDP_REDIRECT code path. This should have been removed when we let the page pool handle the DMA mapping. This bug causes the warning: WARNING: CPU: 7 PID: 59 at drivers/iommu/dma-iommu.c:1198 iommu_dma_unmap_page+0xd5/0x100 CPU: 7 PID: 59 Comm: ksoftirqd/7 Tainted: G W 6.8.0-1010-gcp #11-Ubuntu Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 2.15.2 04/02/2024 RIP: 0010:iommu_dma_unmap_page+0xd5/0x100 Code: 89 ee 48 89 df e8 cb f2 69 ff 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 31 f6 31 ff 45 31 c0 e9 ab 17 71 00 <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 RSP: 0018:ffffab1fc0597a48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff99ff838280c8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffab1fc0597a78 R08: 0000000000000002 R09: ffffab1fc0597c1c R10: ffffab1fc0597cd3 R11: ffff99ffe375acd8 R12: 00000000e65b9000 R13: 0000000000000050 R14: 0000000000001000 R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffff9a06efb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000565c34c37210 CR3: 00000005c7e3e000 CR4: 0000000000350ef0 ? show_regs+0x6d/0x80 ? __warn+0x89/0x150 ? iommu_dma_unmap_page+0xd5/0x100 ? report_bug+0x16a/0x190 ? handle_bug+0x51/0xa0 ? exc_invalid_op+0x18/0x80 ? iommu_dma_unmap_page+0xd5/0x100 ? iommu_dma_unmap_page+0x35/0x100 dma_unmap_page_attrs+0x55/0x220 ? bpf_prog_4d7e87c0d30db711_xdp_dispatcher+0x64/0x9f bnxt_rx_xdp+0x237/0x520 [bnxt_en] bnxt_rx_pkt+0x640/0xdd0 [bnxt_en] __bnxt_poll_work+0x1a1/0x3d0 [bnxt_en] bnxt_poll+0xaa/0x1e0 [bnxt_en] __napi_poll+0x33/0x1e0 net_rx_action+0x18a/0x2f0 Fixes: 578fcfd ("bnxt_en: Let the page pool manage the DMA mapping") Reviewed-by: Andy Gospodarek <[email protected]> Reviewed-by: Kalesh AP <[email protected]> Signed-off-by: Somnath Kotur <[email protected]> Signed-off-by: Michael Chan <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <[email protected]> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <[email protected]>

Daniel Machon says: ==================== net: lan966x: use the newly introduced FDMA library This patch series is the second of a 2-part series [1], that adds a new common FDMA library for Microchip switch chips Sparx5 and lan966x. These chips share the same FDMA engine, and as such will benefit from a common library with a common implementation. This also has the benefit of removing a lot of open-coded bookkeeping and duplicate code for the two drivers. In this second series, the FDMA library will be taken into use by the lan966x switch driver. ################### # Example of use: # ################### - Initialize the rx and tx fdma structs with values for: number of DCB's, number of DB's, channel ID, DB size (data buffer size), and total size of the requested memory. Also provide two callbacks: nextptr_cb() and dataptr_cb() for getting the nextptr and dataptr. - Allocate memory using fdma_alloc_phys() or fdma_alloc_coherent(). - Initialize the DCB's with fdma_dcb_init(). - Add new DCB's with fdma_dcb_add(). - Free memory with fdma_free_phys() or fdma_free_coherent(). ##################### # Patch breakdown: # ##################### Patch #1: select FDMA library for lan966x. Patch #2: includes the fdma_api.h header and removes old symbols. Patch #3: replaces old rx and tx variables with equivalent ones from the fdma struct. Only the variables that can be changed without breaking traffic is changed in this patch. Patch #4: uses the library for allocation of rx buffers. This requires quite a bit of refactoring in this single patch. Patch #5: uses the library for adding DCB's in the rx path. Patch #6: uses the library for freeing rx buffers. Patch #7: uses the library for allocation of tx buffers. This requires quite a bit of refactoring in this single patch. Patch #8: uses the library for adding DCB's in the tx path. Patch #9: uses the library helpers in the tx path. Patch #10: ditch last_in_use variable and use library instead. Patch #11: uses library helpers throughout. Patch #12: refactor lan966x_fdma_reload() function. [1] https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Daniel Machon <[email protected]> ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

Eduard Zingerman says: ==================== no_caller_saved_registers attribute for helper calls This patch-set seeks to allow using no_caller_saved_registers gcc/clang attribute with some BPF helper functions (and kfuncs in the future). As documented in [1], this attribute means that function scratches only some of the caller saved registers defined by ABI. For BPF the set of such registers could be defined as follows: - R0 is scratched only if function is non-void; - R1-R5 are scratched only if corresponding parameter type is defined in the function prototype. The goal of the patch-set is to implement no_caller_saved_registers (nocsr for short) in a backwards compatible manner: - for kernels that support the feature, gain some performance boost from better register allocation; - for kernels that don't support the feature, allow programs execution with minor performance losses. To achieve this, use a scheme suggested by Alexei Starovoitov: - for nocsr calls clang allocates registers as-if relevant r0-r5 registers are not scratched by the call; - as a post-processing step, clang visits each nocsr call and adds spill/fill for every live r0-r5; - stack offsets used for spills/fills are allocated as lowest stack offsets in whole function and are not used for any other purpose; - when kernel loads a program, it looks for such patterns (nocsr function surrounded by spills/fills) and checks if spill/fill stack offsets are used exclusively in nocsr patterns; - if so, and if current JIT inlines the call to the nocsr function (e.g. a helper call), kernel removes unnecessary spill/fill pairs; - when old kernel loads a program, presence of spill/fill pairs keeps BPF program valid, albeit slightly less efficient. Corresponding clang/llvm changes are available in [2]. The patch-set uses bpf_get_smp_processor_id() function as a canary, making it the first helper with nocsr attribute. For example, consider the following program: #define __no_csr __attribute__((no_caller_saved_registers)) #define SEC(name) __attribute__((section(name), used)) #define bpf_printk(fmt, ...) bpf_trace_printk((fmt), sizeof(fmt), __VA_ARGS__) typedef unsigned int __u32; static long (* const bpf_trace_printk)(const char *fmt, __u32 fmt_size, ...) = (void *) 6; static __u32 (*const bpf_get_smp_processor_id)(void) __no_csr = (void *)8; SEC("raw_tp") int test(void *ctx) { __u32 task = bpf_get_smp_processor_id(); bpf_printk("ctx=%p, smp=%d", ctx, task); return 0; } char _license[] SEC("license") = "GPL"; Compiled (using [2]) as follows: $ clang --target=bpf -O2 -g -c -o nocsr.bpf.o nocsr.bpf.c $ llvm-objdump --no-show-raw-insn -Sd nocsr.bpf.o ... 3rd parameter for printk call removable spill/fill pair .--- 0: r3 = r1 | ; | __u32 task = bpf_get_smp_processor_id(); | | 1: *(u64 *)(r10 - 0x8) = r3 <----------| | 2: call 0x8 | | 3: r3 = *(u64 *)(r10 - 0x8) <----------' ; | bpf_printk("ctx=%p, smp=%d", ctx, task); | 4: r1 = 0x0 ll | 6: r2 = 0xf | 7: r4 = r0 '--> 8: call 0x6 ; return 0; 9: r0 = 0x0 10: exit Here is how the program looks after verifier processing: # bpftool prog load ./nocsr.bpf.o /sys/fs/bpf/nocsr-test # bpftool prog dump xlated pinned /sys/fs/bpf/nocsr-test int test(void * ctx): 0: (bf) r3 = r1 <--- 3rd printk parameter ; __u32 task = bpf_get_smp_processor_id(); 1: (b4) w0 = 197324 <--. inlined helper call, 2: (bf) r0 = &(void __percpu *)(r0) <--- spill/fill 3: (61) r0 = *(u32 *)(r0 +0) <--' pair removed ; bpf_printk("ctx=%p, smp=%d", ctx, task); 4: (18) r1 = map[id:5][0]+0 6: (b7) r2 = 15 7: (bf) r4 = r0 8: (85) call bpf_trace_printk#-125920 ; return 0; 9: (b7) r0 = 0 10: (95) exit [1] https://clang.llvm.org/docs/AttributeReference.html#no-caller-saved-registers [2] https://github.com/eddyz87/llvm-project/tree/bpf-no-caller-saved-registers Change list: - v3 -> v4: - When nocsr spills/fills are removed in the subprogram, allow these spills/fills to reside in [-MAX_BPF_STACK-48..MAX_BPF_STACK) range (suggested by Alexei); - Dropped patches with special handling for bpf_probe_read_kernel() (requested by Alexei); - Reset aux .nocsr_pattern and .nocsr_spills_num fields in check_nocsr_stack_contract() (requested by Andrii). Andrii, I have not added an additional flag to struct bpf_subprog_info, it currently does not have holes and I really don't like adding a bool field there just as an alternative indicator that nocsr is disabled. Indicator at the moment: - nocsr_stack_off >= S16_MIN means that nocsr rewrite is enabled; - nocsr_stack_off == S16_MIN means that nocsr rewrite is disabled. - v2 -> v3: - As suggested by Andrii, 'nocsr_stack_off' is no longer checked at rewrite time, instead mark_nocsr_patterns() now does two passes over BPF program: - on a first pass it computes the lowest stack spill offset for the subprogram; - on a second pass this offset is used to recognize nocsr pattern. - As suggested by Alexei, a new mechanic is added to work around a situation mentioned by Andrii, when more helper functions are marked as nocsr at compile time than current kernel supports: - all {spill*,helper call,fill*} patterns are now marked as insn_aux_data[*].nocsr_pattern, thus relaxing failure condition for check_nocsr_stack_contract(); - spill/fill pairs are not removed for patterns where helper can't be inlined; - see mark_nocsr_pattern_for_call() for details an example. - As suggested by Alexei, subprogram stack depth is now adjusted if all spill/fill pairs could be removed. This adjustment has to take place before optimize_bpf_loop(), hence the rewrite is moved from do_misc_fixups() to remove_nocsr_spills_fills() (again). - As suggested by Andrii, special measures are taken to work around bpf_probe_read_kernel() access to BPF stack, see patches 11, 12. Patch #11 is very simplistic, a more comprehensive solution would be to change the type of the third parameter of the bpf_probe_read_kernel() from ARG_ANYTHING to something else and not only check nocsr contract, but also propagate stack slot liveness information. However, such change would require update in struct bpf_call_arg_meta processing, which currently implies that every memory parameter is followed by a size parameter. I can work on these changes, please comment. - Stylistic changes suggested by Andrii. - Added acks from Andrii. - Dropped RFC tag. - v1 -> v2: - assume that functions inlined by either jit or verifier conform to no_caller_saved_registers contract (Andrii, Puranjay); - allow nocsr rewrite for bpf_get_smp_processor_id() on arm64 and riscv64 architectures (Puranjay); - __arch_{x86_64,arm64,riscv64} macro for test_loader; - moved remove_nocsr_spills_fills() inside do_misc_fixups() (Andrii); - moved nocsr pattern detection from check_cfg() to a separate pass (Andrii); - various stylistic/correctness changes according to Andrii's comments. Revisions: - v1 https://lore.kernel.org/bpf/[email protected]/ - v2 https://lore.kernel.org/bpf/[email protected]/ - v3 https://lore.kernel.org/bpf/[email protected]/ ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]>

The following kernel trace can be triggered with fstest generic/629 when executed against a filesystem with fast-commit feature enabled: INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 0 PID: 866 Comm: mount Not tainted 6.10.0+ #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x66/0x90 register_lock_class+0x759/0x7d0 __lock_acquire+0x85/0x2630 ? __find_get_block+0xb4/0x380 lock_acquire+0xd1/0x2d0 ? __ext4_journal_get_write_access+0xd5/0x160 _raw_spin_lock+0x33/0x40 ? __ext4_journal_get_write_access+0xd5/0x160 __ext4_journal_get_write_access+0xd5/0x160 ext4_reserve_inode_write+0x61/0xb0 __ext4_mark_inode_dirty+0x79/0x270 ? ext4_ext_replay_set_iblocks+0x2f8/0x450 ext4_ext_replay_set_iblocks+0x330/0x450 ext4_fc_replay+0x14c8/0x1540 ? jread+0x88/0x2e0 ? rcu_is_watching+0x11/0x40 do_one_pass+0x447/0xd00 jbd2_journal_recover+0x139/0x1b0 jbd2_journal_load+0x96/0x390 ext4_load_and_init_journal+0x253/0xd40 ext4_fill_super+0x2cc6/0x3180 ... In the replay path there's an attempt to lock sbi->s_bdev_wb_lock in function ext4_check_bdev_write_error(). Unfortunately, at this point this spinlock has not been initialized yet. Moving it's initialization to an earlier point in __ext4_fill_super() fixes this splat. Signed-off-by: Luis Henriques (SUSE) <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected]

namjaejeon and others added 2 commits October 13, 2020 22:55

smfrench merged commit de3e9c8 into smfrench:cifsd-for-next Oct 14, 2020

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Cifsd fixes #11

Cifsd fixes #11

namjaejeon commented Oct 14, 2020

Cifsd fixes #11

Cifsd fixes #11

Conversation

namjaejeon commented Oct 14, 2020